How do: Unzip an .exe file (a firmware update for a Samsung TV) and what is the best unzip software to use...Thanks

Mac Book Pro 15" (mid 209) LION OS 10.7.5, Samsung instructions from their website: download firmware update. Doubleclick on USB and unzip file. (I dont have any unzip software as of yet; at least I dont think I do, because when I attempt to unzip the file, a page pops up that looks like hieroglyphics)
Thanks in advance.

You cannot open .exe files on a Mac. Was there no .dmg file, or something on Samdung's website about a download for Mac? Seems typical of Samdung to do things like this.

Similar Messages

How do I delete music from my iPhone and what is the best way to add and delete music?

How do I delete music from my iPhone and what is the best was to add and delete music to the iPhone?

See Here...
iPhone User Guide
and here
http://www.apple.com/support/iphone/syncing/

I have a Pages file that I would like to make secure. What's the best way to do that?

I have a Pages file that I would like to make secure. What's the best way to do that?

Inspector > Document > Document > Require password to open
Peter

My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

My computer is part of the iMac 1TB Seagate Hard Drive replacement program. What is the best external modem to use in order to back up my files prior to me dropping off my computer.

As Babowa says, get an external disk. You should have one for normal backups anyway.
Actually, I'm a strong fan of having multiple backups. 3 copies including the original, 2 different backup formats, and 1 backup off-site.
And when you have your iMac in for service, if you have just 1 backup at that point in time you have just 1 copy of your data. I get paranoid about my data.
But if you are just making 1 backup, I would use SuperDuper (free for a full clone, and extremely good software, as is Carbon Copy Cloner, but it is not free anymore).
And then I would "Boot" from the clone, to make sure it was a good clone.
Booted from the clone, I would then use Applications -> Utilities -> Disk Utility to zero the original disk, as suggested by Babowa, so that when they replace the disk, the original disk containing your data is not in the hands of strangers. A single pass of zeros is more than good enough as an erase, as the chances are no one is going to spend the money needed to try and read the erased data. It is not like you have any super secret data, just stuff you do not want the casual data theif to get. You will find the zeroing options under Disk Utility -> Erase -> Security Options
Just make sure you actually boot from your clone before erasing your original. And if you are paranoid like me, make 2 backups, then erase the original :-)

I have 91 file that are pdfs i need to make searchable what is the best way of doing this

help
i have 91 file that are pdfs i need to make searchable what is the best way of doing this

Hi ismaelr61128862,
I would recommend you to try Advanced search option of Acrobat software, Go to Edit and then Advanced search.
Hope that helps. In case you have any further questions please provide sufficient amount of details so that i can assist you more accurately.
Regards,
Rahul

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. What is the best way to do this

I am trying to make a pdf of a file and I need to get the file size to be no bigger than 10MB. Even when I save it, the image quality at minimum the file size is 10.9 MB. What is the best way to do this

@Barbara – What purpose is that PDF for? Print? Web?
If web purpose, you could convert CMYK images to sRGB. That would reduce the file size as well.
A final resort to bring down file size is:
1. Print to PostScript
2. Distill to PDF
That would bring file size down even more. About 20%, depending on the images and other contents you are using, compared with the Acrobat Pro method. If you like you could send me a personal message, so we could exchange mail addresses. I could test for you. Just provide the highres PDF without any downsampling and transparency intact. Best provide a PDF/X-4.
I will place the PDF in InDesign, print to PostScript, distill to PDF.
Uwe

HT1751 How to transfer iTunes media files from external drive to another external drive and bring in the library from the main drive.

I have my iTunes media on an external hard drive while the library is on the main computer drive. I want to move both to a larger external drive. How do I get both together? When I consolidate, it only transfers the media files. Help.

Since I already consolidated, can I just move the library to the root level of the external drive then option click to point to that library? But using that method, all the media files are at the root level along with the iTunes folder. So nothing will be in the iTunes media folder itself. WIll that work?

How can I work around this issue when buying a new mac? And what will the difference be in speed?

OK. In a nutshell.
I am getting render times (converting to H.264 for web, 8000kbps, 720x1280) of about 25 minutes with my current Macbook Pro - 4GB ram. Without doing anything else with the machine.
First question - how much can I reasonably expect this time to reduce to with:
A. 21.5-inch: 2.5GHz
2.5GHz Quad-Core Intel Core i5
1920 x 1080 resolution
4GB (two 2GB) memory
500GB hard drive1
AMD Radeon HD 6750M with 512MB
- - - OR - - -
B. 15-inch: 2.2 GHz
2.2GHz quad-core
Intel Core i7
4GB 1333MHz
500GB 5400-rpm1
Intel HD Graphics 3000
AMD Radeon HD 6750M with 512MB GDDR5
Built-in battery (7 hours)2
Am I going to buy myself much time?
Secondly I would like to keep my existing MacBook Pro. Installed on this machine I have FCP 6. I regulary edit as I own a produciton company. I cannot upgrade to Lion as it does not support FCP 6.
I could upgrade to FCP 7 (which would cost a fortune and still would only provide one licence) or FCP 10. The later is attractive, but looking at Apple's Specs, I meet all the specs on my MacBook bar the graphics card. I have a GL Graphics Card (GeForce 8600M GT) but for some reason this is excluded from the list of acceptable graphic cards.
So...the possibilities are:
A. Get a iMac. Downgrade it to Snow Leopard. Back up from my Time Machine so FCP is now on both machines. Is this even possible? Since the license will only cover one machine?
B. Get a iMac. Keep as Lion and buy FCP 10. Upgrade MacBook to Lion, but partition the drive with Snow Leopard so I can still have FCP 6. Download FCP 10 to my MacBook and hope it works even though my graphics card is not supported (I hear it might). How do I even get FCP 10 on my MacBook? Will it tell me I cannot install it because it recognises I don't have the right graphics card?
C. Get a MacBook Pro. Do all the above, but if it doesn't work, sell my old MacBook Pro.
Any help on this matter would be greatly appreciated.

