How do obtain the number words typed in a Pages document?

I found it! To get the number of words in my Pages 5.1 document...I clicked on the paper-icon on the far left...(at the very left edge) it gave me a selection that ended with "count words." TaDa! Thanks

Similar Messages

How to obtain the number of words of a protected pdf file that can't be converted into a word file?

I need to get the number of words of pdf files. I usually convert them into word files to get the word count. Some pdf files are protected and can't be converted into word files. Is there another way to get the number of words of these protected pdf files? I use adobe professional XI Pro.

Scroll through and read the answers available in the thread below. You may find the information helpful.
Trying to write Javascript code to get word count
Be well...

How to Increase the Number of Rows/Lines in a document

Dear Experts,
I have pre printed stationary that prints only 5 rows before moving to the next page. How can I increase this to 10 lines or more ?
Regards

Hi Martin,
Which layout is this? Is it the Cheque For Payment? If it is, there is a setting to determine the max lines per page and even if you change the repetitive area setting it will still only print 5 lines.
The setting is in:
Administration / System Initialisation / Print Preferences.
On the Per Document tab, select Cheque For Payment. Change the Maximum Lines field.
If it is not Cheque For Payment, try Jimmys solution. The amount of rows though, is also dependant upon things such as the size of your page headers and footers and how much space is left after they have printed, so if you still can't get more lines per page, make those smaller.
Regards,
Adrian

How to set the number of records displayed at run time

Is it possible to set the number of records displayed block property at run time? The built-in 'GET_BLOCK_PROPERTY' can retrieve the number of RECORDS_DISPLAYED. But I can't find SET_BLOCK_PROPERTY to set this property. Is there anyway I can set this property programmatically? Thanks for any suggestions!

Bookmark Go to End
goal: How to vary the number of records displayed in a block
programmatically
fact: Oracle Forms Developer
fix:
Block property 'Number of Records Displayed' can not be changed during runtime
using SET_BLOCK_PROPERTY. However, it is still possible programmatically change
the visual appearance of the form so that it creates effect of changing this
property. To achieve such an effect follow these steps:
1. in Forms Builder, in the multirecord block define the new set of items.
The simplest way is to copy/paste the original item and rename created item.
2. set properties of these new items so that they are the same as the properties
of the original items. If these new items were copied from original items
then properties are already the same. Modify following properties
'Database item' on new items to value 'No'
'Synchronize with item' to the value of the original item
'Number of Items Displayed' to desired value.
'Visible' to 'No'
In other words, these new items are mirrors of original items.
3. code event, which is meant to trigger the change in block appearance.
This code should use SET_ITEM_PROPERTY built-in to set properties
like 'VISIBLE', 'ENABLED', 'NAVIGABLE', 'UPDATE_ALLOWED' and others
to desired value for items which are about to be displayed, then
move cursor to one of these just displayed items with GO_ITEM built-in
and then hide the previously displayed items.
Example:
Assume that the block is built on SCOTT.DEPT schema. Following will
change the set of displayed items
set_item_property('dept.mdeptno',visible,property_true);
set_item_property('dept.mdname',visible,property_true);
set_item_property('dept.mloc',visible,property_true);
set_item_property('dept.mdeptno',enabled,property_true);
set_item_property('dept.mdname',enabled,property_true);
set_item_property('dept.mloc',enabled,property_true);
set_item_property('dept.mdeptno',update_allowed,property_true);
set_item_property('dept.mdname',update_allowed,property_true);
set_item_property('dept.mloc',update_allowed,property_true);
set_item_property('dept.mdeptno',navigable,property_true);
set_item_property('dept.mdname',navigable,property_true);
set_item_property('dept.mloc',navigable,property_true);
go_item('dept.mdeptno');
set_item_property('dept.deptno',visible,property_false);
set_item_property('dept.dname',visible,property_false);
set_item_property('dept.loc',visible,property_false);
Regards,
Monica

How to limit the number of search results returned by oracle text

Hello All,
I am running an oracle text search which returned the following error to my java program.
ORA-20000: Oracle Text error:
DRG-51030: wildcard query expansion resulted in too many terms
#### ORA-29902: Fehler bei der AusfÃ¼hrung von Routine ODCIIndexStart()
ORA-20000: Oracle Text error:
DRG-51030: wildcard query expansion resulted in too many terms
java.sql.SQLException: ORA-29902: Fehler bei der AusfÃ¼hrung von Routine ODCIIndexStart()
ORA-20000: Oracle Text error:
DRG-51030: wildcard query expansion resulted in too many terms
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:169)
When i looked up the net, one suggestion that was given is to narrow the wildcard query, which i cannot in my search page. Hence I am left with the only alternative of limiting the number of results returned by oracle text search query.
Please let me know how to limit the number of search results returned by oracle text so that this error can be avoided.
Thanks in advance
krk

