How do we create souce system in BI

Hi
I want to configure our ides system as source system in BI , Can anyone give me certain links which gives the procedure of creating source system.
Thanks Regards
MA.Sreenivasan

hi,
There are two ways to create a source system for R/3
1.Automatic
2.Manually
Before going to manuall method you are suppose to create RFC Destination for R/3 system in the BW System.
Now In the manual creation give the RFC,Source system name and Logical system name details.
you can check out the following links:
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
http://help.sap.com/saphelp_nw2004s/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
Thanks
Lavanya

Similar Messages

How Can I create HTTP System in EP ?

Hi.
We have Simple web server with basic authentication (userid/password) and we want to integrate this page into portal using user mapping.
How can I do that ?
I try to create HTTP system in system configuration but There is no URL information in HTTP system template. How can I create system and iview for that ?
Regards, Arnold.

Hi Senthil.
When we connect webserver, we use this URL "http://www.mysales.net".
At that time, Browser show "Basic Authentication" Box and We type userid, password.
Would you write for me what I have to do in properties.
All properties seemed to be related is
1. Authentication Method
2. Authentication Type
3. Authentication URL
4. URL Parameter for Password
5. URL Parameter for User Name
Regards, Arnold.

How can i create source system in BI

Hi gurus,
I am using BI 7.0, its SRM addon.
in that i used source sytem sub functional for creating flatfile.
there i got folder like BI, SAP, EXTERNAL SYSTEM, FILE, DB CONNECT, UD CONNECT, WEBSERVICE.
so i trying to create PC souce sytem by right click on FILE folder,
it popups window with
Logical system nae---i have given current client
type and release---What is that?? which one i have to select...it shows as ORA, TLF, XPD.
I dont know for flat file source sytem why they are asking the above stuff, even we select ORA it shows error as <b>"source system has same name as BI"</b>
pls hep me out on creation of the source system'
pls reply as early as possible
<b>if anyone unable to understand pls tell me</b>
Thanks in Advance

Hi Dae,
Thanks for reply, i will give points tp you, before that let me know the below one.
I am trying to load master data then Transaction data to cube from flat file.
For that I have created infoObjects, insource with those objects, and infocube.
now how can i give the connections in between them like as 3.X, let me know with steps for loading Master and transaction data to Cube.
Thanks in advance

How Do I Create Default System Configurations for On- and Off-Dock?

I recently purchased a T510 laptop with WIndows 7 Professional 64-bit and a Series 3 minidock. I would like two create two default system configurations (namely specifying active montiors, screen resolutions, networking options, and power management). I'd also like the laptop to detect the presence or absence of the dock and automatically switch accordingly. How can I do this? Thank you.

Dear DavidLeon65,
Good afternoon. I am sorry to learn of the difficulties you are experiencing with the bluetooth connection in your car. I know this can be frustrating. It would be my pleasure to address your bluetooth concerns.
When the bluetooth connection drops out, is the phone near you? Also, do you have Wi-Fi turned on? If so, please turn off Wi-Fi, then test. What software version do you have? For directions on how to check the software verison on your phone, click http://vz.to/SrMyDh
Thank You,
MichelleS_VZW
VZW Support
Follow us on Twitter @VZWSUPPORT

How can I create a system backup in Solaris 10?

Hello,
sorry about my English.
I need to create a image of entire disk or a system backup. I think use "ufsdump" but I'm not sure. Can I create a backup of whole disk with "ufsdump" command? Are there any application to do it.?
I've got a Solaris 10.
Thank.
Alejandro.

