How do u creat BIOS recovery disk + nvidia firewall question.

WooooHOoOOO....
after re-formating a dozen times, busted SCSI config, messed up driver install, I FINALLY GOT this board working at 100%!!!
This mobo powered through my entire DOOM 3 Odyssey to Hell NON-STOP without a SINGLE CRASH!! Definitely a good testament to this board's quality.
Now for the final few noob question, how do I create a bios recovery disk just in case things happened.
lastly... how do you properly setup the NV Firewall? After enabling it, none of the other computers in my network can see this computer with the MSI Board, so file and printer sharing all stops when the firewall is enabled.
Anyone here has a walkthrough on the firewall?
ONCE AGAIN...thanks to all who helped me!!!

i havent got my nvidia firewall to work imma wait until they release better drivers for it but for creating the bios recovery disk i think if u use msi's live update it will ask u if u want to create one or not.

Similar Messages

How do I create a recovery disk for MacBook Pro

I want to restore my MacBook Pro to it's factory setup

What didn't work?
Booting or restoring?
Cmd-R goes to the hard drive recovery partition.
Cmd-Opt-R goes to Internet Recovery and requires a WiFi network with WPA/WPA2 encryption (or an ethernet cable).
Are you using an external wireless keyboard?

Satellite L - How to create a recovery disk?

Hey,
I deinstalled the Programm "Recovery Disc Creator" accidentally. But the Folder with the Win Vista Recovery Disc Informations are still in my Computer. Now i want you to help me in creating a Recovery Disc. My System is very unstable. So i want to re install it. I hope you can help me.

Sorry but why did you uninstall the recovery disk creator?
However, now you can’t create the recovery disk because you have uninstalled the program for creating the disk.
The only way I know is you use the HDD recovery option to reinstall your notebook. You can use this if you go to the advanced boot menu (F8 before Windows is booting), choose repair my computer and then select the Toshiba HDD recovery function.
Normally you get this message if you start your notebook at the first time:
+Important INFORMATION+
+your system is equipped with hard disk recovery system. if you need to repair+
+your computer by restoring it to original factory state, you can do it directly+
+from harddisk (press F8 when you boot your computer, choose "Repair your computer"+
+and follow the menue instructions) or create a bootable Recovery Disc Medium for this purpose.+
+Toshiba recommends you to create Recovery Disc Medium using the "Toshiba Recovery Disc Creator" to ensure+
+hat you are able to restore your computer to the original factory installed state, even if your computer+
+gets seriously damaged+

How can I get a recovery disk for Satellite P300-1CI?

Hi everybody,
first, sorry for my english, I'm a belgian and I speak french.
Yesterday I bought a toshiba Satellite P300-1CI, when I started, I must installed Vista home.
I would like to format my disk and reinstall my old Windows XP.
My question is : How can keep an image disk with Vista? I don't have an installation disk of Vista and don't know my registration key of it.
How can I have a recovery disk ?
Can you help me please.
PS : Sorry for my english

Hi mate
User manual is really interesting document and in most cases it answer all you questions ;)
Anyway, the Toshiba recovery disk should be created before you would format and install on the HDD.
You have to use the preinstalled Toshiba Recovery Disk Creator application in order to create the Recovery DVD.
Now to you other question;
The Vista image which is preinstalled and placed on the Recovery disk (after recovery disk has been created) is activated already and you dont need to insert any keys or activate anything.
Greets

Can I create my recovery disk on 1 of my hd's,

Hello,,I just bought a HP ENVY Phoenix 810qe 245 Desktop Pc with win 8.1 it has 3 hard drives and I want to know if it possible to create my recovery disk on 1 of my hd's,,would there be any problems If I did it this way, if something happens to my main ssd drive I would be able to use harddisk f drive to restore back easy,since there would be other files on the hd f disk would the system find the files needed?,I guess I would just need to change the boot order in bios and then it should find what it needs right??And I love win 8.1 now,took few hours to learn but I think it blows away win 7 and xp by far..makes my ol xp system look dusty...
This question was solved.
View Solution.

