How do we pass the Business Event Data in the EBS business Events subscription Testing?

HI,
How do we pass the Business Event Data in the EBS business Events subscription Testing?
--Khaleel

Hi,
Just to add what Dianne has said, whenever you are carrying out any configuration/ customising, you have to test all the related scenarios. For this you have to take help of the End Users who are in a better position to carry out this testing. If the affecting modules like FI, MM, SD, are many, then you also have to see how the cross-module enties are flowing.
Regards,
amit

Similar Messages

How to filter the Event Data from the EventHub when consuming data?

We know the EventHub has the filter function. I'm designing a new solution for a customer and it looks like EventHubs are great for sending and receiving our near-realtime
data. Downside is when receiving the data, we receive all data of all our devices in the world. Most of the time, our clients only want to see data of one (or a few) device. We could of course filter the data by ourselves, client side, but
this would cost a lot of bandwith.
From the
FeedBack, it said Filters will be tied to Consumer Groups. And I Check the Consumer Group Class, it has the Create Time and Update Time, but it
has no set Function,
So how to use the Consumer Group to filter Event Data during the Receiving data?
Because in our solution, we use the EventHubHost to consume data, if our service bus worker role restart, we will receive all data in the EventHub, but we only want
to receive the latest data,
If we use the EventHubHost to consume data, can we also to filter data? If yes, how to do?
Thanks very much!

Yes right,
AFAIK there isn't a filter feature for Event Hub. The only way to have now is to put a specific property inside your EventData that consumer group can check to filter if it is interested in the data or not.
Paolo.
Paolo Patierno

Premiere CS3: How can you encode xml cue point data in the chapter section of a marker for FlashVid?

Hi there,
I'm a total newb to this forum, so hello adobe premiere community! I'm perplexed by Adobes documentation on Premiere (and I'm sure I'm not the first ) anyway on the live documents page below:
http://livedocs.adobe.com/en_US/PremierePro/3.0/help.html?content=WS9390BED7-9466-46ea-A0E A-3240F1AFC36C.html
it states that:
“The cue point data in the Chapter field of a sequence marker in Adobe Premiere Pro will be encoded as Flash XML. For the XML protocol required, see Flash Help.”
Which is great…except this information doesn’t exist seemingly in either the Premiere documentation or Flash either for that matter, but as I’m interested in working with the chapter/marker area in Premiere – should I really be told to go off and search the documentation for another application, probably not! What would have been useful would have been a code snippet saying you do it like this, but of course, that would make things too easy!
Basically, I understand that in After FX you can add Flash marker information specifically for interpretation when exporting to Flash Video (i.e. name, type and parameters etc) and it suggests that you can do the same above in Premiere CS3 using some kind of concatenated string in the chapter area…it just doesn’t tell you how anywhere seemingly – WHY ADOBE!
Currently when I export markers as cue points based on the advice in the page above, anything I put in the chapter section to force Premiere to create a cue point is converted to a string, which becomes the cue point ‘name’.
This cue point name is then automatically appended to the ‘time’ the marker was inserted at and is always encoded as type ‘navigation’, with no obvious means of adding ‘parameters’ into the equation.
So (finally) does anyone know if you can insert this information into the chapter area for correct interpretation by flash (i.e. thus allowing you to choose between either 'navigation' or 'event' types, and pass as many 'parameters' as you wish etc) or are you just limited to supplying a name, and it being automatically set to the navigation type with no parameters?
I’m sorry for this long essay but at least the issue is well defined for you to answer, honestly any help you can provide what so ever would really be most appreciated!
Best regards,
Kat
PS – I have utterly no knowledge of XML either just in case you were wondering – and my only interest in XML is getting this basic information encoded into the FLV file from Premiere Pro CS3! Please help, pretty please with daisy’s!!!

Hi dradeke,
Thanks for your reply, which is indeed useful as clearly Adobe have made this task easier and less obscure in CS4 by adding simple interface functionality, however I'm stuck with using CS3 for the moment. Its not majorly a problem as the video material in question can be exported uncompressed then setup with cue points using the Flash encoder as an alternative (i.e. or even After FX CS3 also) which both provide the same features as Premiere CS4 seemingly. It is just that it would be much easier to be able to drop in simple markers whilst working with Premiere CS3, as this is what we are going to be using primarily, I just wondered if anyone knew how to invoke this in CS3 - its possible you can't, the documentation is vague at best!
However I really appreciate your response and help, thanks

