How do super programs work ?

If anyone can enlighten me on how super programs work in the pet game . a fellow pet player messaged me saying they use these programs & have to pay for them every month . All I know is it gives players an advantage & I dont know anything else .

Hi JenniferQ Most of the so called programs are NOT programs they are scripts...that were created from Macrosnot the free add-on extension imacros. Macors can do just about anything in terms of automation. So they the experienced macro user creates what is really called a script. "Coding" but that is justcopy and paste from the run and the only change is the new pet or room you add You open the script and add the pet or cash room you are playing in. You can also add how manyhits you want to hit and how high in value you want to stop at. While it is running you can go havelunch lol...also you can add multiple pets or rooms and or add multiple profiles of yourself. This is not top secret information, many companies and gamers use macros to create automation toolsto work with or in this case play with...so the creator of these scripts have experience and knowlegde whereas we dont, you can easily learn to do it yourself I highly recommend one educates themselves on use of macros esp if you do office work which is whatI use it for as well as comes in handy if you use the web a lot..example I can create a script for all myaccounts all of emails I have to login in and it will do it automatically..in other words Macros can makeeverything repetitious hands-free.........the high end Macros cost around $300-600 USA but the free add- on extension imacros does a pretty damn good job and you can loop to play pets Now I did say most so called programs are just fancy Macros there is one that was programed by anexperienced programmer but still Macros does a similar job All it is; is automation with the speed set to FAST and FASTER. Period!!!

Similar Messages

How does this program work on a Mac OS-X 10.8.5?

How does Adobe Photoshop Elements and Adobe Premiere work on a MAC OS-X 10.8.5? Do I need additional software?

Hi,
The drivers for your device are available through Apple Software Update.
Follow the steps below to install and find out how to use it on your OS:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02911238&tmp_task=setupCategory&cc=us&dlc=en&lc...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How does this program work???

My Mac Powerbook G4 has GarageBand 3.0.4, which I have not yet used.
Now I want to create a file which has one track entered from an aifc file
(converted from Sibelius 4 with Wire Tap Pro). Once I have this as a GB
file, I want to overlay a second vocal track. Haven't a clue how to do this.
Help, help! James Johnson, Plattsburgh NY

Thanks very much for the nudge, and I'm beginning to get the feel of it.
One thing I don't quite "get" already: having created a real instrument track,
why is it necessary to select a sound? I selected basic male vocal of course --
haven't tried to record anything yet.
Also: if I have already installed the track which is my completely composed instrumental
of the song, why should I (or do I?) have to select a tempo and key? I am guessing that
I don't have to do that.
If you please, you can reply to me at [email protected] JJ

How does installing programs work when user folder moved to separate drive?

Hi everyone
I have my user folder on a separate drive from my boot drive.
I have set up a new installation of OS X on a third drive and pointed the main account's user folder on that third drive to the user folder drive.
This means that the dock that shows up when I boot off that third drive contains aliases linking to programs on the ordinary boot drive.
If I install programs on the third drive and make aliases in the dock, will that cause a conflict when I boot off the ordinary boot drive?
And if I remove from the dock aliases linking to the ordinary boot drive, will they then disappear when booted off the ordinary boot drive?
Thanks for any insight.
/p

I tried that.
1) I created a standard user account called "Test."
2) While logged in as Test I edited the sidebar. Then I logged out and back in again to confirm that the settings were retained. They were.
3) While logged in as Test I copied the user folder from SystemDisk/Users/Test to DataDisk/Users/Test.
4) I logged out of Test and logged in as Admin.
5) I changed the home directory for the Test account to /Volumes/DataDisk/Users/Test.
6) I deleted the directory at SystemDisk/Users/Test.
7) I logged out of Admin and logged in as Test.
8) I edited the sidebar. Then I logged out and back in again to see if the settings were retained. They were not.
9) I repeated steps 3-7, this time moving the home directory back to its original location at SystemDisk/Users/Test.
10) Again I edited the sidebar, logged out and logged back in again. This time the settings were retained, just as they had been before I moved the directory in the first place.
Since the functionality returns when I move the home directory back to the system disk, I've concluded that it is not due to any corruption of library files or such. It seems to be a problem with the location of home directory.
V.K., in your configuration, is the account with the moved home directory an Admin account or a Standard account? I have not tested this with an admin account and I suppose that might make a difference.

