How do make sure the only audio files in my "Audio Files" folder are what are currently used in my project?

I noticed my hard drive space was getting suspiciously low...
After doing a little digging I realized that every single audio file (even the ones i have deleted segments for in my projects' arrange windows) are being saved in every one of my projects' "Audio Files" folders.
One 4 minute song (comprised of 3 guitars, 1 bass, Midi drums, and a syth) has a cooresponding "Audio Files" folder containing over 1,600 Wav files and is consuming 3.0 + Gigs of hard drive space FROM THAT SONG ALONE!
It seems as if every take i have ever recorded (even If it is no longer represented in my projects's arrange windows) remains saved in these "Audio Files" folders.
Is there a setting/method to ensure what STAYS on my hard drive is only what is being used in the projects? There seems to be no logical reason for keeping every mistake that is otherwise deleted in the overall projects.
there must be... because hand-weeding out every file it too daunting a task to be feasible.....
THANKS!

Hi
When you delete a recorded region from the Arrange, Logic gives you an option to 'delete' or 'keep' the underlying audio file. You must've chosen to keep, or you have only been deleting regions which only refer to part of the file, so the whole audio file is still being 'used'.
One method of cleaning up is to go to the Audio Bin, choose Edit:Select Unused, and then Delete.
If you (really) want to tidy up further, you could use the Optimise Files function Audio Bin:Audio Files (but I'd suggest that you read up on that function in the manual to fully understand what it will do).
CCT

Similar Messages

How to make sure the maps are loaded though nokia ...

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

Hi,
I have downloaded new nokia map v.3.0109 to my nokia E75 and loaded maps by using nokia map loader (Asia).
but still I cant see the all regional map which I downloaded, without usign live internet connection.
How to make sure the maps are loaded properly to my mobile ?
with regards
Moderator's note: Email address removed. It is not wise to publish your personal information on a public forum.
Message Edited by myn1126 on 27-Jan-2010 07:54 AM

How to Make sure the doc is there in the target system??

Hello Everybody-
I am trying to send a vendor master to a R/3 system from XI via Proxy,I did not write any code in Proxy yet as it will be written by the ABAP guys later in the R/3 system, I see a checkered flag in the XI monitor,but is there any way i can make sure the document has reached the target system?
Thanks
Venkat

