How do install Leopard from intel to ppc by Firewire?

Can anyone tell me how to install Leopard from my intel macbook to my older ppc? When I try to install from firewire it says that the drive is going to GUID and non-bootable. My DVD drive on the PPC isn't good enough for the Leopard DVD. Any suggestions are appreciated.

I'm not commenting on whether the type of Mac is compatible with the Leopard install.
I'll offer suggestion for the firewire install. The objective is to take the Leopard DVD and transfer in some way to a firewire drive to be able to boot a PPC Mac and complete a Leopard install to the PPC Mac.
How? Take a firewire external drive and partition it in two. One for your data and the other (7.2 gigs) max, for the ability to restore the Leopard DVD to that smaller partition. Once restored you'll be able to boot(using system startup control panel) and install Leopard to a PPC Mac.
The rule to follow is to use APM ie Apple Partition Map to boot PPC Macs. GUID mapping is for intel Macs. You use options within Disk Utility ti select which way to go. You cannot have both on one firewire hard drive. I use two firewire hard drives: one APM and the other GUID.
How to setup the small partition? Connect firewire drive to your PPC Mac. Open disk utility. Create your two partitions(remember when you do this the drive is formatted and all data is gone, so backup first). Remember to use option and select APM, although on a PPC Mac it should be by default and ditto if on an intel Mac for GUID. Once the partitioning is complete, select Restore and while using the left hand column(just read the instruction in the disk utility window) and assuming you now have the Leopard DVD on the desktop , drag the install OSX section from the left hand column to "source" and then drag the Leopard small partition from the left hand column to "destination." Wait 20 minutes and you are completed. Now you can boot from the firewire drive and install Leopard to a PPC Mac.

Similar Messages

  • How to install leopard from a DMG file instead of DVD

    How to install leopard from a DMG file instead of DVD, When i open this file, click restart, NOTHING happened!!!!!!

    Use Disk Utility to restore the DMG to a blank partition, then use the Startup Disk preferences pane to reboot from that partition. Why not just install from the DVD, though?

  • How to install Leopard from an external DVD reader?

    Hi,
    I've bought Leopard today. unfortunately, it's not yet installed on my PowerBook. As my SuperDrive is dead, I use now an external DVD (Lacie Portable DVD-RW), but it doesn't work. I can read the Leopard install DVD, but when it reboot, it reboot on my current installation.
    I've tried the following during the boot sequence:
    - alt pressed, but I can only see my main HDD
    - c pressed, but I boot on my current installation
    Can you tell me if it is possible to install Leopard from an external DVD, and how can I do that ?
    Thanks in advance.
    Regards,
    Emmanuel Di Pretoro

    Can you tell me if the same problem occur with a FireWire external DVD ?
    It does not occur on your model of Mac.
    (25504)

  • How to install Leopard in my iMac if it has no DL-DVD player?

    How to install Leopard in my iMac if it has no DL-DVD player?
    My eMac is:
    eMac G4/1.25 (USB 2.0) with 2GB RAM

    Most PPC Macs cannot boot OSX from USB, they need Firewire... that being said, out of 13 PPC Macs I had one that booted from USB Drives, including Flash Drives, it was my eMac/1.42GHz as a matter of fact, USB drives would show as a boot choice if I held the Option/alt key at bootup, (nowhere else), but It lost that ability when I reset the NVRAM.
    The USB boot workaround that works for some is...
    Connect the drive to your machine, and find out which partition the OS X system is installed on. I usually find this by going to Disk Utility and looking at the info for the partition on the USB disk with OS X. That is, disk2s3 is usually for a USB disk with no OS 9 drivers installed that is the second disk disk. disk3s9 might be a USB disk with OS 9 drivers that is considered the third disk. There are other ways of finding this out, but in my case, my disk is disk2s3 (the 3 on the end will come into play soon).
    Start up the machine in Open Firmware (this is the fun part). Hold Command-Option-F-F right after the machine is turned on.
    Here is the moment of truth. If this step does not work, I have had very limited success getting a machine to boot off USB2. In Open Firmware, type devalias, and you should get a list as output. In this list, look for ud, usually below where you see hd (ud is "USB Disk," I presume). If found, it will usually have beside it /pci@f2000000/usb@1/disk1, or something similar. Again, if you see this, I have not had this fail yet.
    Now type printenv boot-device, which will usually get you output of boot-device hd:,\\:tbxi. (See where this is going yet?)
    Type setenv boot-device ud:3,\\:tbxi where the number after the colon corresponds to that partition number we found in step two. You should get an ok back.
    Type printenv boot-device, and you should see the change displayed already. Something like:
    boot-device        ud:3,\\:tbxi        hd:,\\:tbxi"
    http://hints.macworld.com/article.php?story=20060301112336384
    You'd need to clone the Install Disc to a Flash Drive, or make a DMG of it then Restore it to the Flash drive.