How the program work ???

hi everyont i am doubt about how the program work???
public class TestClone implements Cloneable{
     int count;
     TestClone next;
     public TestClone(int count){
          this.count=count;
          if(count>0)
          next=new TestClone(count-1);
     void add(){
     count++;
     if(next!=null) // how it can loop and
     next.count++; //execution next.count++ ??
     public String toString(){    // from the result the object execut the method automatic, but i think it isnot definite as static ,it cannot execut
          String s=String.valueOf(count)+"";
          if(next!=null) //the same question as about
          s+=next.toString();
          return s;
     public Object clone(){
          Object o=null;
          try{
               o=super.clone();
               }catch(Exception e)
               {System.out.println("cannot clone");}
               return o;
public static void main(String []args){
     TestClone c=new TestClone(5);
     System.out.println("c="+c);
//the result is 5 4 3 2 1 0
//c is object why it can print out
     TestClone cl=(TestClone)c.clone();
     System.out.println("c="+c);
     c.add();
     System.out.println("after added\nc="+c+"\ncl="+"cl");
//the result is 6 5 3 2 1 0 but where is 4 ??
// 5 4 3 2 1 0
     }     }

Is this your code? What do you WANT it to do? What's the purpose?
Thanks!
-Zach

How do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the onli

how do you connect your photoshop elements on your computer to your account online? and how do you create a customized url? how does the gallery work and how do you access it? i have trouble signing in on my program from my computer to connect to the online photoshop, and I really want to create my own customized url and post photos to my gallery and share them with the world, family, and friends, but i need help because i can't figure how to do any of this, would really appreciate feedback and assistance, thanks, - claire conlon

To add to sig's reply, "calibrating" does not calibrate Lithiu-Ion batteries, it calibrates the charge reporting circuitry. If you look at the effect of deep discharging Lithium-Ion batteries in the data from the independent test group, Battery University, you will see that doing so shortens the life of the battery significantly. It looks like an optimum balance between use and life is at a discharge level of 50%.

How can I make my PowerPC/Windows programs work in Mac OS X Lion?

In a few months I will be buying a MacBook Pro and I have a lot of old games that I would like to be able to play on it. But those games are Windows/PowerPC only and Mac OS X Lion does not support PowerPC. How can I make my old programs work in Mac OS X Lion?

For porting Windows programs to Mac OS X, you can check out Wineskin. It can be very simple to very hard to do though... its all a case by case basis. The older the game is the more likely you are to get it to work easily though.

Everytime I try to open a creative cloud product, the program closes. I need to use both illustrator and indesign for school and I was wondering if anyone had any advice on how to actually make the program work?

If anyone has any advice on how to make creative cloud programs work please let me know!
Any help is appreciated.

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

How to Change Maintenance Work Order Report in EAM Maintenance Super User

Hi,
We like to change or create new costom report in place of Standrd EAM Maintenance work order details report in Maintenance super User Responsibility.
When we go Maintenance Super User > Work Order > Print work order >Layout , In Template layout we find only one LOV called Maintenance report.
We like to where this this Template LOV storing and Run button code where it's storing
THANKS,
Gana

Hi,
You could temporarly adjust the CUNI definition for TST so that it can be converted to seconds. Adjust the notifications to set a valid unit of measure.
The alternative would be to update the field MAUEH in table QMIH with a valid breakdown unit of measure.
-Paul

How to retain the work item in inbox of user if user press the icon cancel?

HI,
we are using a text editor in approval section of workflow where the user needs to enter the reason for apporval or rejection.
the requirement is how to retain the work item in inbox of user if user press the icon cancel? there are two icons in editor,one is ok(tick marg) and cancel(cross mark).
so when user dont enter any text in the editor and press on cancel icon,then approval/rejection should not authorize and work item will remain in the user's inbox .unless and untill he enters the text.
i have tried LEAVE TO TRANSACTION 'SBWP'.leave program etc but nothing is working.
please guide me.
thanks
prsahu

Hi,
Go with Sangvir Singh suggestion.
It also looks neater from a Business Process Modeling perspective. You continue the process flow only when a change has occurred.
Kind regards, Rob Dielemans

Server requires authentication - How do I program for this?

