How do u input the printer output into labview and display the data?

Hi, basically when a program has done running the program prints a page of data. basically i want labview to read this data from the parallel port of the pc, display it in labview or be able to pull the data apart and put it where i want. any ideas, be much appreciated.
thanks stuart

Basically, what you need is to access the pins of your PC�s parallel port
The function that you need is located at: �Advances/ Port I/O /inport� of your function palette.
You might want to read the following documents before programming. They will help you a lot (specially if you are using WIN2000 or later OS that has a kernel stucture, you need to download the and used inport.vi of AccessHW.zip for your program to work)!
Using the Parallel Port in LabVIEW
http://zone.ni.com/devzone/conceptd.nsf/webmain/72C6FC6CE4AD4D1386256B1800794596?opendocument
IEEE 1284 - Updating the PC Parallel Port
http://zone.ni.com/devzone/conceptd.nsf/webmain/0989D3D9DAFAE64E8625680400679736?opendocument
Port and Memory Utilities for Windows
http://sine.ni.com
/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3DEBD56A4E034080020E74861&p_node=DZ52058&p_submitted=&p_rank=&p_answer=&p_source=External
Best,
USCTROJAN

Similar Messages

How do I combine all my calendars into one and delete the others?

I have a work computer, a home desktop, and Apple air laptop and an 1phone 4s.
I use Outlook calendar for all my appointments and only need one calendar.
When I get notifications of my upcoming events on the Oulook page and on my iphone, I get multiple notifications, sometimes as many as 6 times.
How can I combine all my calendars into one and delete the others?

Your old account is the one you migrated, but it has been renamed because the new account had the same name. "Fixing" this is a bit complicated. It is possible to transfer data from one account to the other. See Transferring files from one User Account to another.
A cleaner solution is to do this:
Create a temporary new admin user account with a completely different username.
Log into this new account.
Delete the new account you created before migrating.
Delete the old account you migrated that has the changed name.
Re-migrate your old account from the Mini.
Log into the newly migrated account and delete the temporary account.
And, the simplest solution is to use the migrated account as-is and delete the account you originally made on the new computer.

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertical

I have iMovie 8.0.6 and an iPhone 4S. I took hours of videos on vacation (Australia and New Zealand) and want to make a movie. I've imported the first batch into iMovie and started the project. I just realized that I shot both horizontally and vertically and when I preview (on full-screen) what I've combined, first it's wide-screen, then it's tall, narrow with wide black sides.
The film looks choppy, no flow, since it alternates horizontally and vertically.
I can import the vertical clips two ways: "Full-Original Size", or "Large 960x540." But the vertical clips have very short, fat people.
This didn't happen with my Flip HD; the movies are smooth and terrific. My heart is breaking.....please, how can I make the videos match?

Yes, I'd like to use all the video I shot, put it together with music, titles, etc. and make it consistant. when it goes from full screen to this vertical, narrow clip, it's very awkward.....and it's so narrow, it's hard to see what I'm looking at; my eyes don't make the adjustment quickly.

Are there any shortcuts to connecting the printer with web services and/or the eprint server?

(HP Officejet Pro 8600 Plus, IE, Windows 7)
As I am unable to execute the instructions given by
by Ryamond 1411, I'm looking for other avenues to connect my printer to web services and/or
the eprint server so I can release 4 emails for printout now stuck in que.

Hello MurrayJ,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I stop firefox from checking add-ons and displaying the What's new page each time I launch it

Since upgrading to the latest version, I have viewed read and interacted with everything on the What's new page. I have done this a number of times but the page is still opened each time I launch Firefox. In addition it shows my homepage in a second tab.
Prior to opening Firefox it checks for add-ons.

hello Michells, this will likely be caused by the user.js file in your profile folder.
go to the firefox ''menu ≡ > help ? > troubleshooting information'', click on ''profile folder/show folder'' and close all firefox windows afterwards. a windows explorer window should open up - in there delete the file named '''user.js''' and restart the browser afterwards.
[[How to fix preferences that won't save]]

Is the raw output from JSP and XSQLServlet the same?

Hi
Is there is difference between the raw output from XSQLServlet and JSP? For example, assuming the same content is being generated, is there some additional header information emitted by XSQLServlet that is not done by JSP?
I am using software that successfully consumes generated content from a JSP OK, but the same content (using the same XML/XSL) generated from XSQLServlet is being rejected. I am puzzled by this. Maybe this is due to some differences in servlet output or an encoding issue? The content is not HTML but XML-like with an "application" contentType, like Steve's SVG example.
It seems that XSQLServlet is showing some data prior to emitting the actual content, i.e. HTTP version, responding server version, content type and date, e.g.
HTTP/1.0 200 OK^M
Server: Resin/2.0.5^M
Content-type: application/x-sky; charset=UTF-8^M
Date: Thu, 28 Mar 2002 06:45:34 GMT^M
^M
(then the generated content)
Is this preamble usually generated by a JSP also?
If not, can this information be turned off, or put another way, can XSQLServlet's raw output be set to be exactly like JSP? If not, is there a workaround?
I have tried setting the following XSQLConfig.xml
<suppress-mime-charset> for the mime-type &
<character-set-conversion>
<none/>
</character-set-conversion>
also, but to no avail.
Please help! I really want to use XSQLServlet!
Thanks.
Michael.