  • How to install leopard again after formating hd and now it just allows me to download yosemite.

    how to install leopard again after formating hd and now it just allows me to download yosemite. When i insert the original cd of leopard it doesnt restart from it!!!
    I made a mistake formating hd without creating a bootable disk... So i started the process to install yosemite, then i formated the hd and forgot that the installer was no more in  applications because no more applications forlder!!! after the format it just allows me to install directly from app store which is taking 18 hours to download.
    I tried to restart with original leopard cd but it didnt recognize it and jump back to yosemite install from app store..
    What should i do?
    Can anyone help me please? thanks

    How did you even manage to start installing Yosemite? What operating system did you have before you upgraded? It wasn't Leopard, since you need Snow Leopard (10.6) to get to the App Store.
    Matt

  • How to boot leopard from cd?

    Hey guys,
    Maybe a silly question, but I need to know how to boot leopard from its insallation dvd, is that possible?
    I would like to boot my mac from dvd, so that i can then use the disk utility to partition my internal hard drive, and i think this is only possible if you dont boot from the hd it self.
    Obviously I am able to boot from the dvd in the way that it starts the leopard installation, but thats not what i need i guess? at least when the installation start, i dont see an option to start disk utility from there?
    so i need to actually boot the system from the dvd, in order to partition "on the fly" without losing the data on my disk.
    I hope someone knows.
    thanks in advance.
    cheers,

    Hi, 
    Boot from the Install disc. Select the Language. Then as soon as the menu bar appears you'll see a Utilities Menu. Select Disk Utility from there.
    cheers
    mrtotes
    EDIT: Level 4s always type faster than me!!!

  • HT3546 I can't figure out how to install bonjour from the CD that came with my airport express.  Can anyone help?

    I can't figure out how to install bonjour from the CD that came with my airport.  Can anyone help?

    If you are having difficulties installing Bonjour from the Installation CD, you can download the latest version of Bonjour from here.

  • How to install data from an external sd card onto my tablet (a5500-f)

    how to install data from an external sd card onto mt tablet (A5500-F).

    Choose Computer from the Finder's Go menu, double-click the drive, and drag your documents back.
    (111169)

  • How to install software from imac to macbook pro

    how to install software from imac to macbook pro

    Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

  • How to install software from disk onto imac

    how to install software from disk onto imac

    Are you using one of the newer iMac's with no DVD drive? If so, you can either get an external CD/DVD drive (any make - doesn't have to be Apple) or, if you have another Mac on the same network that has a CD/DVD drive you may be able to do it by turning on 'DVD or CD Sharing' on that Mac (System Preferences>Sharing). Hopefully you'll see the disk on the Mac without the DVD drive and be able to install from there.

  • How do install  program from external drive to mac book air

    how do install  program from external drive to mac book air

    DVD or CD sharing: Using Remote Disc - Apple Support

  • Installing Leopard from which account?

    I am curious whether some people have been installing Leopard from a second or non-adminstrator account.
    If you open a terminal window and enter "id" without the parenthesis, if you are the main or original user, I am pretty sure you should see 501 as your uid.
    Apple starts uids from 501 and up.
    My uids are 501 and 502, for my less-than-full-privileged account.
    I suspect that the install should be done from the main, root, account, the one with full admin privs.
    For those who are having issues with ownership, check your uid as mentioned above.
    I would also check the uid before creating a backup and/or installing Leopard - it might be something of importance.

