How do l get Bridge CS5 to recognise scanner ?

Hi again good people of Adobe Bridge Fora.
I have installed CS5 Production Premium Suite this afternoon onto a new C drive 600GB HDD, with Win 7 x64 (used Vista for a few years with CS4 Production Premium so using the same hardware) Everything went well including the updates for Bridge, PP & Photoshop. I was checking to see if hardware like printers and scanners were working after the install of Win 7 when l went to Bridge to scan from there when l noticed that the option to scan was not available. The Twain files have been installed in the windows directory and l can start the scanner software outside of Bridge without problem, do l have to copy any files over myself to the Bridge directory to get the scanner to operate from there. The scanner is an Epson V700 Photo l used the latest drivers from Epson for Win 7/Vista.
Thanks for any help you may give.
Simon

Curt Y...
I have the same problem with my Epson V700 scanner, and I understood your response to the original posting. But I'd like to know if I have an option to install the Epson twain driver into Photoshop CS5, and if so, how do I do that? Epson tells me that this can no longer be done automatically, but they imply there is way to do it manually.

Similar Messages

  • How do I get bridge CS5 to open up with my saved workspace settings?

    Every time I open bridge it opens with large thumbnails in an old folder.  I have to "reset" my workspace (even though it is highlighted at the top of the page already!) and then select the last folder I was working on again.
    Is there any way to get bridge to remember your last used folder and last used workspace setting and just re-open with those already set?
    The  current situation just leads to lots more unnecessary annoying clicking.
    I've tried all the options I can find in preferences and tried creating ans saving different workspace settings but nothing seems to effect how bridge opens up the first time I use it in a session.  I am running it on Windows 7.
    Thanks,
    Clive

    That seems to solve it.  I think your point about exiting bridge before shutting down is important, but you need to make sure bridge is showing the set-up you want to keep first.  I now have a sensible opening screen. Thanks a lot.

  • How do I get Bridge CS5 to display CR2 previews???

    Dear wonderful Adobe community
    I have recently upgraded to Photoshop CS5 from CS4. As far as I can read/ascertain/gather Camera Raw 6 came with the package and installed when the main installation ran.
    Bridge CS4 displays my CR2 Raw file previews from my 5d MKII no problem. Bridge CS5 however does not and all I get is the statutory CR2 symbol.
    Can someone please help help help!
    Thanks :O)

    David,
    You may need to update Camera Raw to version 6.1RC (RC = Release Candidate or advanced beta).
    ACR 6, which ships with CS5, was frozen a long time ago, before ACR 5.7 shipped, and it does not support some cameras supported by ARC 5.7 in CS4.  I don't know if this applies to your camera model or not.
    For more info:
    http://blogs.adobe.com/lightroomjournal/2010/05/camera_raw_61_release_candidat.html
    You might need to purge the cache after updating to Camera Raw 6.1 and relaunching Photoshop and Bridge.

  • How do I get my ipad to recognise my pdf attachments as pdfs?

    My ipad does not always recognise a pdf file as as incoming mail attachment, so I cannot always open the pdf in another app.
    Although the attachment shows as a paperclip in the mail header, sometimes the content of the attachment is displayed in the body on the email. When this happens I don't get the small square window at the top right corner of the screen where you can select another app to open the pdf.
    How do I get my ipad to recognise my pdf attachments as pdfs and not show the content in the body of the mail message?

    This is from page 44 of the iPad User Manual:
    Open a meeting invitation or attachment: Tap the item. If the attachment can be used by multiple apps, touch and hold to choose an app that works with the file.
    Based on this, I suggest trying this:
    Touch and hold an area of the PDF file that displays in the body in your email.  Do you get the behavior described in the manual above?

  • Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks to anyone who can help!!

    Bridge wont recognizw my Nikon d610.  I am running windows 8 and photoshop cs6 with 8.6 camera raw plug in.  How can I get bridge to recognize my camera?  Thanks!!

    That camera model has been supported since ACR 8.3 and it is most certainly supported by ACR 8.6 and ACR 8.7 (beta).
    Either you have damaged, corrupt image files, or a faulty Photoshop and/or ACR installation.
    If there are no privacy issues, you can post one of your files to the FTP service of your choice (such as Dropbox or yousendit.com), post the link to it, and someone here can take a look at it for you.

  • HT1435 how do i get i tunes to recognise my i pod 4th generation

    How do I get I tunes to recognise my i pod shuffle 4th generation,as I keep getting fault message (2005)

    Hello there, CliveFromBR.
    The following Knowledge Base article covers the issue you're having with error 2005:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error2001
    Specifically the following:
    Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on)
    If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • How do I get Bridge to show PDF's with their dimensions in inches?

    How do I get Bridge to show PDF's with their dimensions in inches?
    I know how to tell Bridge to do it. But it seems the information is not embedded in the PDF's.
    Is there a way to make the PDF's be aware of their size in inches at authoring time?

    I'd like to have Bridge showing PDF dimensions in millimeters. Also dimensions for InDesign and Illustrator files in millimeters. Is this still an upcoming feature? I've been waiting for this since CS3...
    Thanks

  • How do i get my computer to recognise my devise?

    How do I get my computer to recognise my devise?

    - Start here.  It is normal and expecedt for the computer open the an image program wehn an iPod is conncted since that is how one syncs saved photo from the iPod to the computer.
    iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
    - You can try disabling the camera program from opening and see if that helps:
    http://support.apple.com/kb/TS1500
    - Have you installed a camera or scanner program or simlar recently and is that when the current problem started?  If so uninstall that program.

