HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

Did the microphone come with a user manual? You might contact support for the microphone.
Just so you know the iPhone 4 has a built-in microphone

Similar Messages

HT1296 I was using the iCloud for my iPod and had recorded an important Voice Memo on the device. Before I was able to store it on my computer, the device stopped working. I have the data on the Cloud, how can I get that back to my iMac?

I was using the iCloud for my iPod and had recorded several irreplaceable Voice Memos. It went up to the Cloud, but I wasn't too savvy with the Cloud at that point, so it wasn't syncronizing to my home computer. So, the thing is that the iPod died and the backup is in the Cloud and I would like to load the backup to my iMac to recover my data. How can I do that? Thanks

The new device I got to replace the iTouch is a iPad and I don't see the playlist I created with previous voice memos on it at all. Is there any way to access them on the iPad? If I erase the iPad and restore it with the old back up will the Voice Memos come along and get in to my home computer or will I be out of luck?

How to Use the language function for assignment and validation

Hi All,
If anyone can explain me in details with example ,how to use the language function for assignments and validations?
Thanks
Arnab

Hi Arnab,
The expression is checked only for the current MDM session.
If u login with the ABC language it will always show the ABC language no matter how many times u execute it.
Try connecting to the DM with the XYZ language.
It should go to the if part rather than else.
Hope it helps.
Thanks,
Minaz

How to use the Variants in SAP Transportation and what is its use ?

Hi experts,
How to use the Variants in SAP Transportation and what is its use & How to create a variant in SAP ?
Can anybody answer this ?
Regards,
Shakti

Hi,
If you are asking about "slection vairants" in SPRO settings of "shipment cost document" then
When it is activated,
each user can have his own slecetion and list criteria for
1. List shippment costs:calculation
2. List shippment costs: settlement
This can be directly saved from VI01 screen by the user.
from environment> lists
This is user specific only.
Hope this helps.
Regards,
Sharan

HT1382 How to use the i-tunes to backup my iphone apps, thanks

How to use the i-tunes to backup my iphone apps, thanks

Plug the iPhone into the computer.
From the Summary tab, select the option to backup to iTunes on the computer.
Sync.

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

I'm looking into how apps use the cloud. Would you consider any app with social media access as uploading information to the cloud? e.g. being able to tweet through an app is the same as uploading data to the cloud

Most of us in this forum are users who volunteer on technical issues, and not Adobe employees although they do drop in from time to time. As users we simply have no control over activation and that's why you are not getting responses.
If you havn't done so,you might try the Muse forums and see if you can get a staff member to look into it. Have your case numbers and phone transcripts handy.
Last option is to keep calling customer service until you get someone who will help or ask for a supervisor.
Hope this get resolved,
Gene

How to use the same bean from Jsp and Servlet

I want to use the same bean instance from both the servlet and jsp.
for eg. if a create a bean using the jsp:useBean in servlet and if a modify some values, that values should be reflected while i access the same bean from the servlet. But instead of that the servlet is creating a new instance of the bean.
is it possible?
Thanks in advance

Hi,
When you call jsp:useBean you inform a scope (session, request, page...)
This means the bean instance will be stored in that scope.
So, if the informed scope is session, then, in the servlet you could get the bean instance back from the session, this way:
HttpSession session = request.getSession();
Bean b = (Bean) session.getAttribute("bean_id");
Regards,
Filipe Fedalto

Where can I find out how to use the Journals feature in iPhoto for iPhone

I am new to Apple Support Communities. Not sure if this is the place that will help me work with Journals. Is there a manual or video which helps with teaching the features of the Journals application and how to use them? I am stuck knowing how to move around the images and changing the page set-up, among other perplexing features.

You need the iPhoto for iOS forum is here
https://discussions.apple.com/community/app_store/iphoto_for_ios
Regards
TD

How to use the calendar to add events and reminders?

Since updating to the most current software, I am unable to add events or reminders to my iphone calendar. Does anyone know how to use it now? I really miss my calendar!
Thanks in advance

randers4, you saved my life!! At least my social calendar life, including all my appointments and important dates. After the last update, my + sign went away, but turning it on in the iCloud settings did the trick. Thanks for your help!!

How to use the API for DATE, MONTH AND YEAR

I would like to use the java api in .util.calender in the java api to get the date.
How to implement the API for the "DATE","MONTH","YEAR" which are available provide by java?
can someone give me in one complete code?

From the Java Developers Almanac 1.4:
    Calendar cal = new GregorianCalendar();
    // Get the components of the date
    int era = cal.get(Calendar.ERA);               // 0=BC, 1=AD
    int year = cal.get(Calendar.YEAR);             // 2002
    int month = cal.get(Calendar.MONTH);           // 0=Jan, 1=Feb, ...
    int day = cal.get(Calendar.DAY_OF_MONTH);      // 1...
    int dayOfWeek = cal.get(Calendar.DAY_OF_WEEK); // 1=Sunday, 2=Monday, ...

How to use the same image map over and over

Sorry, I posted this a couple of years ago and got a good answer by Murray. I'm so rusty with it, I can understand how it works anymore.
Question:
I have a large jpeg image map for a hundred pages. The jpegs are all the same except I changed the city name for each one.
So for each corresponding htm page, the 4-5 links out are the same.
Waht is the trick to not have to create by hand hotspots? thanks.
I have previous notes, but I don't understand anymore, (too rusty) what they mean:
The good news is that you really don't need a template at all.
Just open one of your existing pages in DW, select that central image, browse to select the correct replacement image, and save the page with a new name. It will have all of the image maps already there, from the original image. One and done as they say."
My old interpretation of this:
select the large jpeg and then in link field drag over to the new city jpeg

Ok, Nancy, code copy/ paste did work fine.
what does this mean:
"Change the image in the properties panel to display your new image."
(the image is displaying ok)
NEverthesless, I think I got Murrays old notes.
Here is my new version of Murrays writing, easiest way I think:
You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo.

