How do know which services use up my data on my tablet? 2:How can I avoid this?
How do know which services use up my data on my tablet? 2:How can I avoid this?
@mwbail2,
Great question! Managing your data usage is definitely important. You can view what apps are using data by going to Settings and then Mobile data on your phone. There is will show you the apps using data.
If you want to avoid the data usage on the apps you want to make sure you close out the apps when not in use. You can also make sure that they are not automatically updating whenever there is a new update to the app. To do this simply go to the Play Store and select Menu. Then go to Settings and there you will see the option to change the auto update to update over wifi only.
If you want to complete turn off data, just go to Settings and then mobile network and turn it off. Keep me posted if you need further assistance.
JohnB_VZW
Follow us on Twitter @VZWSupport
Similar Messages
-
2day my nokia mobile losed.how cen i know which using on my mobile
you will need to contact your network carrier, and notify the police in your country that your phone has been lost/stolen.
-
How to find which service using which port number
Hi,
Has anybody known how to check which port number is
being used by what service on WINNT4.0?
Thanks,The netstat command would help.
-
How to know which service accounts I am using inside my SharePoint server
We were asked to send a list of all the services accounts that are being used inside our SharePoint server, as the system administrators need to apply a new password policy. So to check which accounts I am currently using, I went to these locations:-
From the “IIS Manager” >> Application pool. I checked the identity column for all the domain users.
From >SharePoint CA >> Security >> Configure managed accounts.
So my question is basically if there could be any service accounts inside my SharePoint server, that are not in the above two locations ?
ThanksYes. SharePoint will add all service accounts it uses to the Managed Account list.
This will include accounts like the SharePoint Crawl Account which will not be used to run an Application Pool itself but will need to be part of your password change policy.
this means that in our case we have two accounts inside the "CA>>Security>>Managed Accounts" , and these are the ones used all over the sharepoint server ? is this correct ? -
How to know which type of jdbc driver used in my application
How to know which type of jdbc driver used in my application.
My approach will be....
Type1: you have to have ODBC s/w install on your machine...even the connection string starts with jdbc:odbc....so it can be identifed easily
Type2: you have to install client s/w in your machine...if you are using oracle oci driver ...you need to install oracle client s/w
Type3: you use servername / port to connnect to middleware
Type4: you do not need any client s/w
So, If your application works without any client s/w on your machine....you might be using Type4/Type3 driver.....otherwise Type2
Someone pls add more .... -
How to know which apple id is used to activate iphone?
I have iphone 4 which is second hand phone. So how to know which apple id is used to activate iphone. My id or first owner's id.
As i told i do not him, means where he will be, and i do not have his number. Is there any method to that is my id is used to activate iphone or other's id, without putting my iphone in activation lock.
-
How to know which port is being used by which process
Hi,
Could you please tell me how to know which port is being used by which process.as iam getting ports are already in use.
Thank you,
Sravan
Message was edited by:
sravan123Your OS might provide a command to support this question like '"netstat".
Besides, on Unix the pseudo-file system /proc is also useful. -
How to know which type of apple device am using
how to know which type of apple device am using
Check iPad model with the Serial Number
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Settings>General>About>Serial Number -
How to know which master data objects need to activated in R3
SALES OVERVIEW CUBE -0SD_C03
How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.
its very urgent please advise.
