How do we check intermediate data in Remote Cube

Hi Experts,
I want to check how the data is coming upto Remote Cube from Planning area.
Currently the flow is MPRO -> Remote Cube ->PSA (directly updates to to target , so data stored in PSA)-> Planning Layout.
Whenever I update data in the planning layout ->save-> and runs IP the data gets updated ( can check it in MPRO) .
How can i check the dat in between , also I tried to find out any docs. on the detailed mechaninsm of Remote cube but could find much .
Can anyone plz help with the detailed mechanism of Remote Cube links ?
Regards,
Rajat

Hi Rajat,
A RemoteCube is an InfoCube whose transaction data is not managed in the BW but externally. Only the structure of the RemoteCube is defined in BW. The data is read for reporting using a BAPI from another system.
Please see the discussion below for more information:
Data load in Remote Cube
More information on:
SAP RemoteCube - Modeling - SAP Library
Regards,
Ashvin

Similar Messages

How can I check the date of purchase for my MacBook Pro?

I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date.

How do I check the date stamp in the metadata???

How do I check the date stamp in the metadata of imported video? Also can I edit this info is the date was incorrect in my camera? Thanks a bunch

SpideyWhitey wrote:
How do I check the date stamp in the metadata of imported video? Also can I edit this info is the date was incorrect in my camera?
ctrl-click on clip, choose 'Adjust Clip Date and Time'

How do I check my data useage?

I have looked all over my phone and cannot find where to check my data useage, phone timers to see how long i talked to a certain number, how many e-mails or text messages were sent.
I wanted to know my data useage because I use the Wifi when I'm at home and I wanted to run Pandora when I slept and didn't know if it would run off my wifi or my data. The phone said data useage charges still apply but I didn't know what my current useage was first off then secondly if my wifi would cover it or not.
If anybody knows either or both that would be great.
Thanks,
Rebecca

Hey Rebecca, you get an app in AppWorld, named DataMonitor or Usage Monitor
http://appworld.blackberry.com/webstore/content/14626/?lang=en
http://appworld.blackberry.com/webstore/content/56020/?lang=en
There are a few others as well.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can i check the data Of the phone throug cpmputer

I have a data in my computer, and i want to check the data of hand Phone, and if there are data missing to repar that data .(the data are numbers ).
I am new in labview somone can help me

This is not an easy thing to do. I just happened to be surfing the web for information about my nokia. Low and behold I came across a site devoted to hacking the phone. It had plans for cables and the basics of the communication protocol. The point I am trying to make is that you will need to surf the web for information about setting up communication to your phone. Each phone is different and each manufacturer can use whatever protocol they want. Once you have than info, we can then give you advice about implementing it in LabVIEW.

How can i check the data Of the phone and repar it

Thank you jeremy to replaying me , i forget to informe you,i already initialyze the phone, i am now how can i chek the data data of phone and repar the missing data(Read,write)
The data are Numbers.
i am new in Labview someone can help me withe sample.

I do this type of thing for a living, so I am restricted (by contract) in what I can say. Therefore this answer will be sufficiently general to help you get started but without doing the work for free.
Here goes;
You will have to find out at least three SETS of details.
1) Find out what physical interface to the phone is. By this I mean what type of connector do you need to plug into the phone, What type of signals are transfered back and forth, and how they are used.
2) Determine the protocol used. This is the actual commands and response that can be sent to the phone and are returned by it. Get all of the details.
3) Determine the what functionality is support by the phone that is usefull to you. This would be things liked, "How do
I get a list of all the numbers", how do I modify a number", etc.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can i check my data usage on ipad mini

HI,i cant check my data usage on my ipad mini after install my ios 7

When I check usage it gives me sent and received but not on a monthly basis. Just a number.
On the cellular data option, when I click on ‘view account’ I get a message that says my account does not support the view account feature.

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

How to recover selectively deleted data in Transaction cube ?

hi Experts,
We load data in transaction cube from manual entry layout, flat file source as well and then subsequently to basic cube.
Selective deletion has been done in transactin cube and corresponding basic cube without giving proper selection condition. Therefore all the actual data for the month was deleted.
How can we recover all the months data ??
Its highly importantto recover the data as soon as possible. Quick reply will be really appreciated.
Thanks in advance,
Somenath

Hello
How r u ?
Is there any ODS or PSA inbetween, If yes then you can load the Data from them again. Otherwise you have to load the data again.
Best Regards....
Sankar Kumar
+91 98403 47141

How to make use of 3EC_CS_1R for remote cube.

hi all,
I have activated the 3EC_CS_1A for consolidation reports but would like to use 3EC_CS_1R DataSource for remote cube, we have not installed SEM-BCS on the BI system, when trying to use the 3EC_CS_1R on the BI system, it complaints the DataSource can only be used by SEM-BCS. what is the best way to utilise this DataSource?
do I need to install SEM-BCS in order to use this DataSource? Can I just install BCS component only?
I am slightly confused as where SEM-BCS should be installed, on BI or ECC system?
cheers.
Message was edited by: Joe
Joe Wong

no longer relevant

How can we check the data already exists in database

hi friends
i am trying create one procedure to add customers in database with customer id as input parameter..but if in the database customer detail already exists than i would like to update that detail and if its not in the database than i would like to add that detail in the databse...how could i do this ...
any help wpould be appreciate
thanks
rommy

