How do u segrigate cross client req. and client specific req.?

How can I find out which one is Cross client transport and client specific transport req.?

Hi tjk
In SPRO, do the following:
Menu: Additional Information->Technical Data->Client Dependence
Then all IMG nodes will have the client specific/client independent information visible.
Also:
Normally, when you try to open an IMG node of cross-client, then system gives a warning message.
Best regards
Ramki

Similar Messages

  • How to get Client ID and Client Secret for Office App for Word which accessing SharePoint Online

    we currently implementing an Office App for MS Word which access SharePoint list and get data from lists. Our aim is any user can get this app from Office App store and enter their SharePoint URL and browse their own SharePoint lists and use those. When
    I was checking mechanisms which you used to access SharePoint, in some of them have used ClientId and Client Secret to authenticate with SharePoint. I have following questions.
    1.If I want to sell my app using Office app store where can I get those clientId and client secret which is used to  get the access tokens.
    2.Is it possible to create SharePoint app and publish it to SharePoint app store and get clientId and client secret and use it when accessing through office. So users first download our SharePoint app install it to their SharePoint environment then get out
    Office App from Office app store and add it to word. Will this work?

    Hi,
    >> We are planning to develop an Office app to access SharePoint Online and SharePoint on Premise from Microsoft word.
    I’m not very familiar with SharePoint development, so please correct me if I have any misunderstandings about your requirement.
    The basic components of an app for Office are an XML manifest file and the default webpage of your app (server side).
    >> If I'm publishing my Office App for Word in to the Microsoft office app store, how do I get the ClientId and ClientSecret which I need to pass to authenticate with SharePoint online?
    As far as I know, when register your web app to SharePoint Online, you will get the ClientId and ClientSecret from the Azure Active Directory. And you need to store the Client ID and Client
    Secret on the app server side.
    For details, you could reference the article
    Building an Office 365 ASP.NET MVC app.
    >> If ClientId and ClientSecret not providing when we publishing Word Office App to the app store how what the ways which we can use to authenticate with SharePoint using Word Office app?
    You don’t need to provide the ClientId and ClientSecret when publishing your App to App Store. They are stored on your app server side.
    By the way, if you have the question about how to access the SharePoint resource in a Web Application, I will suggest you posting the questions to
    SharePoint Development Forum. For this forum, we mainly discuss the questions about using the Office JavaScript API to develop Apps for Office.
    Regards,
    Jeffrey
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Client dependent and client independent in ALE

    I am going through pdf learning of an ALE scenario,i couldnot get wat is meant by client Independent and client dependent.
    How can i conclude
    Create message type (WE81){color:green} Client independent {color}
    To create a new message type, follow these next few steps:
    u2022 Enter transaction WE81 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Create logical message type)
    u2022 Choose Create logical message type by double clicking on it
    u2022 Click on change icon to enter change mode
    u2022 Click on New entries to add a new type
    u2022 Enter the required message type, in our case it is ZINVRV and an appropriate description
    u2022 Save and exit.
    Your message type has now been created. The next step will be to link it to the IDoc.
    2.2.1. Link message to IDoc type (WE82 & BD69) {color:green} Client independent {color}
    To link the message type to the IDoc type follow these next few steps:
    u2022 Enter transaction WE82 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> EDI: Message Types and Assignment to IDoc Types)
    u2022 Click on change icon to enter change mode
    u2022 Click on New entries to create the link
    u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
    u2022 Save and exit
    u2022 Enter transaction BD69 (ALE -> Extensions -> IDoc types -> Maintain message type for intermed. Structure -> Assign message type to IDoc for ALE)
    u2022 Click on change icon to enter change mode
    u2022 Click on New entries to create the link
    u2022 Enter the message type ZINVRV and the BasicIDoc type as ZINVRV01
    u2022 Save and exit
    Your IDoc is now linked to your message type. We still need to link object types and add the message to the model before we can use the message.
    2.2.2. Maintain object type for message type (BD59) Client independent
    The ALE objects are used to create links between IDocs and applications objects, to control the serialisation, to filter messages in the customer model and to use listings.
    For our own message type and IDoc you must maintain object types for the links.
    If you want to check the serialisation for the message type, then you must maintain object types for the serialisation. If no serialisation object has been maintained for a given message type, then the serialisation will not be checked for this message type.
    To add an object type to our message type, follow these next few steps:
    u2022 Enter transaction BD59 (ALE -> Extensions -> ALE object maintenance -> Maintain object types)
    DOC NAME: ALE_SCENARIO_DEVELOPMENT_PROCEDURE
    Version 1 Page 6 of 16
    ALE Scenario Development Guide
    u2022 Type in your message type ZINVRV and press enter
    u2022 Click on New entries
    u2022 Enter your object type, LIFNR (We need to use the vendor as a filter object), the segment name where LIFNR resides, Z1INVRV, a number 1 for the sequence followed by the actual field name LIFNR
    u2022 Save and exit.
    You have now created an object that weu2019ll use as a filter object in the customer model to direct the flow of messages to the various logical systems based on the vendors in the filter of the message type ZINVRV.
    We now need to add our new message type to the distribution model.
    2.3. Configuring the Distribution Model
    This task is performed on your ALE reference client.
    2.3.1. Manual Configuration (BD64) {color:green}  Client dependent {color}
    To manually configure the customer distribution model, read the ALE configuration procedure, and follow these steps:
    u2022 Perform the Maintain customer distribution model directly function. (ALE -> Distribution customer model -> Maintain customer distribution model directly)
    u2022 Specify the customer model you want to maintain and the logical system that is to be the sender of the messages OR create a new model. (Create model ALE with logical system ALELS1C400)
    u2022 Choose the receiving systems to which the sending system must forward message type ZINVRV to.
    u2022 For each receiving logical system allocate the message type necessary for communication to the receiving systems as per ALE configuration procedure.
    u2022 Create filter objects (in our case LIFNR as the object type with the associated vendor number, 0000018001 with leading zeros, in the object area) for the message types.
    u2022 Save the entries.
    Refer my query within color:green
    Edited by: aditya  sharma on Jul 14, 2010 12:57 PM
    Edited by: aditya  sharma on Jul 14, 2010 1:01 PM

