How Do We Charge N8 with its USB Cable?
Hello Everyone,
I tried to charge my N8 with USB cable but it didn't charge. I connected its USB Cable to my phone and laptop, but it didn't start charging my N8. Do I have to do something else?
If you know anything about it, please share the information here.
Thank you..
ToLGa
You can't but they may be a way around it. Not all usb ports support charging. Try the different ports on your laptop and see if any of them don't charge.
Similar Messages
-
there was a problem while updating ios 7.1 now my ipad isnt starting up just shows a symbol of itunes with a arrow towards it with its USB cable
YOU ARE IN RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY. -
Can no longer charge Nano with the USB cable
My iPod Nano (1st gen) won't charge via the USB cable any more. It will sync if there is enough battery life when I hook it up to the USB cable. However, if I leave it hooked up, it gets drained of all it's battery life. Fortunately I have a wall charger and a car charger and both of them will charge the Nano. It's a lot more convenient for me to charge it via my computer, but that's not possible any more. Is my Nano dying or is it possible the USB cable is damaged? If it's damaged, how can it sync but not charge? Why can I charge with other power sources but not the cable? Unfortunately, I don't have another iPod cable to test if the cable is damaged. If my Nano is dying, can you give me a rough estimate as to how long it will be before it stops charging all together. (I need to prepare my spouse for the upcoming iPod Touch purchase that will appear on credit card.)
Thanks.........JulieHere's my own trial and error analysis of my problem. I hooked my iPod up to my old G4 PowerBook and tried to charge it from there. It didn't charge but it also didn't lose any more power that I could tell. I then hooked it up to my MacBook's first USB slot. I heard that the first slot has more power than the 2nd slot due to the way the 2 USB ports are configured. Unfortunately, the iPod appeared to have lost some power, i.e. the USB port drained some of the power from the iPod.
I'm guessing I need to take it in to have my USB ports checked out. I prefer to take it to an Apple store with a Genius bar that is 3 hours away instead of to our "local" Apple repair shop that is an hour away. I have Apple Care and I believe my local shop will still charge me for time.
Thanks for the suggestions. Until I find a day when I can take the long drive, I'll just charge my iPod from with a wall charger. I'm grateful the iPod syncs and I have an alternate way to charge. -
Charge iPod with the USB cable
When I connect my iPod to a computer whithout iTunes installed, I get a new drive in windows. But on my iPod I get symbol in the display that says that I should not remove the cable before I disconnect the iPod in windows.
In this case the iPod charge until I disconnect the iPod in windows.
When I use iPod with my computer where iTunes is installed, I can press the Eject iPod button in iTunes and the iPod still get power from the USB cable, and the iPod still charge.
Is there any software so can do the same job as in the iTunes for eject iPod? Beacuse then I can charge the iPod with only the usb cable and still listen to the music.
iPod U2 SE Windows XP Pro
Windows XP ProI would try here first.
iPod touch: Hardware troubleshooting
Then to the Apple store. -
RE: Charging 6500c with generic USB cable
Hi All,
I bought myself a micro usb adapter to plug into my generic usb cable charger I used to use to charge my older 6101 but it doesn't seem to be charging. It's connected OK as as the phone tells me that it's charging and the battery icon indicates so but the power level stays the same even after 2-3 hours plugged in!
It worked OK with the 6101.
Just wondering if anyone has this problem and a solution? Is the power output incompatible with the new micro usb connectors? Also tried this with a wall usb charger connected using the nokia usb connector cable with the same result.
Apart from buuying a new micro usb charger specifically for the 6500c are there work around this? Don't want to throw away my old usb cables.
Thanks.Hi nutt3r
Apparently the only Nokia handsets that are able to charge via the CA-101 cable are the Nokia 6500, the Nokia 7900, and the Nokia 8800 Arte Edition.
Happy to have helped forum in a small way with a Support Ratio = 37.0 -
When I plug my phone into my PC with the USB cable an advertisement starts playing on my PC. The advertisement is for an add-on product called Backup Assistant Plus. How can I stop this?