Hi,
If your requirement is to insert in one table and if the record exists insert into other table the merge statement doesn't work
Example (please check the column name and parameter names). I don't put commit or rollback because I don't know if you control the transaction inside this procedure or outside it.
CREATE OR REPLACE PROCEDURE add_cust(I_CUST_ID        IN VARCHAR2,
                                     I_CUST_F_NAME    IN VARCHAR2,
                                     I_CUST_L_NAME    IN VARCHAR2,
                                     I_CUST_ADD       IN VARCHAR2,
                                     I_CUST_CITY      IN VARCHAR2,
                                     I_CUST_STATE     IN VARCHAR2,
                                     I_CUST_ZIP       IN VARCHAR2,
                                     I_CUST_DOB       IN DATE,
                                     I_CUST_          IN VARCHAR2,
                                     I_CUST_ACCT_TYPE IN VARCHAR2,
                                     I_START_BAL      IN NUMBER) IS
BEGIN
   INSERT INTO CUSTOMERS C
      (CUST_ID,
       CUST_F_NAME,
       CUST_L_NAME,
       CUST_ADD,
       CUST_CITY,
       CUST_STATE,
       CUST_ZIP,
       CUST_DOB,
       CUST_)
   VALUES
      (I_CUST_ID,
       I_CUST_F_NAME,
       I_CUST_L_NAME,
       I_CUST_ADD,
       I_CUST_CITY,
       I_CUST_STATE,
       I_CUST_ZIP,
       I_CUST_DOB,
       I_CUST_);
EXCEPTION
   WHEN DUP_VAL_ON_INDEX THEN
      INSERT INTO CUSTOMER_ACCT
         (CUST_ID,
          CUST_ACCT_NO,
          cust_acct_type)
      VALUES
         (I_CUST_ID,
          CUST_ACCT_SEQ.NEXTVAL, -- CUST_ACCT_SEQ is a sequence, isn't?
          I_CUST_ACCT_TYPE);
END add_cust;Regards,

How do i check the data fram in LIN

Hi everyone,
I am using a LIN communication network to check the output data of my slave which is a dimmer module used in cars. There are 3 modes of operation in this module and each mode gives a different data byte response. I am reading out 3 bytes of data from the slave. Now i need to implement a code to check if these data frames read out are correct.
I am not sure how to compare 3 bytes of data in Labview ?
Can anyone help me with this ?

Is this on an iPad? If so go to settings general usage and see how much the app uses.

How can I check the data transfer rate of my FW800 port

I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?

When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.

How do I check recorded date for a clip in 08?

In 06, I had to double click a clip, and a window would pop up with the date it was shot. Before 06, it was even better, I simply had to select a clip, and in a gray bar above the timeline the day, date and time would show. Very nice. So, in 06, they made it even more of a hassle, as mentioned. I did a lot of double clicking, closing, on all my clips (I organize them by date shot).
So, with much reluctance, I have decided to try 08. Lo and Behold! I now can't find any way to show the simple date of a clip. In the right side, below the audio meters and buttons, I see a single date. January 21 2007. Don't know where that came from, as the first clip is earlier than that.
Any ideas? I already bought FCExpress 4, but it's way more involved for me to deal with now. I'm way behind on my movie making...I will have to go back to HD6 I guess if no one has an answer.
Help?

thanks, that works nicely. However, every single clip has the same date, January 21, 2007. Which is probably the date I dumped my clips onto my mac. The clips range over a few months prior to that.
I hope to heck this is not supposed to work like this, is it? Every version prior to 08 the clip dates came in just fine.
I did a quick search for this problem in the forums, and saw a few postings, but nothing about a solution. This will truly make 08 a complete waste of code to me. I need to know when these clips happened for editing.
AAAGGHH! One step forward, two back. Looks like Final Cut Express is going to have to get learned!

How to get checked rows data from a table?

Hai
For displaying a check box in my table in jspx page,I created a transient Attribute , sel and select type as Boolean.Then When i drag and drop the viewObject in to my jspx page.The table cantain id,Name,Designation,Salary,sel
Then i deleted the binding in the sel column,and drop a Select Boolean checkBox in to that column.Then in the property inspector i bind the value as #{row.sel} for checkbox..
In my table suppose there are 5 rows..I checked only 3 of them.When i pressed a button,the corresponding id 's should be fetched from the checked rows in the table and i want to show some more details corresponding to that id 's in to another table in the jspx page.I am using jdev 11

Hi,
So if I get you correct this time, you do not want to select the rows by clicking on the table row but rather by selecting the checkbox you created. Correct? Sorry, the earlier confusion is due to me "thinking in Trinidad". Anyway, you can then set the table's rowSelection as None, since you won't be selecting the row that way. Try the code below.
public String doSomething() {
 List<Row> rows = getAllRows(getTable1());
 for (Row row : rows) {
 if ((Boolean)row.getAttribute("sel")) { // Check if it's true which (should) indicate the checkbox as being selected
 System.out.println(row.getAttribute("id")); // Your selected id based on the checkbox you selected.
public List<Row> getAllRows(RichTable table) {
 List<Row> rowList = new ArrayList<Row>();
 Row row = null;
 FacesCtrlHierNodeBinding rwData = null;
 int total = table.getRowCount();
 for (int i = 0; i < total; i++) {
 rwData = (FacesCtrlHierNodeBinding)table.getRowData(i);
 if (rwData != null) {
 row = rwData.getRow();
 rowList.add(row);
 return rowList;
}Some points to take note. The getAllRows method loops through the whole VO. So if you have 10,000 rows, it loops 10,000 times. If you are dealing with large records and/or want to optimize the code, you'll need to loop through the "displayed rows" only. For that, you'll need to tweak the code.
Regards,
Chan Kelwin

How do we check intermediate data in Remote Cube

Similar Messages

Maybe you are looking for