    A client is an independent business unit within an R/3 System, Data in the R/3 are classified as cleint-Dependent and client-independent.
    Client-independent data such as ABAP Programs, R/3 repository objects throught the entire system. Other data is client-dependent. meaning, it can be viewed from one client. Cleint-dependent data includes customizing application and user data.
    Eg.
    Scripts are client dependent, means the changes done to SAP scripts in particular client will not be reflected in other client.
    Smartforms are client independent, means changes done in one client will be reflected in all the clients.
    Server : ECC6
    Client : 100 , 200 , 300 , 400
    Now suppose you have developed report in DV server client 100.
    Then you will be able to see that in all clients.
    Hence this is called as client independent. You can change anywhere and changes will be reflected to all ...
    Now suppose you have developed a script in DV client 100.
    You will not be able to see that in client 200 or 300 or 400 unless ytou copy that from client since it is client dependent.

  • What exactly is the diff between client dependant and client independant te

    Hi gurus,
    What is the diff between client independant and client dependant term.. I initially had a confusion related to client independant and client dependant Transport requests, where else are these words applicable, do they apply to data as well, if so how? any links to help me understand the difference..
    regards,
    kishore

    Hi Kishore,
    Client Independant: These objects are not specific to any client. And it is universal which can be viewed,changed across the clients.
    Client Dependant: These are the objects can be viewed, changed for the client for which it has been assigned. Other clients do not have access on these objects.
    In SAP, all objects are finally stored as tables. "Mandt" is key field which determines whether the object is client dependant or not.
    Client Independant transport requests will make the transported objects available across the clients. and Client dependent transport request make the objects available only for the client mentioned by field "Mandt"
    Regards,
    Dinesh D

  • What is the defferent between client copy and client transport

    what is the defferent between client copy and client transport?
    give me the steps that how to make a applications data copy from production to QAS.
    thanks
    priyan

    Hi,
    what is the defferent between client copy and client transport?You better google it..! 
    here is the result..
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctscco/bcctscco.pdf
    Follow the standard procedure of System Copy from PRD => QAS :
    Download guide as per your release:
    http://service.sap.com/systemcopy
    What is Systemcopy:
    http://help.sap.com/saphelp_rc10/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/frameset.htm
    Regards;

  • Where Client ID and Client Secret of SharePoint .app file will be stored

    Where Client ID and Client Secret of SharePoint .app file will be stored, i had published my app in the production, and now i need to enhanced the app, and i want to publish my app again, so where can i get my previous Client ID and Client Secret

    If it's provider hosted app, then you can find ClientId in a AppManifest.xml, and in a web.config of your web project.
    [custom.development]

  • Differences between Remote Client copy and Client export and Import

    Dear All, I am new to SAP. Please let me know the Differences between Remote Client copy and Client export and Import. Any response is greatly appreciated. Thanks a Million

    Hello Mallikarjuna,
    Follow the below note,
    https://service.sap.com/sap/support/notes/552711
    which describes the answer to question - Which is better or faster, a client transport or a remote copy?
    Basically client transport would be preferred if the network connection between the source and target system is slow.
    For more help,
    http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm
    Regards,
    Debasis.