Hi,
If not set explicitly, the default value for WILDCARD_MAXTERMS is 5000. This is set as a wordlist preference. This means that if your wildcard query matches more than 5000 terms the message is returned. Exceeding that would give the user a lot to sift through.
My suggestion: trap the error and return a meaningful message to the user indicating that the search needs to be refined. Although it is possible to increase the number of terms before hitting maxterms (increase wildcard_maxterms preference value for your wordlist), 5000 records is generally too much for a user to deal with anyway. The search is not a good one since it is not restricting rows adequately. If it happens frequently, get the query log and see the terms that are being searched that generate this message. It may be necessary to add one or more words to a stoplist if they are too generic.
Example: The word mortgage might be a great search term for a local business directory. It might be a terrible search term for a national directory of mortgage lenders though (since 99% of them have the term in their name). In the case of the national directory, that term would be a candidate for inclusion in the stoplist.
Also remember that full terms do not need a wildcard. Search for "car %" is not necessary and will give you the error you mentioned. A search for "car" will yield the results you need even if it is only part of a bigger sentence because everything is based on the token. You may already know all of this, but without an example query I figured I'd mention it to be sure.
As for limiting the results - the best way to do that is to allow the user to limit the results through their query. This will ensure accurate and more meaningful results for them.
-Ron

How to count the number of calls that traversed the DB lookup node successfully

Hi All,
I need to obtain the number of calls that successfully traversed the DB lookup node.
Can you please let me know, what is the variable I need to add after the DB lookup node to capture the number of succesful calls.
Kindly help.

Hi Nirmala,
I hope you are looking for how many calls passed the DBLookupnode in script.
In DBLookup node you have a Right Branch and Wrong Branch.
1) After the right branch, set an unused peripheral variable and store the Value "Success"
2) For the wrong branch, set the same variable with the Value "Failure".
You can execute a query against the HDS and have the numbers.
Else you can setup a CallType as well before and after the node.
Regards,
Senthil

How to restrict the number of login attempts?

Hi,
Is there any "out of the box" solution to restrict the number of login attempts
in personalization server?
Thanks

why is it obvious he wants to restrict instances
of program, rather than instances in
it? it's not obvious, but it's what I think he meant
he asked "how to restrict the number of instances in
a program". it has the words "instances" and
"program" in it, but not the word "class". on face
value, yes, he's asking about instances within one
JVM. knowing a bit about how newbs minds work, I'm
reading between the lines and I reckon he meant
instances of his program. had he meant
"instances of classes" he'd have said so. "instances
in a program" sounds like somebody more experienced
talking, which if he was, he'd know how to do limit
either instances of classes or instances of
his program, and wouldn't be asking. I could be
totally wrong, but I don't think I am; that's what I
inferred from his post. only the OP knows for sureInteresting.
The OP also said "to any number". So you were guessing that this particular user wants to only permit, for example, five instances to be run on any one box at one time?

How to delete the number saved in CALL FORWARDING list?

how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
The image you have uploaded is unable to be displayed.
Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
It's advised you call your mobile service provider to further assist with this feature.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

How to find the number of data items in a file written with ArryToFile function?

I have written an array of number in 2 column groups to a file using the LabWindows/CVI function ArrayToFile...Now if I want to read the file with FileToArray Function then how do I know the number of items in the file. during the write time I know how many array items to write. but suppose I want the file to read at some later time then How to find the number of items in the file,So that I can read the exact number and present it. Thanks to all
If you are young work to Learn, not to earn.
Solved!
Go to Solution.

What about:
OpenFile ( your file );
cnt = 0;
while ((br = ReadLine ( ... )) != -2) {
if (br == -1) {
// I/O error: handle it!
break;
cnt++;
CloseFile ( ... );
There are some ways to improve performance of this code, but if you are not reading thousands of lines it's quite fast.
After this part you can dimension the array to pass to FileToArray... unless you want to read it yourself since you already have it open!
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of entries in a master data table

Hi Experts,
I am trying to find the entries in 0CUSTOMER master data.
BW>LISTCUBE>Data target: 0CUSTOMER and selected the fields that I need.
I would like to know how to find the "number of entrees". I tried to run the SUM for a count field, but it is taking forever as there are huge number of records .

