How do we know when datafile was added to a tablespace

HI experts,
I wanted to know how do we know when datafile was added to a tablespace.
Actually i need to monitor how much space was used for a month for a tablespace
thanks in advance

Which could be turned into an external table and queried at will:
Demo of the alert log as a table at:
http://www.psoug.org/reference/externaltab.html
Just a quick note with respect to background_dump_dest for anyone starting into 11g. It is deprecated and BDUMP and UDUMP no longer exist: Read the docs.

Similar Messages

Problems with DUPLICATE DATABASE when datafile was added after full backup

Hi,
I'm facing a problem when performing database duplication with the RMAN duplicate database command on a 10g database. If I preform the duplication from a full backup that is missing a datafile which was added to the database after the full backup, I get the following error message:
Starting restore at 10-10-2009 18:00:38
released channel: t1
released channel: t2
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/10/2009 18:00:39
RMAN-03015: error occurred in stored script Memory Script
RMAN-06026: some targets not found - aborting restore
RMAN-06100: no channel to restore a backup or copy of datafile 43The redo log which was CURRENTat the time of the datafile's 43 creation is also available in the backups. It seems like RMAN can't use the information from the archived redo logs to reconstruct the contents of datafile 43. I suppose that because the failure is reported already in the RESTORE and not in the RECOVER phase, so the archived redo logs aren't even accessed yet. I get the same message even if I make a separate backup of datafile 43 (so a backup that is not in the same backupset as the backup of all other datafiles).
From the script the duplicate command produces, I guess that RMAN reads the contents of the source database's controlfile and tries to get a backup which contains all the datafiles to restore them on the auxiliary database - if such a backup is not found, it fails.
Of course if I try to perform a restore/recover of the source database it works without problems:
RMAN> restore database;
Starting restore at 13.10.09
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
creating datafile fno=43 name=F:\ORA10\ORADATA\SOVDEV\SOMEDATAFILE01.DBF
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to F:\ORA10\ORADATA\SOVDEV\SYSTEM01.DBF
.....The datafile 43 is recreated and then redo is applied over.
So, does anyone know if duplicate database can't use archived redo logs to recreate the contents of a datafile as a normal restore/recover does? If it's so, then it means it's necessary to perform a full database backup before every run of duplicate database if a datafile was added after such a backup.
Thanks in advance for any answers.
Regards,
Jure

Hi Jure,
I have hit exactly the same problem during duplication.
Because we backup the archive logs every 6 hours with rman I added an extra run block to this script.
run
backup incremental level 0
format 'bk_%d_%s_%p_%t'
filesperset 4
database not backed up;
(I also than hit a bug in the catalog which was solved by patching up the catalog dbs from 11.1.0.6 to 11.1.0.7.)
This will narrow down the datafile not being part of any rman backup to 6 hours while skipping datafiles for which a backup already exists.
Regards,
Tycho

I had water damage to my iphone5 when I was deployed w/ the military overseas. How can I find out what saved to icloud and how to see where my photos are. I don't know when it was able to back up as wi fi was pretty sketchy. please advise. thx in advance

I had water damage to my iphone5 when I was deployed w/ the military overseas. How can I find out what saved to icloud and how to see where my photos are. I don't know when it was able to back up as wi fi was pretty sketchy. please advise. thx in advance
My iphone is toast, I know I checked on icloud and see my emails from the day before it happened. Can I see when and what my phone backed up through itunes or icloud?
Please please help i am lost.

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

I purchased the teacher and student lightroom 5. I put in my code and uploaded my evidence to show that I am a teacher. I am guessing it was sent through to someone. How do I know when I can use the software? I don't understand what to do next.

Please refer below link for more information
Education FAQ

I am using a WD external hard drive for backing up my laptop with Time Machine, but I have to do it manually. How do I know when it has finished the back up? How long should it take?

I am using an external WD hard drive for backing up my laptop. I have to do it manually, so I can't set Time Machine to just do it for me. How do I know when it is done backing up? How long should this take?

Triple-click anywhere in the line below to select it:
tmutil compare -E
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
The command will take at least a few minutes to run. Eventually some lines of output will appear below what you entered.
Each line that begins with a plus sign (“+”) represents a file that has been added to the source volume since the last snapshot was taken. These files have not been backed up yet.
Each line that begins with an exclamation point (“!”) represents a file that has changed on the source volume. These files have been backed up, but not in their present state.
Each line that begins with a minus sign (“-“) represents a file that has been removed from the source volume.
At the end of the output, you’ll get some lines like the following:
Added:
Removed:
Changed:
These lines show the total amount of data added, removed, or changed on the source(s) since the last snapshot.