  • Diff client depandent and client independent

    HI,
    what is different between client dependent and client independent.Please explain...
    gaurav mittal

    client dependent is when u make some configuration which will effect all the clients.. i mean changes are reflected in all clients
       for eg access sequence,
    client independent is when u make any changes in some client it will reflect in particular client in which u r working

  • How can a VI be both server and client?

    Hi, 
    I'm new in LabView and I'm trying to build a server and client VI using TCP/IP that runs in two computers. in my program I need both server and client VIs to communicate with each other which means I need both VIs to be server and client. I've tried using a case structure but it doesnt work. The only thing I achieved is a normal server/client system where the server sends a request and the client responses.But i need the client to send requests too.i have attached my VIs to this post.I would appriciate it if someone could help with this problem. 
    Thanks in advanced. 
    Rambaldi.
    Solved!
    Go to Solution.
    Attachments:
    Server-Client.zip ‏41 KB

    Do you really need a client and server on each PC? If you simply need that two to talk to each other they can once the client connects to the server. In most cases you only need one server.
    What Steve said about the not using the same port only applies to two servers on the same machine. A client must use the port the server is listening to and if the client and the server are on the same machine then they will both use the same port. However, only ONE of them is accepting waiting for connections on that port.
    In the code you posted you actually swapped the names. What you call the client is actually the server code and vise versa. In networking a server is an application that listens to an assigned port, accepts connections on that port and provides whatever services it has implemented. A client is an application that establishs a connection to a server. Once a connection is established the two applications can communicate in both directions. The applications themselves will define how the conversation should progress and whether it is a one way conversation or a two way conversation. You don't specify what you are trying to accomplish but I suspect you only need a single server.
    In TCP, every connection is defined by the source and destination IP addresses and the source and destination ports. The server uses a known port (FTP is port 21, HTTP is 80, telnet is 23, or some custom port in the user space beyonds the reserved ports) to listen for connections. The client will use the well known port of teh server and generally picks a random port for its port number. The LabVIEW VIs do this automatically. This is how a server and a client on the same computer can use the same port number. Two servers however cannot. The server application can spawn a child task allowing it to service multiple connections at one time though. Each connection will be unique though since the client's port number, address or both will change for each connection.
    OK, end of networking 101.
    Can you describe in a bit more detail what exactly you want to accomplish. Given that I could probably provide you with more information for your application.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Procedure to know client size, and client copy.

    Dear Experts,
                        I am new to client copy process.Please help me in some of my queries.The client which i want to copy is a customizing client (120) in development server.And new client to be created is also on development server itself.
    1). How can I know the exact size of the client which i want to copy?
    2). Will all the customizing done on the (120) client be copied to the new client created .
    3). Will all the profiles and parameters be copied as the source client?
    4). And Detailed process from client creation to client copy.
    Please help me .
    Thanks in Advance
    Regards
    Akif

    Dear Umesh,
                       As you told to add the space i did that .And started the client copy but it ended with 4 following errors:-
    Table/Object
    Component
    Error
    AGR_HIER
    BC-SEC-USR-PFC
    Write Error (See System Log)
    DSYS_PHCONT_E_CD
    PY-XX
    Write Error (See System Log)
    SOES
    BC-SRV-GBT
    Write Error (See System Log)
    ZFX_BCBNR
    DDIC Error        (See SE14)
      Please suggest what should be done of this errors.
    And thx for ur total support.
    Regards
    Akif
    <u></u><u></u>

  • Speed up Client EXPORT and Client import

    Hi,
    how to speed up the client export/import process (from scc8/scc7)?
    There is no profile,if we want User master records and the client specific data. then can we over write the client 2times first with user master data and then followed by client specific import.
    Main requirement is to Export Production client Specific data and users with authorization as CLIENT EXPORT (finally we can import the requests generated by client export) after importing to DEV server once can use as Quality client.
    please give your valuable suggestions in having client export and import to make Quality client in DEV server.
    DEV and PRD patch levels are different (remote client copy will fail in RFC system comparison)
    request you to give your valuable inputs.
    thanking you in anticipation,
    best regards,
    Raghav

    Hi Chowdary,
    This is not a big issue.
    You please find the TR list which are not moved PRD.
    Goto PRD->STMS_IMPORT find the TR list (which are in white color symbol) not moved to PRD.
    Then ask the respective consultant about TRs. Then re-import the TR in QAS. The old configuration will be occured in QAS. The TR which is moved to QAS, Now also it will be in green color only.But just re-import it and get the confirmation form respective consultant.But the user details will not available.
    hope this is useful.
    Regards,
    Patan Thavaheer.