Below is the XML i am sending
<b> <?xml version="1.0" ?>
- <GenericVendor>
- <GenericVendorRecord>
<GenericVendorID>0000010015</GenericVendorID>
<BusinessPartner />
<GroupID>533</GroupID>
<LocalPartnerID>0000010015</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>778 Sunny Drive</Street60>
<TextLong>Auto Supplier</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010017</GenericVendorID>
<BusinessPartner />
<GroupID>534</GroupID>
<LocalPartnerID>0000010017</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>333 Clint Street</Street60>
<TextLong>Auto Switches Inc</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001006</GenericVendorID>
<BusinessPartner />
<GroupID>535</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001006</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cleveland</City>
<Street60>500 Woods Street</Street60>
<TextLong>Bosch Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001006</GenericVendorID>
<BusinessPartner />
<GroupID>535</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>0000010012</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Cleveland</City>
<Street60>500 Woods Street</Street60>
<TextLong>Bosch Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001004</GenericVendorID>
<BusinessPartner />
<GroupID>536</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001004</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>555 Superior Street</Street60>
<TextLong>Dana Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001004</GenericVendorID>
<BusinessPartner />
<GroupID>536</GroupID>
<Country>Canada</Country>
<LocalPartnerID>0000010010</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Toronto</City>
<Street60>555 Superior Street</Street60>
<TextLong>Dana Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010014</GenericVendorID>
<BusinessPartner />
<GroupID>537</GroupID>
<LocalPartnerID>0000010014</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>500 Charlotte Road</Street60>
<TextLong>Gates Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010013</GenericVendorID>
<BusinessPartner />
<GroupID>538</GroupID>
<LocalPartnerID>0000010013</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>500 Woods Street</Street60>
<TextLong>Metaldyne</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010011</GenericVendorID>
<BusinessPartner />
<GroupID>539</GroupID>
<LocalPartnerID>0000010011</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>555 Superior Street</Street60>
<TextLong>Teleflex</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010006</GenericVendorID>
<BusinessPartner />
<GroupID>540</GroupID>
<LocalPartnerID>0000010006</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>700 Sunny Drive</Street60>
<TextLong>Tenneco Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010007</GenericVendorID>
<BusinessPartner />
<GroupID>541</GroupID>
<LocalPartnerID>0000010007</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>test</Street60>
<TextLong>The Budd Co</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>0000010016</GenericVendorID>
<BusinessPartner />
<GroupID>542</GroupID>
<LocalPartnerID>0000010016</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<Street60>1000 Tara Belle Drive</Street60>
<TextLong>Tire Supplies</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001001</GenericVendorID>
<BusinessPartner />
<GroupID>543</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001001</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Houston</City>
<Street60>111 Corporate Way</Street60>
<TextLong>Visteon Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001001</GenericVendorID>
<BusinessPartner />
<GroupID>543</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>2000001001</LocalPartnerID>
<ClientSystemObjectType>SLD_BusinessSystemID</ClientSystemObjectType>
<City>Houston</City>
<Street60>111 Corporate Way</Street60>
<TextLong>Visteon Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001009</GenericVendorID>
<BusinessPartner />
<GroupID>545</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001009</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>777 Highway Drive</Street60>
<TextLong>Continental Tire</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001010</GenericVendorID>
<BusinessPartner />
<GroupID>546</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001010</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>333 Beach Street</Street60>
<TextLong>Cooper Standard</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001007</GenericVendorID>
<BusinessPartner />
<GroupID>547</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001007</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>546 Pebbles Road</Street60>
<TextLong>Fed Mogul Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001003</GenericVendorID>
<BusinessPartner />
<GroupID>548</GroupID>
<Country>Canada</Country>
<LocalPartnerID>1000001003</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Toronto</City>
<Street60>777 Highway Drive</Street60>
<TextLong>Goodyear</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001002</GenericVendorID>
<BusinessPartner />
<GroupID>549</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001002</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>777 Sunny Drive</Street60>
<TextLong>Johnson Controls</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001005</GenericVendorID>
<BusinessPartner />
<GroupID>550</GroupID>
<Country>United States Minor Outlying Islands</Country>
<LocalPartnerID>1000001005</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Chicago</City>
<Street60>111 Canal Street</Street60>
<TextLong>Kautex</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001011</GenericVendorID>
<BusinessPartner />
<GroupID>551</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001011</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>123 River Drive</Street60>
<TextLong>Lear Corp</TextLong>
</GenericVendorRecord>
- <GenericVendorRecord>
<GenericVendorID>1000001008</GenericVendorID>
<BusinessPartner />
<GroupID>552</GroupID>
<Country>Mexico</Country>
<LocalPartnerID>1000001008</LocalPartnerID>
<ClientSystemObjectType>BW</ClientSystemObjectType>
<City>Cancun</City>
<Street60>778 Sunny Drive</Street60>
<TextLong>Tower Automotive</TextLong>
</GenericVendorRecord>
</GenericVendor></b>
and the error iam getting is.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIProxy</SAP:Category>
<SAP:Code area="ABAP">PARSE_APPLICATION_DATA</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error during XML => ABAP conversion (; error ID: ; ( )) PARSE_APPLICATION_DATA Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000001 XML Bytepos.: 865 XML Path: GenericVendor(1)GenericVendorRecord(3)Country(4) Error Text: Data loss occurred when converting United States Minor Outlying Islands Kernel ErrorId: CONVT_DATA_LOSS)) Error during XML => ABAP conversion (Request Message; error ID: CX_ST_DESERIALIZATION_ERROR; (/1SAI/TXS00000000000000000001 XML Bytepos.: 865 XML Path: GenericVendor(1)GenericVendorRecord(3)Country(4) Error Text: Data loss occurred when converting United States Minor Outlying Islands Kernel ErrorId: CONVT_DATA_LOSS)) An error occurred when deserializing in the simple transformation program /1SAI/TXS00000000000000000001 Data loss occurred when converting United States Minor Outlying Islands</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error><b></b>
Message was edited by: Venkat Yalamanchili

How to make sure the change of NLS_LANG is working?

