How do u connect iPad to iPhone services

How do I connect to iPhone on iPad!?

Go to Settings > Personal Hotspot on the phone and turn on. You will be given a password to connect to that new network.
Now on the iPad, go to Settings > Wi-Fi and connect to the new network using the password on the iPhone.
If you don't get the Personal Hotspot option on the phone, your carrier doesn't support it.
Also, when you finish using it, make sure to turn it off on the phone, otherwise it will drain your battery quicker.
A

Similar Messages

How to make your iPad and iPhone commicate with each other

How to make your iPad and iPhone commicate with each other

this is very easy...
firstly disconnect the DSL modem for the linksys..
then connect the computer to the linksys router (port 1/2/3/4)..
then access the linksys setup UI
open ur web browser
site: http://192.198.1.1/
username: [blank]
password: admin
now hook up the westell modem.. and goto the status page ...
check Internet IP.
if then Internet IP is 192.168.1.* then,
disconnect the westell from the router and goto the setup page.
change the LOCAL IP address to 192.168.2.1 (notice the 2.1 and not 1.1)
save settings....
connect the westell and viola ur online...
if the Internet IP is 0.0.0.0 then
goto the setup page and change the 'Internet connection Type' to 'PPPoE'
once done the page changes and give u a place to enter a username and a password.. this username and password is given by verizon..
sud be something like '[email protected]'
once done save settings...
goto the status page and hit connect... give it a few moments... u shud get a Internet ip address... if u get one ur online if not then power cycle the entire network. and try check to see if u get an ip..
hope this helps...
cheers..
Life is short... So get movin !!!
DopeLorD

How can i connect ipad mini wifi celluar to 2g internet plan, how can i connect ipad mini wifi celluar to 2g internet plan

How can i connect ipad mini wifi+celluar to 2g internet plan

Hello Sir!
After weeks of testing, i found the solution of my question. It´s quiet simply!!
1º iPhone (3G Internet acess) connected to Mac mini by USB or BlueTooth or WiFi.
2ª in Mac mini must be activated in "Preferencias", "Compartir", the option "Compartir Internet",
     "Compartir Conexión desde":   iPhone USB or Bluetooth PAN
     "Con otros Ordenadores vía": Ethernet
3º Ethernet cable must be connected from Mac mini to Time Capsule !!
4º In Time Capsule "Internet": connect by: DHCP
                             "Network": bridged
Nothing more!!! Sooooo simply!!
After this, Windows XP SP3 connect without problem over TC´s WiFi or Ethernet to the Internet!
Also other Devices like IPad, or other iPhone, etc.
Of course it can be a created a WiFi connection (PPP) between the iPhone and the Mac
and it´s working to.
But ALWAYS, by changing the connection mode, must be changed the Thethering mode.
In- and Out-Going!
Thank you for your help, no I made me a "small" TC expert...lol

How do I connect ipad 3 to Hawking 300N range extender

how do I connect ipad 3 to Hawking 300N range extender

there are tons
http://www.amazon.com/Extrasensory-Devices-ESDHW011-Headphone-Microphone/dp/B006 T65CXE
more
iphone mic and headphone splitter
the input is the mono mic input part the other is stereo out

How do I sync iPad and iPhone on iCloud?

How do I sync iPad and iPhone on iCloud?

missysouthernbelle wrote:
I'm trying to figure out why I have to download them again. Why when I downloaded music to the iphone, the ipad didn't receive the music also automatically?
Because they are two separate devices.

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

How do you connect ipad to Samsung 6000 smart tv

How do you connect ipad to Samsung 6000 smart tv

You may need a Samsung app.
Samsung SmartView
https://itunes.apple.com/us/app/samsung-smartview/id359580639?mt=8
Samsung TV Media Player HD
https://itunes.apple.com/us/app/samsung-tv-media-player-hd/id514993136?mt=8
 Cheers, Tom

How i can connect ipad with ipad mini via bluetooth

how i can connect ipad with ipad mini via bluetooth?

for what purpos?
this is what bluetooth profiles ios devices support out of the box
http://support.apple.com/kb/HT3647?viewlocale=en_US&locale=en_US
but there maybe more features supported by apps from app store as a bluetooth profiles such as PAN give the client server possiblities

How do I link iPad to iPhone?

