How do make this query ?
CREATE TABLE CLIENT (
CLIENTID NUMBER PRIMARY KEY,
NAME VARCHAR2(40)
CREATE TABLE SALESMAN (
SALESMANID NUMBER PRIMARY KEY,
NAME VARCHAR2(40),
ALL_CLIENTS NUMBER -- ACCESS ALL CLIENTS IF VALUE IS 1
CREATE TABLE CLIENTSALESMAN (
SALESMANID NUMBER,
CLIENTID NUMBER
INSERT INTO CLIENT VALUES(1,'Bob');
INSERT INTO CLIENT VALUES(2,'Jhon');
INSERT INTO CLIENT VALUES(3,'Robert');
INSERT INTO CLIENT VALUES(4,'Clarck');
INSERT INTO SALESMAN VALUES (1,'Christina',0);
INSERT INTO SALESMAN VALUES (2,'Doug',1); -- access all clients
INSERT INTO CLIENTSALESMAN VALUES (1,1);
INSERT INTO CLIENTSALESMAN VALUES (1,2);
How do you return all the clients of a salesman ? same that SALESMAN.ALL = 1 OR SALESMAN.ALL = 0.
the salesman.all is 1 then he access all clients no need insert in CLIENTSALESMAN. If SALESMAN.ALL = 0 he
access clientsalesman.
Does somebody some suggestion how i make this ?
thanks !
1 select *
2 from (select a.name SALESMAN, b.name CLIENT
3 from salesman a, client b, clientsalesman
4 where a.SALESMANID = c.SALESMANID
5 and b.CLIENTID = c.CLIENTID
6 union
7 select a.name SALESMAN, b.name CLIENT
8 from salesman a, client b
9 where a.ALL_CLIENTS = 1)
10* where salesman = '&1'
SQL> /
Enter value for 1: Christina
old 10: where salesman = '&1'
new 10: where salesman = 'Christina'
Christina Bob
Christina Jhon
SQL> /
Enter value for 1: Doug
old 10: where salesman = '&1'
new 10: where salesman = 'Doug'
Doug Bob
Doug Clarck
Doug Jhon
Doug RobertNicolas.
Similar Messages
-
How to make this query go faster
Hi ,
I have the following query :
select a.* from
tbl1 a , tbl2 b
where a.id = b.id
substr(b.id , 3, 2) <> 'XX'
and b.date1 is not null
and b.date1 >= sysdate - 90 ;
tbl1 - 21 million rows
tbl2 - 2 millions
i specify this hints /*+ INDEX(idxa_1 , idxa_2) INDEX(ixdb_1)
where idxa_1 --> b.lotid
idxa_2 --> b.date1
idxb_1 --> a.lotid
IF i DO NOT include b.date1 is not null and b.date1 >= sysdate - 90 ,
from explain plan i could see it using a FAST FULL SCAN which really returns very fast
HOWEVER if i include b.date1 is not null and b.date1 >= sysdate - 90
, from explain plain it uses row index and then there's a range scan and its slow
how can i improve the performance of this query ?
pls advise
tks & rdgsDon't create the temporary table.
Create a function based index on table two
substr(id , 3, 2)Make sure you have gathered statistics on the tables.
Remove the hint.
select a.* from
tbl1 a , tbl2 b
where a.id = b.id
and substr(b.id , 3, 2) <> 'XX'
and b.date1 >= sysdate - 90;If you still have performance problems, post the formatted explain plan from sqlplus.
Read the Performance Tuning Guide.
Unfortunately this is not urs advice. -
hi,
i have 2 tables emp1 & emp2
emp1 consist
empno month amt
001 201002 200
001 201003 100
emp2 consist
empno month amt
001 201001 100
001 201002 200
001 201003 100
i want to make a query on emp1 table where i want to show amt according to month ,if data is not available in emp1 table then only then it should take data from emp2 table ,if emp2 has that month data o/w 0.
my output should be like this
empno month amt
001 201001 100
001 201002 200
001 201003 100
regardsMay be....
