How do it know which backup files to keep and which to delete?

How do you know which backup files to keep and which to delete?

If you still have all devices, just delete all. They will re backup.

Similar Messages

  • I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

    I recently deleted many duplicate files. In the midst of it my Itunes songs are not in Itunes. They are in two different folders. One under 'Music' in my ID. And two under a MyMusic file in Documents. How do I know which one to import?

    Thanks, this is not an ideal answer but probably the most sensible one in my case.
    I will try it unless someone has a better suggestion, but I'll wait a bit as it will take me a few days anyway (I had actually tried to create a new smaller playlist or download by album, but at this stage the music app is not letting me queue a list of songs for download - I think I will have to disable and re-enable iTunes match which will probably delete all the songs).
    I have to say I am not very impressed with Apple here - having an online backup of all your data and beeing able to restore it to a new device easily was a strong selling point of iCloud. For music, they are Definitly not delivering at the stage.

  • Why doesn't iTunes copy all my files, and how do I know which it left out?

    Hello,
    I had iTunes on my old PC, and when I installed it on my new one (Vista Home Premium), it very helpfully deleted everything off my iPod and copied it all back again! As it happens, the only files on the iPod were from the iTunes library, so it didn't matter, but it was annoying.
    Anyway, now it has (supposedly) synched my library and iPod, if I look at the library, it shows 1164 songs. If I look at my iPod, it only shows 1157 songs.
    How do I know which songs iTunes didn't copy over? More to the point, anyone any idea why it didn't just copy all of them?
    Thanks for any help.

    OK, thanks for all the replies.
    hmacross: I have checked for duplicates, and there were some there. This was because when I installed iTunes, it insisted on scanning my entire hard disk and adding every audio file it could find, even though I didn't want it to. I only wanted it to add ones in my Music folder. I had to do a fair amount of work to clean this up! Anyway, I just checked again, and there aren't any duplicates in my iTunes library.
    Chris: If I look in my iTunes library, and show all the audio files as a big list, at the bottom it gives me the total number of files, and the total play length. If I look at the iPod, I see similar numbers.
    After some tidying up, the iTunes library shows 1149 songs, and the iPod shows 1147 songs, so there's still a discrepancy. I have double checked for duplicates, so that's not the issue.
    Thanks again. Any further help would be appreciated.

  • How can I know which file is using by the self-service workflow?

    Dear all:
    In my directory, there are two HRSSA.wft and How can I know which source is using by the workflow of the self-service ?
    my environment is oracle 11.5.9 | self-service 4.1 | workflow builder 2.6
    Thanks
    regards
    Terry

    One way would be to download the HRSSA workflow to a wft file (using the WFLOAD utility - see MOS Doc 578248.1), then comparing this downloaded wft file with the two files you have (using a utility such as diff in Unix). The comparison that reports no differences will identify the wft that was uploaded into the database.
    HTH
    Srini

  • How can you restore your backup files from time machine?

    Hi how can you restore your backup files on your mac book pro from time machine? i lost all my pic and files on my phone and then restored it from the last back up which was when i lost all my files i dont know what i did? someone please help!
    Thank You
    Jon

    YOu might get more info if you post in the MAC forum.

  • HT1451 If I have two iTunes libraries on one computer, how do I know which one is opening when I click on the iTunes icon on the desktop?

    If I have two or more iTunes Libraries on one computer, how do I know which one is opening when I click on the iTunes icon on my desktop?

    You cannot.
    When you sync to a new library, it will erase the current content.
    Use your backup copy of the old computer to copy everything to the new one.

  • HT1766 I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    I have an iphone 4.I upgraded it to 5.0.1 and so I have lost all the data from my iPhone,but i have a backup in my computer.How do I use the backup file ? i.e How will i get that backup file in my iPhone ?

    Connect phone to computer.
    Select Restore.
    Tell iTunes which of the available backup files to use, let iTunes restore it.
    Also, try reading the User's Guide as it answers questions like this.

  • How can I know which link was clicked in the link list

    Hi everyone
    I'm using list of links in my page to display list of the files in some directory.
    How can I know which link user was clicked. There are some code:
    <%
    String dir = "..//files//";
    File fin = new File(dir);
    File files[]=fin.listFiles();
    for(int i=0;i<files.length;i++)
    File x = files;
    %>
    <%=x.getName()%><br>
    <%
    %>
    Please help

    You need to pass some data on the querystring to the page you are linking to.
    <a href="Main_Work.jsp?file=<%=x.getName()%>"><%=x.getName()%></a><br>
    This will send a parameter called "file" with the value of the file name that the user clicked.
    Now in Main_Work.jsp you can access this data as follows:
    <%
    String s = request.getParameter("file");
    File f = new File("..//files//"+s);
    %>

  • How can I know which photos are in the library was used in each album I have created before.

