How do we declare a date field in the selection screen?

As an input,so that the user can give a appro date.
Thanks in advance.
Regards,
Shilpa

You can also do a select-option for a date.
select-options: s_datum for sy-datum.
REgards,
Rich Heilman

Similar Messages

Cursor on a error-data field in the Selection-Screen

Hi all,
I have a normal selection-screen in which I have 4 select-options.
I require that when user enters a wrong data in the 3rd field, the cursor should blink in that field.
I tried to use AT SELECTION-SCREEN ON fld event, but through this, the other's field input is disabled which I don't want.
What should I do?
Can I do it using SCREEN table?
Regards,
Saurabh A. Buksh

Hi Saurabd,
you could use the general event
AT SELECTION-SCREEN.
with no restriction on the fields. Then
SET CURSOR FIELD error_field.
MESSAGE Exxx...
Best regards,
Florin

F4 ( Search Help ) for date field on the selection screen

Hi Freinds,
i have used WDR_SELECT_OPTIONS In my component, i have one date field on selection screen(BUDAT), for this date field i want seach help
this is my code
create a range table for Posting Date
lt_range_table = wd_this->m_handler->create_range_table(
                                                          i_typename = 'BUDAT' ).
add Posting Date to the selection
wd_this->m_handler->add_selection_field( i_id = 'BUDAT'
     i_value_help_type = if_wd_value_help_handler=>CO_PREFIX_SEARCHHELP
                                           I_VALUE_HELP_ID = '??????'
                                           I_DESCRIPTION = 'Posting Date'
                                           it_result = lt_range_table ).
can any one help me
Thanks
Srini

hi sarbjeet
i created search help in dictionary and i used that search help in my program, but still its now working , any other ideas
Thnx
srini

ADDING A DATE FIELD IN THE OUTPUT SCREEN OF Tcode FBL1N

Hi guys..I want to add a From-->To 'DATE' field in the output screen of Tcode 'FBL1N' in the line items header part....Please tell me how to do this..??

Hi,
Unfortunately you can't add these fileds using with Settings>Layouts>Current header rows, you can only add the field Open items as on date.
Rgds
Murali. N

How to Add a new fields in the selection screen of LDB.

Hi All,
I want to add a new fields in the selection screen of LDB & then i need to select the data for that fields.
So could you please tell me for that where i need to add the code for selecting the data.
Thanks
Roli

Hi
welcome to SDN forum
If you are designing your own LDB with your own tables you can define tree structure and then the selection screen for the tables
if you wants to modify the std LDB of SAp means take the access key and to modify that code
if you add the extra field you have to modify the where conditions in the code also
see the doc
A logical database is a special ABAP/4 program which combines the contents of certain database tables. You can link a logical database to an ABAP/4 report program as an attribute. The logical database then supplies the report program with a set of hierarchically structured table lines which can be taken from different database tables.
LDB offers an easy-to-use selection screens. You can modify the pre-generated selection screen to your needs. It offers check functions to check whether user input is complete, correct, and plausible. It offers reasonable data selections. It contains central authorization checks for data base accesses. Enhancements such as improved performance immediately apply to all report programs that use the logical database.
Less coding s required to retrieve data compared to normal internel tables.
Tables used LDB are in hierarchial structure.
Mainly we used LDBs in HR Abap Programming.
Where all tables are highly inter related so LDBs can optimize the performance there.
Check this Document. All abt LDB's
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.highlightedcontent?documenturi=%2flibrary%2fabap%2fabap-code-samples%2fldb+browser.doc
GO THROUGH LINKS -
http://www.sap-basis-abap.com/saptab.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9bfa35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c6/8a15381b80436ce10000009b38f8cf/frameset.htm
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Re: **LDB**
www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_Logical_Database_FAQ.html
www.sap-img.com/abap/abap-interview-question.htm
www.sap-img.com/abap/quick-note-on-design-of-secondary-database-indexes-and-logical-databases.htm
http://help.sap.com/saphelp_nw04/helpdata/en/9f/db9b5e35c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/9f/db9bb935c111d1829f0000e829fbfe/content.htm
Gothru the blog which provides info on LDB's:
/people/srivijaya.gutala/blog/2007/03/05/why-not-logical-databases
Sample code
TABLES: SPFLI,
SFLIGHT,
SBOOK,
SCARR.
START-OF-SELECTION.
GET SPFLI.
WRITE:/ SPFLI: , SPFLI-CARRID, SPFLI-CONNID,
SPFLI-AIRPFROM, SPFLI-AIRPTO.
GET SFLIGHT.
WRITE:/ SFLIGHT: , SFLIGHT-CARRID, SFLIGHT-CONNID, SFLIGHT-FLDATE.
GET SBOOK.
WRITE:/ SBOOK: , SBOOK-CARRID, SBOOK-CONNID,
SBOOK-FLDATE, SBOOK-BOOKID.
GET SFLIGHT LATE.
WRITE:/ GET SFLIGHT LATE: , SFLIGHT-FLDATE.
Regards
anji

How to validate a select-option field on the selection- screen

Hi,
   I need to validate a selection-option field in the selection-screen.
Requirement is : i need to read each of customer number one by one and validateCan you please me in achieving this.
Best Regards
Mamatha.B

hi,
chk this sample code.
SELECT-OPTIONS : s_kunnr for kna1-kunnr.
AT SELECTION-SCREEN.
     if 'S_KUNNR-HIGH' = "condition
    "put your required validation here
     endif.
rgds
Anver
Message was edited by:
        Anversha s

Functional area(FKBER( field in the selection screen))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

Hi,
How you have filled the values?
It is 16 CHAR long.

