How do iPhoto and iTunes work with each other

I am very confused about how iPhoto (which is located in the file structure on my Macair under pictures) interacts with iTunes and Photos on my iPad. The management (including synching and moving photos) is not very intuitive. Anyone care to shoot me a link on where to find a good explanation or try their hand at explain this? Thanks.

Instructions here > iTunes: How to share music between different accounts on a single computer
And here > iPhoto: Sharing libraries among multiple users

Similar Messages

For WRT1900AC, how do the 4 antennae work with each other?

I am curious how the 4 antennae work with each other. Does a wifi client need to communicate with all 4 antennae? Or just 1 (or 2)? I am curious, as I would like to move 1 or 2 of the antennae via proper cable to expand the coverage area.

bigdave240 wrote:
spec on that cable is 10.8dB per 100 feet. I would think that the router would still have a problem with that. Not sure how long the OP was going to make it but with the beaming technology i would think it would throw it off balance.
My maximum is 60ft when using LMR400 for standard wireless applications. I have done that many many times.
These days they typically integrate the higher gain antenna right into the bridge housing or mount the outdoor bridge right next to the antenna.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Flickr: Is there a reference on how IPhoto and Flickr work w/ each other?

I have a pro Flickr account that I want to use as a backup for IPhoto (a basic auto-sync). Do I have to share my events to Flickr? Is there a way to automate this? I am at around 65GB of photos, so I want to get this right the first time...
Thanks!

Don't use the iPhoto uploader. This is a syncing relationship, so if the photos are deleted from iPhoto the next time you link to Flickr they'll be deleted there too.
Check out Flickr Export: http://connectedflow.com/flickrexport/
Regards
TD

All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

All songs in my iTunes library are listed twice. I have two copies of my library in two different locations. How do I make iTunes work with one copy of my library?

That is the way the iphone works.
You need to copy everything from your backup copy of your computer.

How do iPhoto and iTunes libraries connect to iMovie?

I'm still having trouble with iMovie '08 being unable to "see" or show still photos or sounds from the iPhoto and iTune libraries. It does not seem to even know those libraries exist.
Can someone at least tell me how iMovie normally connects to those libraries? What file tells it where to look?

In iMovie 11, there is a Preferences file called com.Apple.iApps.plist. If you move this preferences file to the trash, it will reset the links to iTunes and iPhoto. I haven't had iMovie 08 for several years, but I assume there is a similar preferences file for iMovie 08.
In general, the steps would be...
Close iMovie, iPhoto, and iTunes.
In the Finder, find this file and move it to the trash. Empty the Trash.
Restart iTunes. Restart iPhoto.
Restart iMovie.
It should be in the Home/Library/Preferences folder. (Macintosh HD/<Your user name>/Library/Preferences/)

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

How can I have threads communicate with each other?

I'm working on a project that requires a group of classes communicating with each other. I decided on using a server and carrying out communication that way. However, my app only has communication between the client and server. I need the clients to be able to communicate with each other. Does anyone know how I can do this or point me to a good tutorial?

Sorry, here's a bone stock example of my server and client:
<SERVER>
package testserver;
import java.io.*;
import java.net.*;
import java.util.*;
public class TestServer
static int portOpen;
public static void main(String[] args)
portOpen=4000;
try
ServerSocket portListener = new ServerSocket(portOpen);
TestServer userThreads = new TestServer();
while (1==1)
Socket userConnection=portListener.accept();
userThreads.new PortConnection(userConnection);
catch (Exception e)
System.out.println("The server encountered a serious error. Server shut down.");
e.printStackTrace();
System.exit(0);
class PortConnection extends Thread
//Declare variables to handle connections.
Socket ourConnection;
BufferedReader serverInput;
PrintWriter serverOutput;
PortConnection(Socket userConnection)
try
ourConnection=userConnection;
serverInput=new BufferedReader(new InputStreamReader(userConnection.getInputStream()));
serverOutput=new PrintWriter(userConnection.getOutputStream(),true);
start();
catch (Exception e)
System.out.println("An error occurred when a user attempted a connection.");
public void run()
serverOutput.println("Welcome to the Server.");
try
serverOutput.close();
serverInput.close();
ourConnection.close();
catch (Exception e)
</SERVER>
<CLIENT>
package testclient;
import java.io.*;
import java.util.*;
import java.net.*;
public class TestClient {
static BufferedReader userInput;
static Socket quizServer;
static BufferedReader serverInput;
static PrintWriter serverOutput;
static String serverData;
public static void main(String[] args) {
userInput = new BufferedReader(new InputStreamReader(System.in));
try {
quizServer=new Socket("localhost",4000);
catch (Exception e) {}
try
serverInput=new BufferedReader(new InputStreamReader(quizServer.getInputStream()));
serverOutput=new PrintWriter(quizServer.getOutputStream(),true);
catch (Exception e) {}
try {
serverData=serverInput.readLine();
catch (Exception e) {}
System.out.println(serverData);
</CLIENT>