How to use the caseccading parameter in my ssrs report? with some scenioro?

Hi i have a complex report for that i am using the 3/4 parameters name list.
parm1:ProductId
parme2:manafacturer
pram3:productname
so here i will use these 3 paramters in my ssrs report .
so here i will create a casecading parameters using the above 3 parameters.
But here my requirement is..
1)for my user selcction select the paramater1 as ProductId based on the productID parameter the 2 nd 3 paramters
i want to display automatically without user selection
2),Here every productid have a single productName and single manfacturer
and here i dnt need the drop down list of 2 nd 3rd parameter for user selection. i need only the text boxes
4)am alredy tried for this but i will able to see only one value in the user selection of param1.but it would not change for the second selection
5)can you give me some idea hw would i show u 2nd and 3rd parameteer based on 1st paramter value without drop down list for my user seletion of my first parametr1
I guess u understand my requirement.
can you suggest me any help .....for the above requirement.
ThanX!

In your case you need to setup parameters like this
1. ProductId
Have a dataset which gives you list of productids. It should return atleast one field which would be the distinct productids from your table.
ie like
SELECT ProductID
FROM ProductTable
assuming ProductID is it Primary key
In report go to parameter properties for ProductId parameter
In Available Values tab choose the option Get values from query
Map the above dataset and choose value field name as ProductId and label also as the same
This will populate param 1 with values
2. Manufacturer
Have a dataset which gives you list of manufacturers. It should return atleast one field which would be the distinct manufacturer from your table.
ie like
SELECT Manufacturer
FROM ManufacturerTable m
WHERE EXISTS (SELECT 1
FROM ProductTable
WHERE ProductId = @ProductId
AND Manufacturer = m.Manufacturer
assuming Manufacturer field has unique values. map @ProductId query parameter to SSRS parameter ProductId you created above
In report go to parameter properties for Manufacturer parameter and map the parameter to dataset as per same sequence of steps before
3. Product
Have a dataset which gives you list of manufacturers. It should return atleast one field which would be the distinct manufacturer from your table.
ie like
SELECT ProductName
FROM ProductTable m
WHERE ProductId = @ProductId
assuming Manufacturer field has unique values. map @ProductId query parameter to SSRS parameter ProductId you created above
In report go to parameter properties for ProductName parameter and map the parameter to dataset as per same sequence of steps before
Now if you run the report the values for Manufacturer and ProductName keeps on changing based on value you chose for productid parameter
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

How to use the G/L Accounts, COA and related transactions from the SDK?

Hi all
Where can I find more documentation or examples on how to manipulate the G/L Accounts?
Does SAP makes journal entries automatically from an User Defined Table, Form or Field?
If I indicate an account to my table, how does the amounts entered in the amount column get reflected on the G/L Account? Do I have to run a query that enter the information into the G/L Account?
And if so, by running an update/insert query to the G/L accounts table does my add-on provokes losing SAP support over the clients data?

Hi Neftali,
I got simple answer.
Where can I find more documentation or examples on how to manipulate the G/L Accounts?
-> DTW is a great example. And you can find the APIs in SDK help file.
Does SAP makes journal entries automatically from an User Defined Table, Form or Field?
-> Nope. User Defined something can't make any automatic journal posting, I guess.
If I indicate an account to my table, how does the amounts entered in the amount column get reflected on the G/L Account? Do I have to run a query that enter the information into the G/L Account?
-> I can't understand this question. Can you explain more?
And if so, by running an update/insert query to the G/L accounts table does my add-on provokes losing SAP support over the clients data?
-> Yes. (Sure.)
Regards,
Hyunil Choi.

I want to learn how to use the existing stationary in Mail and add my own stationary.

I use the stationary in my Mail program often. I would like to learn more about using it, changing it, making my own stationary to use in Mail - and also to allow PC users to receive it.

Here's a thread that will possibly help:
https://discussions.apple.com/message/18175872#18175872
Mail templates use HTML, so those receiving your e-mail should able to view the stationery. It doesn’t matter if they’re on a PC or Mac.

How to use the Cannon Vixia HF20 HD SD Media cam with OnLocation

Actually the convenient use of SD media for all shooting with the Cannon HF20 almost makes the need to use OnLocation a moot point. Nevertheless, since I do own the program, I would like to now if it can be done. The camera has Component ( red - green - blue ) Out, HDMI and USB. I've tried various combos but OnLocation still does not recognize the cam. Maybe this camera is not suitable for using withing OnLocation. Other than that, it is an outstanding HD camera shoooting at 1920x1280. Shooting at 24P and 1080I.

OK,
IS IT POSSIBLE for OnLocation to detect an RCA input?
I've got a Vixia HF S100, and it has the same outputs as listed in the earlier post.
I'm willing to purchase an RCA converter to take the signal off my camera and run it through OnLocation to use as a reference only.
I'll be capturing on the camera of course, but for some studio shooting, it is necessary to see your live image within OnLocation or other Adobe programs...
Thanks for any help!

HOW DO use the Mikey 2.0 iPod and iPhone Microphone with my IPHONE4

Similar Messages

Maybe you are looking for