  • How do I get my iPad to recognise printer hp 1217nfw, I have a d-link router?

    How do I get my iPad to recognise my printer hp 1217nfw, connected with a d-link router?

    Don't know if you ever got this figured out but here is the answer...
    I just spent the last two days on this and have finally sorted it out. It actually isn't that hard to do but for some reason, no one has consolidated the information in one place!
    First and foremost, make sure that you have all the latest and greatest firmware updates for your printer, your computer and your mobile devices.
    Next, you need to connect your printer to your network via an ethernet cable, this is the only way to get in to the printer softare to configure it for your wireless network.
    Navigate the printer menus on the keypad to Reports>Config Report and print this report. It will provide you with the IP adress and IPv4 address for the printer.
    With the printer connected to your network and powered on, point your browser to the IP address of the printer. If this doen't work (it didn't for me) use the IPv4 address.
    This will open the configuration panel for the printer and will let you configure the wireless for the printer so that it can join your wireless network. You will see various tabs across the top. Select network. Then along the left you will see wireless. Choose that. Now you should see a list of wireless networks available including your very own home network. Choose that one, enter your password and hit apply.
    Disconnect the ethernet cable and you should be ready to Airprint from all devices. This worked for me, I can't imagine it won't work for all...then again...

  • I have just bought an ipod classic, I already have an ipod nano.  The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one

    I have just bought an ipod classic, I already have an ipod nano.  The new ipod was connected to the computer to charge and it named itself with my name on the old nano, how do I get the computer to recognise the new one?

    My mistake, it was nothing to do with format.  It woldn't sync because my movies were HD.  HD movies won't sync to an iopd classic 160 GB but when you purchase a HD movie, itunes gives you a SD vervsion of the movie which is compatible with the ipod.  Just needed to go to store, click movies, click purchased and untick the HD box and there you have the SD versions.  Download the SD versions and then sync your ipod and bobs you uncle, movies are on the ipod

  • How can I get my IMac to recognise the scanner part of the HP printer/scanner?  It prints!

    How can I get my iMac to recognise the scanner part of the HP printer/scanner?  It prints!@

    I had a similar problem right after the first update to 10.6.7, which happened to quite a few people.  It took a couple of software updates and then an HP printer update to fix it.  So make sure that all your software updates are up to date.   Mine is an older printer: C6280 All-in-one but scans fine now that my mac recoginises it.  You might want to check on the HP site also.
    It was really frustrating because it had worked fine before.
    laverne's mom
    Message was edited by: laverne's mom

  • How do I get my CS5 back?

    I purchased CS2 while in college and have been updating to CS5 currently then my PC crashed, all I have are the original disks for CS2 How do I get my CS5 back?

    Download a trial version of CS5 from http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    Follow the Very Important Instructions on that page first BEFORE you click the download links.
    Enter your serial number to license the software.

  • HT3775 my avi format is not being recognised everytime i try to play a movie through quicktime player...how do i get it to be recognised or what is solution please?? be easy on im a beginner with this mac book! thank you

    my avi format is not being recognised everytime i try to play a movie through quicktime player...how do i get it to be recognised or what is solution please?? be easy on im a beginner with this mac book! thank you

    Download and install Perian or VLC from the web.
    Message was edited by: hpr3

  • How can I get my exchange account recognised by my home mac?

    How can I get my exchange account recognised by my home mac? I got absorbed into the Mac world as I was given an iPad at work. I am having problems getting my work account synced with my new iMac at home. I work with Exchange at school and gmail and yahoo at home. I'd like to have my notes, agenda, contacts and Exchange account in sync... ¿Es poslble?
    Thanks!

    Depends what OS X and Browser you are using?
    If you are on Snow Leopard (10.6) and Safari (5.1.7) then open Safari Preferences, select the General tab and make sure that:
    1. Safari opens with: A new window
    2 New windows open with: Homepage
    3. Homepage: is set to the desired https: site

  • Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

    Just upgraded to Mavericks. How do I get my Epson Workforce 360 scanner to work again?

    Try Image Capture, which comes with your Mac. It should be in the Applications folder, or if not, try the Applications/Utilities folder. It should automatically find the right Epson driver for your scanner.
    Also, I'm guessing you have Epson 630 rather than 360. If so, see this from Epson Website.
    The latest printer and scanner drivers for this product are available from Apple's Software Update. Here's how to get them:
    Do one of the following:
    USB
    Connect your product to your Mac using a USB cable and make sure the product is turned on.
    Wireless
    Connect your product to your router wirelessly and make sure the product is turned on.
    Note: You'll need to use the product's control panel to establish the connection to your router.
    Ethernet
    Connect your product to your Mac using an Ethernet cable and make sure the product is turned on.
    Select the menu on your Mac, then Software Update.
    Do one of the following:
    If you see an update from Epson, select UPDATE to install it.
    Note: Apple Software Update may find multiple updates for your system. You may choose to install all or some of the updates.If an update is not available, you're done. You already have the latest drivers from Apple.
    Note: You can also use EPSON Scan if it's available for your product. To get it, go to the Epson main support page, select your product, then select Drivers & Downloads. Select Drivers, then Scanner Driver and EPSON Scan Utility.
    For more information on scanning in OS X, see our Image Capture FAQ.

Maybe you are looking for