If you want to create an image of the entire disk, then `dd' is an option. But you can also use ufsdump to create an image of a filesystem running on that disk, but you need to do that for every filesystem on the disk and please keep a copy of you vtoc for the future if you need to restore everything.
On the other hand you make me thing about someone who wants to clone machines and then a Flash Archive can also be an option. Please keep in mind to ask the question in the future instead of conformation of your answer ;-)

HOW DO I CREATE A SYSTEM TO CONTROL BOOKINGS

Hi there,
I've designed a hotel's website and now I wanted to design a system to control bookings in that, on the bookings page there would be a chart showing the varieties of rooms available and also the chart must also indicate the rooms already booked once the user books for one.(the indicator can be in form of a color, to differentiate the ones booked from the ones not booked). But now the main problem is that I'm new to Dreamweaver application development and I don't know where to start from, I'm stuck and I don't know which tools to apply. Plz somebody help

But now the main problem is that I'm new to Dreamweaver application development
Such applications are by nature pretty complex and complicated to develop, so if I were you, I´d rather integrate existing room booking applications such as MRBS

How to create a system recovery USB drive?

My U845-S406 crashes every 15 minutes with a BSOD referencing iastor.sys.
Multiple diagnostics say it is all good.
Multiple virus softwares say it is clean.
It crashes even quicker in safe mode.
I have the latest Toshiba raid drivers, but updated to a more recent Intel set. The error changes to iastora.sys, and goes back to iastor.sys when I switch back to the Toshiba drivers.
I booted holding down 0, and told it to restore; but it promptly crashes.
I made a W7 disk and tried to load it, but it promptly crashes.
As a last resort before throwing the computer out, I want to create a system recovery USB drive, format the harddrive and try recovering from the USB; but I don't have the Toshiba Recovery Media Creator (or any Toshiba software at all...) I downloaded a copy and ran it, but it says I don't have a HDD Recovery Area.
I know I have one because 1) I can access it by hold down 0, and 2)Partition Wizard showes it.
So, how can I create a system recover USB drive (or make Recovery Media Creator find the HDD recovery Area...)
Interestingly, the other day it spent 90 minutes installing a W7 update without a problem, but crashed immediately when done. Maybe that means something.

Satellite U845-S406
Downloads here.
Please zip up a few of the corresponding *.dmp files from the C:\Windows\Minidump folder and attach them to your reply.
So the procedure in the section Creating recovery media (p. 53 in the User's Guide) doesn't work? Exactly where does it go wrong?
Satellite/Satellite Pro U800W Series User’s Guide
-Jerry

How to create a system object in portal that points to a web dispatcher

Hi,
How do we create a system object in the portal for a web dispatcher? The web dispatcher in turn points to an ECC system. The path for communication is EP>Web Dispatcher>ECC
Regards,
Sridevi

Hi,
Connection test for the following succeeded:
1. SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Checks if the host name of the server can be resolved.
6. Pings the WAS ping service; works only if the service is activated on the ABAP WAS.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (mtw02spwp02:80)
5. The host name mtw02spwp02 was resolved successfully.
6. The Web AS ping service http://mtw02spwp02:80/sap/bc/ping was not pinged successfully. If the ping service is not activated on the Web AS, you can try to call the ping service manually.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/bsp/sap was obtained successfully.
2. ITS Connection
Test Details:
The test consists of the following steps:
1. Checks the validity of system ID in the system object.
2. Checks if the system can be retrieved from the PCD.
3. Check whether the system object has a valid system alias
4. Check whether a SAP system is defined in the system object
5. Validate the following parameters: ITS protocol; ITS host name
6. Checks if the host name of the server can be resolved.
7. Checks HTTP/S connectivity to the defined back-end application
Results
1. The system ID is valid
2. The system was retrieved.
3. Retrieval of the default alias was successful
4. The system object represents an SAP system
5. The following parameters are valid: ITS Protocol (http) ITS Host Name (mtw02spwp02:80)
6. The host name mtw02spwp02 was resolved successfully.
7. An HTTP/S connection to http://mtw02spwp02:80/sap/bc/gui/sap/its/webgui was obtained successfully.
Next test for SSO failed:
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
Regards,
Sridevi