Confusion about how object interact and are aware of each other

I have this java applet
Two of the classes it contains are the main class with the init method and a UI class that is code for the interface.
the main class instantiates the UI class anonymously (i think you call it that) i.e it does not put it into a named reference it just creates it by calling new without assigning it to anything.
When I click on a button from the UI class I want to call a method in the main class...but how so?
At first I tried to make the function i want to call in the main class static so I could easily call it from the UI class...but then it began to get complex...so i just sent a reference of the main class to the UI class via its constructer.
Now i want the main class to update a JTable in the UI class, but how? It does not have any reference to the UI class.
What is really the standard method of operation for this sort of thing when objects have to be calling methods of each other. How do I make them aware of each other.

the best way to do it is like this:
public class Main {
//this is the main class
private static class MyUIFrame extends JFrame {
    //create the class. It is useable within Main this way
    //static means it doesn't implicitly 'know' about the Main class. You can also
    //remove this and call Main.this to use Main's methods
}Edited by: tjacobs01 on Apr 11, 2009 2:28 AM

IPod as a conduit to sync iCal and Outlook 2003 with each other?

I am able to synchronize my work Outlook 2003 calendar and home Mac iCal with the iPod in two separate files on the iPod. I can see them both if I select "All". My questions are:
1. What should I do to sync the PC and the Mac with the same file on the iPod?
2. Is it possible to snychronize the iCal and Outlook with each other via the iPod?
Thanks,
Iris
Powerbook G4 Mac OS X (10.4.5) PC/XP Pro

If you mount your iPod on your Mac, navgate to the iPod Calendars folder and double-click on an ics file it will import the calendar into iCal. So you can sync from the PC to the iPod to iCal uni-directionally. If Outlook 2003 can import an ics file then you should be able to sync the other way as well. However, in both cases you will essentially be copying over one calendar with another, not really synchronizing.

IPod, iTunes won't work with each other

I have spent the last 2 days trying to update my "new" nano. The first few times I synced it up no problem. Now that I've spent a small fortune on new music, the nano and iTunes won't work together at all.
First, I have the most up-to-date version of iTunes. Next, I had the software update 1.1.3 for the nano all ready to go when I plugged it in. I hit the install new software button and dear god, if the nano didn't crap out and iTunes lost it and gave me a 1436 error. I had to disconnect the nano and reconnect. I tried several times, but finally gave up on updating the software.
I went on to try to sync the nano and iTunes so I could at least listen to my music at work, but iTunes now says I'm not authorized to play ANY of my purchased music (recently purchased or stuff I've had on there for years) on my computer so it won't copy it onto my nano. So I deauthorize and reauthorize my computer several times, I've read every possible troubleshooting/solution guide I can find on the site and NOTHING works. I can play all my purchased music in iTunes once I've reauthorized my computer, but as soon as I plug my nano in - forget about it - "You are not authorized to play this music on this computer" crap. And I can't even restore the nano b/c I get that stupid 1436 error - and believe me I tried everything those help pages suggest.
I'm at a loss here and not in the least bit happy with this thing.

Problem solved. The harddisk was formatted and Windows and iTunes re-installed. Hopefully this problem won't appear very soon.

T23 and 512 MB - DIMM - modules don't work with each other, getting only beeps

Hi there,
I searched the whole web, but nowhere getting the answer.
I'm having an Thinkpad T23 2647 with XP.
Actually it works without problems with 2 kind of 256 MB modules.
When I try to change it to one ore more 512MB modules, it comes the known beep-signal for dimm-failure (there is no combination possible, even standalone doesn't work).
I've the newest BIOS (1.20) and Embedded Controller (1.06a) installed.
The dimm-modules are 512 MB SDR PC133 with 144 pins bought via Ebay from CSL Computers in germany.
I had the same problems a year before, but there I thougt it was the DIMM defect.
I need further help please.
Thanks and best wishes

It is possible that the T23 motherboard has a problem with some bad solder connections of the memory module sockets. I have personally have had at least two T23 systems with this problem (out of about 60 that have been in my hands - all purchased quite used from eBay). Your options are to change out the motherboard or to attempt to re-solder the sockets; not that easy to do but it can be possible with a steady eye and good hands (or is that the other way around ).
As a double-check, could you please list the TYPE number from the "System-unit serial number" in the main BIOS setup screen? It's only seven characters long and will start with 2647 or 2648. Don't list anything past the seventh character as that's the system's serial number and that's not needed here. I know that you've listed the 1.20 BIOS, which appears to be the latest for the T23, but I want to make sure that somebody hasn't put a T23 keyboard onto a T22 (or earlier) system. That would be one explanation as to why a 512MB module does not work and what fmyhr may have been thinking about earlier (systems older than the T23 will not work with "high density" modules).
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