    How can I know which photos are in the library was used in each album I have created before?
    I have many photos in the library folder of iPhoto, but actually I don't know which photos were used in my album.
    Is there any method to find this?
    Thanks.

    Album or Book?
    If Album you can find the ones not already used:
    File -> New Smart Album
    Album -> is not -> Any
    Regards
    TD

  • How should I know which JAVA

    Hello
    How should I know which JAVA I have installed on: when Issue-ing command "java -version".
    I get response like :
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142-20080923 (JIT enabled)
    J9VM - 20080922_23329_LHdSMr
    JIT  - 20080815_1845_r8
    GC   - 200809_04)
    I know it comes from files like  "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm" or " IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm"
    But how to find out. It is an productive system so I can not "try"
    Thank you in advance

    Hello
    In any case java is instaled to /opt/IBMJava2-amd64-142 (this is an unix machine). This is also JAVA_HOME and SAPINST.... variable
    This is when I install from  "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm" or from "IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm". When I enter java -version I get (as stated before):
    java version "1.4.2"
    Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
    IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 Linux amd64-64 j9vmxa64142ifx-20090909 (JIT enabled)
    J9VM - 20090908_41946_LHdSMr
    JIT  - 20090210_1447ifx1_r8
    GC   - 200902_24)
    How could I know it comes from "IBMJava2-AMD64-142-SDK-1.4.2-13.2.x86_64.rpm"(version 13 i.e latest) or "IBMJava2-AMD64-142-SDK-1.4.2-12.0.x86_64.rpm"
    Kindly please for help

  • How do you know which fields are mandatory while uploading PO using BAPI.

    How do you know which fields are mandatory while uploading PO data using BAPI. in a structure how do you know which fields are mandatory.
    and also, where how do you check that, the BAPI function module is executed.
    Thanks in Advance.
    Naveen.