How do i link iPad to iPhone.?

AirDrop (applicable for certain model only)
http://support.apple.com/kb/ht5887

ITunes crashes when connecting iPad or iPhone

iTunes crashes when i connect iPad or iPhone. Running OSX 10.9.3 and the most up to date iTunes version?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

How do I connect ipad 2 to wired connections in hotels?

How do I connect ipad 2 to wired internet connections in hotels?

You need some sort of travel router for WiFi connection. I don't use one, but the Apple Airport Express can be packed into a suitcase and used as a portable router. It has to be set up with a computer first, but after that, you can travel with it and use it for a wireless connection. There are others available as well.

How do i start ipad mobile device services?

Just connected my Ipad 2 to an HP laptop running Windows 7 Ultimate and getting error msg saying This Ipad cannot be used because Ipad Mobile Service is not started. How do I start it. Have not had this problem before I upgraded to IOS 6.
Thanks, Bob

I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows

Problem Connecting iPad or iPhone to Wifi (Linksys E1000)

I recently moved from my parent's house to a condo and I am having trouble connecting my iPad or iPhone to my WiFi. I have not problem with my main desktop (connected to the router via ethernet), but my iPad and iPhone fails to connect to the network. I don't have a problem finding the network (FunnyWillow) but when I try to log in, it says "Failed to join "FunnyWillow" - "Unable to join the network "FunnyWillow" ". How do I resolve this problem?
Solved!
Go to Solution.

Alright, my current firmware version is (v1.0.01 build 7Apr 15, 2010). I tried to update it by downloading version 2.1, but when IZArc opened, there was nothing in the .bin to extract. I checked my status afterwards on (http://192.168.1.1/Status_Router.asp) and it still says I am using the v.1.0.01... version.
I reset the router, and network and tried to update the firmware and the samething happened with the update. I tried to connect my iPhone/pad and the same error message appeared. I have a good feeling that getting that firmware update would solve it, I guess U don't know how to go about it.

How do I connect to Google Search Service

Hello,
I'm a newbie to flash, let alone to flash builder 4.6. I'm able to connect to a Data Service like a RSS feed and bind that to a data grid. I can't figure out how to consume Google Web Service like the search functionality. DO you have any tutorials or samples for this?
Thanks
Mark D

If you have unboxed the Chromecast and set it up using the link found inside the packaging, you should be good to go.
Assuming the Chromecast and your iPhone are on the same network, you will see the 'Cast" button withing certain video apps you may already use. Not ALL apps utilize this function, and the only ones that come to mind right now are YouTube and Netflix. Google is allowing developers to add this to their apps now too.
Its worth noting that Chromecast DOES NOT work in the same way that AirPlay does and will work ONLY with apps that have the Chromecast function built in.

How can I set iPad and iPhone with IOS6 to do not remember wifi and proxy credential

My company want to implement the Password Policy to limit the failure logon count.
Such as Lock users if they try logon with invalid password for 3 times.
The problem occur on iPad and iPhone my iPad using IOS6. and user had change their password.
iPad and iPhone remember the Wifi and proxy credential. and try to connect with the saved credential.
I monitor on my system and found Wifi connection try 2 times with saved credential and prompt for new password
When I enter the corrected new password . So I the proxy server detected the invalid login 3 times or more and lock those account.
So could anyone told me on how to set iPad and iPhone to do not save the user credential... ?
Thanks very much
Weerayut

Enable Airplane mode, then turn on WiFi

How do u connect iPad to iPhone services

Similar Messages

Maybe you are looking for