I want to show unicode through iSQL*PLUS.
Refer to the guide article,there are three steps to reach it.
1.browser encording :Unicode(UTF8)
2.database character set : UTF8
3.new environmental var : TRADITIONAL CHINESE_TAIWAN.UTF8
I make sure that the 1 and 2 steps are definitely reached.
But I'm not sure the apach server got the new parameter or not.It looks all the same.....
So,my question is how can I got the information(NLS_LANG parameter) of HTTPServer?
Besides,if anyone can teach me how to show unicode through iSQL*PLUS,I would be very greatful.
Thank in advance.

By Firefox index, did you mean site map?
Firefox doesn't keep an index of a web site. The web site does.
This sounds like a server configuration problem, not a browser problem. But could you please paste the full error messages(s) from Gater Host / WordPress?

How to set PS for the most reliable image previews and how to make sure the color spaces are the same across plateforms

I've been having an ongoing problem with some of my images changing color/luminance values after merging or flattening an image. This seems to most often happen if I use one of the filters (like crosshatch or notepaper, not sharpen or blur). I can make a copy using command/option/shift + E which most often will look exactly like what's on screen.
Some people have suggested that it's to do with resolution, PS showing me a low resolution image but I don't think so because the histogram changes -- sometimes in a big way, but most often those spikes in the luminance levels are shaved off. Also, when I have the image open at 100% and effect a merge/flatten, the color changes.
I'd like to know if there's a way to have PS show me one for one what I'm working on while I'm working on it, or if there is a way to control the color profiles when I'm saving. My best guess at this point is that there is a color profile mismatch going on somewhere. I just don't know where to look for it.
Typically I work in 16 bit, so my color space is set to ProPhoto RGB; my camera is set to the Adobe color space;
color management policies are set to preserve color profiles;
conversion options --> intent is set to relative colorimetric.

But it is calibrated. I use Xrite 1 and update it every month (on the first).
The colors can be really off. Here's an example.
https://flic.kr/p/r6A1Zd (what I want) https://flic.kr/p/qc5QTD (not what I want)
Also, I can't see how the bit depth will have any effect since the change in color happens in PS when I merge or flatten. It's 8 bit through the editing and 8 bit when I flatten it.
Have you any suggestions on what I can do on the computer side?

How to make sure the addon is running when user open the SAP B1 client?

Hi,
Is it possible that that we can set somewhere in SAP B1 setting and without running addon user can not login into SAP B1 client? I tried even set the addon to Mandatory in addon administration, but user still can choose running without addon. Any suggestion ?
Thanks!
Lan
Edited by: ZHANGLAN on Aug 19, 2010 10:49 PM

Hi All,
Maybe I didn't describe my situation clear enough. I have lot of lient PC with different environment, i am always be reported that the AddOn doesn't work. In most case they are caused by some unexpected reason like anti-virus softeware or windows update. If the addon crashes then user lost everything in addon and they will starti complaints... My idea is to make the addon as mandatory requirement before user can start to use SAP B1. But for now, the setting in addon administration is more like an option, end user still can be allowed to run SAP B1 without addon.
Lan

How to make sure the Live cache information is getting reflect in the bex?

Hi All,
When the user enters some data in the planning book as soon as he saves it. It should be getting reflected in the cube isnt it? when i run the query it doesnt get reflected?
What is the technical settings should i do ? to reflected those changes in apo 3.5 verison.?
Thanks
Pooja

Hi Pooja, Rafael,
You can actually have a bex report with life data.
For that you need to use a remote cube, and not a basic one.
On comment though: you access only the information stored in the live cache, so for example you will not get the projected stock easily.
By default the projected stock is not stored; but even if you sotre it in a time series key figure, you still need to run the calculation... so any changes in order will not be reflected untill the next sotck calculation...
So to get the projected stock real time is more complex and required some abap coding... to get the the order real time is quite easy to do with remote cube
Good luck
Julien

How to make sure the thread is completed?

Hi there,
Say I have a thread (A) and it's running.
is there anyway I can hold all other tasks/threads until the thread (A) is competed?
My GUI hasa button and once clicked some events happens. I would like to restrict the user from clicking the button again until thread A is completed.
any idea?
peter

Hi there,
Say I have a thread (A) and it's running.
is there anyway I can hold all other tasks/threads
until the thread (A) is competed?
My GUI hasa button and once clicked some events
happens. I would like to restrict the user from
clicking the button again until thread A is
completed.
any idea?
petereither..
Thread someOtherThread;
synchronized(this)
   try
        while(someOtherThread.isAlive())
           try
                     // preemptive wait. is better that sleep
                     // which leaves the Thread ON the scheduler list.
                     // This loop will eat about 0% CPU
               notifyAll();
               wait(100);   // Tweak poll time to taste
          catch(InterruptedException ie)
   catch(NullPointerException npex)
}OR
use
try
someOtherThread.join();
catch(InterruptedException ie)
}T)

How to make sure the input is an Integer?

