How do the Message mapping below issue

Hi all.
I am doing interface is Siebel to SAP Customer Creation and Update. While mapping source side Siebel pass the Customer Account Group are Sold to Party, Goods Recipient, Payer and Bill to Party based on these parameters .My Target side we want like Z001, Z002, Z003 and Z004.
1) If Source side Customer Account Group is Sold to Party then my target side is Z001.
2) If Source side Customer Account Group is Goods Recipient then my target side is Z002
3) If Source side Customer Account Group is Payer then my target side is Z003
4) If Source side Customer Account Group is Bill to Party then my target side is Z004
So each time source Siebel send one Customer Account Group based on that we want target side as Z001, Z002, Z003, and Z004. So pls help to me how do this issue on message mapping or user defined function (UTF)
please help me out .....
Regards,
Ramesh

the best way to do it will be via value mapping
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/frameset.htm
in this case in future any change comes only your value mapping table needs to be altered unlike editing your UDF.
Also ref: https://www.sdn.sap.com/irj/sdn/developerareas/xi?rid=/webcontent/uuid/a680445e-0501-0010-1c94-a8c4a60619f8 [original link is broken]
to get value mapping on SDN TV.

Similar Messages

How to use the variables used in the message mapping

Hi ,
In the message mapping we can declare variables in the JAVA section , these variables could be used across the mapping .
I have tried using it but I am unable to retrieve the values assigned to the variables in one UDF into the another UDF .
Please guide me how to use the variables declared in the JAVA section in the message mapping .
Thanks
Anita Yadav

Anita,
I have worked on the Global variables and i found no issues. Make sure that the variable is declared in the Declaration Section and then initlaized in the Initialization section.
If you declare a variable in the Declaration Section ,
int i;
then in any udf you can use if directly. No need to re declare the variable in the UDF. If you do this, then it becomes a local variable.
Regards,
Bhavesh

How to get the java code of the message mapping

how to get the java code of the message mapping,
I mean to ask how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi Satya,
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.
Thanks,
Rajeev Gupta
Message was edited by:
RAJEEV GUPTA

How to view the java code of the message mapping,

Hi Experts,
how to view the java code of the message mapping,
how to get the background java code of the message mapping(graphical mapping).
And where to view it?

Hi sowmya,
Open any Message mapping in IR. Press CtrlShift0(zero) to open a new menu.
There you will find an option "Is Java Source Code Available?"
There will be an export button nearby. Use it to get the code.
Open it in a zip , you will see the hide java code.
The JAVA code for graphical msg mapping is in below folder:
\usr\sap\<SID>\<DVEBMGS10>\j2ee\cluster\server0\temp\classpath_resolver
Here all the mapping jars are there in this folder.
Just decompile these jars and you can see the code.

Create IDoc from flat file - How to do the message mapping

Hi everybody,
I want to create an IDoc from a flat file.
The file structure looks like this:
MT_XYZ
- Node001       0...1
- Leaf001
- Node002       0...unbounded
   - Node003    0...1
      - Leaf002
      - Leaf003
   - Node004    0...1
      - Leaf004
   - Node005    0...1
      - Leaf005
I have created a mapping and all the other stuff to set up the IDoc adapter.
Now when I try to test the interface the IDoc is created properly but obviously no information from the nodes "Node003" to "Node005" is inserted in the IDoc. Only the information kept in the elements (leafs) of "Node001" are inserted.
All IDoc segments and their "Segment" elements are linked to the root node of the file structure "MT_XYZ". I tried to link some IDoc segments only to "Node002" but then this segment is not created.
So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
Thanks in advance for all answers!
Regards,
Torben
Edited by: Torben Hönemann on Dec 14, 2009 4:26 AM

