How do use startdard function key in windows?
I found out from the internet how to use function keys without pressing Fn key by configuring preference. However I need to do the same thing in windows (I am running windows XP on the same laptop).
Anyone knows how to? I can not figure it out.
Have you installed all the necessary Boot Camp drivers for Windows?
Similar Messages
-
How to use standard function keys as custom keys
how to use standard function keys as custom keys.
i have encountered that problem while developing a screen, there i'm supposed to use standard function key F2 ( which actually meant for choose) for clearing the screen fields where the cursor is present and f1 for saving data that entered in screen fields, etc...
kindly help me out.Hi ,
Solution to use SAP reserve function keys F1 .. F4 (mostly this requirement comes up for RF screens) can be acheived by assigning your new Function code using the Menu path Utilities --> F key Consistency in the Menu Painter (SE41) . Once you assign your cutom function code to the standard Fn keys the only remaining step is to make sure that you set a curson on any of the field on sceen by using the Key Word "SET CURSOR" .
If you dont use the key word SET CURSOR in the PBO of the screen then you might not see any response for F4.
Thanks -
Hi fellow apple guys, i have this problem. Hope you can help me. I don't know how to use the function keys (F1 to F12) on my macbook air. Pls help
Out of the box, to use the function keys as function keys, hold down the fn key when you press the key. Otherwise, you get the picture function on the key. You can reverse this behavior in the Keyboard system prefs.
-
How to use the Function keys as function keys instead of action keys?
When I press F1 or any of the other F keys it does what the symbol says on the key (volume/skip track etc).
How do I actually use the F keys and not the symbols?Hi again John,
...is there a way to switch that around so I use the "fn" key for sound etc?
Do the following:
1. Fire up System Preferences
2. Select Keyboard & Mouse
3. Select the Keyboard tab.
4. Tick the "Use all F1, F2, etc. keys as standard function keys" box.
That's it. You have now reversed the default use of the function keys. If you need to increase/decrease sound, brightness etc then press 'fn' plus the appropriate function key.
Kryten -
How to use a function key on keyboard for executing a non SAP program
Hello Gurus.
My client want to run a non SAP program selecting the specific function key on keyboard during the entering data on SAP.
i knew that it is possible to execute a non sap program after adding special program each by SAP program. but, it is huge jobs.
client wants to run a non sap program wherever he is on SAP program. Is it possible ?Hi,
1. Create a ".exe" file for the .NET application.
2. Create a PF-STATUS and assign the Function Code for the desired Function Key in the SAP program.
3. In the USER COMMAND code inside program, when the respective function code is triggered, write the below code with the path to the .NET exe file.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
document = '.NET exe file path'
EXCEPTIONS
OTHERS = 1. -
Hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to
hey i hav an hp pavilion g series n i would like to kno how use the function keys without having to click on the fn + function key
Hi,
You can change this in your system bios as described in the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02035108&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How can I use the function keys in a GUI with swing?
I'm wondering how do you declare you want an action to happen when a user uses a function key or any key for that matter. How can you specify something frame wide or for that matter for a specific jtextbox?
you need to use an accelerator
setAccelerator(javax.swing.KeyStroke.getKeyStroke(java.awt.event.KeyEvent.VK_A, java.awt.event.InputEvent.SHIFT_MASK | java.awt.event.InputEvent.CTRL_MASK) -
How do I turn off the requirement to press control when using a function key
When using my wireless keyboard, it requires me to press controls to use the function keys (F3, F5, F70.) However, this makes it so some of my games controls won' work,(For example, in Minecraft I can't access the debug menu.) Is there any way to disable this.Thank you for your support
Please take these steps if you're prompted for a password when moving items in your home folder to the Trash.
1. Triple-click anywhere in the line below on this page to select it:
~/.Trash
2. Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
3. The dialog should show "You can read and write" in the Sharing & Permissions section. If that's not what it shows, click the padlock icon in the lower right corner of the window and enter your password when prompted. Use the plus- and minus-sign buttons to give yourself Read & Write access and "everyone" No Access. Delete any other entries in the access list.