The code is like this:
import java.awt.event.*;
import java.awt.*;
import javax.swing.*;
import java.io.*;
public class addPanel extends JPanel implements ActionListener {
     private JLabel lblName, lblStreetNum, lblStreetName, lblSuburb, lblPostcode, lblTele, lblEmail, lblPackage;
     private JButton btnAdd, btnClear;
     private JButton btnLoad;
     private JScrollPane scroll;
     private JRadioButton rbtnBasic, rbtnMovie, rbtnPlus;
     private JTextField txtName, txtStreetNum, txtStreetName, txtSuburb, txtTele, txtEmail, txtPostcode;
     private JTextArea display;
* Create a new <code>addPanel</code>.
* Here goes the design and implementation of the search panel.
* The user can enter all the fields that specific the subscriber's information.
     public addPanel() {
          setLayout(new BorderLayout());
          JPanel all = new JPanel(new FlowLayout());
          lblName = new JLabel("Name:");
          lblName.setPreferredSize(new java.awt.Dimension(100, 20));
          lblStreetNum = new JLabel("Street Number:");
          lblStreetNum.setPreferredSize(new java.awt.Dimension(100, 20));
          lblStreetName = new JLabel("Street Name:");
          lblStreetName.setPreferredSize(new java.awt.Dimension(100, 20));
          lblSuburb = new JLabel("Suburb:");
          lblSuburb.setPreferredSize(new java.awt.Dimension(100, 20));
          lblPostcode = new JLabel("Postcode:");
          lblPostcode.setPreferredSize(new java.awt.Dimension(100, 20));
          lblTele = new JLabel("Telephone:");
          lblTele.setPreferredSize(new java.awt.Dimension(100, 20));
          lblEmail = new JLabel("Email:");
          lblEmail.setPreferredSize(new java.awt.Dimension(100, 20));
          lblPackage = new JLabel("Package:");
          lblPackage.setPreferredSize(new java.awt.Dimension(100, 20));
          txtName = new JTextField("");
          txtName.setPreferredSize(new java.awt.Dimension(300, 25));
          txtStreetNum = new JTextField("");
          txtStreetNum.setPreferredSize(new java.awt.Dimension(300, 25));
          txtStreetName = new JTextField("");
          txtStreetName.setPreferredSize(new java.awt.Dimension(300, 25));
          txtSuburb = new JTextField("");
          txtSuburb.setPreferredSize(new java.awt.Dimension(300, 25));
          txtPostcode = new JTextField("");
          txtPostcode.setPreferredSize(new java.awt.Dimension(300, 25));
          txtTele = new JTextField("");
          txtTele.setPreferredSize(new java.awt.Dimension(300, 25));
          txtEmail = new JTextField("");
          txtEmail.setPreferredSize(new java.awt.Dimension(300, 25));
          btnAdd = new JButton("Add");
          btnAdd.setPreferredSize(new java.awt.Dimension(90, 25));
          btnClear = new JButton("Clear");
          btnClear.setPreferredSize(new java.awt.Dimension(90, 25));
          btnLoad = new JButton("Load");
          btnLoad.setPreferredSize(new java.awt.Dimension(90, 25));
          btnLoad.addActionListener(this);
          btnAdd.addActionListener(this);
          btnClear.addActionListener(this);
          rbtnBasic = new JRadioButton("Basic");
          rbtnBasic.setSelected(true);
          rbtnMovie = new JRadioButton("Movie Essentials");
          rbtnPlus = new JRadioButton("Entertainment Plus");
          ButtonGroup group = new ButtonGroup();
          group.add(rbtnBasic);
          group.add(rbtnMovie);
          group.add(rbtnPlus);