Hi,
One of the restrictions with the Recovery Media Creator application is that it will only allow the Recovery files to be written to removable media - USB Flash Drive or DVDs. It does not support ( and will not recognise ) fixed drives whether internal or external.
An HP document regarding the creation of Recovery Media can be found on the following link.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03481733&lc=en&cc=us&dlc=en#N712
Note:
If you decide to create our Recovery Media on a USB Flash Drive, it must be of a type that Windows 8.1 sees as a 'Removable Disk' - not all do and there's no completely reliable method for telling which will work until they're plugged in. For example, in the image below, the usb flash drive Dave (G) shows as a 'fixed drive' and will not work, whereas the usb flash drive 'Removable Disk (H)' will work.
Thanks to @erico the following USB Flash Drives are known to work:
Transcend USB 3.0 16Gb - this may not be large enough in your case.
Team Group F108 64G
PNY Turbo 3.0 - 32GB
Lexar Jumpdrive M10 Secure 64GB USB 3.0
Patriot Rage 3.0 32GB
Best regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I create a recovery partition on an HP EliteBook 2760p using Windows 7 64-bit Professional

I have an HP EliteBook 2760p using Windows 7 - 64-bit Professional
My original problem is that I couldn't create the Repair Disc
I found out that the problem was with a file that was on the recovery partition
I backed up the recovery partition from the same make and model computer
I reformatted the partition and recovered the backup to the reformatted partition
It didn't work
How do I create the recovery partition I have the 2 disks that came with the tablet PC

If you do a factory restore using HP recovery discs it will put everything back including recovery partition. I don't know if any way to manually re-create the recovery partition.
NOTE: back up your files as Factory Restore wipes ALL data.

How do I create 2 Recovery partitions: one for Lion and one for Mountain Lion?

Well that is basically the question:
How do I create 2 recovery partitions: one for Lion and one for Mountain Lion?
Reason is that I would like to keep the option to return to Lion, or even better, have a seperate partition for eacht?

can I access my programs from the other partition, so I can save space ...
No, as far as I know, each one is completely separate - especially if you're dealing with two different versions of OS's.
is it possible to safely make an extra partion on a running drive (it is my main computer ...) The disk is large enough ...
how large would this have to be
I've personally never done it on a running drive - have read it's possible, but don't want to suggest it since I've never done it and wouldn't be sure about the steps. This is how I got to two partitions on my iMac:
Originally, I had just one partition with Snow Leopard. I used CCC to clone that to an external drive. Booted into that drive and used DU to partition and erase the internal. I then cloned the new clone back. Also cloned the same thing to the other partition which I then upgraded to Lion. So I had two OS's - SL and Lion. I've now decided to clone my SL to an external drive for occasional use and installed ML on that partition - so now I have Lion and ML.
There are two ways to get a "fresh" install: either download the OS again and install it on a partition of your choice or, as I've done as well, copy the installer to a safe place so you don't need to download it again. It does include whatever apps/software is included in the OS. I've designated two smaller partitions on externals as my "fresh" installs of both Lion and ML for emergency or reinstall purposes (this is my way of dealing with not having install DVDs) - I took the time to install it there and then slowly add fresh installs of my important apps (either via download or install CD) - don't bother with the little/less used stuff, a current copy of that can be downloaded if and when I need it. I don't really update those two - that can also be done if/when I need it since that'll always change.
So, yesterday, I decided I wanted to start fresh with ML - booted into my fresh install of Lion (on external), wiped the SL partition on my internal and installed Lion. Decided to download a fresh copy of the ML installer and installed that. Then ran Software Update. After that, repaired permissions. Then I methodically opened every third party app and checked for updates - installed those where necessary. After all that, I simply copied (drag 'n drop) my entire Documents folder (which contains all my important data,, photos, etc) over from another backup.
This took a while, but mostly because of the long download times; the installs weren't all that bad. I should be running a really clean system now, especially since nothing was ported over except my Documents folder.