Creating File System in SOLARIS

Hi Everyone,
We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
We'll appreciate your answers. thank you.
Regards,
Eco

> We installed SOLARIS in SunFire server. There are 3 hard disks, namely, 0, 1 and 2. Default is zero. We formatted the disk 1 and 2 and now we're having problem creating a file system. Every time we log in to the server we automatically go to disk zero (0), which is the default. How can we create file system in disk 1 and 2?
newfs?
I'm not sure what you mean with "we automatically go to disk zero..".
> We'll appreciate your answers. thank you.
I suggest you take a Solaris class; no offense but if you have no clue how to administer your operating system running a SAP installation on top can be very tedious.
Markus
Edited by: Markus Doehr on Sep 16, 2009 11:16 AM

Creating webdynpro system

Hi,
How can I create Webdynpro system in EP6.0??
Your help is highly appreciated.....
thanks,
sriram.

Hi Sree ram,
We generally create a 'dedicated R/3 System' or any other backend system in the portal and use that system for accesing WebDynpro applications. In the created system, specify the WAS host name and the WAS protocol.
WAS hostname :<host>.<domain>:<port>
WAS protocol : http
Or if your portal is installed on the same WAS server where your WD application runs, then you can directly use the default system available - SAP_LocalSystem.
Hope this helps,
Best Regards,
Nibu.

How do I create an archive system for a blog created with a custom app?

I had to create a blog using a custom app, because I needed an image to show up in the list view (a feature I can't believe does not exist in the blog module). Anyways, I am wondering how can I create an archive system? Do I need to create categories for each month/year and then classify the post each time we create one. Then manually create links each month to pages that filters listing by that category? This is the system I tried, but I was wondering if there was a better way.
Also, I would like to have a sidebar that shows all the authors/contributors of the blogs and have a count under their photo that shows how many blogs they have contributed to, and have this update dynamically each time they create a new post. I was wondering if a data source tag is the way to do this but I don't have enough information on how the data source tag even works, to really know how to do this.
I have searched google for hours, and even signed up for BC gurus tutorials with no real luck. I thought BC gurus was going to have the answer but it wasn't quite detailed enough. Any help would be much appreciated. Thanks!

You can use classifications but there is no auto feature to archive like that on web apps.
In terms of the blog, Like I have said to everyone that has posted about blog preview images:
http://www.prettypollution.com.au/business-catalyst-blog
Just one example of an image at the start of the blog post rendering out, not hard at all.

PI 7.11 - How to create a System Error in SXMB_MONI using a Java Mapping

Hi
We ve go a Java Mapping in a File-to-HTTP Scenario. It works perfect except of one error case: if an empty source file or a source file with the wrong structure is delivered. In this case our Java Mapping forwards an empty payload to the HTTP channel. So, for PI is the mapping successful.
I'd like to recognize this case and invoke a system error in the SXMB_MONI, so that this mapping will be stopped and our alerting concept informs the users. I know, how to recognize the case in Java but need to know how to create the System Error Status in the PI System.
Thanks in advance
Michael

Hi Michael,
Please refer here for the mapping API description:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/package-summary.html
You can use the StreamTransformationException exception describet there to raise an error from your Java mapping. Direct link:
http://help.sap.com/javadocs/NW04S/SPS09/pi/com/sap/aii/mapping/api/StreamTransformationException.html
You might also consider using the "Empty-File Handling" option in sender file CC to avoid processing empty files by PI.
Hope this helps,
Greg

How to find Installation Number in R3 to create Technical system in XI.

Hi,
how to find Installation Number in R3 to create Technical system in XI. can you please help me out.
thanks
siva.

Hi Siva,
Host name you can find at same location. Not sure about message server port (Basis team shall be able to provide this information)....
However there is a very simple way fo creating technical system..
Check out this Michals blog...its very easy
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
Nilesh

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

How do we create souce system in BI

Similar Messages

Maybe you are looking for