Date validation in the selection screen

Hi
I am new to all this..so pls help me with this...
I need to validate my input field in the selection screen to have the format as YYYYMMDD i.e user is allowed to enter the date in this format only!!
Now how to validate this kind of a format??

Hi
That's INPUT format just one used to save a date, so u need to check it only.
It's the same if you used a DATS format, because its INPUT FORMAT is the same, for example, output format of SY-DATUM is DD.MM.YYYY, but input format is YYYYMMDD, so:
PARAMATERS: P_DATE LIKE SY-DATUM.
AT SELECTION-SCREEN.
IF P_DATE < SY-DATUM.
MESSAGE E208(00) 'Error'.
ENDIF.
In your case the INPUT and OUTPUT format are the same so:
PARAMATERS: P_DATE(8) TYPE N.
AT SELECTION-SCREEN.
IF P_DATE < SY-DATUM.
MESSAGE E208(00) 'Error'.
ENDIF.
Max

Clearing only a few fields in the selection-screen

Hi Folks,
I am having the following fields in the selection screen.
werks.
matnr
quantity
filename like rlgrap-file.
First time the user enters some values and executes it and comes back to the selection-screen.At this point I want <b>only matnr and quantity</b> fields in the selection-screen to be cleared.
If I use FREE MEMORY it is clearing all the fields.I want only the above mentioned fields.I don't want to set the data in the in werks as default in the program.Kindly let me know how to achieve this.
Thanks,
K.Kiran.

Hi Kiran,
You can write your code in AT-SELECTION SCREEN OUTPUT.
So when ever selection screen called you will have your variables you want cleared.
USe LOOP AT SCREEN.. there.
Regards,
Atish

Adding field in the selection-screen of a zprogram

hi gurus,
i have to add field in the selection-screen of oppurtunities. in database i have a field salesvalues, some of oppurtunity guids have this field value. first i need to add in selection-screen in this alv report. and fetch the data from ztable into required field . if the input fields of the salesvalues field id filled, then filter the global guids(from global table which had the guid values already) with this guids related to salesvalues. and if one single guid mathes to 2 values of salesvalues then concatenate 2 values with comma and display in single field. if select-options are blank then fetch all opportunity guids which have salesvalues. pls give solution.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Functional area(FKBER field in the selection screen of the report painter))

Hi,
I have a requirement to add functional area field in the selection screen for a report painter report. This report using library 1VK and table 'CCSS'. I added functional area field in the general data selection . After the execution of report with functional area field filled with value. report not giving any output. do i need to maintain any setting to achieve?
Regards,
Palani

1. Call GR22 and click "Characteristics".
2. Check FKBER and assign a position number to it.
3. Save and close the library.
4. Call your report in GRR2 and you should now see FKBER as an available characteristic.
5. Use it in the General Data Selection or as a Lead Column, as per requirement.
Or,
1. Call GR21 and create a custom library. Provide a name and description and also provide a library you can copy from (scan for the best-fit library).
2. Now follow the steps 2 through 5 above to achieve your result.
Hope this helps.
Cheers.

I have mapped the fields on the selection-screen to the BDC on transaction

I have mapped the fields on the selection-screen to the BDC on transaction F110.
When I am selecting a particular any value in select-option on the selection screen, it is giving some default value and the value given by me,for example:
Payment methods:C
but in BDC recording for F110 Payment methods:IEQC when the programs is running in foreground mode.
how can I rectify it?

This is because payment methods may be a table and what you see IEQC is actually, I for include, EQ for equal and C as your payment method. This is standard structure for ranges or select-options. You can use variable-low which will give you only C.

Maintaing a default value for a particular field in the selection screen

Hi all,
How to maintain a default value for a particular field in the Selection Screen of a Standard report
Regards
Ajay

>
ajay babu wrote:
> Hi all,
>
> How to maintain a default value for a particular field in the Selection Screen of a Standard report
>
> Regards
> Ajay
Create a variant for your standard program and assign this variant to the field 'Start with variant' while creating transaction code for the standard program in the transaction 'SE93'.
Regards
Rajesh.

Field in the selection screen as a select option with two default values

Hi All,
can anybody tell me how to put field in the selection screen with two defaul values.
for ex: selection screen the Account Group KNA1-KTOKD as a select option. The defeault value should be Y001 and Y005.
please reply ASAP. Its urgent.
Thanks in advance,
Madhu

Hi Madhu,
Since Select options are nothing but ranges, you can use the following code to add two distinct values to the select options by default.
s_ktokd-sign = 'I'.
s_ktokd-option = 'EQ'.
s_ktokd-low = 'Y001'.
append s_ktokd.
s_ktokd-low = 'Y005'.
append s_ktokd.
clear s_ktokd.
However, if you want to mention a range like all the values between these given two values to be considered then u may use,
select-options : s_ktokd for KNA1-KTOKD default 'Y001' to 'Y005'.
or
s_ktokd-sign = 'I'.
s_ktokd-option = 'BT'.
s_ktokd-low = 'Y001'.
s_ktokd-high = 'Y005'.
append s_ktokd.
Reward if helpful.

Field in the Selection Screen.

Hello Experts,
I need some info to list all the reports which uses a field in the selection screen.
For example the field SAKNR (G/L Account). If this field used in the 10 reports selection screen, then I need to display all the 10 reports.
Is it possible to get the fields used in the Sel. screen of a report.
Please give some suggestion.
Regards,
Vasanth

Hello Narendra,
Thanks for the reply.
See In a program I declared the field like this:
PARAMETERS: P_SAKNR LIKE EKKN-SAKTO.
So in this case I have to list this report name.
Hope you understand my requirement.
Thanks !!!
Vasanth

How do we declare a date field in the selection screen?

Similar Messages

Maybe you are looking for