4. In the General section, uncheck the box marked Locked if it's checked.
5. From the action menu (gear icon) at the bottom of the dialog, select Apply to enclosed items and confirm.
6. Close the Info window and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above. -
How to replace F4 using another function key
Experts:
How can i change the search help function key F4, using another function key,for example F11, when i press F11 the system perform the search help.
thanks!you can do this using menus/buttons(dialog programming) and there you can define your short keys, and event can be trapped by sy-ucomm in the program. Menu can be set by writting set PF-Status 'MENUNAME' or using se37.
-
How to use this function call function 'REUSE_ALV_COMMENTARY_WRITE' in alv
hi all
thanks in advance
how to use this function in alv programming
call function 'REUSE_ALV_COMMENTARY_WRITE'
why use and what purpose use this function plz tell me details
plz guide me
thanksHi
see this exmaple code where i had inserted a LOGO by useing this FM
*& Report ZTEST_ALV_LOGO
REPORT ztest_alv_logo.
TYPE-POOLS : slis.
*ALV Formatting tables /structures
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: gt_events TYPE slis_t_event.
DATA: gs_layout TYPE slis_layout_alv.
DATA: gt_page TYPE slis_t_listheader.
DATA: gs_page TYPE slis_listheader.
DATA: v_repid LIKE sy-repid.
*ALV Formatting work area
DATA: w_fieldcat TYPE slis_fieldcat_alv.
DATA: w_events TYPE slis_alv_event.
DATA: gt_bsid TYPE TABLE OF bsid WITH HEADER LINE.
INITIALIZATION.
PERFORM build_events.
PERFORM build_page_header.
START-OF-SELECTION.
*perform build_comment. "top_of_page - in initialization at present
SELECT * FROM bsid INTO TABLE gt_bsid UP TO 10 ROWS.
*perform populate_for_fm using '1' '3' 'BUKRS' '8' 'GT_BSID' 'Whee'.
*USING = Row, Column, Field name, display length, table name, heading
*OR
PERFORM build_fieldcat.
gs_layout-zebra = 'X'.
*top of page event does not work without I_callback_program
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_structure_name = 'BSID'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = 'This is the grid title'
I_GRID_SETTINGS =
is_layout = gs_layout
it_fieldcat = gt_fieldcat[]
it_events = gt_events[]
TABLES
t_outtab = gt_bsid.
Form..............: populate_for_fm
Description.......: Populates fields for function module used in ALV
FORM populate_for_fm USING p_row
p_col
p_fieldname
p_len
p_table
p_desc.
w_fieldcat-row_pos = p_row. "Row Position
w_fieldcat-col_pos = p_col. "Column Position
w_fieldcat-fieldname = p_fieldname. "Field name
w_fieldcat-outputlen = p_len. "Column Lenth
w_fieldcat-tabname = p_table. "Table name
w_fieldcat-reptext_ddic = p_desc. "Field Description
w_fieldcat-input = '1'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " populate_for_fm
*& Form build_events
FORM build_events.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = gt_events.
READ TABLE gt_events
WITH KEY name = slis_ev_user_command
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_user_command TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
READ TABLE gt_events
WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_top_of_page TO ls_event-form.
APPEND ls_event TO gt_events.
ENDIF.
ENDFORM. " build_events
*& Form USER_COMMAND
When user command is called it uses 2 parameters. The itab
passed to the ALV is in whatever order it currently is on screen.
Therefore, you can read table itab index rs_selfield-tabindex to get
all data from the table. You can also check r_ucomm and code
accordingly.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
READ TABLE gt_bsid INDEX rs_selfield-tabindex.
error checking etc.
SET PARAMETER ID 'KUN' FIELD gt_bsid-kunnr.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
ENDFORM. "user_command
*& Form top_of_page
Your own company logo can go here if it has been saved (OAOR)
If the logo is larger than the size of the headings in gt_page,
the window will not show full logo and will have a scroll bar. Thus,
it is a good idea to have a standard ALV header if you are going to
use logos in your top of page.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = gt_page
i_logo = 'ENJOYSAP_LOGO'.