Hi Torben,
>>I want to create an IDoc from a flat file.
So you are using File content Conversion on the sender side. Right?
>>no information from the nodes "Node003" to "Node005" is inserted in the IDoc.
Are these information available in the source XML (you can check in transaction SXMB_MONI-> Input Payload).. There is a limitation in File Content Conversion of File adapter and it is that I can make an XML structure of 3 level.. Since these nodes details are in level 4 and 5 they should be missing in Source XML structure itself (after content conversion of File adapter). check that
>>So how can I set up the message mapping in a way that the information from "Node003" to "Node005" is transported to the IDoc? Can anyone help me here?
So you need to take an alternate approach where you do File Content Conversion and make 3 level structure.. then using a mapping convert this three level structure to your 5 level one and then try to map with the idoc.
Check this blog for an idea
http://www.riyaz.net/blog/xipi-file-content-conversion-for-complex-structures/
http://www.riyaz.net/blog/xipi-convert-flat-file-to-deeply-nested-xml-structures-using-only-graphical-mapping/
Regards
Suraj

How to Edit the message mapping in Quality server

Hi Experts,
Can you plz tell me, is there any way to edit the message mapping in QUALITY system?

Hi,
>>>>Can you plz tell me, is there any way to edit the message mapping in QUALITY system?
the correct one:
- correct on DEV
- export/import
and it's edited on quality
if you edit on qulity by changing the SWCV to editable then remember to
do the change in DEV later and export import and solve the version conflict on quality
as if you forget to do this someone will have to solve in the future and will not know why....
Regards,
Michal Krawczyk

Unable to save the message mapping

Hi..
I have completed the Message Mapping. when i am trying to save the Message Mapping i am getting the Error while executing save "The length 0 of the array ' Sorted Function keys' is not equal to the number of 1 functions".
can you pls suggest me, how can i rectify this type of strange error.
Regards,
Prasad

Hi,
that means that one of your Sorted Functions does not have correct input
as the error says
you probably placed it in a wrong way - check the functions
desciption on help.sap.com or an example on SDN blogs
and correct it - then it will work
Regards,
Michal Krawczyk

CcBPM Process Number in the Message mapping

Hi,
I have a requirement to map the ccBPM's process number in which the Mapping error has occured to be mapped to a specific field in the target. I wanted to know how could I pass the BPM's process number to the message mapping ( this message mapping(Service mapping) is a part of the same BPM). If we could get the MESSAGE_ID of the message in the message mapping, we should also be getting the BPM Process number.
In other words, when an alert is triggered in BPM, we get the BPM process number in its subject, i need that BPM process number in to the message mapping where that message has to be stored in a table in ECC.
I have searched in help and SDN to check if some system properties can help, but i couldnt. Any help/inputs from you is highly appreciated.
Regards,
Kalpana.

Hi Manuel,
it is very easy to to get the Message ID, which is unique and useful for selecting a message in the monitoring
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm">Special Access to Mapping Runtime Constants</a>
You send a mail from Java Mapping or, what would be the standard, (as additional) message from BPM or just as normal Message Receiver or only in Error case as Alert receiver.
Regards,
Udo

Get the target system time in the message mapping

Hi there,
I need to use the system time of target R/3 system in the message mapping. Any ideas how can I handle this?
Thanks,
Igor.

Thanks for your quick replies.
XI and R/3 system is in the same timezone but this is not relevant. I know it might sound strange but there is a reason I need to use time in the message mapping which is 2 minutes later than in the target system:
e.g. target system time: 16:58:32 I need to use 16:56:32 value in the mapping.
I found RFC MSS_GET_SY_DATE_TIME which can proide me with the value, just wondering if there is no other way how to do that other than RFC lookup ...
Thanks,
Igor

Download (documentation) the Message Mapping to client

Hi Gurus,
is there any possibility to download the Message Mapping i have done in the PI to my local pc? I need this to document how i realized my mapping.
I would be glad about tips and hints.
Regards
Udo

HI,
I think you are looking for this..
/people/daniel.graversen/blog/2009/03/16/pi-mapping-diff-tool
/people/daniel.graversen/blog/2008/12/29/the-easy-pi-message-mapping-documentation-service
Regards,
Sarvesh

How to "get" message mapping from XI scenario

Hi guys!
Is there a way, how to export message mapping description in some way from PI? In XI 3.0 it was possible, but what about PI 7.0? Hope you understand me:)
We need it to save this mm description as documentation.
Thanx a lot!
Olian

Hey Oilan,
with the message mapping open, hold ctrl + shift and right-click in the data-flow editor (the part of the screen where the function boxes and links go).
a different menu will pop-up. just follow "export tools, export" or something like that. It is pretty straightforward.
It will save the mapping in a .mte (or something like that) extension file. It is nothing but an XML. Good thing is that you can also import this .mte file in another message mapping (of course, with same source and target messages, or it won't be able to reference the links).
Regards,
Henrique.