    hi
    hope it will help you.
    Reward if help.
    REPORT zpo_bapi_purchord_tej.
    DATA DECLARATIONS *
    TYPE-POOLS slis.
    TYPES: BEGIN OF ty_table,
    v_legacy(8),
    vendor TYPE bapimepoheader-vendor,
    purch_org TYPE bapimepoheader-purch_org,
    pur_group TYPE bapimepoheader-pur_group,
    material TYPE bapimepoitem-material,
    quantity(13),
    delivery_date TYPE bapimeposchedule-delivery_date,
    net_price(23),
    plant TYPE bapimepoitem-plant,
    END OF ty_table.
    TYPES: BEGIN OF ty_alv,
    v_legs(8),
    success(10),
    v_legf(8),
    END OF ty_alv.
    TYPES: BEGIN OF ty_alv1,
    v_legf1(8),
    v_msg(500),
    END OF ty_alv1.
    *-----Work area declarations.
    DATA: x_table TYPE ty_table,
    x_header TYPE bapimepoheader,
    x_headerx TYPE bapimepoheaderx,
    x_item TYPE bapimepoitem,
    x_itemx TYPE bapimepoitemx,
    x_sched TYPE bapimeposchedule,
    x_schedx TYPE bapimeposchedulx,
    x_commatable(255),
    x_alv TYPE ty_alv,
    x_alv1 TYPE ty_alv1,
    x_alv2 TYPE ty_alv1.
    *-----Internal table declarations.
    DATA: it_table TYPE TABLE OF ty_table,
    it_commatable LIKE TABLE OF x_commatable,
    it_item TYPE TABLE OF bapimepoitem,
    it_itemx TYPE TABLE OF bapimepoitemx,
    it_sched TYPE TABLE OF bapimeposchedule,
    it_schedx TYPE TABLE OF bapimeposchedulx,
    it_alv TYPE TABLE OF ty_alv,
    it_alv1 TYPE TABLE OF ty_alv1,
    it_alv2 TYPE TABLE OF ty_alv1.
    DATA: po_number TYPE bapimepoheader-po_number,
    x_return TYPE bapiret2,
    it_return TYPE TABLE OF bapiret2,
    v_file TYPE string,
    v_temp(8),
    v_succsount TYPE i VALUE 0,
    v_failcount TYPE i VALUE 0,
    v_total TYPE i.
    DATA: v_temp1(5) TYPE n VALUE 0.
    DATA: x_event TYPE slis_t_event,
    x_fieldcat TYPE slis_t_fieldcat_alv,
    x_list_header TYPE slis_t_listheader,
    x_event1 LIKE LINE OF x_event,
    x_layout1 TYPE slis_layout_alv,
    x_variant1 TYPE disvariant,
    x_repid2 LIKE sy-repid.
    DATA : it_fieldcat TYPE TABLE OF slis_t_fieldcat_alv.
    SELECTION-SCREEN *
    SELECTION-SCREEN BEGIN OF BLOCK v_b1 WITH FRAME.
    *-----To fetch the flat file.
    PARAMETERS: p_file TYPE rlgrap-filename.
    SELECTION-SCREEN END OF BLOCK v_b1.
    AT SELECTION-SCREEN *
    AT SELECTION-SCREEN.
    IF p_file IS INITIAL.
    MESSAGE text-001 TYPE 'E'.
    ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
    *-----To use F4 help to find file path.
    CALL FUNCTION 'F4_FILENAME'
    EXPORTING
    program_name = syst-cprog
    dynpro_number = syst-dynnr
    IMPORTING
    file_name = p_file.
    v_file = p_file.
    START-OF-SELECTION *
    START-OF-SELECTION.
    PERFORM gui_upload.
    LOOP AT it_table INTO x_table.
    PERFORM header_details.
    v_temp = x_table-v_legacy.
    LOOP AT it_table INTO x_table WHERE v_legacy = v_temp.
    PERFORM lineitem.
    PERFORM schedule.
    ENDLOOP.
    DELETE it_table WHERE v_legacy = v_temp.
    PERFORM bapicall.
    MOVE po_number TO x_alv-success.
    APPEND x_alv TO it_alv.
    CLEAR x_alv.
    *-----To clear the item details in internal table after the operation for a header.
    REFRESH: it_item,
    it_itemx,
    it_sched,
    it_schedx.
    CLEAR: v_temp1.
    ENDLOOP.
    v_total = v_succsount + v_failcount.
    PERFORM display_alv.
    FORM GUI_UPLOAD *
    FORM gui_upload .
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = v_file
    filetype = 'ASC'
    TABLES
    data_tab = it_commatable
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17
    IF sy-subrc = 0.
    *-----To fetch the comma seperated flat file into an internal table.
    LOOP AT it_commatable INTO x_commatable.
    IF x_commatable IS NOT INITIAL.
    SPLIT x_commatable AT ',' INTO
    x_table-v_legacy
    x_table-vendor
    x_table-purch_org
    x_table-pur_group
    x_table-material
    x_table-quantity
    x_table-delivery_date
    x_table-net_price
    x_table-plant.
    APPEND x_table TO it_table.
    ENDIF.
    CLEAR x_table.
    ENDLOOP.
    ENDIF.
    ENDFORM. " gui_upload
    FORM HEADER_DETAILS *
    FORM header_details .
    MOVE 'NB' TO x_header-doc_type.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = x_table-vendor
    IMPORTING
    output = x_table-vendor
    MOVE x_table-vendor TO x_header-vendor.
    MOVE x_table-purch_org TO x_header-purch_org.
    MOVE x_table-pur_group TO x_header-pur_group.
    x_headerx-doc_type = 'X'.
    x_headerx-vendor = 'X'.
    x_headerx-purch_org = 'X'.
    x_headerx-pur_group = 'X'.
    ENDFORM. " header_details
    FORM LINEITEM *
    FORM lineitem .
    v_temp1 = v_temp1 + 10.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = v_temp1
    IMPORTING
    output = v_temp1.
    MOVE v_temp1 TO x_item-po_item.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = x_table-material
    IMPORTING
    output = x_table-material.
    MOVE x_table-material TO x_item-material.
    MOVE x_table-quantity TO x_item-quantity.
    MOVE x_table-net_price TO x_item-net_price.
    MOVE x_table-plant TO x_item-plant.
    x_itemx-po_item = v_temp1.
    x_itemx-material = 'X'.
    x_itemx-quantity = 'X'.
    x_itemx-net_price = 'X'.
    x_itemx-plant = 'X'.
    APPEND x_item TO it_item.