The warranty will be valid within one year from the original date of purchase. this is the date that the device was purchased either from apple or an apple authorized reseller.
you are able to purchace the applecare protection plan within one year of the original date of purchase as well, provinding there is no accidental damage to the device.
This page pertains to your question:
http://www.apple.com/support/products/faqs.html
hope it helps.

What is the best slideshow software that also supports video clips AND lets you fade music files?

I am looking to make a slideshow but want to include some video clips too. Also I'd like to be able to fade the music in and out at the beginning and end of the songs. I don't want anything too complicated. I've looked at the demo of Fotomagico but I cannot control the music fading in and out only the overall volume. I also looked at Photo to Movie but the demo does not show how to include video clips. Any help would be greatly appreciated!

Hi Michelle. I guess you could do what you are asking with Photoshop CC with its video timeline.
Create a Slideshow in Photoshop | Understanding Adobe Photoshop CS6 | Adobe TV

Deployment (Redistrubution) CR2008 - bloated (large) files and what's the best practice

Post Author: basit
CA Forum: Deployment
I am a rookie to CR ; and started deployment(CRXII) with my POS program written in .Net VB 2005 and the msi was really large (85mb) ; I bought the latest version (CR2008) after reading that it's much smaller. . .
I have a dilemma and frankly donu2019t know which one of the packages to bundle with my redistribution or how to do this?
You given three options :-
1)      The 25mb; exe version u2013 This is great as itu2019s very much smaller yet when executed it requires you to insert a serial number? ; how can I use this without having the client insert my serial number.
2)     The msi version which is almost twice the size of the above
3)     The click one version which is like the one above just does have some language folders
Please assist ; thanking you in advance

Post Author: Justin Azevedo
CA Forum: Deployment
You dont need to insert your serial number. Just press NEXT and go right past it leaving the field blank. This only works with CR2008, the XI runtime needed this number.

How do i transfer DVD files to my Ipod? What are the best programs to use?

I have an annoying time trying to get DVDs onto the Ipod. I can't help but think why Apple didn't make it easier to do this. Does anyone know how to get DVDS into the Ipod and what are the best conversion programs?

The iTunes/iPod ecology is designed to make it hard to use the iPod for casual copyright theft, but extracting your data is eminently feasible.
You should be able to recover the media with the tips in this post from forum regular Zevoneer. Data in your apps is potentially at risk but you can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but I've never needed to test the method so I can't say for sure.
tt2

Query: how to use structure and selection and what's the difference between

Query: how to use structure and selection and what's the difference between these two?
Would be appreciated if some experts here give examples to demenstrate on how to use structure and selection in query and what's the difference between these two?
Thanks in advance!

Hi Kevin,
1. Well by default all the KF that you include in your query go into a Key Figure Structure. You can additionally have another structure for defining how your chars are laid out. A common example is a Calmonth structure where you have selections for 12 months, quarers and YTD values. This would be a char structure with different selections (for each month, qtr etc)
2. Yes, a selection with a KF is the same as restricting a KF. You can use am RKF is you have one on the left hand side, or if you need to do this locally in the query, right click the structure and choose New Selection, then proceed to choose your KF and reqd char values.
Hope this helps...

Is there a firmware update for ipf5100 and OS 10.10?

I have just restarted my ipf5100 after a long downtime. Current firmware version is 1.43. I see canon has a firmware update for Mac OS10.8 and 10.9. Will that work for 10.10, or is there another upate for 10.10?

don't think there is an update for the firmware as of now.

Firmware update for Superdrive G4 Mini

The latest firmware update for "some" superdrives had me hoping that the nagging problem would be fixed, alas, no luck.
MATSHITA DVD-R UJ-845C:
Firmware Revision: DPP9
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, DVD-DAO
Now I know for a fact that this drive does support burning -DL DVDs, except it has been crippled by Apple. Thank you.
What are the odds this would ever be rectified?

Hello,
What are the odds this would ever be rectified?
Not likely.
The Mac Mini G4 is now a discontinued product.
Apple will generally only go backwards to fix problems. They don't usually go back to add features to machines that have been discontinued and replaced with a new model.
So, if there was an update necessary to restore operation of the drive, then they would probably release one.
But, if there was a way to enable the drive to burn media it doesn't currently burn, then they are not going to do it now.
They are more interested in selling you a new system with the features you want, than enabling the features you want on a product you already own.
But, that's just the way things are done.
I hope this helps.

How to execute a .exe file in java(Jsp) without using a process ???

Hi All ,
How to execute a .exe file in Jsp without using a process ??? ...
Is it Possiable ????

itsdhanasaraa wrote:
But as this a web application ... By using Runtime i'm getting some probs ..
Let me guess, you want your web application to run a program on the client and to your surprise that's not working?
Ain't gonna happen.
its taking more time to execute .... that's y is there any other option to execute .exe file other than Runtime.getRuntime().exec("filename");Write proper English and you may be taken more seriously.
1) it's not "taking more time to execute", whatever that's supposed to mean.
2) there's no other way to execute something. Not that you should every use even that way anyway
3) whenever you start thinking of executing external programs from Java, start thinking of not using Java in the first place.

How do: Unzip an .exe file (a firmware update for a Samsung TV) and what is the best unzip software to use...Thanks

Similar Messages

Maybe you are looking for