Hello,
I'm testing out a webpage I have created that will be used to send email. I have DSL service...just recently subscribed. Previously I had Dial up. The server at that time didn't require authentication, but now that I have DSL it does. I'm a bit lost as to how to update my program (I've included the snippet in the post), so that it will run correctly. I am having some difficulty.
My program looked like this :
String POP3 = "pop.windstream.net";
String SMTP = "smtp.windstream.net";
// Specify the SMTP host
Properties props = new Properties();
props.put(POP3, SMTP);
// Create a mail session
Session ssn = Session.getInstance(props, null);
ssn.setDebug(true);
//...html to make up the body of the message
// set the from information
InternetAddress from = new InternetAddress(emailaddress, fromName);
// Set the to information
InternetAddress to = new InternetAddress(EmailAddress2, toName);
// Create the message
Message msg = new MimeMessage(ssn);
msg.setFrom(from);
msg.addRecipient(Message.RecipientType.TO, to);
msg.setSubject(emailsubject);
msg.setContent(body, "text/html");
Transport.send(msg);
//....                        I did some research already, and have looked at some other forum posts. The one thing I have noted when I run my program is that the dos prompt for tomcat is showing this:
*DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smpt,com.sun.mail.smtp.SMTPTransport,Sun Microsystem, Inc]*
DEBUG SMTP: useEhlo true, useAuth false
DEBUG: SMTPTransport trying to connect to hose "localhost", port 25
My ISP provider, Windstream, assures me that port 25 is NOT blocked. Also, I've noticed that useAuth is set to false, whereas the posts I have been looking at say true. It would make sense to me for it to be set to true in my case, since my server requires authentication. But how do I do that?
I found this bit of information from another person's post :
props.setProperty("mail.smtp.auth", "true");
you also need an Authenticator like this
Authenticator auth = new Authenticator() {
private PasswordAuthentication pwdAuth = new PasswordAuthentication("myaccount", "mypassword");
protected PasswordAuthentication getPasswordAuthentication() {
pwdAuth;
Session session = Session.getDefaultInstance(props, auth);*
Post located at http://forums.sun.com/thread.jspa?forumID=43&threadID=537461
From the FAQ section of JavaMail
Q: When I try to send a message I get an error like SMTPSendFailedException: 530, Address requires authentication.
A: You need to authenticate to your SMTP server. The package javadocs for the com.sun.mail.smtp package describe several methods to do this. The easiest is often to replace the call Transport.send(msg); with
String protocol = "smtp";
props.put("mail." + protocol + ".auth", "true");
Transport t = session.getTransport(protocol);
try {
t.connect(username, password);
t.sendMessage(msg, msg.getAllRecipients());
} finally {
t.close();
You'll have to supply the appropriate username and password needed by your mail server. Note that you can change the protocol to "smtps" to make a secure connection over SSL.
One thing I have noticed in the majority of the posts is that useAuth in the tomcat dos prompt should be set to true, and not false. Mine is coming up as false. Also, I think it should be set to true because the ISP's server requires authentication for sending and receiving email.
Can you please provide me with some input on how to update my program so it will run?
Thank you in advance:)

Thank you for replying.
Per your advice, I made these changes to my code:
Properties props = new Properties();
props.setProperty("mail.smtp.auth", "true");
props.put("mail.pop3.host", POP3);
props.put("mail.smtp.host", SMTP);
Session ssn = Session.getInstance(props, null); The props.setProperty("mail.smtp.auth","true"); is something I found previously to posting my question. I'm assuming this is the line of code that has changed useAuth from false to true...is that correct?
I'm most pleased to report that with the changes made above, my program works! But is my code good? As soon as I start taking on clients, I will need my code to be reliable, and it needs to work with Dial Up and DSL connections.
With regards to your question about how I had found the authentication code but hadn't used it. Well, I did try it, again, this was previous to posting my question, and the compiler couldn't compile the program because of this statement - pwdAuth;
I also tried this code I had found in the JavaMail FAQ section -
String protocol = "smtp";
props.put("mail." + protocol + ".auth", "true");
Transport t = session.getTransport(protocol);
try {
t.connect(username, password);
t.sendMessage(msg, msg.getAllRecipients());
} finally {
t.close();
}But according to the compiler, t.connect(username,password); was not an available method. I checked the documentation and found that to be true. Do you have any suggestions? Looking into the documentation I find that there are 3 methods called connect that are inherited by the Transport class from javax.mail.Service.
connect()
connect(java.lang.String host, int port, java.lang.String user, java.lang.String password)
connect(java.lang.String host, java.lang.String user, java.lang.String password)
I would opt to try the third connect method, but what would I put for host?
Thank you for helping me with this issue, I'm not an expert on using the JavaMail package, at least not yet, and I appreciate the help you have provided.