    APPEND x_itemx TO it_itemx.
    CLEAR: x_item, x_itemx.
    ENDFORM. " lineitem1
    FORM SCHEDULE *
    FORM schedule .
    MOVE x_table-delivery_date TO x_sched-delivery_date.
    MOVE v_temp1 TO x_sched-po_item.
    x_schedx-delivery_date = 'X'.
    x_schedx-po_item = v_temp1.
    APPEND x_sched TO it_sched.
    APPEND x_schedx TO it_schedx.
    CLEAR: x_sched, x_schedx.
    ENDFORM. " schedule
    FORM BAPICALL *
    FORM bapicall .
    CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
    poheader = x_header
    poheaderx = x_headerx
    IMPORTING
    exppurchaseorder = po_number
    TABLES
    return = it_return
    poitem = it_item
    poitemx = it_itemx
    poschedule = it_sched
    poschedulex = it_schedx.
    IF po_number IS NOT INITIAL.
    v_succsount = v_succsount + 1.
    MOVE x_table-v_legacy TO x_alv-v_legs.
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    ELSE.
    v_failcount = v_failcount + 1.
    MOVE x_table-v_legacy TO x_alv-v_legf.
    MOVE x_table-v_legacy TO x_alv1-v_legf1.
    LOOP AT it_return INTO x_return.
    IF x_alv1-v_msg IS INITIAL.
    MOVE x_return-message TO x_alv1-v_msg.
    ELSE.
    CONCATENATE x_alv1-v_msg x_return-message INTO x_alv1-v_msg SEPARATED BY space.
    ENDIF.
    ENDLOOP.
    APPEND x_alv1 TO it_alv1.
    CLEAR x_alv1.
    ENDIF.
    ENDFORM. " bapicall
    FORM DISPLAY_ALV *
    FORM display_alv .
    PERFORM x_list_header.
    PERFORM build_fieldcat CHANGING x_fieldcat.
    x_repid2 = sy-repid.
    x_event1-name = 'TOP_OF_PAGE'.
    x_event1-form = 'TOP_OF_PAGE'.
    APPEND x_event1 TO x_event.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = x_repid2
    is_layout = x_layout1
    it_fieldcat = x_fieldcat
    i_callback_user_command = 'USER_COMMAND'
    i_callback_top_of_page = 'TOP_OF_PAGE'
    i_save = 'A'
    is_variant = x_variant1
    it_events = x_event
    TABLES
    t_outtab = it_alv
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " display_master_data
    FORM USER_COMMAND *
    FORM user_command USING ucomm LIKE sy-ucomm selfield
    TYPE slis_selfield.
    READ TABLE it_alv INTO x_alv INDEX selfield-tabindex.
    CLEAR : x_alv2,it_alv2[].
    LOOP AT it_alv1 INTO x_alv1 WHERE v_legf1 = x_alv-v_legf.
    x_alv2 = x_alv1.
    APPEND x_alv2 TO it_alv2 .
    ENDLOOP.
    DATA : it_fieldcat TYPE slis_t_fieldcat_alv.
    DATA : x3_fieldcat LIKE LINE OF it_fieldcat.
    CLEAR : x3_fieldcat,it_fieldcat[].
    CLEAR x3_fieldcat.
    x3_fieldcat-col_pos = '1'.
    x3_fieldcat-fieldname = 'V_LEGF1'.
    x3_fieldcat-reptext_ddic = text-111.
    x3_fieldcat-ref_tabname = 'IT_ALV2'.
    APPEND x3_fieldcat TO it_fieldcat.
    CLEAR x3_fieldcat.
    CLEAR x3_fieldcat.
    x3_fieldcat-col_pos = '1'.
    x3_fieldcat-fieldname = 'V_MSG'.
    x3_fieldcat-reptext_ddic = text-112.
    x3_fieldcat-ref_tabname = 'IT_ALV2'.
    APPEND x3_fieldcat TO it_fieldcat.
    CLEAR x3_fieldcat.
    x_layout1-colwidth_optimize = 'X'.
    x_layout1-zebra = 'X'.
    IF it_alv2[] IS NOT INITIAL.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    i_callback_program = x_repid2
    is_layout = x_layout1
    it_fieldcat = it_fieldcat
    i_save = 'A'
    i_callback_top_of_page = 'TOP'
    is_variant = x_variant1
    it_events = x_event
    TABLES
    t_outtab = it_alv2
    EXCEPTIONS
    program_error = 1
    OTHERS = 2.
    ENDIF.
    ENDFORM.
    FORM USER_COMMAND *
    FORM top.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary = 'Commentry'.
    ENDFORM.
    FORM BUILD_FIELDCAT *
    FORM build_fieldcat CHANGING et_fieldcat TYPE slis_t_fieldcat_alv.
    DATA: x1_fieldcat TYPE slis_fieldcat_alv.
    CLEAR x1_fieldcat.
    x1_fieldcat-col_pos = '1'.
    x1_fieldcat-fieldname = 'V_LEGS'.
    x1_fieldcat-reptext_ddic = text-108.
    x1_fieldcat-ref_tabname = 'IT_ALV'.
    APPEND x1_fieldcat TO et_fieldcat.
    CLEAR x1_fieldcat.
    x1_fieldcat-col_pos = '2'.
    x1_fieldcat-fieldname = 'SUCCESS'.
    x1_fieldcat-key = 'X'.
    x1_fieldcat-reptext_ddic = text-109.
    x1_fieldcat-ref_tabname = 'IT_ALV'.
    APPEND x1_fieldcat TO et_fieldcat.
    CLEAR x1_fieldcat.
    x1_fieldcat-col_pos = '3'.
    x1_fieldcat-fieldname = 'V_LEGF'.
    x1_fieldcat-key = 'X'.
    x1_fieldcat-reptext_ddic = text-110.
    x1_fieldcat-ref_tabname = 'IT_ALV'.
    APPEND x1_fieldcat TO et_fieldcat.
    CLEAR x1_fieldcat.
    ENDFORM. " build_fieldcat
    FORM BUILD_LIST_HEADER *
    FORM x_list_header.
    DATA: x_list_header1 TYPE slis_listheader.
    *-----List Header: type H
    CLEAR x_list_header1 .
    x_list_header1-typ = 'H'.
    x_list_header1-info = text-105.
    APPEND x_list_header1 TO x_list_header.
    *-----List Key: type S
    x_list_header1-typ = 'S'.
    x_list_header1-key = text-106.
    x_list_header1-info = v_total.
    APPEND x_list_header1 TO x_list_header.
    *-----List Key: Type S
    CLEAR x_list_header1 .
    x_list_header1-typ = 'S'.
    x_list_header1-key = text-107.
    x_list_header1-info = v_succsount.
    APPEND x_list_header1 TO x_list_header.
    ENDFORM. " build_list_header
    FORM TOP_OF_PAGE *
    FORM top_of_page.
    CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
    it_list_commentary = x_list_header.
    ENDFORM. " TOP_OF_PAGE