JTAPI and AXL interfering with each other

This has been driving me crazy today.
I had to write a custom callforward app, which upon setting the call forward, modifies some line properties as well (remove any pickup group that may be present).
To set the callforward, I've been using JTAPI and I've had this operation operational for over a year in a productive environment. Now I've added the updateLine axl command, and all of a sudden, the application no longer does what it's supposed to.
Here is what happens: via the phone interface, I enter the number I want to forward to, then send the request to my webserver. There, the forward is set via JTAPI without exceptions being thrown (since setting / removing a cfwd gets no feedback, getting an exception = it didn't work). Then, I send the updateLine for the lines I've just forwarded. It all works out nicely, the apps comes back telling the user all his calls have been forwarded to number X.
However, no callforwarding is actually made even though JTAPI came through telling me everything was okay. However, the pickup group does get removed from the line.
If you then try the same operation again, this time there's only the JTAPI part as the line no longer is in the pickup group, and now the operation works like as reliable as it has always done before.
Writing a sample app is going to be a bitch because this thing isn't quite so simple (and I'm re-using a lot of class libs of other projects so I can't just send the source code of everything to cisco) so I might not open a case on this but I thought I'd let you know.. and if Cisco employees visit this forum maybe they could spare some time trying to replicate.
Now I'm stick having to rewrite the whole callforwarding via axl which technically isn't a problem, but it's just going to take up time that wasn't forseen in this particular project :(

In order to modify a package, the developer would need to acquire a lock on the package. So Oracle would prevent two developers from modifying a package simultaneously. It would do nothing, though, to prevent two developers from serially overwriting each other's changes. That's one of the many reasons that you use an external source control system when developing any code, including database packages.
Justin

Time Capsule and iTunes working with external HDD

Hello all.
I have a situation I would to share with you and see if there is a solution.
I have a PC and a Macbook Air. I had a Time Capsule which had my iTunes library but the drive failed and I lost everything. However when it was running things weren't going great. Because the Time Capsule was a bit clever, it only spun the HDD when TIme Machine was backing my MBA.
This meant that I had trouble accessing my iTunes library because it wasn't always available. So I would have to locate the library on most occasions and on even more occasions iTunes lost the links with my media files and had to go through the time consuming 'Find files' process.
I was wondering if an answer to my problem would be to store all my music and other media on an external HDD (like the GoFlex). The I could plug it into my PC, then my MBA and if I wanted to make it avable to both I could plug it into Time Capsule and it would 'broadcast' it to both.
I was wondering if anyone had tried this and how it worked, Would iTunes see the HDD plugged directly into the MBA as the same as the HDD being plugged into the Time Capsule?
I look forward to hearing your suggestions.

Scipio7 wrote:
it shows 3GB out of 3GB instead of 3GB out of 40Gb total.
Where are you seeing those values?

Lightroom and Photoshop don't want to work with each other ...

Hello,
I've a problem with Lightroom 2.4 and Photoshop Cs4 (11.0.1).
When I let Lightroom open a photo in Photoshop to edit it (photo>edit in>Photoshop cs4) it opens it into Photoshop, and I can do wathever I want to the photo. But here's the problem: when I'm ready and click Save, the new Psd-file doesn't comes back into Lightroom... However, Photoshop did save the new Psd-file in the right location with the right file-name, so I have to synchronise the folder and import it back into the catalog. I have Jpegs and DNGs in my catalog, but they both have the problem. The funy part about this is that this happens to almost every photo, so not every photo. I have seen a few photos (about 5 out of 10.000) that do come back in the catalog automatically. I have made a little second catalog to test if it's a problem with the catalog, but the second catalog has the same problem. I already reïnstalled Photoshop, but it didn't help. My operating system is Mac Os X 10.5.8. Camera is 5.4...
Can anyone help me, because it's a real pain in the back to edit my photos in Photoshop right now....
Thanks,
Vincent

Deleting Prefs in both LR and PS sometimes cleans this up.
How to locate Preferences files in LR

Do iPhoto and iMovie work with ios 5.1.1? (iPad 3rd gen)

I don't want to upgrade but I want these apps!

No. Both apps require iOS 6 or later according to their info in the App Store.

How do iPhoto and iTunes work with each other

Similar Messages

Maybe you are looking for