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imac

How can I make a recovery disk for an imac 24 " early 2008 to April 2009 or connect via thunderbolt to another imacimac 24 " or connect via thunderbolt to another imac
ann

You will only know about the hard drive when you try to access it in TDM from your other computer. If you cannot boot into TDM mode or if the drive does not appear on the new computer's Desktop then it is likely bad.
What you are thinking about as a recovery disk is the Recovery HD normally created when you install Lion or later on the computer. You boot from it as follows:
Boot Using Command+R keys:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"COMMAND" and the "R" keys together.
3. Release the keys when the Utilities Menu appears.

How do I make a recovery disk for my Mac running 10.5.8?

How do I make a recovery disk for my Mac running 10.5.8?

Hi, if tryly a PowerMac, (PPC instead of Intel), you may need a Firewire Drive to be bootable, most PPC Macs cannot boot OSX from a USB drive.
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

HT3606 how do i get a recovery disk or download for os 10.5.8? my system was installed by an apple store when replacing my hard drive. i did not get a backup disk.

how do i get a recovery disk or download for os 10.5.8? my system was installed by an apple store when replacing my hard drive. i did not get a backup disk. macbook is a 1.1 from mid 2006 and 10.5.8 is as far as i can go.. use this as a utility backup when my new macbook pro with mt lion screws something up---which seems like a daily event. do i have to install a lesser version of leopard then install the update. does software update even work anymore for leopard? im so in the dark and when i look at the console i just freak.

Hello, your best bet would be to clone your drive to an external drive, which will be bootable.
Get carbon copy cloner to make an exact copy of your old HD to the New one...
http://www.bombich.com/software/ccc.html
Or SuperDuper...
http://www.shirt-pocket.com/SuperDuper/
You're not likely to see any updates show up for 10.5.x
The very first MacBook 1,1s can actually run 10.6, which is updatable to 10.6.8, but will only run in 32 bit mode on yours.
http://www.everymac.com/systems/apple/macbook/specs/macbook_1.83.html
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least, more if you can afford it)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57

Creating a recovery disk for windows 8

need to create a recovery disk for windows 8, on HP Pavilion g6-2238dx Notebook PC...getting error message because I unintentionally deleted part of the program... now it won't boot up... I get to a message that says...Windows restarted Unexpectedly or encountered an unexpected error. Windows install cannot proceed, click ok . When I do that the program restarts... it repeats the process over and over... Any Suggestions?
THank you

Try tapping away at the F11 key immediately after powering on the laptop to get into HP Recovery Manager which can be used to do a System Recovery back to Factory settings.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Dv6748us how to make a bios recovery usb

how to make a bios recovery usb?

Hi!
You can download new BIOS versions on the Toshiba website. Search for your model and select BIOS update
http://eu.computers.toshiba-europe.com
Download the right file and follow these instructions:
Extract the zip file containing the BIOS upgrade to a temporary folder.
Make sure that all open files are saved and all applications are closed.
Execute the extracted *.exe file in the temporary folder. Follow the instructions on the screen.
The BIOS update will be done automatically.
After a few minutes the Notebook will restart automatically.
Bye

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to i purchase a recovery disk for window 7

how to i purchase a recovery disk for window 7

Hi:
Please read this info on the link below for how to order recovery disks.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&lc=en&cc=us&dlc=en
Paul

How to recover using lion recovery disk assistant IN MAC MINI

how to recover using lion recovery disk assistant IF MY KEYBOARD AND MOUSE DOEST NOT WORK DURING BOOTING ?

Hello:
If my memory serves me correctly, the licence agreement that comes with a new system indicates that is good for one system....
Also, I do not think that something that would boot one type of processor would work on a different type.
Barry

How do u creat BIOS recovery disk + nvidia firewall question.

Similar Messages

Maybe you are looking for