How do we Create the Sorce / Destination bin..? ? ?

Hi SAP Guru's ,
while we Maintain the Movement types by Copying all the Stars * * * against our warehouse ..
we need to Maintain the Storage Bin..
How do we create it ..
Thanks and regards
Adarsh Srivastava

You can use TXN Code - LS10 for creating storage bins automatically.Before creating storage bins you should define the coordinates in the bin structure template.
Krishna

Similar Messages

How do I create a named destination in InDesign?

I want to create a hyperlink from an HTML page that will open a PDF file at a specific point. I'm generating the PDF in InDesign CS5. How do I create the named destination (Objective2) so I can do the following?
http://preparatorychemistry.com/Bishop_Book_atoms_1_test.pdf#nameddest=Objective2

I also had this question and, seeing no response to your post, submitted my own at:
http://forums.adobe.com/message/5856231
However, I was told by Adobe that a solution is not available (below). Have you discovered anything to the contrary? I was not able to get the suggested solution by Jongware to work for me.
Having just completed a phone call with Gaurev Sethi of Adobe escalated technical support in which I shared my screen to explain and demonstrate the desire to link from an external URL to a specific location within a PDF file that has been exported from InDesign, it was determined that the desired functionality is not supported in InDesign and has been identified as a limitation of the software.
In researching alternate documentation software that supports PDF export, I discovered that Madcap Software supports this functionality in its Flare product:
http://webhelp.madcapsoftware.com/flare9/Default.htm#Nav_Links/Named_Destinations/Creating _Named_Destinations.htm
Note that linking via URL to a bookmarked location within a PDF is not supported:
http://blogs.adobe.com/tcs/2011/01/tcs-specific/linking-to-a-page-within-a-pdf-and-more.ht ml
More about parameters that can be specified to open PDF files are available here:
http://www.adobe.com/content/dam/Adobe/en/devnet/acrobat/pdfs/pdf_open_parameters.pdf
Although the above link is for a previous version of Acrobat, I could find no evidence to the contrary in the current SDK documentation.
-REMdreamtime

How we can create the batch file to download the data in from URL in ssis

hi,
any one help on one the below requirement.
i have to create one batch file to download the report(reports is in csv format) from URL...
requirement should be like this...
1. we have some reports is there in the URL..
2.when ever we execute the url, the report should be download and save it to the local folder.
3. this requirement i have to write in the batch file
should any one let me know how we can create the batch file for the above requirement.

Hi Priya.N,
If you use SQL Server Reporting Services for reporting, you can use Visakh’s suggestion to create a script file which calls Reporting Services Web Service to render a report in CSV format and save a batch file to the destination folder, and then create a
batch file to run the rs.exe utility which can executes the .rss script file. For more information, please see:
Report Server Web Service
ReportExecutionService.Render Method
rs Utility (rs.exe) (SSRS)
If you use other reporting tools, it depends on the reporting functionality and this requirement may be not achieved.
Regards,
Mike Yin
TechNet Community Support

How to automatically create the custom migration scripts after recreating SSMA project?

How to automatically create the custom data migration scripts after recreating SSMA project?
There is number of tables ( big tables with BLOBS) which I want to set up automatically to be migrated with custom migration scripts (replacing e.g. attribute named "FILE" with "TO_BLOB('') AS FILE" ).
So the question is how to open MB file (I think that it should be standard db of some destktop RDBMS) ?

Hi Roman.Pokrovskij,
According
to your description, we can use SSMA tool to migrate data from one database (including Access, Oracle and so on) to SQL Server via GUI or the scripts. There is an example about migrating Access database to SQL Server via the
custom migration scripts, you can review refer to them.
<?xml version="1.0" encoding="utf-8"?>
<ssma-script-file xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="C:\Microsoft SQL Server Migration Assistant for Access\Schemas\A2SSConsoleScriptSchema.xsd">
<config>
<output-providers>
<output-window suppress-messages="false"
destination="stdout"/>
<upgrade-project action="yes"/>
<data-migration-connection source-use-last-used="true"
target-server="target_1"/>
<progress-reporting enable="false"
report-messages="false"
report-progress="off"/>
<object-overwrite action="skip" />
</output-providers>
</config>
<servers>