How do you know when you have the latest software updates

how do you know when yo have the lastest software updates on your older IPOD? I just purchased on home theater to replace one, Samsung, I was assured that the system would run my IPOD. I've sync'd my IPOD to my computer a number of times before the purchase and since. Samsung is telling me that I need to update my IPOD. My ITunes keeps telling me there aren't any updates out there.

Read the top of the page I gave you the link to. The
latest update that you do not have only added more
support for the Shuffle. If you are not having any
problems leave as is. If you have problems then
download the update. It will ask you for your user
ID. Once you install the updater, your computer will
reboot.
This is what it says at the download site.. iPod Software 1.0
* iPod with video
Everything is working fine Barb with the ipod but I was under the assumption that if an update is available, I should download it...

How do I know when my unlock has been processed?

Hi all,
Sorry for what's probably a dumb question, but I can't find an answer anywhere.
I have an AT&T iPhone 4S, and I recently called them to request an unlock. Since it was on a business account while under contract, they had to submit a request directly to Apple instead of just using the web form. However, they told me that they never received anything from Apple during the process that would indicate that I'll be notified once the request has been approved. So from my understanding, completing the process on my end involves tethering to iTunes and restoring the phone - but how will I know when it's actually time for me to do that?
I should add: I am no longer with AT&T, or in touch with anyone else who is still on the account that I had been part of. So if anyone else on that old account gets notified, I won't know. And since I'm not with AT&T myself, I feel doubtful that they'd let me know.
Thanks for your help!

Apple does Not Unlock phones... This is done by the Carrier.
About Unlocking...
http://support.apple.com/kb/HT5014
Also See this AT&T Unlock Eligibility

How can I know when I reached space limitations

Hi, I want to know what happens when an enviorment reachs its space limitation.
I know that space available is 30mb per user and the only way to know how much space you've consumed is by calculations about the number of registers.
But I'd like to know how can I know when I reached that limit and what is the procediment to buy more space (overall how much time it takes).
Every comment will be appreciated.
Thank you.
Edited by: linkln on 13/08/2010 10:29 AM

We recently instituted a new CRM On Demand storage policy and we realize it hasn’t been disseminated as broadly as it should be. This new policy is significantly more generous than the former policy at no additional charge. We used to offer 30MB pooled storage for Multi-tenant, 45MB for Single-Tenant Standard Edition, and 60MB for Single-Tenant Enterprise Edition (this space covered standard records and attachments).
Customers often think in terms of records and not MB, especially when they are considering importing x million contacts or other records. An average record uses 2KB. We have made the following changes:
1)     Multi-tenant. Converted the 30MB to 15,000 records. Added 100MB per user for attachments;
2)     Single-Tenant Standard edition. Converted the 45MB to 22,500 records. Added 150MB per user for attachments;
3)     Single-Tenant Enterprise edition. More than doubled the 60MB to 70,000 records. Added 200MB per user for attachments;
In summary the new limits are:
Storage Allotment by CRM OD Offering______     Records per User_____Megabytes for Attachments to Records per User
Multi-Tenant___________________________15,000 ____________100
Single-Tenant Standard Edition_____________22,500 ____________150
Single-Tenant Enterprise Edition____________70,000 ____________200
A couple of additional notes:
•     When counting records we are only counting primary data records. Meta-data and configuration records don’t count against the limit.
•     Usage is pooled as before (i.e. a customer receives the amount of storage per subscriber as listed above multiplied by number of subscribers).
Edited by: bobb on Aug 13, 2010 10:57 AM
Edited by: bobb on Aug 13, 2010 11:03 AM

HT4436 how to track down when icloud was downloaded to a ipod

how to track down when icloud was downloaded to a ipod

You don't "download" iCloud. It is built-in to devices running iOS5 or above.
You set iCloud up on iPhones, iPads and iPod touch. You should know when you set it up, there is no record stored anywhere of when you did that.