SQL> WITH emp1 AS (SELECT '001' empno,'201002' mon,200 amt FROM DUAL UNION ALL
2 SELECT '001' empno,'201003' mon,100 amt FROM DUAL
3 )
4 ,emp2 AS ( SELECT '001' empno,'201001' mon,100 amt FROM DUAL UNION ALL
5 SELECT '001' empno,'201002' mon,200 amt FROM DUAL UNION ALL
6 SELECT '001' empno,'201003' mon,100 amt FROM DUAL
7 )
8 SELECT coalesce(e1.empno,e2.empno) empno,
9 coalesce(e1.mon,e2.mon) mon,
10 coalesce(e1.amt,e2.amt)amt
11 FROM emp1 e1 FULL OUTER JOIN emp2 e2
12 ON e1.empno =e2.empno
13 AND e1.mon=e2.mon
14 ORDER BY 2 ;
EMP MON AMT
001 201001 100
001 201002 200
001 201003 100 -
How to make this query more efficient
Hi, i have query to find out the count of records based on certain conditions like below.
SELECT count(*)
FROM new_orders WHERE card_number IS NOT NULL
AND exp_date IS NOT NULL
AND card_id in ( select card_id from old_orders );
There are millions of records in both the tables. , so it is taking long time to run. Is there any solution to optimize this query.....thanks for help. Bcjyou might want to give this a try.
SELECT count(*)
FROM new_orders no
WHERE no.card_number IS NOT NULL
AND no.exp_date IS NOT NULL
AND exists (select 'x'
from old_orders oo
where oo.card_id = no.card_id);it would also help if you can post the information needed as suggested by rob. -
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
} ON COLUMNS,
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
)} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]Hi Ramparasad,
In your query, you add a measures and dimension on Row axis which is not supported in query designer in SSRS. Please use the query below.
WITH
MEMBER [FYDay].[DateHierarchy].[CurrentDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PreviousDay] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .PREVMEMBER }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay1] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(1) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay2] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(2) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay3] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(3) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay4] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(4) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay5] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(5) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay6] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(6) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[CurrentDay7] AS AGGREGATE(
{ [FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014] .LEAD(7) }
, [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[PTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FPERIOD],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
MEMBER [FYDay].[DateHierarchy].[WTD] AS AGGREGATE(PERIODSTODATE([FYDay].[DateHierarchy].[FWEEK],
[FYDay].[DateHierarchy].[FYEAR].&[2014].&[4].&[10].&[41].&[09/11/2014]
), [Measures].CURRENTMEMBER)
SELECT
[Measures].[Store Budget],
[MEASURES].[SNAPSHOTSOLDAMOUNT],
[MEASURES].[SHIPPEDAMOUNT],
[MEASURES].[SHIPPED VS SOLD],
[Measures].[% To Budget]
}ON COLUMNS,
{ [FYDay].[DateHierarchy].[WTD],
[FYDay].[DateHierarchy].[PTD],
[FYDay].[DateHierarchy].[PreviousDay],
[FYDay].[DateHierarchy].[CurrentDay],
[FYDay].[DateHierarchy].[CurrentDay1],
[FYDay].[DateHierarchy].[CurrentDay2],
[FYDay].[DateHierarchy].[CurrentDay3],
[FYDay].[DateHierarchy].[CurrentDay4],
[FYDay].[DateHierarchy].[CurrentDay5],
[FYDay].[DateHierarchy].[CurrentDay6],
[FYDay].[DateHierarchy].[CurrentDay7]
{[STOREMASTER].[SERVICINGDC].[SERVICINGDC].ALLMEMBERS}
} ON ROWS
from ( select {[STOREMASTER].[SERVICINGDC].&[Houston]} on columns
FROM [Model]
Regards,
Charlie Liao
TechNet Community Support -
How to make this query efficient
create table temp)au_sa_poi_geocoding2 as select idx, address_form, suburb_form
from temp_au_Sa_poi_geocoding a where idx not in (select idx from gc1_Sa_sub where status='m' ) and exists (select null from sh_poi_small cites c
where upper (trim(a.suburb_form))=c.city)
one table contain round 74214 records while the other has less than that.
the tables were not indexed, i created index using the following commands.
create index sa_idx on temp_au_sa_poi_geocoding(idx)
create index sa1_idx on gc1_sa_sub(idx)
anyhelp would be appreciated.