<sql-server name="target_1">
<sql-server-authentication>
<server value="$SQLServerName$"/>
<database value="$SQLServerDb$"/>
<user-id value="$SQLServerUsrID$"/>
<password value="$SQLServerPassword$"/>
<encrypt value="true"/>
<trust-server-certificate value="true"/>
</sql-server-authentication>
</sql-server>
</servers>
<script-commands>
<create-new-project project-folder="$project_folder$ "
project-name="$project_name$"
overwrite-if-exists="true"/>
<connect-target-database server="target_1"/>
<load-access-database database-file="$AccessDbFolder$\$AccessDatabaseFile$"/>---

<map-schema source-schema="$AccessDatabase$" sql-server-schema="$SQLServerDb$.dbo" />


<convert-schema object-name="$AccessDatabase$"
object-type="Databases"
conversion-report-overwrite="true"
verbose="true"
report-errors="true" />


<synchronize-target object-name="$SQLServerDb$.dbo"
on-error="fail-script" />


<migrate-data object-name="$AccessDatabase$.Tables"
object-type="category"
report-errors="true"
verbose="true"/>
</script-commands>
</ssma-script-file>
There is a similar scripts about migrating Oracle database to SQL Server, you can use powershell script to automatically run the console for scripts/variable files, saved in the specified folder. For more information, review the following
article.
http://blogs.msdn.com/b/ssma/archive/2010/09/09/performing-database-migration-assessment-using-ssma-console-application.aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How can I create the recovery discs for my AIO computer? (For Windows 7 systems)

Q.: How can I create the recovery discs for my MSI laptop/AIO computer? (For Windows 7 systems)
A.:
1. Locate the "MSI BurnRecovery" shortcut on your desktop or start menu. Run this program. (Note: If UAC is enabled, press "Yes" to allow the program to run.
2. MSI BurnRecovery will prepare the files. This process may take a few minutes.
3. Click on "Next" to continue.
4. Click on "Advanced".
5. Click on "Create an ISO file for the recovery disc".
6. Select the destination where you want to create the ISO files. (Default is the D: drive)
7. The program will now create the ISO files. This process may take up to 20 minutes.
8. Click on "Finish". Make sure the box is unchecked.
9. Browse to the location of the ISO files. Double-click the recovery_dvd file. (Note: Depending on your system, you will have 1-3 recovery_dvd files)
10. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
11. After burn is complete, click on "Close".
12. Double-click the recovery_dvd2 file.
13. Insert a blank DVD (If the AutoPlay window pops-up, close it). Click on "Burn". It is also recommended to check the box to verify disc after burning.
14. After burn is complete, click on "Close". Recovery disc creation is now complete. (You can also delete the ISO files, but it is recommended to keep them)

Hi,
You can order a replacement set of Recovery Discs using the link below.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&lc=en&dlc=en
If you have any problem with this link, order them directly from HP.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Error while creating the JCO destinations

Hi All,
I am getting the following error while creating the JCO destinations.
<b>There are no message servers maintained in the associated SLD. Please contact your system administrator.</b>
Please help me in resolving this
Thanks

http://help.sap.com/saphelp_erp2005vp/helpdata/en/24/8fa93e08503614e10000000a114084/frameset.htm
Creating New Web AS ABAP Technical Systems
/*Reward if helpful
Message was edited by:
Anant
Message was edited by:
Anant

How can we create the error log in a ABAP program

Hi all,
How can we create the error log in a ABAP program
Thanks,
srinivas.

Hi,
Refer to FM's in the Function Group SBAL. For a change most of the FM's have been well documented. Also have a look at the DEMO pgms. Se38---->SBALDEMO & F4.
Regards
Raju Chitale

How can i create the exceptions in query

Hi Firends,how can i create the exceptions for key figures and charectristics and how can can i assign the colours and when we will create the variables for exceptions..
please let me know..
Assign Points surely..
regards

Hi,
Not sure i understnad your request 100%, but exceptions for key figures are created as explained in http://help.sap.com/saphelp_nw04/helpdata/en/68/253239bd1fa74ee10000000a114084/content.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/1a/615f64816311d38b170000e8284689/content.htm
Assign points if useful,
Xibi

How can I create the component like ComboBox in flashlite2.0 ?