I read of a work-around to stop this, but it does not meet my needs. The work-around is to change your USB connection option from "mass storage device" to the one of the options about uploading pictures. This would not work for me because I'm connecting the cable so I can access the phone's memory as a mass storage device!
This is a seriously obnoxious problem affecting millions of people. It's a common conversation in bars, and all the iPhone fans are saying--yea, I told you so, stuff from Motorola is junk. I'd recommend that it be fixed as soon as possible!
Model: Droid Razr
Android version: 4.0.4Yes, you can stop it. When you plug in the phone, down in the lower right of your screen, click and pull up the Motorola Device Manager. Do as you please with it.
-
i tried for update but when i saw the screen its showing an arrow with a USB cable towards itunes icon, and now i'm not able to do anything, i also tried to connect ipad through my laptop but no use
That message means that you have to restore the iPad now. There was a problem with the update. So connect the iPad to your computer and restore your iPad.
You can read bout it here.
http://support.apple.com/kb/ht1414
If that does not work you will need recovery mode. You can read about it here.
http://support.apple.com/kb/ht4097
Or you can follow these Recovery Mode Instructions
Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
Turn off iPad: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for iPad to turn off.
If you cannot turn off iPad using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the iPad turns off, release the Sleep/Wake and Home buttons.
While pressing and holding the Home button, reconnect the USB cable to iPad. When you reconnect the USB cable, iPad should power on.
Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears you can release the Home button.
If necessary, open iTunes. You should see the recovery mode alert that iTunes has detected an iPad in recovery mode.
Use iTunes to restore iPad. -
My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
My Mac simply ignores my Iphone when I connect it with the USB cable. WHY? how Can I fix it?
I was able to connect the first time, but after that my computer simply rejects the Iphone and nothing happens. The Iphone doesn't spin or try to reboot even! .
WHAT to do? I got it today.When you say it ignores your iPhone, do you mean it does not appear in iTunes if you launch iTunes? Or it does not appear in Finder? Or does not appear in iPhoto? Or you get an error message?
-
HT1476 My iPod touch won't charge with the USB cable.
For some reason my iPod touch (4th gen) will not charge when I plug it in with my USB cable in my pc. No symbol on the front, nothing. Any ideas?
Thanks or any help. Oh yeah, the pc CAN sense the device, it shows up on iTunes.For some reason my iPod touch (4th gen) will not charge when I plug it in with my USB cable in my pc. No symbol on the front, nothing. Any ideas?
Thanks or any help. Oh yeah, the pc CAN sense the device, it shows up on iTunes. -
Can I charge my iphone4s in the cpu with the usb cable?
I've been trying to charge my phone at my work with the USB cable and the cpu but I can't. are there any settings on this since when ever I get home and charge my phone there is no other problems.
Why don't you contact your IT department?
-
How do I scan and email documents on my canon mx870? I have a MAC OS X 10.7.5 and it is connected with a usb cable to the printer. Thank you so much!
Hi, I have 10.6.8 and an HP printer so it may be slightly different but I'll give it my best shot:
Go to System Preferences.
Click on "Print & Fax"
Near the top of that page you should see "Print" and "Scan" options. Click "Scan"
A button appears that says "open scanner"
The settings are different between the different scanner models so I'm not sure what the next window will look like, but it should be pretty straightforward from there. It will scan to a JPEG image which you can attach to an email. I hope that helps! Let me know if there's anything ense I can help with. -
How to create a window with its own window border other than the local system window border?
How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane.
In JavaSE, there seems to have the paintComponent() method for the JFrame to realize the effect.Not sure why your code is doing that. I usually use an ObjectProperty<Point2D> to hold the initial coordinates of the mouse press, and set it to null on a mouse release. That seems to avoid the dragging being confused by mouse interaction with other nodes.
