How do transfer your own DVDs to ipad

How do you transfer your own DVDs to iPad

presuming you mean home made dvd's, not commercial dvd's....Handbrake is a great program to convert file types. You then sync those via iTunes to your device.
If it's commercial dvd's, you're on your own because no one here can help you break the encryption on those.

Similar Messages

  • How to transfer music from laptop to ipad

    I have music in my laptop in itune folder.How do I transfer music from itune in laptop to itune in ipad2.

    If you have iTunes installed on the computer, you have to make sure it is the current version.
    Just run iTunes and go to "File > Check for Update" to check whether your iTunes is the latest one. Then, use USB cable to connect iPad with computer as well.
    After iTunes recognize your iTunes, just hit "iPad" tab under the "DEVICE" section of the iTunes sidebar. On the right screen, you can see a new window to list you all categories of iPad. Just hit "Music" tab. Check the box next to "Sync Music" and click the circle next to "Entire music library" or "Selected playlists, artists and genres." Click the boxes next to specific artists, playlists and genres if you want to sync specific music to your iPad.
    Now, you may press the "Apply" button in the bottom-right corner of the main iTunes screen, followed by "Sync" in the same area to transfer the music to your iPad.
    For more related articles you can see these: "How to transfer files from Computer to iPad 2" and "How to transfer music files from Mac to iPad"

  • How to transfer music from laptop to ipad 4

    how to transfer music from laptop to ipad 4

    Install the latest version of iTunes on your computer.
    Start iTunes on your computer. Go to the view menu and select View > Show Sidebar.
    Connect your iPad to your computer.
    Select your iPad in the left column.
    Select Music in the right side of iTunes.
    Then make selections to either select all music or select the playlists you want on your iPad.
    Then click on Apply or Sync in the lower right corner of iTunes.

  • How to transfer movie from laptop to ipad

    how to transfer movie from laptop to ipad??

    Connect the iPad to your computer and select it on the left-hand side of your computer's iTunes, and then use the Movies tab on the right-hand side of iTunes to select and sync your film the iPad's Videos app. If it says that it isn't compatible with the iPad then try doing Advanced > Create iPad Version and then try syncing that version over.

  • How to transfer files from mac to ipad without using itunes

    how to transfer files from mac to ipad without using itunes ???
    as i want to use my ipad for official use as well...please suggest..

    well to be 100% technical, no you didn't but that aside, it good to know there are ways for people to transfer music into the default apps without iTunes, if they have a need.
    I tend to use 3rd party apps for documents, like your mentioned iExplorer etc, which are handy.
    I see from a search the two "apps" you mentioned are not iOS apps, which I had assumed, SyncPod and FreeSync are apps for your computer, that would explain their access to the default Music/Video apps.
    I had wondered how Apple had allowed iOS apps in the store that could get around the sandboxing in iOS of apps.
    Message was edited by: CGW3

  • How to transfer photo from pc to iPad?

    How to transfer hoot from pc to iPad?

    You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import.
     Cheers, Tom

  • How to transfer photos from pc to ipad air?

    How to transfer photos from pc to ipad air?

    Connect your iPad to your computer with iTunes open.  Once the iPad is recognized on the left side, click it once.  Click the Photo tab and choose what pictures you want to sync to your iPad.  Once you've made your selection, click Apply in the lower right hand corner.

  • How to transfer my iBooks from one ipad to other?

    How to transfer my iBooks from one ipad to other?

    Purchased iBooks can be redownloaded on all devices. If they are not from the iBookstore, connect your iPad to computer and 'transfer purchases'. They should now be transferred to iTunes (or iBooks if you are using Mavericks). You can then sync using the other iPad.

  • HT201302 how to transfer video from computer to ipad

    How to transfer video from computer to ipad?