How does SAPscript 'WRITE_FORM' works ?

Hi
I have a Z program working fine, it is a SAPM07DR copy and i aggregated some fields to WASCHEIN form.
But i see when the program (standard or copy) calls the write form, the field values in program have other values (just the previous values) than the values wich appears in the printed form.
For example:
WASCHEIN KOPF Window has the WERKS value:
         Plant:    &*T001W-WERKS&
But when the write form is called
          CALL FUNCTION 'WRITE_FORM'
            EXPORTING ELEMENT = 'KOPF'
            WINDOW            = 'KOPF'.
In the program the *T001W-WERKS field has a different value that the value wich appears in the spool, debugging i see that the field has the prevoius value in the program:
Program
*T001W-WERKS
(when Write Form).............Spool
    '     '...................................Plant: 0900
    '0900'.............................Plant: 0901
I had to do the same logic in my new aggregated fields, but i realy don't know why does the program works in this way.
Why the print program and sapscript function works in this way ?
How does WRITE-FORM works, that is where the function take from the values to print ?
Thanks
Frank

Hi Max
I hope the program works like you said, but it works:
old_werks = '   '
T001W-WERKS = '0900'.
*T001W-WERKS = T001W-WERKS .
*T001W-WERKS = old_werks.    <-- '   '
CALL FUNCTION 'WRITE_FORM'
(form KOPF with *T001W-WERKS)
old_werks = '0900'
T001W-WERKS = '0901'.
*T001W-WERKS = T001W-WERKS .
*T001W-WERKS = old_werks.    <-- '0900'
CALL FUNCTION 'WRITE_FORM'
(form with *T001W-WERKS)
But the FM prints 0900 and after 0901, when the *T001W-WERKS values were '    ' and '0900'   !!!
(and with the *T001W-NAME1 field occurs in the same way)
Why does the FM prints that values ??
Thanks
Frank

How does this program group and cluster these button values into an array?

In the attached program, there are 6 buttons in a cluster and 1 individual button. These buttons control a bunch of different relays to control power to different components of a single device. Right now the program works in that I can control the 6 buttons, the LED turns on in the board and the power is being transmitted. What I do not understand is how it is doing this. I ran the program with the highlight execution on and at the start of the read from array component, if say I pressed button 6 and hit ok, it reads #6, where did these get defined and labled? and if i wanted to add another button/relay how do i do this? If someone could explain step by step how this is grouping the relays on the board into an array and then controling them I would really appreciate it. Thanks.
Solved!
Go to Solution.
Attachments:
Cluster to Array.vi ‏85 KB

The #6 your seeing is the number of elements in the array not a value for the array.
Now for some deeper explainations. From the code it appears that exactly 1 of 6 valves may be used and an additional valve may be in one of two possible states.
When the program is run the cluster of buttons is initiallized to all False. and we enter the outer while loop where a sequence structure starts. In the first frame of the sequence we initiallize a shift register to hold the current value of "Buttons." and this loop runs unthrottled (Add a wait for next ms multiple to this loop to prevent using 100% of the CPU!)
For each iteration the buttons are read and if a change has occured to any value buttons that were previously True are reset to False to prevent opening more than one valve.
When the user presses OK or stop- the current "Buttons" value is passed to the next frame. This frame convertsthe 7 boolean values to a integer where each valve is controlled by a seperate bit of the integer (Isolation is bit 6 and bits 0-5 each control a mixing valve)
Now I'd strongly recommend reworking the DAQmx calls- it is pointless to initiallize the task each time you want to use it- Create the task in the initialzation case and wait until the user exits to destroy the task. And well a sequence structures are frowned on- (there are better ways to do this)
As far as adding a relay- right now the relays are associated to the hardware by their index position in the cluster (element 1 = bit 0 etc....) to add a new valve you would need to decide what bit you would use to drive it and code in that bits' value to write a 0 in that bit. (hint the 40 constant is realy 0x40 right-click>visable items>show radix )
Let me know if you need further elaboration
Jeff

OCI - Sample program works on Windows but gives error in Solaris ??