thankscreate index sa0_idx on temp_au_Sa_poi_geocoding(upper(trim(suburb_form)));
create index sa1_idx on gc1_sa_sub(status,idx); -- instead of only (idx)
create index sh_idx on sh_poi_small (city);
then try as follows
create table temp_au_sa_poi_geocoding2 as select idx,
address_form, suburb_form
from temp_au_Sa_poi_geocoding a where idx not in
(select /*+ index gc1 */ idx from gc1_Sa_sub gc1 where status='m' ) and
exists (select /*+ index_join c a */ null from sh_poi_small cites c
where upper (trim(a.suburb_form))=c.city)
however effects of indexes will vary by cardinality. -
hi,
i have a product table like
product month1 month2 month3 .................
soap 1200 1256 1895 ............
i want use a query where i can select column name with a parameter.
like
select month||:num from product;
in num variable it cud be 1 to 10 of value that is dependent on my program.
so how to make this query .
thxsHi,
Here is an example that i am helpful.
In the example , I am using a table 'table_name' which contains columns like
assign_attribute1
assign_attribute2
assign_attribute15
Now I will pass any number from 1 to 15 to the function.
create or replace procedure pass_col_number(v_number varchar2) as
v_sql varchar2(2000);
v_assign_attribute1 varchar2(150);
begin
v_sql := 'select assign_attribute'||v_number||' from table_name where person_id = 1345';
execute immediate v_sql into v_assign_attribute1;
dbms_output.put_line('v_assign_attribute1='||v_assign_attribute1);
end;Edited by: Sreekanth Munagala on Dec 18, 2008 1:18 AM -
How to write this query to filter combination of few values
Hi,
I have a table CHIMM which is a transaction table and contains information of the vaccines given to a child.
columns are: child_id, vacc_id, vacc_given_dt. I have to query for remaining vaccines.
HEXA is a vaccine_id which is composite vaccine of DPT1,POL1,HBV1 & HIB1 (vaccine ids).
I want to write to query if any of DPT1,POL1,HBV1 & HIB1 given then HEXA should not be displayed in the result.
OR
if HEXA is given then of course any of DPT1,POL1,HBV1 & HIB1 should not be displayed in the result.
How to write this query?
RegardsHi,
I'm still not sure what the output you want from that sample data is. Do you just want the child_ids, like this
CHILD_ID
3
4? If so, here's one way to get them:
WITH all_vacc_ids AS
SELECT c.child_id
, c.vacc_id AS child_vacc_id
, v.vacc_id
, COUNT ( CASE
WHEN c.vacc_id = 'HEXA'
THEN 1
END
) OVER ( PARTITION BY c.child_id
) AS hexa_itself
FROM vacc v
LEFT OUTER JOIN chimm c PARTITION BY (c.child_id)
ON c.vacc_id = v.vacc_id
WHERE v.vacc_desc = 'HEXA' -- See note below
SELECT child_id
FROM all_vacc_ids
WHERE child_vacc_id IS NULL
AND vacc_id != 'HEXA'
AND hexa_itself = 0
GROUP BY child_id
rha2 wrote:there are alot of vaccines, i just put 3 for example. this query gives error: invalid relational operatorAre you saying that the vacc table contains other rows, but those other rows are not needed for this problem? It would be good if you included an example in the sample data. The query above considers only the rows in vacc where vacc_desc='HEXA'. You can have other rows in the vacc table, but they won't affect the output of this query. The query above makes no assumptions about the number of rows that have vacc_desc='HEXA'; it will report all child_ids who are missing any of them, regardless of the number (assuming the child does not have the 'HEXA' vacc_id itself, like child_id=1).
You still haven't said which version of Oracle you're using. The query above will work in Oracle 10 (and higher). -
How To Make Search Query Showing the Result As List of Buttons.
Can some one give me an idea how to start to make a Search Query showing the results as list of buttons.. i have already have my buttons with names. i just dont know how to make a search query.
this is my on screen keyboard i made..
im making a system that the result were a list of buttons.. showing like this
This was supposed to be the output of the query that i need to do..
Please help me.. i just need a idea or tips how to make this one.Here is code I posted recently for another question
Public Class Form1
Const BUTTON_SIZE As Integer = 20
Const SPACE As Integer = 5
Sub New()
' This call is required by the Windows Form Designer.
InitializeComponent()
' Add any initialization after the InitializeComponent() call.