import javafx.application.Application;
import javafx.application.Platform;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.collections.FXCollections;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ChoiceBox;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.AnchorPane;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
import javafx.stage.Window;
public class CustomBorderExample extends Application {
@Override
public void start(Stage primaryStage) {
AnchorPane root = new AnchorPane();
root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
enableDragging(root);
StackPane mainContainer = new StackPane();
AnchorPane.setTopAnchor(mainContainer, 5.0);
AnchorPane.setLeftAnchor(mainContainer, 5.0);
AnchorPane.setRightAnchor(mainContainer, 5.0);
AnchorPane.setBottomAnchor(mainContainer, 5.0);
mainContainer.setStyle("-fx-background-color: aliceblue;");
root.getChildren().add(mainContainer);
primaryStage.initStyle(StageStyle.TRANSPARENT);
final ChoiceBox<String> choiceBox = new ChoiceBox<>(FXCollections.observableArrayList("Item 1", "Item 2", "Item 3"));
final Button closeButton = new Button("Close");
VBox vbox = new VBox(10);
vbox.setAlignment(Pos.CENTER);
vbox.getChildren().addAll(choiceBox, closeButton);
mainContainer.getChildren().add(vbox);
closeButton.setOnAction(new EventHandler<ActionEvent>() {
@Override
public void handle(ActionEvent event) {
Platform.exit();
primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT));
primaryStage.show();
private void enableDragging(final Node n) {
final ObjectProperty<Point2D> mouseAnchor = new SimpleObjectProperty<>(null);
n.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent event) {
mouseAnchor.set(new Point2D(event.getX(), event.getY()));
n.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent event) {
mouseAnchor.set(null);
n.addEventHandler(MouseEvent.MOUSE_DRAGGED, new EventHandler<MouseEvent>() {
@Override
public void handle(MouseEvent event) {
Point2D anchor = mouseAnchor.get();
Scene scene = n.getScene();
Window window = null ;
if (scene != null) {
window = scene.getWindow();
if (anchor != null && window != null) {
double deltaX = event.getX()-anchor.getX();
double deltaY = event.getY()-anchor.getY();
window.setX(window.getX()+deltaX);
window.setY(window.getY()+deltaY);
public static void main(String[] args) {
launch(args); -
My apple tv3, serial no. C07JWBZ9DRHN is not powering on. Connected with Computer, with micro USB cable with power on, it is not shown in Devices. How to rectify
You have to remove all cables before connecting to your computer with micro usb. Power is only connected when using a 3rd gen device and done after the initial connection.
http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US -
I have purchased new iphone 3gs, its usb cable and charger not working.When I plugged in usb cable to my laptop it says"usb power hub exceeded". When I use another cable I have, it works fine.But the original one not working.Any help?
Are you connecting your iPhone directly to your PC or to a USB hub?
-
IPhone 5c isn't charging. Checked the USB cable and cube and plugin. How do we fix it.wt
MY iPhone 5c wont charge. ive checked the USB cable, Cube, and plugin. How could I fix it.
Hi Sydneyreece2020,
I understand that you are experiencing issues charging your iPhone 5c. The following resource provides additional steps to those you have already attempted:
If you can’t charge your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT203030
- Matt M.
Maybe you are looking for
-
Cisco Jabber for Android on a Samsung Galaxy Xcover (GT-S5690)
Hello there, Yesterday we installed the Cisco Jabber client for Android on the Samsung Galaxy Xcover (GT-S5690) phone. First we had some issue's with one-way voice, but suddenly this problem was occured. Another problem, which is still there, is when
-
Wen copying (importing) a CD into itunes that has multiple artists or duets with a primary artist, how can I get the tracks to all appear on one album?
-
my MAc Book PRO 13" Retina display will not update. It crashes every time I try to do an update. I have sent in the information on each update but so far nothing back from Apple. Also it does not matter what I am trying to update, the operating sy
-
Newbie question: I would like to be able to feed music and radio from my macbook to a Pioneer FH-P800BT car radio via Blue tooth connection. I can connect and transfer data to the radio using its hands free mode and the "headset" option on the mac. I
-
Post to Firefox forum; Oct.2011 Re: Quicken 2007; Mac OS 10.5 Problem: can't import or download Qif format files into quicken from bofa or Chase. Mac can't recognize; how do I set preferences in Firefox (or Safari). https://support.mozilla.com/en-US/