Hi,
I am new to OCI. I was trying the following sample program:
#include<iostream>
#include<conio.h>
#include<firstheader.h>
//#include<stdafx.h>
#include<string.h>
using namespace std;
class OCIClass
public:
     OCIClass()
int p_bvi;
char p_sli[20];
int rc;
char errbuf[100];
int errcode;
const char *s;
printf("Hello\n");
string sql;
string sql2="select substr(ename,1,3) from emp where job='ANALYST'";
cout<<sql2;
//char sql[512];
int flag=0;
sql += "SELECT * from emp where job='";
if (flag==0)
sql += "MANAGER";
else
sql += "ANALYST";
sql += "'";
cout<<sql + "\n";
s=sql.c_str();
char* cstr = new char[sql.size()+1];
strcpy (cstr, sql.c_str());
char* cstr2 = new char[sql2.size()+1];
strcpy (cstr2, sql2.c_str());
sql=" ";
/* Initialize evironment */
rc=OCIEnvCreate((OCIEnv **)&p_env,(ub4)OCI_DEFAULT ,(void *)0, (void * (*)(void *, size_t))0,
(void * (*)(void *, void *, size_t))0,(void (*)(void *, void *))0,(size_t)0, (void **)0);
/* Initialize handles */
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_err, OCI_HTYPE_ERROR,
(size_t) 0, (dvoid **) 0);
printf("Error handle allocated\n");
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_svc, OCI_HTYPE_SVCCTX,
(size_t) 0, (dvoid **) 0);
printf("service handle allocated\n");
printf("Value of RC before Logon\n %d", rc);
/* Connect to database server */
rc = OCILogon(p_env, p_err, &p_svc, (OraText *)"scott", 5,(OraText *) "welcome", 7,(OraText *) "", 0);
printf("Value of RC after Logon\n %d", rc);
if (rc != 0) {
OCIErrorGet((dvoid *)p_err, (ub4) 1, (text *) NULL, &errcode, (OraText *)errbuf, (ub4) sizeof(errbuf), OCI_HTYPE_ERROR);
printf("Error - %s\n",errbuf);
     printf("error");
//exit(8);
     getch();
printf("Connect successful\n");
/* Allocate and prepare SQL statement */
rc = OCIHandleAlloc( (dvoid *) p_env, (dvoid **) &p_sql,
OCI_HTYPE_STMT, (size_t) 0, (dvoid **) 0);
rc = OCIStmtPrepare(p_sql, p_err, (OraText*) cstr,
(ub4) 37, (ub4) OCI_NTV_SYNTAX, (ub4) OCI_DEFAULT);
/* Bind the values for the bind variables
p_bvi = 10; /* Use DEPTNO=10
rc = OCIBindByName(p_sql, &p_bnd, p_err, (text *) ":x",
-1, (dvoid *) &p_bvi, sizeof(int), SQLT_INT, (dvoid *) 0,
(ub2 *) 0, (ub2 *) 0, (ub4) 0, (ub4 *) 0, OCI_DEFAULT);*/
/* Define the select list items */
rc = OCIDefineByPos(p_sql, &p_dfn, p_err, 1, (dvoid *) &p_sli,
(sword) 20, SQLT_STR, (dvoid *) 0, (ub2 *)0,
(ub2 *)0, OCI_DEFAULT);
/* Execute the SQL statment */
rc = OCIStmtExecute(p_svc, p_sql, p_err, (ub4) 1, (ub4) 0,
(CONST OCISnapshot *) NULL, (OCISnapshot *) NULL, OCI_DEFAULT);
while (rc != OCI_NO_DATA) {             /* Fetch the remaining data */
printf("%s\n",p_sli);
rc = OCIStmtFetch(p_sql, p_err, 1, 0, 0);
printf("After fetch\n");
rc = OCILogoff(p_svc, p_err); /* Disconnect */
rc = OCIHandleFree((dvoid *) p_sql, OCI_HTYPE_STMT); /* Free handles */
rc = OCIHandleFree((dvoid *) p_svc, OCI_HTYPE_SVCCTX);
rc = OCIHandleFree((dvoid *) p_err, OCI_HTYPE_ERROR);
void main()
OCIClass c1;
getch();
The above program works on my Windows desktop. If I try this in Solaris, OCILogon fails and gives an error. If I check the value of rc, I find that it is -2. I can connect to the database using SQLPlus, but not through the program. Not sure how to debug this...
Any pointers ?
Thanks in advance,
mrk

Did you make the required port entry in the /etc/services file? You will need to add the gateway service port there. Then try to run your program.
T00th

In ALV reports how double click event works?

in ALV reports how double click event works? Explain in detail.....