    Does the video meet the format requirements?
    Pad2, the new iPad Supported Video Formats & Movie Formats
    H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
    Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format
    Another way. You can use a USB flash drive & the camera connection kit.
    Plug the USB flash drive into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
    Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
    Secrets of the iPad Camera Connection Kit
    http://howto.cnet.com/8301-11310_39-57401068-285/secrets-of-the-ipad-camera-conn ection-kit/
     Cheers, Tom

  • HT201269 how to transfer music from iphone to ipad

    How to transfer music from iphone to ipad

    To transfer photos, music, contacts and apps from one iPhone to iPad:
    1. Connect two device to PC.
    2. Choose the category list of iPhone that you need to export files
    3. Check the files that need to export in the Content Panel and click "Transfer file(s) from device to device" button
    4. All the checked files from your iPhone can be transferred to iPad.
    And there are two articles about transferring files from iPhone to iPad:
    How to transfer contect from iPhone to iPad
    How to transfer music/photo files from iPhone to iPhone

  • How to transfer music from iphone to ipad

    how to transfer music from iphone to ipad

    If it's iTunes purchases (or if you have iTunes Match) then you might be able to re-download them via the Purchased tab in the iTunes store app on your iPad. Otherwise you will need to sync your music via your computer's iTunes, you can't connect an iPhone to an iPad for direct transfer

  • HT1386 I have had to reformat my hard drive. I have installed windows 7 and want to know how to transfer the songs on my iPad back to the newly installed iTunes on my compute?

    have had to reformat my hard drive. I have installed windows 7 and want to know how to transfer the songs on my iPad back to the newly installed iTunes on my compute?

    Copy all the content on your iPod back to your PC and into iTunes. Then go ahead and sync the iPod with your new library.
    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • How To Use Your Own Router with Out Loosing Verizon's FIOS Services

    How to use your own router with Verizon’s FIOS Service
    First, you need a basic understanding of how FIOS works but unfortunately there are two types of FIOS systems out there. All of the systems utilize a fiber optic cable to bring TV, phone and internet to your location over one optic cable. In addition these systems provide interactivity including widgets, remote DVR, movies on demand and so forth via an IP (Internet Protocol) signal.  Your STB (Set Tip Box) requires both a video and IP signal. The IP signal is necessary for all of the aforementioned interactivity.  The fiber cable terminates at the Optical Network Terminal or ONT for short.  The ONT converts the optics into a digital signal that can be utilized by ones equipment.  From the ONT your video, phone and internet are provided to the location.  This is where things can differ as the internet signal can be provided via a coaxial (MoCA or Multimedia over Coax Alliance) or RJ45 Cat5 (Ethernet) cable.  It is important to identify and understand the differences of these two setups.  In my case I have my internet entering via Ethernet cable, which in my humble opinion makes things a heck of a lot easier.
    How does one tell the difference? In most cases it’s rather simple; just look at the Verizon’s router WAN (Wide Area Network) Port.  Does it have a RJ45 (Ethernet) or Coax (TV cable Cord) going to it? If the router’s WAN port doesn’t have a coaxial connector then one will need to convert the MoCA signal into a usable Ethernet signal that routers understand. The easiest way is to use Verizon’s router as a bridge. In this method the Verizon’s router simply converts the signal and passes it along to your own router. The challenge is to try to maintain the interactivity that FIOS TV provides. Because of this one needs to supply the IP routed signal back to the FIOS router.  There are multiple methods for doing this and I would recommend investigates which one make the most sense.   
    In my particular case the IP signal was provided by Ethernet.  Again there are various ways of installing one’s own router. The hardest is to utilize Verizon’s router as a bridge.  This setup requires configuring Verizon’s router as a bridge and also creating a VLAN (Virtual Local Area Networks). In addition one needs to set up their own router so it will work with the various routing tables and networks. For me this is too complex for the average person and it can be difficult to trouble shoot if something goes wrong. Please consider that Verizon will not support utilizing third party routers.   
    The easier method is to request an Ethernet signal (if you don’t already have one) from their ONT.  I would highly recommend getting your hands on a NIM or Network Interface Module. This device is used to convert Ethernet to Coaxial so it can be fed back to your STBs.  These can be purchased online and Verizon technicians can be a valuable resource with these sorts of acquisition.  At the very least they can point you to the right direction.  Once you have a NIM the rest is rather simple.
    Log into the current Verizon Router.
    Located the router’s MAC address and copy it down.
    Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.
    Look at your current device list, typically found on the home screen. Copy down your STB MAC and IP address.
    Example:
    IP-STB1
    Connection Type: Ethernet
    * IP Address: 192.168.1.100
    IP Address Allocation: DHCP
    *MAC Address:                07:73:fFe:ad:8b:3f
    * Things you will need to write down
    Go to the network section and look for the main Ethernet connection.  Select this and then select more setting, typically found at the bottom. Release the current lease.
    Remove the Verizon router
    Install your router
    Connect the NIM by plugging in an Ethernet from one of the routers LAN (Local Area Network) ports to your NIM. Then connect the coax cable, the same cable that was used by Verizon router.
    Set you DHCP routing IP pool to accommodate Verizon’s STB IP’s  (note their IP’s start at 192.168.1.100)
    Go to DHCP section and reserve the STB IP’s by inserting the IP’s and MAC addresses. This shall ensure that nothing else utilizes the same IPs as the STBs thereby preventing IP address conflict.  
    Add the port forwards from Step 5 above.
    Clone Verizon’s Mac Address utilizing the info from step 2
    Finish setting up the router in typical fashion.
    Unplug and re-plugin your STB’s and test functionality.  It’s best to try using a widget or Movie on demand function.
    Note: if the new router can net get an internet signal contact Verizon’s support and have them release the IP and reset the ONT.  
    EVERYTHING should be working at this point.