R/3 in RSA5
Sales Master Data
0ACCNT_ASGN_TEXT Account assignment group for this customer
0ACCNT_GRP_TEXT Customer account group
0BILBLK_DL_TEXT Locked
0BILBLK_ITM_TEXT Billing block for item
0BILL_BLOCK_TEXT Billing block in SD document
0BILL_CAT_TEXT Billing Category
0BILL_RELEV_TEXT Relevant for Billing
0BILL_RULE_TEXT Billing rule
0BILL_TYPE_TEXT Billing Type
0CONSUMER_ATTR Consumer
0CONSUMER_LKLS_HIER Consumer
0CONSUMER_TEXT Consumer
0CUST_CLASS_TEXT Customer Classification
0CUST_GROUP_TEXT Customer Group
0CUST_GRP1_TEXT Customer Group 1
0CUST_GRP2_TEXT Customer Group 2
0CUST_GRP3_TEXT Customer Group 3
0CUST_GRP4_TEXT Customer Group 4
0CUST_GRP5_TEXT Customer Group 5
0DEALTYPE_TEXT Sales Deal Type
0DEL_BLOCK_TEXT Delivery block (document header)
0DEL_TYPE_TEXT Delivery Type
0DISTR_CHAN_TEXT Distribution Channel
0DIVISION_TEXT Division
0DLV_BLOCK_TEXT Schedule line blocked for delivery
0DOC_CATEG_TEXT SD Document Category
0DOC_TYPE_TEXT Sales Document Type
0INCOTERMS_TEXT Incoterms (Part 1)
0INDUSTRY_TEXT Industry keys
0IND_CODE_3_TEXT Industry code 3
0IND_CODE_4_TEXT Industry code 4
0IND_CODE_5_TEXT Industry code 5
0IND_CODE_TEXT Industry code
0ITEM_CATEG_TEXT Sales document item category
0ITM_TYPE_TEXT FS item type
0KHERK_TEXT Condition Origin
0MATL_GRP_1_TEXT Material Group1
0MATL_GRP_2_TEXT Material Group 2
0MATL_GRP_3_TEXT Material Group 3
0MATL_GRP_4_TEXT Material Group 4
0MATL_GRP_5_TEXT Material Group 5
0MATL_TYPE_TEXT Material Type
0MAT_STGRP_TEXT Material statistics group
0NIELSEN_ID_TEXT Nielsen ID
0ORD_REASON_TEXT Order reason (reason for the business transaction)
0PICK_INDC_TEXT Indicator for picking control
0PRODCAT_TEXT Product Catalog Number
0PROD_HIER_TEXT Product Hierarchy
0PROMOTION_ATTR Promotion
0PROMOTION_TEXT Promotion
0PROMOTYPE_TEXT Promotion Type
0PROV_GROUP_TEXT Commission Group
0REASON_REJ_TEXT Reason for rejection of quotations and sales orders
0REBATE_GRP_TEXT Volume rebate group
0RECIPCNTRY_TEXT Destination country
0ROUTE_TEXT Route
0SALESDEAL_ATTR Sales deal
0SALESDEAL_TEXT Sales deal
0SALESORG_ATTR Sales organization
0SALESORG_TEXT Sales Organization
0SALES_DIST_TEXT Sales district
0SALES_GRP_TEXT Sales Group
0SALES_OFF_TEXT Sales Office
0SCHD_CATEG_TEXT Schedule line category
0SHIP_POINT_TEXT Shipping point/receiving point
In BW
Base Unit of Measure 0BASE_UOM
Bill-to party 0BILLTOPRTY
Calendar Day 0CALDAY
Calendar Year/Month 0CALMONTH
Calendar Year/Week 0CALWEEK
Change Run ID 0CHNGID
Company code 0COMP_CODE
Cost in statistics currency 0COST_VAL_S
Credit/debit posting (C/D) 0DEB_CRED
Distribution Channel 0DISTR_CHAN
Division 0DIVISION
Number of documents 0DOCUMENTS
Sales Document Category 0DOC_CATEG
Document category /Quotation/Order/Delivery/Invoice 0DOC_CLASS
Number of Document Items 0DOC_ITEMS
Fiscal year / period
Fiscal year variant 0FISCVARNT
Gross weight in kilograms 0GR_WT_KG
Number of Employees 0HDCNT_LAST
Material 0MATERIAL
Net value in statistics currency 0NET_VAL_S
Net weight in kilograms 0NT_WT_KG
Open orders quantity in base unit of measure 0OPORDQTYBM
Net value of open orders in statistics currency 0OPORDVALSC
Payer 0PAYER
Plant 0PLANT
Quantity in base units of measure 0QUANT_B
Record type 0RECORDTP
Request ID 0REQUID
Sales Employee 0SALESEMPLY
Sales Organization 0SALESORG
Sales group 0SALES_GRP
Sales Office 0SALES_OFF
Shipping point 0SHIP_POINT
Ship-To Party 0SHIP_TO
Sold-to party 0SOLD_TO
Statistics Currency 0STAT_CURR
In R3 RSA5 we have all the Master data data sources as mentioned above, and BW also. How to find the related Master data Infosource in R/3 Master data Data sources.
Thanks in advance,
Bhima.
Message was edited by: Bhima Chandra Sekhar GuntlaHi,
<i>How to know which master data objects need to activated from delivery version to active version in R/3 for a particular standard cube like 0SD_C03.</i>
I think, you are looking for master data sources(text,attributes,hier).Am i right?
If so, This cube has almost all SD master data characterstics. So you can activate all the all master data datasources of SD in r/3 (SD-IO).
Any way you requirement does not stop only by using this cube . You will activate all other cubes in SD also. So if you want to activate only needed master data datasources when you are activating a cube, the job becomes senseless. There is no problem(wrong) in activating all master data available under that application , even though you want to activate only one cube.