hi,
last lines is used for clicking
*& Report Z_SWAS_FUNCTIONAL
report z_swas_functional.
tables: qmel,viqmel,iloa,afko.
-- global data declerations--
data: ok_code like sy-ucomm,
      gt_itab type table of zfunctional,
      t_output type table of zfunctional,
      g_container type scrfname value 'CUSTOM_CONTROL',
      grid1 type ref to cl_gui_alv_grid,
      g_custom_container type ref to cl_gui_custom_container,
      e_row type lvc_s_row,
      e_column type lvc_s_col,
      es_row_no type lvc_s_roid.
*CLASS DECLARATION
class z_functional definition.
public section.
class-methods : handle_double_click
                for event double_click of cl_gui_alv_grid
                     importing e_row e_column.
endclass.
*CLASS IMPLEMENTATION
class z_functional implementation.
method handle_double_click.
       perform handle_double_click using e_row e_column es_row_no.
endmethod.
endclass.
*CODE FOR SELECTION SCREEN
selection-screen begin of block 84433 with frame title text-t01.
parameters : n_number like viqmel-qmnum,
                n_type like qmel-qmart,
                f_loca like iloa-tplnr,
                name like qmel-qmnam.
selection-screen end of block 84433.
                    screen validation event                          *
at selection-screen on n_number.
select single *
    from viqmel
      where qmnum eq n_number.
if sy-subrc ne 0.
MESSAGE 'NOTIFICATION NUMBER DOESNOT EXIST' TYPE 'E'.
endif.
select qmart from qmel into qmel where qmart eq N_TYPE.
endselect.
if sy-subrc ne 0.
MESSAGE 'NOTIFICATION TYPE DOES NOT EXIST' TYPE 'E'.
endif.
*START OF SELECTION EVENT
start-of-selection.
    perform fetchdata.
end-of-selection.
*Call screen event
call screen 100.
*PERFORM DISPLAY.
*&      Form FETCHDATA
      text
--> p1        text
<-- p2        text
form fetchdata .
*SELECT VIQMEL~QMNUM VIQMEL~QMTXT VIQMEL~QMDAT VIQMEL~LTRMN VIQMEL~PRIOK
      VIQMELBEZDT VIQMELAUFNR VIQMELTPLNR AFKOGLTRP into corresponding fields of table GT_ITAB
         FROM VIQMEL INNER JOIN AFKO ON VIQMELAUFNR = AFKOAUFNR
               WHERE VIQMELQMNUM IN N_NUMBER and VIQMELQMART IN N_TYPE AND VIQMEL~QMNAM IN NAME.
call function 'ZSWAS_TEST'
exporting
    qmnum         = n_number
   qmart         = n_type
   tplnr         = f_loca
   qmnam         = name
tables
    output        = gt_itab
if sy-subrc ne 0.
   message e000(z84433_msg_class).
endif.
endform.                    " FETCHDATA
*&      Module STATUS_0100 OUTPUT
      text
module status_0100 output.
set pf-status 'MAIN'.
SET TITLEBAR 'xxx'.
*creating custom container and grid instance
if g_custom_container is initial.
    create object g_custom_container
           exporting container_name = g_container.
    create object grid1
           exporting i_parent = g_custom_container.
    call method grid1->set_table_for_first_display
      exporting
        i_structure_name = 'ZFUNCTIONAL'
      changing
        it_outtab        = gt_itab.
*set handler events
    set handler z_functional=>handle_double_click for grid1.
endif.
endmodule.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
      text
module user_command_0100 input.
case ok_code.
   when 'EXIT'.
    perform exit_program.
endcase.
clear ok_code.
endmodule.                 " USER_COMMAND_0100 INPUT
*&      Form EXIT_PROGRAM
      text
--> p1        text
<-- p2        text
form exit_program .
leave program.
endform.                    " EXIT_PROGRAM
*&      Form handle_double_click
      text
     -->P_E_ROW text
     -->P_E_COLUMN text
     -->P_ES_ROW_NO text
form handle_double_click using   e_row type lvc_s_row
                                  e_column type lvc_s_col
                                  es_row_no type lvc_s_roid.
data: t_output type zfunctional.
    read table gt_itab into t_output index e_row-index .
if sy-subrc = 0 and e_column-fieldname eq 'QMNUM'.
    set parameter id 'K01' field t_output-qmnum.
    call transaction 'ZSMART' and skip first screen .
endif.
endform.                    " handle_double_click
regards,
swaroop.

How do super programs work ?

Similar Messages

Maybe you are looking for