  • How do I know which version to download?

    How do I know which version to download?

    If you are trying to Upgrade to Mountain Lion you must Purchase it.
    Be sure to make a Backup of your Current System Before Upgrading...
    Upgrade to Mountain Lion
    Check here for compatibility of 3rd party Software you may be using...
    http://roaringapps.com/apps:table
    You should also consider more RAM... Get the Maximum you can for your Mac...
    It is important to get the Correct and Matching RAM
    See Here  >  OWC RAM  >  http://www.macsales.com

  • How do I know which commands have been pushed to switch by PI CLI template

    We have PI version 1.3. I tried to deploy the built-in CLI template "vlan" just to create a vlan. I run the template and input vlan ID and name. The job is shown as successful in PI but the vlan is not created on the switch. In the transcript part of the job history, it only shows "configlet:response: config t". Please see the attachment for the screen shot. How do I know which commands have been pushed to the switch by the CLI template? How does PI push the CLI template to the switch? via snmp or telnet? I tried to run "debug tacacs authentication" and "debug tacacs accounting" on the switch because the switch is configured for command authentication and command accounting but I don't see any commands in the debug. It looks PI did not push any commands to the switch. Please help me to troubleshoot this.
    Thanks.

    The MPEG 2 Playback Component required by Streamclip is an optional purchase.
    http://store.apple.com/us/product/D2187Z/A
    There are other converters that can handle MPEG-2 files; try Handbrake.
    Regards.

  • Help, How to encrypt database exp  backup files?

    Hi all,
    Now, My customer want to encrypt the database backup file. We use exp command backup database, and the backup files can be restored on other servers.
    So, How to encrypt database exp backup files?
    Thanks.
    Eric David.

    Hi;
    In addition to Aman post, please mention your db and OS version,so we can help you more specificly.
    I also suggest please see below googling which mention and explain rman+encrypted backup
    http://www.google.com.tr/#hl=tr&sa=X&ei=dCAtTpuwHMjOswa1gOH3Dw&ved=0CBUQBSgA&q=RMAN%2Bencrypted+backup&spell=1&fp=503f556dbe78c402&biw=1280&bih=797
    Regard
    Helios

  • Transferring a Keynote presentation from my computer to another Mac. How do I know which fonts to transfer?

    I am transferring a large Keynote presentation from my computer to another Mac. How do I know which fonts were used in my presentation to be able to see if the other Mac has those as well?
    The Keynote notes says that fonts are NOT transferred with the presentation.
    Please email me the answer ASAP to "[email protected]".
    Thanks.

    I am syncing my iphone to my iTunes account and then I do a backup and also making sure all updates are current.  Then by going to the my phone and then going to the right and selecting the restore my iphone.
    Here is a picture of what I get

Maybe you are looking for