How do install the sound drivers after they appear to have been deleted

H/P Compaq PRESARIO SR2019UK
OS XP SERVISE PACK 3.
Sound lost on recent service

Hi:
You can get the audio driver you need at the link below.
Accept the agreement. Download and install the 7th item listed (first one in green).
http://218.210.127.131/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownType...
Paul

Similar Messages

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Can anyone help me- I recently had an archive operating reinstall completed at the genius bar (so they didn't have to delete my hard drive), but now my battery says "not charging." It used to hold a 2.5 hour charge, and now nothing. Can anyone help?

Hi, Michelle. Welcome to Apple Support Communities.
Have you tried resetting the SMC? The SMC (System Management Controller) has control over the charging function, so resetting it may help.

I have updated my ipad to version 7.1 but in the process all my bookmarks and favourites have been deleted

I have updated my ipad to version 7.1 but in the process all my bookmarks and favourites have been deleted.
I tried switching off and turning back on again but they are still missing, please can someone help?

Go to Settings>WiFi>Network Name - tap the blue arrow next to the name and then tap Forget this Network in the next window. Restart your iPad.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Then go to Settings>WiFi - find your network again - enter the password and see if you can get online.
Or reboot your router - unplug it for 30 seconds and then plug it in again.
Or go to Settings>General>Reset>Reset Network Settings. You will have to find the network and enter the password again.

Using bootcamp 5.1, Windows 7 home is installed but missed installing the drivers disk. How to install the Mac drivers for windows after the fact.

While using Bootcamp 5.1, and OS X 10.8.2, I partitioned my Mac disk with 80 Gigs for Windows 7 home and the install went great, but I must have missed the time when I was to install the Mac drivers disk to install the drivers for Windows,(when in Windows I don't have a mouse or optical drive.) Is there a way to install the drivers after Windows is installed, or do I have to go through the whole process all over again?

Press X key after the startup sound to boot into OS X. Then, open Boot Camp Assistant, download Boot Camp drivers and burn them into a USB drive or DVD. Finally, boot in Windows and install drivers

Guys ... I have a 2008 MacPro running the current Yosemite. I also have installed the sound amp called "BOOM!" I have the Sound set to Line Out which should have the computer boot up to BOOM! Instead, it boots up to the Internal speaker. What's up?

Hi Folks ...
I have a 2008 MacPro running the current Yosemite. I have installed the recommended upgraded video card, but the sound is as it was new. I also have installed the sound amp/graphic equalizer called "BOOM!" I have the Sound set to Line Out which should have the computer boot up automatically to BOOM! and thus to the external speakers. Instead, it boots up to the Internal speaker. According to the folks at "BOOM!", this is happening to others who have similar Macs. They can't find any explanation within BOOM!, so I am turning to you all. Any ideas?

Hi Kappy ...
Sorry, I guess I didn't state the problem very well.
I don't want the computer to boot up to the internal speaker. I want it to boot up to the external speakers. However, even though System Preferences is set on Line Out, when the computer boots up or reboots, it erroneously goes to internal speaker. So, every time I boot up, I have been going to System Preference/Sound and clicking on Line Out. From that point on, everything is OK until the next boot up. It is a small annoyance, but annoying all the less. The simple explanation seems to be that when the computer is shut down, it does not hold the setting for Line Out and resets itself to Internal Speaker. How do I change that behavior and get it to go to Line Out whenever it boots up?

Do you know what happened to the Notes i made on ipad 'Notes'? They seem to have been deleted. How do I get them back??

Do you know what happened to some Notes i made on ipad 'Notes'? I turned on the ipad and they have been deleted. I am not connected to the cloud? How do I get them back??

What exactly did your friend do ? Did you or he take a backup of your iTunes library before updating your computer ? Have you checked to see if your music is still on your computer ? By default your iTunes library is stored under :
Windows XP: \Documents and Settings\username\My Documents\My Music\
Windows Vista: \Users\username\Music\iTunes
Windows 7 and Windows 8: \Users\username\My Music\iTunes
If it's there then you can add it to your iTunes library via File > Add To Library.
If not then do you have a copy of your library on a backup ? If you do then use File > Add To Library to add it back.
If you haven't got a backup then you might, depending upon what country that you are in and if the music is still in your country's store, be able to redownload your iTunes purchases via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage.