Problem by transporting the message mapping from PI 7.0 to PI 7.1

Hi Everyone,
by transporting the message mapping from PI 7.0 to PI 7.1 i have got the following problem.
"Source code has syntax error:
K:\usr\sap\E71\DVEBMGS00\j2ee\cluster\serve......
package udfpool does not exist
import udfpool.*;
i have used a UDF in my message mapping.
This UDF calls for a method of a java class, which is imported as a .jar file with this message mapping.
this message mapping works very well on PI 7.0,
but doesn't work any more on PI 7.1 because of the problem described above.
anyone can help me out of this problem?
thanks!
zc

hi,
but did you import the jar archive to 7.1 first?
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ

How to enable message mapping tools in design integration buldier?

Hi,
The message mapping tools like 'Map selected fields and substructures if names are identical', 'Clear mapping', 'Data flow editor', 'Text Preview', 'Dependencies', etc are not enabled in our PI. The version of PI is PI_BASIS 2005_1_700 and the java version installed on PI server is 1.4.2. Is it something to do with compatibility or options to be enabled in some settings? Please help.
Regards,
Priyanka S

Hi Priyanka,
Uninstall Java 1.4.2 and try to reinstall again it should work.
Regards,
Naveen

When and how does the message context get removed from the message when we use pass thru send port

Friends,
i have a doubt regarding message context.
Assume i have used XMLRecieve pipeline in the receive side to receive the message so that the message context is created. I.e properties are promoted/written.
now if we use pass thru transmit pipe line at send side, how and when does the message context get removed from the message?? Since pass thru does not have any stages/components, how does the message context removed and sent out a pure message to destination???
i mean what exactly happens here to remove the context??
Ravindar

Thanks for the reply.
"The Context is created by the Adapter, regardless of any Pipeline or Pipeline Component. It has nothing to do with PassThrough vs. XmlReceive, although XmlReceive will write Promoted Properties to the existing Context,
as can any other Component."
yeah yeah, adapter does create some properties in context. You are right, i am aware of it. I just missed to explain it clearly. what i meant is addition of context properties will not happen if pass thru used. Thanks its clear.
"No. The Context already exists on the Message when it comes from the MessageBox and
is equally available to any Component in any Stage. The Context that hits the Pipeline is whatever was last Persisted, either by a Receive Port or Orchestration. It is not created by the XmlAssembler (XmlTransmit)"
You are right , the context already exists on the message while it leaves the receive port, and once it persists
to message box the context and message context gets stored in messages in relative tables.
Now as you said the components get the message from the last persistence, assume i have a send port(with passthru)
subscriber and a orchestration subsrciber for this message.
Orchestration gets the message with context right!!
if the send sendport(with passthru) also gets message along with context, then where is this context removed/demoted
while sending it out?. i guess as per SAAkhlaq said,
here sendport(with passthru) should get a pure message without context as passthru used.
or is it that ultimately send adapter removes the context completely?
or is it something like biztalk run time load the context from database into cache and both orchestration and send port gets pure message, and if needed they use context from cache???
sorry i may be troubling you, but i am confused. i hope i am not creating any nuisance with this
post.
Ravindar

Does the message mapping editor insure that a valid target message is co

Hi Friends
Does the message mapping editor insure that a valid target message is constructed?
Regards
Sam

Samuel,
Message mapping editor ,will generate the output as per your logic. Hence you need to validate and check whether the target message has been created correctly.
If you say," I'm perfect with the logic, I created the mapping I checked the target strcuture, its perfect, always the data will be populated correctly?" If the above is your question, then the answer is YES.
raj.

How do the Message mapping below issue

Similar Messages

Maybe you are looking for