With rgds,
Anil Kumar Sharma .P -
How to determine which locale uses the specific process
Hi,
I would like to get to know which locale uses the specific process.
I mean that when the process starts it should use the current system locale.
Where I can check that information which locale are used by the running process?
I ask because I would like to make sure that for example when the locale are French or Japanese the process/deamon use the current locale.
Kind regards,
DanielVivaLaVida wrote:
Hi,
currently we are in the process of consolidating our databases. One of the neccessary steps is to figure out which user connects to the database at all. That's easy, we implemented a logon-trigger and log the collected information into a separate table.It could have been even easier by turning on the built-in audit feature.
If a user with objects (e.g. tables, views, procedures) exists - but this user never connects to the database - does that automatically mean that these objects are not used at all? No need to say that this is not true. But how can we figure out if a connected user has selected an object of this user?audit would be a good choice.
Our porblem is that we have alot of schemas in our database - but the developers don't know if this schema is not used by an application or not (sad but true).Not sure what developer will do with used/not used application.
To enable auditing would be one choice to figure out if an object was ever used or not. What's wrong in auditing ?
Even though audit may have a footprint on performance, that would probably be less costly than any custom solution.
Nicolas. -
How to know which interfaces are going to which switch?
How to know which interfaces are going to which switch ?
I know that cdp will show this information. But CDP will not show info about the devices connected to my device and whose link between is administratively down.
Regards,
ChanduI don't want to the end devices location.
For example, i have a switch that connect to multiple switches few using etherchannels and few using stand-along ports.
So assume that one of the link whether it may be entire port-channel or a stand alone link that connects to another switch has been shut down manually by some x person...
Then how can i know that which interfaces are connecting to that switch. In this case i think CDP will not help because it will hold the information of ports that are up.
Regards,
Chandu -
From report server database how to know reporting services server
from report server database how to know reporting services server
ThanksHi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support -
How to know which object is in which transport requeset
hi frnds
how to know which object is in which transport requesthi Preethi
try with transaction se01 then clic on the tools icon under the menu you will get a list of function.
then select search for object in transport request (maybe the text is a bit different) then enter information like for example R3TR OSOA and the name of a datasource. if you don't know the meaning of R3TR use the match code and use it also for objects you want to find infosource infoobject etc... don't forget to mark the flag select if your transport request is released or not and then execute you will get the list of all transport requests containing your search object.
hope this could help you
best regards
Boujema -
How to identify which service pack is installed in BO XI R2
Hi,
I am currently workng in BO XI R2. Can any one please let me know how to find which service pack is installed ?
Below is the version number mentioned in metrics under Central management server in CMC.
Version: 11.5.10.1263
Thanks
AnandHi,
take this Version Number and post it into the "Help & Support" are of the SAP Service Marketplace.
If all of your Servers have Version 11.5.10.1263 you are running on SP4.
For more Information check SAP Note - 1318289.
Regards
-Seb. -
How to know which process is consuming high percentage of cpu?
Hi,
How to check which process is consuming high percentage of cpu ?
how to know the cpu time is atleast 80% of the elapsed time and how to know which code the process is running?
I know we can check high performance cpu can be find by TOP command
but i dont know on solaris?
please help me on this?One way is to use my Snapper script for getting the breakdown ( see http://blog.tanelpoder.com/2007/12/06/oracle-session-snapper-v106-released/ for more info ).