    I believe the only reason the little "Install Mac OS X" application you double-click on to begin the install process asks for an admin password is for the authorization to set the startup disk to the DVD, which is a requirement imposed by the Startup Disk system preference of the OS it is running under. If you just start up from the DVD directly (using the "C" key or option key methods), you are not asked to authenticate.
    The install itself runs as root & I don't believe any user accounts are created until the setup assistant runs on the first reboot. If you migrate user info from an existing Mac or a connected drive, those UID's & GID's are preserved, otherwise the first account created is an admin user with UID of 501, as it is for any "virgin" install.
    Note also that as long as you have at least one admin account (which can have a UID greater than 501), you can change your 501 user's account type to standard. The password thing seems to have a few causes, all associated with previous accounts created in early versions of the OS like 10.1 or 10.2.

  • Installing Leopard from USB flash drive

    Basically i need to install Leopard from a USB flash drive on my Macbook, but i will sum up my issue: (I'm afraid i'm not a computer-"geek", so bear with me when i try to explain the issue :-))
    My macbook hdd recently died on me, so put in a new, clean hdd. I now need to install Leopard on the new hdd from a DMG-file.
    So, i have an 8GB USB flash drive and DMG-file of Leopard.
    I formatted the USB flash drive to NTFS, and copied the 6+GB DMG-file onto the flash drive.
    I tried booting from the flash drive by holding down the option key, but a blank screen shows up with a mouse pointer. There is no Flash drive or install icon to select.
    Can anyone tell me, what i'm doing wrong?

    Hi Dweepe;
    On top of everything else the other posters pointed out, I would suggest that formatting the USB flash drive to NTFS is not doing you any favors either. NTFS is a propriety file system from Microsoft which the Mac can only read with special software install.
    My suggestion is to replace your optical drive. A new one can probably be purchased for much less then the problems you are creating for yourself in your attempts to work around replacing it.
    Allan

  • Can you install leopard from an external usb disc drive?

    I don't know if the disc drive is fast enough for leopard or something. It's taking forever to open the installer, and when I restarted into the installer it just booted back to my desktop. I have an external disc drive I want to try. Can you install leopard from and external disc drive?

    ****, I just tried it and when I restarted it didn't go into the installer. I think my disc drive in my old mac mini might be too slow. It takes forever to recognize the disc and just to double click on it and it up. And when I tried to install it the first time from the internal drive it just booted right into my desktop again.

  • How to reinstall Leopard from another source than the install disk?

    Hi there. Great forum full of information but I somehow could not find the answer to my problem.
    I own a MacBook Pro and for some reason, the Optical drive refuses to read DVD and CD. It still accepts blank CD and does write....strange.
    I can live with that, but what will I do if and when my Mac needs access to the install disk that came with it?
    Today I partitioned an external Lacie HD with the intention of installing OS Leopard on it. I thought this would be an ideal solution as a back up strategy. Files in one volume, OS in another.
    I have copied the content of both install disks on my desk top through firewire using my good lady's macbook (tiger) but when I click on the install icon, I get a negative message.
    [IMG]http://img99.imageshack.us/img99/5370/picture1tk.png[/IMG]
    [IMG]http://img21.imageshack.us/img21/7129/picture2gn.png[/IMG]
    What is the way of doing this?
    Also, is it possible to reformat an reinstall the OS through firewire using the other macBook optical drive?
    Thanks

    You must be sure the drive is partitioned GUID or it will not boot a computer from the cloned installer disc.
    You may want to consider getting a flash drive. An 8 GB flash drive will hold the OS X installer and a 16 GB one will hold the installer and Disc 2 (need to partition the flash drive.) Take care what brand you buy. Some don't work too well for booting Macs. I've had good success with PNYs. Prep them as follows:
    Extended Hard Drive Preparation
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    The above works, also, for external hard drives.

Maybe you are looking for