ENDFORM. "top_of_page
*& Form build_fieldcat
*Many and varied fields are available here. Have a look at documentation
*for FM REUSE_ALV_LIST_DISPLAY and REUSE_ALV_FIELDCATALOG_MERGE
FORM build_fieldcat.
w_fieldcat-fieldname = 'BUDAT'.
w_fieldcat-seltext_m = 'Dte pst'.
w_fieldcat-ddictxt(1) = 'M'.
w_fieldcat-edit = 'x'.
Can change the position of fields if you do not want them in order
of the DDIC or itab
w_fieldcat-row_pos = '1'.
w_fieldcat-col_pos = '10'.
APPEND w_fieldcat TO gt_fieldcat.
CLEAR w_fieldcat.
ENDFORM. " build_fieldcat
*& Form build_page_header
gt_page is used in top of page (ALV subroutine - NOT event)
*H = Header, S = Selection, A = Action
FORM build_page_header.
For Headers, Key is not printed and is irrelevant. Will not cause
a syntax error, but is not used.
gs_page-typ = 'H'.
gs_page-info = 'Header 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'H'.
gs_page-info = 'Header 2'.
APPEND gs_page TO gt_page.
For Selections, the Key is printed (bold). It can be anything up to 20
bytes. It gets printed in order of code here, not by key value.
gs_page-typ = 'S'.
gs_page-key = 'And the winner is:'.
gs_page-info = 'Selection 1'.
APPEND gs_page TO gt_page.
gs_page-typ = 'S'.
gs_page-key = 'Runner up:'.
gs_page-info = 'Selection 2'.
APPEND gs_page TO gt_page.
For Action, Key is also irrelevant.
gs_page-typ = 'A'.
gs_page-info = 'Action goes here'.
APPEND gs_page TO gt_page.
ENDFORM. " build_page_header -
How to use data function using characterstics variable for calculation on
how to use data function using characterstics variable for calculation on attribute as key figure
Hi Gayatri
Did you not see my answer for CASE because CASE does indeed offer the use of the BETWEEN clause, but DECODE does not. Let me give you a little synopsis of DECODE.
In its most simple form it takes 4 values and looks like this: DECODE(A, B, C, D)
This essentially means, IF A = B THEN C ELSE D
The trick to solving BETWEEN in a DECODE is to work out algoriths where A = B. Because we don't know how many values are between 00 and 99, although I could guess there were 100 we could of course have 100 parts in the DECODE but that would be awful. How about if we look at it another way and say this:
IF PART_NUMBER < 'SDK00' THEN pay_amount
ELSE IF PART_NUMBER > 'SDK99' THEN pay_AMOUNT
ELSE pay_amount + 100
This statement only had 2 hard coded values, but how to make DECODE work with less than? Easy, we use the LEAST function. The LEAST function takes 2 values and returns the one with the lowest value. So I use LEAST(PART_NUMBER, 'SDK00') then whenever the PART_NUMBER is lower than SDK00 it will be true. A similar situation exists for the opposite function GREATEST. Putting all of this together then, you can do this:
DECODE(PART_NUMBER, GREATEST(PART_NUMBER, 'SDK00'), DECODE(PART_NUMBER, LEAST(PART_NUMBER, 'SDK99'), PAY_AMOUNT * 100, PAY_AMOUNT), PAY_AMOUNT)
In English this can be read as follows:
IF the PART_NUMBER is greater than or equal to SDK00 and the PART_NUMBER is less than or equal to SDK99 THEN PAY_AMOUNT x 100 ELSE 0
Best wishes
Michael -
How to use email function in crystal report ?