Yes, just less fine control over the process but the same engine.
Regards
TD

How can I import an Aperture Catalog into Lightroom and retain the RAW file as well as the files with the edits?

I have several catalogs in Aperture that I would like to import to Lightroom 5 and I want to retain the original RAW files as well as the files with the edits. How can I do this?

Well, you can bring in the raw file (without edits), and you can bring in a rendered RGB file (e.g. jpeg or tiff) with edits baked in, but what you CAN'T do is bring in a raw file, with the non-destructive Aperture edits, and have Lr translate those Aperture edits into Lightroom edits.
Put another way: no raw converter/editor can understand the edits of any other raw converter/editor. So, you have to work with a rendered version, and/or re-edit from scratch in a new raw converter/editor.
PS - it would be feasible to write a rough translator which approximated raw edits in one world into edits in another, but such does not exist yet for Aperture -> Lightroom, that I know of.

How do you make it print first page first and not the last page first?

I have a HP Officejet Pro 8600. How do I make the first page print first and not the last page printing first?

Hi,
From the application used to print open the print dialog and click Oroperties or Preferences to access the Printing Preferences screen.
From the Layout tab set Page Order as Back to Front, then the first page will be printed first.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

One day the screen turned into flakes and all the icons disappeared. i rebooted but a few icons apppeared only to disappear again into a mosaic like painting. how do i fix this?

One day the screen turned into snowflakes so i rebooted then the icons reappeared then became a mosaic like artwork so i rebooted and now my screen is blank. how do I fix this?

Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus

How to import a web service into labview and make the assembly strong named signed?

I have used the web services tool to import my .net project files. I am then putting them into clearcase. In order for my dll's to work on a network im getting the error that they need to strong named signed. Is there anyway of strong name signing them with in the web services tool, or modifying the dll's after they've been created? Thanks for any help!

dbell0971,
I appreciate your willilngness to help on this issue. However, it doesn't seem like we are on the same page here.
When you import a webservice it creates an assembly. That assembly is .NET. In general you cannot run an assembly on a shared drive unless it is "trusted". You can make the assembly trusted by adding some classes and properties to it (i.e. strong signing it)- http://msdn.microsoft.com/en-us/library/xc31ft41.aspx
However, since WE are not creating the assembly, LabVIEW is, then we don't have the source code so we can't just strong sign it.
The question is simple- Can the Import Web Service Utility strong sign the assembly it creates?
Thanks,
jigg
CTA, CLA
teststandhelp.com
~Will work for kudos and/or BBQ~

How to sample an analog signal, simulated on labview and get the sample values.

My project involves this particular detail where i have to sample a simulated sine wave and get the samples and compare them so as to select a particular length for hanning window.Then it also requires me to experiment with the window size so as to get more efficient data out of the sampled signals. please help me with the sampling part and guide me as to how to perform a hanning window operation on the sampled signal. I have directly used the spectral analysis tool which involves getting a FFT spectrum by a default hanning window setting. But since i have to experiment with the window size and variations, guide me with the sampling part and applying a separate hanning window. Thank you.

bhardoo wrote:
My project involves this particular detail where i have to sample a simulated sine wave and get the samples and compare them so as to select a particular length for hanning window.Then it also requires me to experiment with the window size so as to get more efficient data out of the sampled signals. please help me with the sampling part and guide me as to how to perform a hanning window operation on the sampled signal. I have directly used the spectral analysis tool which involves getting a FFT spectrum by a default hanning window setting. But since i have to experiment with the window size and variations, guide me with the sampling part and applying a separate hanning window. Thank you.
What do you mean by i have to sample a simulated sine wave?
the sine generator will provide you with a waveform (or an array of values you can use), there are basic vis to do all this, rigth click on the vi and select help to get detailed information.
Post your vi if you have trouble with details.
How much do you know about LabVIEW and signal theorie?
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Search the xml node by attributes and display the entire row

I am having a table with two columns say
school_name string type
student_notebookprice xmldata
how do i search with oracle query having student_id=102 and schoolname="abc_school" with notebook price 20, how do i get only one single row
abc_school,
<students>
     <student id="101">
     <notebookprice>12</notebookprice>
     </student>
     <student id="102">
          <notebookprice>20</notebookprice>
          <notebookprice>30</notebookprice>
          <notebookprice>40</notebookprice>
</student>
</students>
def_school,
<students>
     <student id="301">
     <notebookprice>10</notebookprice>
     </student>
     <student id="302">
          <notebookprice>15</notebookprice>
          <notebookprice>16</notebookprice>
</student>
</students>