How to not allow someone to load text messages that have been deleted from the phone however apps are still able to reteive them

Someone is trying to access the text messages that have been deleted off of my phone thru an app (unknown app)
I do have somethings that I want to remain private in my phone and I either need help to delete them for good. Or block them

Let me rephrase that. They can't unless they had physical possession of your phone and installed spyware on it.

How to add the sound drivers on your dual booted windows partition

As of today I succesfully added a windows partition to my MacBook (with the help of a friend) unfortunately I encountered a problem.
I have no sound.
My friend said that I needed to add sound drivers in. But he didn't know how to do that.
If anyone can give me some help here I'd appreciate it A LOT
Jake.

Welcome to Apple Support Communities.
OS X 10.6 'Snow Leopard' uses Boot Camp Assistant 3.
Windows drivers are located on the Snow Leopard installation disc, and installed after installing Windows.
Full installation instructions for Windows, including how to load the drivers are found here:
http://manuals.info.apple.com/en/boot_camp_install-setup_10.6.pdf
OS X 10.7 'Lion' and Boot Camp Assistant 4.0. Full installation instructions are found here:
http://manuals.info.apple.com/en/boot_camp_install-setup_10.7.pdf

I have just been clearing one of my computers ready to sell. I disconnected it from the cloud, and immediately all my files on the cloud appear to have been deleted so that my other computers appear to have lost them too! Any ideas!

I have just been cleaning a iMac preparatory to sale and disconnected it from me.com then started deteting files. It seems to have deleted everything from the cloud too, so now my other computers cant see the files. Any ideas what I have done and more importantly what I can do to correct things?

The music sync is one way - computer to ipod. The only exception is ituens purchases. The ipod is not a backup device.
Copy everything from the old computer or your backup copy of your old computer, to the new one.

How do you install the JMicron drivers for IDE compatibility on a p965 Platinum?

I can plainly see I've got the same issue as many others with regard to using my IDE devices on the p965 board. In short, I can't. I have to install the JMicron drivers.
I know this has been covered elsewhere, but frankly I can't find it and I want it to be in a highly visible place, perhaps a permanent thread. Would someone please supply the link(s) relevent to doing this for those of us who cannot yet boot to an OS because ALL of our mass media and optical devices are on the IDE chain that needs the drivers?
Thanks in advance!

Quote from: GettinThere on 06-December-06, 08:44:41
I can plainly see I've got the same issue as many others with regard to using my IDE devices on the p965 board. In short, I can't. I have to install the JMicron drivers.
I know this has been covered elsewhere, but frankly I can't find it and I want it to be in a highly visible place, perhaps a permanent thread. Would someone please supply the link(s) relevent to doing this for those of us who cannot yet boot to an OS because ALL of our mass media and optical devices are on the IDE chain that needs the drivers?
Thanks in advance!
never see any solution that work all time for this problem.
for some of us: driver install:
http://www.station-drivers.com/page/jmicron.htm
for some other: flash bios with bios 1.2
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=745&kind=1
the better one: buy sata device and diseable this Jmicron in bios

How to close the Sound object

I'm using Flash CS3, running code in ActionScript 3.
I use the Loader class to load a child SWF file, which then
takes over the entire area on my website that is reserved for
Flash. If the user decides to stop watching the SWF file before it
is completed, he hits the "close" button within the child SWF,
ultimately causing the Loader.unload() method to be executed. So
far, so good, only the sound from the remaining portion of the SWF
file keeps playing. According to the Flash Docs for the
Loader.unload() method:
"As a best practice, before you unload a child SWF file, you
should explicitly close any streams in the child SWF file's
objects, such as LocalConnection, NetConnection, NetStream, and
Sound objects. Otherwise, audio in the child SWF file might
continue to play, even though the child SWF file was unloaded."
It then gives an example that assumes you already have access
to the Sound object, so closing the Sound object is done by:
mySound.close();
The only problem is that I have no idea how to access the
Sound object when I use the Loader.load() method. Where is this
beast? I can't seem to find anything in the documentation that
tells me how to find the Sound object after calling Loader.load().
As a temporary fix, I modified the target SWF file so that when the
"close" button is hit, it calls the "stop()" function; however,
this only stops the sound, it does not close the associated Sound
object, and I presume it continues to lurk around in memory with
nothing useful to do. (When the user hits the "close" button in the
child SWF file, it creates a "bubbling" event so that the Loader
class can call the Loader.unload() method on it.)
I've attached code for your reference.
Any help is deeply appreciated!
-Dan