          JPanel rbtnPanel = new JPanel (new GridLayout(3,1));
          rbtnPanel.setPreferredSize(new java.awt.Dimension(300, 90));
          rbtnPanel.add(rbtnBasic); rbtnPanel.add(rbtnMovie); rbtnPanel.add(rbtnPlus);
          display = new JTextArea( 100, 130);
          display.setPreferredSize(new java.awt.Dimension(350, 200));
          scroll = new JScrollPane();
          scroll.setVerticalScrollBarPolicy(ScrollPaneConstants.VERTICAL_SCROLLBAR_ALWAYS);
          scroll.setHorizontalScrollBarPolicy(ScrollPaneConstants.HORIZONTAL_SCROLLBAR_NEVER);
          scroll.setPreferredSize(new java.awt.Dimension(350, 200));
          scroll.getViewport().add(display);
          all.add(lblName); all.add(txtName);
          all.add(lblStreetNum); all.add(txtStreetNum);
          all.add(lblStreetName); all.add(txtStreetName);
          all.add(lblSuburb); all.add(txtSuburb);
          all.add(lblPostcode); all.add(txtPostcode);
          all.add(lblTele); all.add(txtTele);
          all.add(lblEmail); all.add(txtEmail);
          all.add(lblPackage); all.add(rbtnPanel);
          all.add(btnAdd); all.add(btnClear);
          all.add(scroll);
          add(all);
     public void actionPerformed (ActionEvent e) {
          String ac = e.getActionCommand();
          String testStNum = txtStNum.getText();
          String testPostcode = txtPostcode.getText();
          String testTele = txtTele.getText();
          String packageType = "";
          if (rbtnBasic.isSelected()) { packageType = "Basic";}
          else if (rbtnMovie.isSelected()) { packageType = "Movie Essentials";}
          else if (rbtnPlus.isSelected()) { packageType = "Entertainment Plus";}
          // if "add" button is pressed
          if (ac.equals("Add")) {
//               int stNum = Integer.parseInt(testStNum);
//               int tele = Integer.parseInt(testStNum);
//               int postcode = Integer.parseInt(testStNum);
               // check the user has enter the fields or not
               if ( (txtName.getText().equals("")) ||
               (txtStreetNum.getText().equals("")) ||
               (txtStreetName.getText().equals("")) ||
               (txtSuburb.getText().equals("")) ||
(txtPostcode.getText().equals("")) ||
(txtTele.getText().equals("")) ||
(txtEmail.getText().equals("")) ) {
                    display.append("Please fill in the fields in order to add a Subscriber!\n\n");
               else {
                    session.addSubscriber(txtName.getText() , txtStreetNum.getText(), txtStreetName.getText(), txtSuburb.getText(), txtPostcode.getText(), txtTele.getText(), txtEmail.getText(), packageType);
                    display.append("Subscriber successfully added!\n\n");
                    txtName.setText(""); txtStreetNum.setText("");
                    txtStreetName.setText(""); txtSuburb.setText("");
                    txtTele.setText(""); txtEmail.setText(""); txtPostcode.setText("");
          if (ac.equals("Clear")) {
               txtName.setText(""); txtStreetNum.setText("");
               txtStreetName.setText(""); txtSuburb.setText("");
               txtTele.setText(""); txtEmail.setText(""); txtPostcode.setText("");
               display.setText("");
This is kinda stupid actually,
I want the input of txtStNum, txtPostcode, and txtTele must be Integer.
If they are not Integer, the session.addSubscriber() will not be called,
and in the TextArea --> display tell the user to input Integer......
Thanks..