Dim buttons As New List(Of List(Of MyRadioButton))
For row = 1 To 6
Dim newRow As New List(Of MyRadioButton)
buttons.Add(newRow)
For col = 1 To 6
Dim button As New MyRadioButton()
button.row = row
button.col = col
button.Height = BUTTON_SIZE
button.Width = BUTTON_SIZE
button.Left = col * (BUTTON_SIZE + SPACE)
button.Top = row * (BUTTON_SIZE + SPACE)
button.Name = String.Format("radGr1{0}_{1}", row.ToString(), col.ToString())
Me.Controls.Add(button)
newRow.Add(button)
AddHandler button.CheckedChanged, AddressOf Radio_Change
Next col
Next row
End Sub
Private Sub Radio_Change(ByVal sender As Object, ByVal e As System.EventArgs)
Dim button As MyRadioButton = CType(sender, MyRadioButton)
Dim row As Integer = button.row
Dim col As Integer = button.col
End Sub
End Class
Public Class MyRadioButton
Inherits RadioButton
Public row As Integer
Public col As Integer
End Class
jdweng -
Could you please help me make this query less complicated
could you please help me make this query less complicated
select t1.R_OBJECT_ID
from dm_relation_sp a, ddt_resolution_sp t1
where a.parent_id = '0900000283560456' -----------ID
and a.child_id = t1.R_OBJECT_ID
union all
select t3.R_OBJECT_ID
from ddt_resolution_sp t3
where t3.R_OBJECT_ID in (select t2.child_id
from dm_relation_sp t2
where t2.parent_id in (select a.child_id
from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
where a.parent_id = '0900000283560456' -----------ID
and a.child_id = t1.R_OBJECT_ID))
union all
select t4.R_OBJECT_ID
from ddt_resolution_sp t4
where t4.R_OBJECT_ID in(
select t3.child_id from dm_relation_sp t3
where t3.parent_id in (
select t2.child_id
from asud_fsk.dm_relation_sp t2
where t2.parent_id in (select a.child_id
from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
where a.parent_id = '0900000283560456' -----------ID
and a.child_id = t1.R_OBJECT_ID))
and t3.relation_name = 'RESOLUTION_RELATION')
union all
select t5.R_OBJECT_ID
from ddt_resolution_sp t5
where t5.R_OBJECT_ID in
(select t4.child_id
from dm_relation_sp t4
where t4.parent_id in(
select t3.child_id from dm_relation_sp t3
where t3.parent_id in (
select t2.child_id
from asud_fsk.dm_relation_sp t2
where t2.parent_id in (select a.child_id
from asud_fsk.dm_relation_sp a, asud_fsk.ddt_resolution_sp t1
where a.parent_id = '0900000283560456' -----------ID
and a.child_id = t1.R_OBJECT_ID))
and t3.relation_name = 'RESOLUTION_RELATION')
and t4.relation_name = 'RESOLUTION_RELATION')
Edited by: user13025450 on 29.04.2010 16:23Hi,
Welcome to the forum! You'll find that there are many qualified people (such as Tubby) willing to help you. Will you do what you can to help them? In order to simplify the query you posted,someone will first have to understand what it does, what the tables that it uses are like, and what tools you have to work with (that is, what version of Oracle, and any other software you are using). To actually test their ideas, people will need versions of your tables.
Many people, if they spent enough time, might be able to figure out roughly what you are doing, make some tables themselves and test a solution. You can help with all of that. I assume you already know what the appliction is, and what this particular query is supposed to do: you don't have to figure out any of that, you just have to say it. You know what all your tables are, what the datatypes of all the columns are, and what kinds of data are in the tables: you don't have to guess at any of that.
Describe what you're doing. Think about it: how do we know that
SELECT NULL
FROM dual;doesn't do what you want?
Post CREATE TABLE and INSERT statements for a little sample data.
Post the results that this query is supposed to produce from those results. (Is it producing the right output now? Then it should be easy to post the correct results.)
Describe, as well as you can, how the present query is doing it.
Format your existing code, so it's easy to see what the different branches of the UNION are, and what the main clauses are in each one.
When posting formatted text (code or results) type these 6 characters
\(all small letters, inside curly brackets) before and after each formatted section, to keep this site from compressing the spaces.
Say what versions of Oracle (e.g. 10.2.0.3.0) and any other relevant software you are using.