Ack! Looks like I hijacked this thread, sorry.
I'm doing almost exactly the same thing the OP is doing...
Loader class to load an external SWF (which is a video file FLV).
If the user hits the "close" button on the video, the video goes
away as it should but the audio continues.
I understand that I need to close any NetConnection and
NetStream objects in addition to unloading the movie. What I don't
understand is how to do that. I'm sure that it's a syntax thing I'm
just not getting right. I would just really like a more detailed
explanation of stopping NetConnections and NetStreams (but an
explanation for the not-so-actionscript-experienced LOL).
Thanks.

Any easy way to remove floating ads after they appear (i.e., not preventing them)?

Generally ads on web pages don't bother me. So I don't feel strongly to use ad-blocking software to prevent any or all kinds of ads. But I do mind ads that float on web pages because they often block the view.
Although some floating ads allow the user to close them, more pop-ups, or other types of nuisance, may appear after they are closed.
So, Is there any easy way (an add-on, perhaps) to remove the floating ads after they appear, and prevent them from generating more ads or showing themselves again when the page is reloaded?
Maybe something like "CTRL + Alt + left click" applied on the floating ads?
I don't want to disable scripts and Flash.

There are add-ons that do this, but they haven't been updated in a long time, so they might have problems.
* https://addons.mozilla.org/firefox/addon/zaqwes_remover/
* https://addons.mozilla.org/firefox/addon/remove-it-permanently/
* https://addons.mozilla.org/firefox/addon/clean-the-junk/
* https://addons.mozilla.org/firefox/addon/nuke-anything-enhanced/
I'd sooner recommend Adblock Plus, used as follows:
# Install Adblock Plus.
#* https://addons.mozilla.org/firefox/addon/adblock-plus/
# Click the Adblock Plus toolbar icon and choose Filter Preferences.
# On the Filter Subscriptions tab, right-click each subscription and choose Delete. Now Adblock Plus isn't blocking anything.
# Install Element Hiding Helper for Adblock Plus.
#* https://addons.mozilla.org/firefox/addon/elemhidehelper/
# Now when you want to hide something on a web page, click the Adblock Plus toolbar icon and choose "Select an element to hide".
# If the web page preview looks acceptable, click the Add Element Hiding Rule button. For advanced usage, see the following pages.
#* https://adblockplus.org/en/filters#elemhide
#* https://developer.mozilla.org/docs/Web/CSS/Reference#Selectors

No sound after installing the latest drivers

After installing the latest drivers for X-fi xtrememusic, 2.8.003 I have no sound. Also my creative console is stuck in Entertainment Mode, it won't switch to any other mode. Help please?

Pheary wrote:
?My best guess is this is some bizarre driver/registry problem, since it mostly works perfect in XP, but barely at all in Vista.
Well, i don't have a solution for you, but if your soundcard + hub act like that even under xp after a few weeks i would suggest to get a replacement, cause there might be a hardware-error that causes your problem. A software/driver problem sounds very unlikely to me. That your having problems under Vista, isn't strange at all, cause there are still no final drivers relaesed for Vista and the support of the hub is rather barebone at the moment. Stormblade

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

HT2518 I just left the Apple store after they checked and wiped my machine. When I plug the external hard drive in to restore my files, there is no prompts on how to migrate the files. I can see the backup from yesterday. How do I get the migration accomp

I just left the apple store after they checked the MAC and wiped it clean. I have plugged the external drive in and see the device; however, they was no prompt to migrate the files, as I was told. How do I get the files to migrate. I can see yesterdays back-up. I thought it was to automatically prompt for the migration process?

Applications -> Utilities -> Migration Assistant

How do install the sound drivers after they appear to have been deleted

Similar Messages

Maybe you are looking for