An example snapshot (taken over 60 second period) is below:
SQL> @snapper out,gather=tw 60 1 "select sid from v$session where type = 'USER'"
-- Session Snapper v1.07 by Tanel Poder ( http://www.tanelpoder.com )
HEAD, SID, SNAPSHOT START , SECONDS, TYPE, STATISTIC , DELTA, DELTA/SEC, HDELTA, HDELTA/SEC
DATA, 2, 20080710 11:39:18, 61, TIME, repeated bind elapsed time , 1314, 22, 1.31ms, 21.54us
DATA, 2, 20080710 11:39:18, 61, TIME, parse time elapsed , 21518, 353, 21.52ms, 352.75us
DATA, 2, 20080710 11:39:18, 61, TIME, PL/SQL execution elapsed time , 809888, 13277, 809.89ms, 13.28ms
DATA, 2, 20080710 11:39:18, 61, TIME, DB CPU , 11204956, 183688, 11.2s, 183.69ms
DATA, 2, 20080710 11:39:18, 61, TIME, sql execute elapsed time , 12441308, 203956, 12.44s, 203.96ms
DATA, 2, 20080710 11:39:18, 61, TIME, DB time , 13825800, 226652, 13.83s, 226.65ms
DATA, 2, 20080710 11:39:18, 61, WAIT, read by other session , 4432, 73, 4.43ms, 72.66us
DATA, 2, 20080710 11:39:18, 61, WAIT, log file sync , 1215135, 19920, 1.22s, 19.92ms
DATA, 2, 20080710 11:39:18, 61, WAIT, db file sequential read , 1458168, 23904, 1.46s, 23.9ms
DATA, 2, 20080710 11:39:18, 61, WAIT, enq: TX - row lock contention , 11600, 190, 11.6ms, 190.16us
DATA, 2, 20080710 11:39:18, 61, WAIT, row cache lock , 420, 7, 420us, 6.89us
DATA, 2, 20080710 11:39:18, 61, WAIT, SQL*Net message to client , 1842, 30, 1.84ms, 30.2us
DATA, 2, 20080710 11:39:18, 61, WAIT, SQL*Net message from client , 9490531, 155582, 9.49s, 155.58ms
DATA, 2, 20080710 11:39:18, 61, WAIT, PL/SQL lock timer , 35759582, 586223, 35.76s, 586.22ms
DATA, 2, 20080710 11:39:18, 61, WAIT, events in waitclass Other , 302, 5, 302us, 4.95us
DATA, 20, 20080710 11:39:18, 61, TIME, repeated bind elapsed time , 1332, 22, 1.33ms, 21.84us
DATA, 20, 20080710 11:39:18, 61, TIME, parse time elapsed , 21439, 351, 21.44ms, 351.46us
DATA, 20, 20080710 11:39:18, 61, TIME, PL/SQL execution elapsed time , 799773, 13111, 799.77ms, 13.11ms
DATA, 20, 20080710 11:39:18, 61, TIME, DB CPU , 11303744, 185307, 11.3s, 185.31ms
DATA, 20, 20080710 11:39:18, 61, TIME, sql execute elapsed time , 12404247, 203348, 12.4s, 203.35ms
DATA, 20, 20080710 11:39:18, 61, TIME, DB time , 13792389, 226105, 13.79s, 226.1ms
DATA, 20, 20080710 11:39:18, 61, TIME, sequence load elapsed time , 752, 12, 752us, 12.33us
DATA, 20, 20080710 11:39:18, 61, WAIT, log file sync , 1228759, 20144, 1.23s, 20.14ms
DATA, 20, 20080710 11:39:18, 61, WAIT, db file sequential read , 1339772, 21963, 1.34s, 21.96ms
DATA, 20, 20080710 11:39:18, 61, WAIT, row cache lock , 395, 6, 395us, 6.48us
DATA, 20, 20080710 11:39:18, 61, WAIT, SQL*Net message to client , 1901, 31, 1.9ms, 31.16us
DATA, 20, 20080710 11:39:18, 61, WAIT, SQL*Net message from client , 9496607, 155682, 9.5s, 155.68ms
DATA, 20, 20080710 11:39:18, 61, WAIT, PL/SQL lock timer , 35786481, 586664, 35.79s, 586.66ms
DATA, 20, 20080710 11:39:18, 61, WAIT, events in waitclass Other , 96, 2, 96us, 1.57us
Tanel Poder
http://blog.tanelpoder.com
Maybe you are looking for
-
How to Create Inline Table to Display Detail Data in a Master Table in 11g?
Hi, I have a requirement to create inline table inside master table to show data. I found this 10g article for this http://download.oracle.com/docs/cd/B31017_01/web.1013/b28967/web_masterdetail006.htm#BABCDCGE I couldn't find such option in 11g. Am i
-
[XI 3.1] Issues during "Clean" install on Windows Server (64-bit) OS
Started setting-up a SANDBOX yesterday of BOE-XI (Release 3.1) on a "Clean" Windows Server (64-bit) OS. I hit a couple of issues that I think may be related to the DEFAULT "Program Files" location on the OS being... C:\Program Files (x86)\ ...rather
-
my mums Apple id was her work email after leaving the company a year ago the address is no longer active, dose she need to set a new one? Can we still change it over? Will she lose everything she has bought? Any advice? THank you
-
Lightroom 3 alive at Adobe - Switching process ?
Hello there, this is my first post to the Aperture forums ever, even if i've been a fellow user from the beginning... But that might well change soon, as i see that Adobe is really dedicated in making Lightroom the software of choice for photographer
-
Dependent transactions in bdc --KO01 AND IE01
Hello All, i have a task to record KO01 AND IE01 THROUGH BDC, i am able to record both the t.codes but not finding the link between both the t.codes,so can any please tell me in what way these two T.codes are dependent and functionality of them as we