How can I create the component like ComboBox in flashlite2.0
I'm a new man, please gave me an example!
Thanks.

I don't see anything special about the play button in MPMoviePlayerController....
the "glowing" effect icons are all standard UIBarButtonItem objects:
http://developer.apple.com/iphone/library/documentation/UIKit/Reference/UIBarBut tonItem_Class/Reference/Reference.html

How Can I create the new security answers?

How Can I create the new security answers?

Read this about how to change the security questions: http://support.apple.com/kb/HT5312
If you can't use these procedures contact Apple. See http://support.apple.com/kb/HT5699

How can i create the blue "I"-Button for the Documentation in a view

How can i create the blue "I"-Button for the documentation in a view?
I want to prepare the button with user specified Information...
and where must be create the documentation?
thanks
Edited by: DDC-TD on Apr 24, 2008 10:22 PM

you have not mentioned where do u want the " I " information button ,
1. If u want for a report , u can get the information button on selection-screen only .
if u goto se38 on the mail screen u will find a radio button for documentaion ,
when u select it and click 'create' or 'change' , an editor will open and u can document anything there ....
2. Or specify where u want info button .
thanks ,
reward points if usefull.

Could any one tell me that How can i create the service User ie j2ee SID

hi all,
In the implementation of SPNego Authentication schem in my portal system.
i want to create the service user ie .j2ee-<SID>.
<b>could any one tell me that How can i create the service User ie j2ee-<SID> in my visual administrator??</b>.
any help will be highly Appretiated .
thanks and regards.
vinit soni.

Vineet,
the user management tab opens in Read Only mode - thats why the button is coming as disabled. There is a button for switching into Edit mode - it looks like a pen / pencil on the top bar. Click on that - your "Create User" button would be enabled.
Also regarding creation of Service User via code level you can see <a href="https://www.sdn.sap.com/irj/sdn/thread?messageID=1057074">THIS</a> thread. And <a href="http://HERE">http://help.sap.com/saphelp_nw04/helpdata/en/f9/e3162ec55f4df6922d161f3785012a/frameset.htm</a>HERE[/url] is the SAP Help documentation on required permission settings.
Regards,
Shubhadip
Message was edited by:
Shubhadip Ghosh
Message was edited by:
Shubhadip Ghosh

How can we create the DBC file?

Hi all,
I am attempting to run the test_fwktutorial.jsp within the toolbox.jws/Tutorial.jpr project in Jdeveloper . We have to provide the Oracle application DB connection in the project properties ( we have to provide this as a DBC file) . How can we create the dbc file from the Database connection ? i tried to export the DB connection in Jdev , but it is getting exported to xml file rather than dbc file . Please help to fix this.

Yes, you can do that.
Put both the DBC files under dbc_files\secure folder.
You can change the dbc files from project settings and point to the desired file.
I am not sure, but maybe you need to stop JDevloper and start again for the new DBC file to take effect.

HT4075 I don't have any problems merging the documents by dragging, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I tried save and export, how can I create the file after merging?

Hi, I'm having trouble saving the documents when merging in Preview. I don't have any problems merging the pdf documents by dragging them in preview, but when I try to save and open afterwards, only the last shown doc was saved, not the combined files I wanted to merge. I've tried save and export, but none merge the documents after saving... how can I create the file (with all the pdf files) after merging?

That's a comment in the file. It has no effect at all.

How do I create the copyright symbol in photoshop CS6?

How do I create the copyright symbol in Photoshop CS6, Windows7? Alt+0169 does not work.

I just use Character Map, and Copy/Paste the © symbol.
With the Alt+ keys are you using the numerical keypad, or the numbers at the top of the QWERTY? Is NumLk ON?
Good luck,
Hunt

How do we Create the Sorce / Destination bin..? ? ?

Similar Messages

Maybe you are looking for