yes . what i want based on search criteria i need to display that row . initially i have tried with the below query
SELECT school_name,
extractvalue(value(x), '//id') as student_id ,
extractValue(value(x), '//teacher') AS teacher
FROM school t ,
TABLE( XMLSequence( Extract(t.obj_xml, '/students/student[id=101 and teacher="abc"]'))) x
where existsNode(t.obj_xml, '/students/student[id=101 and teacher="abc"]') = 1
but when i want to add the second student in the search , i am failed to produce the second student information in the output and i can able to add it to where clause and but how to display the student info in the output . The xmltable option that u have specified looks good but what i fear is , it produce multiple combination with all the tags in the xml with the other columns in the table . will it cause any performence issue .
<students>
<student >
<id>101</id>
<teacher>abc</teacher>
</student>
<student >
<id>102</id>
<teacher>xyz</teacher>
<teacher>onp</teacher>
<teacher>rsm</teacher>
</student>
</students>
SELECT school_name,
extractvalue(value(x), '//id') as student_id ,
extractValue(value(x), '//teacher') AS teacher
FROM school t ,
TABLE( XMLSequence( Extract(t.obj_xml, '/students/student[id=101 and teacher="abc"]'))) x
where existsNode(t.obj_xml, '/students/student[id=101 and teacher="abc"]') = 1
and existsnode(t.obj_xml, '/students/student[id=102 and teacher="xyz"]') = 1

How to convert Oracle reports previewer output into delimited file.

How to convert Oracle reports previewer output into delimited file if the report has more than 1000 pages.
I tried with previewer option File --> Generate to file --> Delimited file, but the report engine is crashing.Not generating .TXT file.
I observed that this option is not working for more than 400 pages.
I am using Oracle reports 6i version.
Plz suggest me to generate .TXT file from Report previewer.

You can specify a delimiter (a character or string of characters) to separate the data (boilerplate or field objects) in your report output in either of the following ways:
On the command line using the DELIMITER keyword.
In the Delimited Output dialog box or DelimitedData Output dialog box (displayed with File > Generate to File > Delimited or File > Generate to File > DelimitedData) in Reports Builder.
for further information goto this link
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b13895/orbr_concepts2.htm#sthref760

Item text is not appearing in the print output through IDOC?

Hello ,
I am changing the PO through IDOC. When ever there is change in the quantity ,net price and delivery date the print out put is generated autoamtically and changes are appearing the print output.
when ever there is change in the item text of PO print output is not generatiing but item text is updated in the PO.
If i change manually print out is generating for item text also but through IDOC print output is not generated . please help to slove this isuue.
i am passing the value as :
    idoc_data-segnam = 'E1BPMEPOTEXT'.
    e1bpmepotext-po_item = Po line item number .
    e1bpmepotext-text_id = txtid.
    e1bpmepotext-text_form = textform.
    e1bpmepotext-text_line = line item text .
    idoc_data-sdata = e1bpmepotext.
    APPEND idoc_data.
    CLEAR idoc_data.
    CLEAR e1bpmepotext.
please help me it is urgent
Thanks
Venkatesh

Hi Venkatesh,
Check the condition record in transaction NACE. Whether the print output field is present in the condition record.
Regards,
Gajendra.

I removed my battery in an attempt to insert a SIM card, obviously without knowing how to insert the SIM card. I put the battery back into place and it was already charged 100%, but it's stuck in recovery mode. I've already restored it, but it won't boot.

I was trying to insert a SIM card into my iPhone 4 without actually knowing how to do so. I assumed that I was to remove the back of the phone and find a slot for it near the battery. I removed the battery in an attempt to find a SIM slot, and was obviously unsuccessful. I put the battery back into place and screwed the phone back plate back on. Note: the battery was fully charged and the iPhone was working perfectly fine before. After screwing the iPhone back into place properly, I thought, I attempted to cut the phone on and it would not do so. I put it back on the charger, and the screen came up that says "Connect to iTunes". I obviously couldn't do so if its plugged into the wall. I plugged into the computer, connected it to iTunes, went through the Recovery mode process, and it still won't turn on. The computer says that the iPhone is in Recovery mode, but iTunes can't do anything because it has already been restored. When I disconnect it from the computer, I hold all buttons in all possible combinations, but it won't turn on at all. When I plug it into the wall, it again says to connect to iTunes. I don't know if I damaged the battery or any part within the iPhone, but I was sensitive in my approach to removing the battery and putting it back in, and there is no visible damage whatsoever. I am extremely frustrated and in desperate need of Apple-Pro help.

do you have a cdma iphone 4? becauase cdma iphones dont have a sim card slot... the providers that use cdma technology here in the us would be verizion, sprint, criket, ect... if you want to use your iphone 4 on att or tmobile (gsm carriers). then you would need a gsm iphone 4 (has sim card slot). a gsm iphone 4 is different than a cdma iphone 4 (they have different radio chips). maby you missed the sim card slot? sim card slot would be on the side of the phone.. never inside (unless it has a removable back cover like the galaxy s3 or s4), if you dont see a sim card slot on the side of the phone than you have a cmda iphone 4. can you tell me what carrier you are trying to use?

How do u input the printer output into labview and display the data?

Similar Messages

Maybe you are looking for