I know it's a lot of work, but it really helps. You can do it as well (probably better) than anyone else, and if you're unwilling to do it, why should anyone else be willing? -
Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.
Erica,
I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
For the rest of us, please post when you find a solution.
Best.
BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others) -
I bought a composite AV cable with 30 pin connector at a proper apple store for my ipad 2 which no longer works now i have updated to ios7 - please advise how to make this work ?
I have the same problem.
Two similar discussions:
https://discussions.apple.com/message/23081658#23081658
https://discussions.apple.com/message/23281391#23281391
I have not yet seen any official response to the question: "Is the Apple AV Composite cable fully supported with 30pin connector devices upgraded with iOS7 - specifically ? - eg. iPad 2, iPhone 4, iPhone 4s"
If it is not currently supported is that then due to a bug / oversight and in that case is it something that will be fixed in the near future?
Please let us know what feedback you got from asking Apple support. -
the query below , i am using in valueset :
select * from AR_LOCATION_VALUES
Where ar_location_values.location_segment_qualifier =
'COUNTRY' and ar_location_values.location_structure_id in ( select location_structure_id from ar_system_parameters )
how to use this query to set in R12?
Thankshi
i am using the following query in 11i and i want to use the same in R12 :
SELECT ar_location_values.location_segment_description,ar_location_values.location_segment_value,location_segment_id
FROM AR_LOCATION_VALUES
WHERE ar_location_values.location_segment_qualifier = 'COUNTRY'
AND ar_location_values.location_structure_id IN
(SELECT location_structure_id FROM ar_system_parameters)
note: the table ar_location_values is obsolette in R12 so what is the replacement table in R12 for this? -
How to make this in Adobe Photoshop CS5? PLEASE Help!
Hey guys, i reallllllllly want to know how to make this image in adobe photoshop.... the cone around the forecast track. Can you guys please show me how to do this? Id greatly appreciate it!
There's a lot implied here, but you're not going to get around having to do the following in general:
Use an unmarked map as a background.
Draw shapes on layer(s) above the background and make them partially transparent.
Obviously the key is to draw shapes that express the "cone of uncertainty" exactly as you want it to look, and with a minimum of fuss.
I'd suggest drawing shapes with Path tools, then filling the shapes, applying a stroke (for the edge border), and using masking to hide parts you don't want to show (or which overlap with the other parts you're drawing).
Are you needing to do this over and over or just once?
-Noel -
How to make this effect in Keylight?
Hi, I have question, how to make this effect in Keylight?
I know that this overlay is added here:
http://oi57.tinypic.com/1174fup.jpg
Photos:
http://iv.pl/images/18475588964010299091.jpgKeylight what? All I see is some effect similar to Leave Color, a.k.a the Pleasantville effect that made the rounds 10 years ago. It may require additional masking and otehr effects, but definitely not something that is specifically related to Keylight...
Mylenium
Maybe you are looking for
-
Deisgn - Objects stop moving with arrow keys until a relaunch
In design mode, CR 2008, line objects and other design objects stop moving with the arrow keys and won't move more than one position until I either click on the object again and move it one position or I exit CR and relaunch that report. If I move a
-
Weird iTunes Problem with Podcast
I have been stumped on this for several months now. My Escape Adulthood podcast has been listed in iTunes for a while now. I have three done episodes. Unfortunately, anytime anyone tries to download or preview episode #2 or #3 from iTunes, all they g
-
Display results from dynamic query created and executed inside procedure
Hi; I have created this code: CREATE OR REPLACE PROCEDURE RunDynamicQuery(Var1 IN VARCHAR2, Var2 IN VARCHAR2, VAR3 IN VARCHAR2) AS -- Do something -- That ends up with a variable holding a query.... (just an example) MainQuery :='select sysdate from
-
Can't Updating ICS on Xperia Arc S
Hello, I'm looking for update my Xperia ArcS. I follow the instruction but after a few minutes to upload ICS on my PC, this message is send: "Error can not install or start the components update the phone software" I don't find any other answer only
-
I am trying to import pictures from Photoshop Elements 4 to Elements 12
I just got a new computer and am trying to move my pictures stored in Photoshop Elements 4 to the new Photoshop Elements 12, but am stuck on how to do this as seamlessly as possible. Can anyone assist?