Ok, that was difficult to read because you didnt use [ code ] tags... however... maybe this is something you could use with a keylistener for your text boxes
    public static void checkIsNumber(java.awt.event.KeyEvent evt){
        char c = evt.getKeyChar();
        //checks to see if the Key hit is a digit or backspace or delete
        if (!((Character.isDigit(c) ||
        (c == java.awt.event.KeyEvent.VK_BACK_SPACE) ||
        (c == java.awt.event.KeyEvent.VK_DELETE) ||
        (c == java.awt.event.KeyEvent.VK_MINUS)))) {
            //If not then beep and consume the event.
            Toolkit.getDefaultToolkit().beep();
            evt.consume();
    }If you don't want negitive numbers then take out the VK_MINUS portion of the if.
This thing goes in your keyTyped event, if the input from the key is incorrect the program beeps at you and does nothing. you could easily change it to fit whatever needs you may have (such as displaying the error)

How to make iTunes the default on my MacBook Pro

I recently updated iTunes and now I'm having trouble making it my default music player. Any ideas?

Hi ajjacoby14,
To make iTunes the default application to use for playing music, use the steps found in this article -
iTunes for Windows: How to make iTunes the default application for music and audio files
Thanks for using Apple Support Communities.
Best,
Brett L

How can i make sure the graphic file from my subcontract create is really llegal?

how can i make sure the graphic file from my subcontract create is really llegal?
They have creat the PNG file which creat from Adobe Illustrator CS5.
I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
Thanks

I have try checking on Metadata In Adobe Bridge, and it seem to be blank.
So i would likt to know how can i make sure the graphic file from my subcontract create is really llegal?
shoo: if i had to do that for every file i get i would go insane, as scott said, post contract: files that they (sub contractor) supply you, presume them ok unless you KNOW otherwise, or a copyright flag pops up contradicting ownership.
G

I keep getting urgent msgs to download 3.6. I have done so, but the download doesn[t seem to finish completely. How can I make sure the download has occurred? h s

I have dowloaded both 3.6 and 4.1 exe, however, I still get the urgent mesg from firefox. My download file shows that the downloads took place, but I guess they never were completely installed. How can I check to make sure the downloads are installed? Will the urgent messages stop when the downloads are truly installed?'

Do a clean (re-)install:
* Download a fresh Firefox copy and save the file to the desktop.
* http://www.mozilla.com/firefox/all.html
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version (doesn't apply to Firefox 3.0.x).
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a (re)install.
*[http://kb.mozillazine.org/Profile_folder_-_Firefox]

How to make sure spell-check in the right language?

The Windows 7 operating system in use is set to Australian English, and so is the Microsoft Office 2010 installed.
For some reason, the Word installed like this web site does not recognize Australian words such as 'leukaemia' and 'favour' which I believe are the British or Australian spelling. It insists on 'leukemia' and 'favor' respectively.
Have I missed something?

You will need to ensure the proofing language for the document is now set to Australian English (via Ctrl-A, then Review>Language>Set Proofing Language). While there, make sure the 'Do not check spelling or grammar' option is
not checked and click on the 'Set As Default' button. Then go to File|Options|Proofing and click on 'Check Document'.
As I said before I can't make any change on Review>Language>Set Proofing Language. Both English (Australia) and English (U.S.) are checked. I have both options at the bottom unchecked. They are ""Do not check spelling or
grammar" and "Detect language automatically". The latter was checked before but it didn't make any difference.
I am logged in as a standard user only but it shouldn't make any difference.

HT200131 how to make sure only my laptop can connect to my apple tv?

I don't want to see my flatmate apple tv under "connect"
how to make sure I don't click on his tv accidentally and he won't be able to connect mine?
thank you!

Hey J-Justin,
Great question! You can name your Apple TV to differentiate it from others in the AirPlay list:
Apple TV: Change the name of your Apple TV - Apple Support
http://support.apple.com/en-us/HT200028
Furthermore, you can setup an onscreen code or password to restrict access for AirPlay. The password method sounds like the best option for your setup:
Apple TV (2nd and 3rd generation): Understanding AirPlay settings - Apple Support
http://support.apple.com/en-us/HT202618
Set a password
Go to Settings > AirPlay > Security > Password > [set password]. You can use this setting to require a password for AirPlay-enabled devices to connect using AirPlay on the Apple TV. Use this setting if your device will need permanent access and you only want to enter the password once.
Thanks,
Matt M.

Error: Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.

when trying to download new messages into Thunderbird, I keep getting the error message:
Unable to write the email to the mailbox. Make sure the file system allows you write privileges, and you have enough disk space to copy the mailbox.
what does this mean and how do I correct it???
thanks

I have this problem too, but my Inbox is empty. There are 125 emails waiting on the server, including one i just sent from another address.
The site you recommended is "having difficulties".
May 4
I have now accessed the KB article above. None of the recommended actions made a difference. I deleted about half the 130 emails awaiting download from web-mail, but still got the same error. I can't clean out the inbox because I can't download emails yo it :-( I have 3 other addresses operating under the same server satisfactorily.

How do make sure the only audio files in my "Audio Files" folder are what are currently used in my project?

Similar Messages

Maybe you are looking for