Hi Dev,
Go to the change/display mode of the info object (0CUSTOMER) in your case. Go to the Master data/Text tab. Here you will find the master data tables according to your settings (P orQ or X or Y). Double click on the table name and it will take you to the SE11 display. From there, you can check the number of records as you do in any transparent table.
Hope this helps.
Thanks and Regards
Subray Hegde

How to find the number of links in a website

hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the reply

If you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps.

How to find the number of times method being called.....

hi,
can any one pls tell me how to find the number of times the method being called......herez the example....
Refrence ref = new Refrence();
for(int i = 0;i < arr.length; i++){
if(somecondition){
ref.getMethod();
here i want to know how many times the getMethod() is calling...Is there any method to do this.. i have seen StrackTraceElement class..but not sure about that....pls tell me the solution....

can any one pls tell me how to find the number of times the method being called......
herez the example.... http://www.catb.org/~esr/faqs/smart-questions.html#writewell
How To Ask Questions The Smart Way
Eric Steven Raymond
Rick Moen
Write in clear, grammatical, correctly-spelled language
We've found by experience that people who are careless and sloppy writers are usually also careless and sloppy at thinking and coding (often enough to bet on, anyway). Answering questions for careless and sloppy thinkers is not rewarding; we'd rather spend our time elsewhere.
So expressing your question clearly and well is important. If you can't be bothered to do that, we can't be bothered to pay attention. Spend the extra effort to polish your language. It doesn't have to be stiff or formal ? in fact, hacker culture values informal, slangy and humorous language used with precision. But it has to be precise; there has to be some indication that you're thinking and paying attention.
Spell, punctuate, and capitalize correctly. Don't confuse "its" with "it's", "loose" with "lose", or "discrete" with "discreet". Don't TYPE IN ALL CAPS; this is read as shouting and considered rude. (All-smalls is only slightly less annoying, as it's difficult to read. Alan Cox can get away with it, but you can't.)
More generally, if you write like a semi-literate b o o b you will very likely be ignored. So don't use instant-messaging shortcuts. Spelling "you" as "u" makes you look like a semi-literate b o o b to save two entire keystrokes.

How to find the number of fetched lines from select statement

Hi Experts,
Can you tell me how to find the number of fetched lines from select statements..
and one more thing is can you tell me how to check the written select statement or written statement is correct or not????
Thanks in advance
santosh

Hi,
Look for the system field SY_TABIX. That will contain the number of records which have been put into an internal table through a select statement.
For ex:
data: itab type mara occurs 0 with header line.
Select * from mara into table itab.
Write: Sy-tabix.
This will give you the number of entries that has been selected.
I am not sure what you mean by the second question. If you can let me know what you need then we might have a solution.
Hope this helps,
Sudhi
Message was edited by:
Sudhindra Chandrashekar

How to find the number of occurance of a string in text field of Infopath form?

Hi All,
In Infopath text field, How to find the number of occurrence of a particular string in that field?
Thanks in advance!

You can check to see if it contains a string once by using the contains function, but there isn't a very clean way to do what you want. If you wanted to guess at the maximum number of occurrences, then you could:
Box A has your initial. Set Box B to do a concat of string-before and string-after of Box A where it copies Box A minus the string we're looking for. Then we have Box C that does the same thing to Box B. Repeat as many times as you see necessary.
Example:
String: "1"
Box A - "123451234512345"
Box B - "23451234512345"
Box C - "2345234512345"
Box D - "234523452345"
etc.
We then have a field that has nested ifs looking backwards from Z -> A looking for a non-blank. Based on that, we return the number of occurrences. Again, this isn't clean, but it will work if you think there's a predefinable maximum.
Andy Wessendorf SharePoint Developer II | Rackspace [email protected]

How to find the number of users connected to database from OS level(Linux)

Hi All,
Could anyone know , how to find the number of users connected to database without connecting with sql*plus
is there any command to find it?
example we have 10 databases in one server, how to find the number of users connected to particular database without connecting to database(v$session)?
oracle version:- 10g,11g
Operating System:- OEL4/OEL5/AIX/Solaris
any help will be appreciated.
Thanks in advance.
Thank you.
Regards,
Rajesh.

Excellent.
Tested, works as long as you set the ORACLE_SID first ( to change databases )
ps -ef | grep $ORACLE_SID | grep "LOCAL=NO" | awk '{print $2}' | wc -l
Thanks!
select OSUSER
from V$SESSION
where AUDSID = SYS_CONTEXT('userenv','sessionid')
and rownum=1;Best Regards
mseberg

How do obtain the number words typed in a Pages document?

Similar Messages

Maybe you are looking for