  • Client independant and client dependant

    can anybody explain me what exaclty is clientdependant and independant..also cross client means?
    thanks and regards
    vijaya

    Hi Durga,
        As the name says
        Client - for example assume there is company called
                 "sony".  It can have many plants across the
                 countires. Sony divides these plants into
                 different groups based on functionality.
                 These groups are called client.
        Mostly which ever the object that is developed in the SAP will developed in a way that is usefull across users.
        But there will some sepcific needs for users/clients of SAP like language barriers....units..currecies....etc...etc. Which will be not same for all.
        Client dependent - if object is prepared taking
                           into consideration of above    
                           example barriers it is dependent
                           ELSE.
                           It is client indpendent.
       Client dependent or independent can be know for the filed sy-mandt.  and also in SE09

  • Client depemdend and independent

    Hi,
    What is client depemdend and client independent in sap
    Regards
    venkataswamy

    Hi,
    Workbench is client independent....customizing is client dependent.
    If you are changing some objects which will reflect all the clients in one instance---these called as workbench req
    If you are cusomizing something which will effects only in working client----these called as customizing req
    Regards
    Nick Loy

  • How to save an attachment to Opportunity and BP

    How to save an attachment to Opportunity and BP.
    I want to know how to delete an attachment to Opportunity and client.For this I am using the FM  SDOK_LOIO_DELETE_WITH_PHIOS.
    Using this I am able to delete the attachment but not the corresponding Attachment Guid value from database table SKWG_BREL.
    Clarify me on this,why its not deleting from database table.
    Please tell me the code.
    Thanks
    Prema.

    Hi Prema
    Use the class CL_CRM_DOCUMENTS and method DELETE to delete your current attachments.
    Fill the structure BUSINESS OBJECT and IOS. you will be able to delete the document.
    Use method CREATE_WITH_TABLE or CREATE_WITH_FILE to save an attachment to opportunity or business partner.
    Hope this helps.
    Thanks
    Karthik

  • Difference between client dependent table and client independent table

    hi all,
                  i m new in sap pls tell me the difference between client dependent table and client independent table.
    tell me in detail.
    thanks and regards
      vikas saini

    HI
    Client dependent Means if you create that data in one client is limited to that client only and it is not accessable in other clients
    Like SAP SCRIPTS and STD texts data
    where as Client Independent means the data if you create in one client that is available in that as well as in other clients
    Like SMARTFORMS, All dictionary Objects data and Repository objects data like Programs, Fun modules, tables etc..
    There is no specific reason behind why scripts are client dep[endent and smartforms are client independent!!!
    As for SAP -- Scripts are called client dependent because if you create client in say,200 it would be available in that only.If you want to test the script in client 300 then it won't be there,you will have to go to transaction se71 in 300 .Then Utilities-> Copy from client.Give the source as 200 & form name(i.e. script name) & copy.
    Few more reasons why....? Please read below:
    SAPscript technology is based on a mainframe product from the 1980s.SAPscript forms have always been -- under the hood -- relatively passive objects, with minimal embedded logic. These forms were designed to be driven and controlled by ABAP programs, much in the way ABAP programs read in database tables to produce reports;
    if you ever download a SAPscript form (e.g., via utility program RSTXSCRP), and look at the portable text file it produces you'll see what I mean.
    Many text objects (e.g., invoice header texts) are bound directly to documents which are client-dependent, so it makes sense for these text objects to also be client-dependent. From a complexity standpoint, SAPscript forms are close enough to these text objects where I can see how it made sense at the time to make them client-dependent too.
    What is client dependent and Client Independent
    https://www.sdn.sap.com/irj/sdn/forums

  • Which client is ABAP client after copy client?

    I had copied a new client 800 from client 000, and client 800 is used for bi production client.
    When i follow the guide "Template Installer", need to fill the filed "ABAP Client", so which client should i fill in?
    The installation usage type is ABAPJava, BIEP
    Message was edited by:
            Jianyong Wen

    Jianyong,
    ABAP client should be 800.
    Mimosa

Maybe you are looking for