     3 Go to the port forwarding section and copy down the Applied Rules. 
    Example:  
    Network Computer/Device: 192.168.1.100:63145
    Application & Ports Forward:  Application UDP Any -> 6347  
    Note: There may be up to three entries for each one of your Set Top Boxes.G
    Your display obviously is not like mine as mine does not dosplay the port associated with the ip address
    whatever, the STB's start at 192.168.1.100 and icement by 1 for each
    the port addr's will be 63145 alo incrementing by 1
    there is 1 entry for each in my pf list
    however each ip addr also has a port entry starting at 35000 also incrementing by 1 for each ip addr
    For some unknow reason these are duplicated e.g I appear to have 11 entries exaactly the same for each stb and as the fios services rules have no action switc there is nowhere to delete the extraneous garbage.
    Why do you clone the mac addr??

  • How to transfer an app to another iPad via a PC?

      Hi, iPad gurus!
      I've been asked for help by an acquaintance of mine. iPads are unfamiliar to me. I'm not even friends with sync of iPhone apps installed on my MacBook Pro.
      Actually, I've got two questions.
      Question 1:
      Is it possible to download iPad apps with the help of a non-Apple computer (Sony Vaio)?
      I mean, to be able to enter the store for iPad applications, then to send the app to an iPad somehow.
      The reason why I want to use a non Mac gadget is that I think that it's more convenient to work with apps or with any data at anything larger than iPads, while at home. Moreover, imho, the device should be the largest available in the house. The acquaintance has a MacBook Air. But he's also got an access to a large Sony monitor with a full size large keyboard.
      Question 2.
      Now, there are two iPads  (I'll give them the names: iPad #1 and iPad #2). The task is to install on one iPad (iPad #2) all the same apps that have already been installed on another iPad. I mean to synchronize, cutting the full path which has been passed by iPad #1  (that is, without the process of looking up for each separate app somewhere in the Internet or iTunes). When I was asked for help, I was unable to offer anything except to manually install on iPad #2 the same app, that had been on iPad #1. And you know, what I can't explain was that while I was busy installing Viber, another freshly installed app from iPad #1 appeared on iPad #2 without my efforts (Russian Yandex Navigator).  
      So, how do I arrange the sync?

    Do both iPads use the same Apple ID?
    How to Transfer Everything from an Old iPad to New iPad
    http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
     Cheers, Tom

  • HT204291 how to transfer files between 5C and ipad

    how to transfer files between 5C and ipad data

    iCloud: http://www.apple.com/icloud/features/
    or using a computer, iTunes: http://support.apple.com/kb/ht1296

Maybe you are looking for