Post Author: kudo
CA Forum: .NET
Hi I'm a novice by touching .net not more than 2 months. Can somebody guide me how to use email function provided in crystal report components?(Better put a sample code so that I can understand well.) ps: I'm using VS2005 VB.net.Thanks.Post Author: mewdied
CA Forum: .NET
'EXPORT to EMAIL ''' Code for exporting the report to Mapi (.Net Windows application) ''' *For a Web application you must export to disk as a PDF file first.
crReportDocument.Load(Application.StartupPath + "\World Sales Report.rpt") crMicrosoftMailDestinationOptions = New MicrosoftMailDestinationOptions With crMicrosoftMailDestinationOptions .MailCCList = "[email protected]" .MailToList = "[email protected]" .MailSubject = "Attached exported report" .UserName = "admin" .Password = "password" End With
crExportOptions = crReportDocument.ExportOptions With crExportOptions .DestinationOptions = crMicrosoftMailDestinationOptions .ExportDestinationType = ExportDestinationType.MicrosoftMail .ExportFormatType = ExportFormatType.PortableDocFormat End With
'Add some error handling Try crReportDocument.Export() MsgBox("Report exported successfully.") Catch err As Exception MessageBox.Show(err.ToString()) End Try
Hope this helps -
How to use the function module ....
hi
how to use the function module ssf_function_module_name in smartformsHi..
If you are using this Function module, you can get the generated function module name of smartform dynamically. It is good progrmaming practice to get the fucntion module name dynamically because there might be some problems if you are hard coding in program.
This will return the name of the function module and then from the exporting parameters you can use the fucntion module name to pass parameters to Smartforms.
Check this link.I am expalining here how to use this function module.
https://wiki.sdn.sap.com/wiki/pages/pointstab/viewpageversion.action?pageId=36109&version=2
Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
<b>Reward points if useful</b>
Regards
Ashu -
Hi:
About HR infotype 0024,As qualification data goes to the OM Infotypes, How to use the function moudle:RHPP_Q_PROFILE_WRITE?
thank you.thank you and the 'BAPI_QUALIPROF_CHANGE' can wok.
DATA:it_profile_add TYPE bapiqualific_tab OCCURS 0 WITH HEADER LINE,
it_profile_delete TYPE bapiqualific_tab OCCURS 0 WITH HEADER LINE,
it_return TYPE bapireturn1 OCCURS 0 WITH HEADER LINE.
it_profile_add-obj_id = '20000116'. "Q ID
it_profile_add-rating = '0001'. "精通程度
APPEND it_profile_add.
CALL FUNCTION 'BAPI_QUALIPROF_CHANGE'
EXPORTING
plvar = '01'
otype = 'AP' "申请者
sobid = '00000170' "PERNR NUMBER
IMPORTING
return = it_return
TABLES
profile_add = it_profile_add
profile_delete = it_profile_delete
ERR_PROFILE =
CHANGE_PROFILE =
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
MESSAGE 'FAILED' TYPE 'I'.
ELSE.
MESSAGE 'SUCCESS' TYPE 'I'.
ENDIF. -
Using of function keys (F1, F2...) in Java Webdynpro
Hi
i would like to ask whether we can use the function keys like f1, f2, .....in the java webdynpro applications
and if so how it is possible to do so
Regards
JMthanks
where will i get a list of keys that you were refering
" some keys are reserved by the browser and cannot be used by Web Dynpro applications. "
and secondly i want to know about the function keys (f1, f2....)whether we can use these function keys in java webdynpro and not for hot keys
if you can share the information with me it would be good
Regards
JM
Maybe you are looking for
-
Smooth Scrolling Credits for FCP !#$#
To start, I am creating scrolling credits from scratch in Motion 2 to import into my NTSC-DV FCP5 session. I had accomplished beautiful scrolling credits in Motion to FCP about 6 months ago and cannot for the life of me produce good looking scrolling
-
Hp f4440 all in one printer will not copy or scan
My F4440 all in one has suddenly stopped working. The on light blinks constantly and the little orange light at the front of the printer blinks as well. I have unplugged it from all electricity several times and checked all connections. No luck.
-
Hi All There , I am calling ALV report in my bapi but it is not gettin called it is not giving screen of parameter selection derectly selectin all parameter coding is as below points assured. Data: MTAB_REPORT_HTML type standard table of W3HTML WITH
-
Two materials ordered separately from vendor to be used as single material
Hi All, Suppose there are two materials say A and B which are ordered separately from vendor and then placed in storage location as two diffrent stock materials. But while issuing the goods, these two materials A and B need to be combined as differen
-
These are the specs of my machine: Hardware Overview: Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Mine does not matach exactly to this but