My iphone has been stolen so i went to icloud and did the remote wipe/erase. but it says offline pending erase. how will i know when my pictures and all other data have been erased?

help
my iphone has been stolen i did the auto erase online but my phone is offline pending erase i cant bare to think someone has acces to my phots and pictures. how will i know when the erase has been succesful

Thank you again for all of your help!! I really appreciate it!
I think I am following -- I was able to upload to my iPhoto and all photos and videos are there that is a plus! I tried to create an Event in my iPhoto and put all of my photos in that event but for some reason, now my iTunes it not recognizing that Event in my iPhoto. It is not allowing me to import just that event at the moment but I may be doing something wrong. At least all of my pics and vids are in iPhoto so that is a plus and I know they are at least saved somewhere. Just for some reason, my iTunes it not locating the event that I created with only those photos.
Thank you for letting me know about my contacts! How do I know if I have the contacts app?
Also, I had no clue that my iCloud could be backed up via cellular data! However, is this a new feature with the most updated iOS?? Unforutnatly I am like 2 iOS updates behind because I don't have enough storage on my phone. I still get the notification that my phone needs to be plugged in and connected to wifi in order to back up to the cloud :-(
How can I sync using USB? Right now when i click on the info tab for my iPhone in my iTunes this is the answer that I get -- I am a little unclear as to what it means.
Sync Contacts:
Your contacts are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone
Sync Calendars:
Your calendars are being synced with you iPhone over the air from iCloud. Over-the-air sync settings can be changed on you iPhone

My film has not totally downloaded, I did not realise this until it stopped 15 minutes before the end, how do I know when the rented film I have purchased has been fully downloaded. Can I retrieve anyhow

My film I rented has not fully downloaded I only realised that when it stopped 15 minutes before the end , how do I know when a film has been fully downloaded. Oi would not have thought the film would not have started unless the film was fully downloaded. The film warned me prior to tarting that I only had 48 hours to watch once starting!

I'm sorry but this is too funny to pass up.

How do I know when my battery is fully charged?

When I plug in my Nano I get the do not disconnect screen, and the little battery icon in the upper right corner is green with a plug in it.
At one time I remember seeing a big icon that was fully charged, but I don't remember how that came to be.
How do I know when my battery is fully charged?
Thanks,
Matt

it's fully charged when the green battery sign has a little plug sign in it

I have my credit card on my daughter's i pod and i needed it to set up the apple id how do i make it so she can't spend any of the money but still get free apps.? Also she has a$15 app card on there how do I know when she buys apps which payment it takes?

I put my credit card on my daughters new i pod. How do I block her from buying apps but still being able to download free apps? Also she has a $15 app card on the i pod how do i know when she buys something whitch payment it will take the visa or app card? PLEASE HELP A.S.A.P. THANK YOU

You can
Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
You can have apps purchased from more than one account. It does complicate update apps though.
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

How to find out when data was deleted from table in oracle and Who deleted that

HI Experts,
Help me for below query:
how to find out when data was deleted from table in oracle and Who deleted that ?
I did that to fidn out some data from dba_tab_modifications, but I m not sure that what timestamp shows, wether it shows for update,insert or delete time ?
SQL> select TABLE_OWNER,TABLE_NAME,INSERTS,UPDATES,DELETES,TIMESTAMP,DROP_SEGMENTS,TRUNCATED from dba_tab_modifications where TABLE_NAME='F9001';
TABLE_OWNER                    TABLE_NAME                        INSERTS    UPDATES    DELETES     TIMESTAMP         DROP_SEGMENTS TRU
PRODCTL                        F9001                                                     1683         46       2171            11-12-13 18:23:39             0                   NO
Audit is enable in my enviroment?
customer is facing the issue and data missing in the table and I told him that yes there is a delete at 11-12-13 18:23:39 in table after seeing the DELETS column and timestamp in dba_tab_modifications, but not sure I am right or not
SQL> show parameter audit
NAME                                 TYPE        VALUE
audit_file_dest                      string      /oracle/admin/pbowe/adump
audit_sys_operations                 boolean     TRUE
audit_syslog_level                   string
audit_trail                          string      DB, EXTENDED
please help
Thanks
Sam

LOGMiner --> Using LogMiner to Analyze Redo Log Files
AUDIT --> Configuring and Administering Auditing

How do I know when my backup is complete to my external hard drive

How do I know when my back up is complete to an external har drive...new user

Welcome to Apple Support Communities.
If you are using Time Machine, open , System Preferences, System, Time Machine.
It will show the status of the backup drive, including the date of the first backup, as well as the most recent.
Checkmarking the 'Show Time Machine status in the menu bar' will allow you to view the latest Time Machine backup by clicking on the icon in the menu bar, without going through System Preferences each time.
Clicking Open Time Machine Preferences... from the menubar takes you to the same Preference screen as shown above.
The first backup will take a while, up to several hours or more, because it is a complete backup of everything on your system.

How do we know when datafile was added to a tablespace

Similar Messages

Maybe you are looking for