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

How can I pass a Presentation Variable (Date) into a prompt

Hello
How can I pass a Presentation Variable (date) into a prompt? I seem to be able to do this successfully for a non-date value but have had no luck with a Date variable.
Here's a simplistic version of what I'm trying to do:
1. I have a Presentation Variable called startDate which is a Date that defaults to this SQL - SELECT "Reporting Dates"."Measure Date" FROM Trading WHERE "Reporting Dates"."Date Name" = 'Current'.
2. I now want to pass this variable into a prompt with SQL like this: SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date'@{startDate}{2009-04-24}'
I get this error: Datetime value @{startDate}{2009-04-24} from @{startDate}{2009-04-24} does not match the specified format.
Now I can use the exact same syntax in a filter. For example, a simple Answers request where I pick Position Date with a filter saying "Position Date"."Position Date" = date'@{startDate}{2009-04-24}' works fine.
What am I doing wrong?
Thanks!

Can you provide more information please?
1. What is the format of the first date prompt, is it YYYY-MM-DD or?
2. Which data type is Position Date."Position Date" in the physical layer, date or date time?
3. What is the column formula in the first prompt?
4. The first prompt is set to drop-down or?
5. If you are using this SQL Results in the second prompt:
SELECT "Position Date"."Position Date" FROM Trading where "Position Date"."Position Date" = date '@{startDate}{2009-04-24}'
then @{startDate} must be in YYYY-MM-DD format to work properly, otherwise (for example):
datetime value 01/01/2000 from 01/01/2000 does not match the specified format.
This doesn't work for example:
SELECT Times.time_id FROM "Normal model" where Times.time_id =date '01/01/2000'
Regards
Goran
http://108obiee.blogspot.com

How does the GR processing time affect the scheduling of the process order & the latest start date in the operation.

Hi
Can anyone explain how does the GR processing time affect the scheduling of the process order & the latest start date in the operation overview.

Hi
GR processing time means number of workdays required after receiving the material in storage.
Check this link:GR Processing time
Regards,
Anupam Sharma

Recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step

recently had to purchase a replacement phone a friend of mine had backed up the data on the lost phone to his Mac laptop how do I get that backed up data from the lost iPhone that's on his Mac laptop to my new replacement phone? Please give step by step instructions xoxoxo
And my iTunes sign in is also screwed up... It is underneath my friends email (the one with my backed up data on his Mac laptop) HOW DO I CHANGE THIS SO THAT I CAN DOWNLOAD APP's again...

I suspect unless he had some items in iCloud backup then they are gone. Connecting an iPhone to a different library from that to which it was previously connected will result in the device asking if you want to erase it.

HT1766 please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...we found the backed up data in the pc(windows 7)after entering %appdata%..pls help how to restore..thanks!God

please help...we updated ipod2 4.1 to IOS 5.1 at itunes...after it was finished only the contacts were restored...not the music & videos...iwe found the backed up data in the pc(windows 7)after entering %appdata%..pls help on how to restore...we will appreciate it very much....thanks! God bless!

The iPod backup that iTunes makes does not include synced media like app, music and videos. Thus, you wll have to resync those back to your iPod.
If necessary you can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to get the exact day date with the another date field?

Hi,
Please help me how to get the specific day of the week's date with the help of another date field.
Actually , one field(week_day) has 1,2,3,4,5,6,7 here 1--MON,2-- TUE like that.
another field has the date. based on that date, we have to go to that particular week and need to pick up the date by the above week_day. It should be in that week itself.
Thanks in advance!!
Regards,
Vissu...
Edited by: vissu on Oct 29, 2010 3:07 AM

Hi,
Something like this
SELECT TRUNC(<DATE_COLUMN>,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the particular week of the date
SELECT TRUNC(SYSDATE,'DAY')+<WEEK_NO_COLUMN> FROM <YOUR_TABLE>;for the current week
cheers
VT

How to hightlight the new inserted data in the last low of JTable?

Could somebody help me?
i am doing the e-restaurant application system .
When press the food button, the JTable will list out the order details.
When the order is long, the scroll pane will show up.
My problem is[ b] how to hightlight the new inserted data in the last low of JTable when the food button is press every time?The scroll pane will automatically scroll down the to the new insertted data.
In the List, i get the effect like this command but in the JTable how?
list.ensureIndexIsVisible(orderDetails.getSize()-1);
thank in advance.
Below is the snapshot of my coding:
DefaultTableModel model=new DefaultTableModel(cells,columnNames);
OrderModel sorter=new OrderModel(model);
JTable table=new JTable(sorter);
JScrollPane scrollPane=new JScrollPane();
scrollPane.add(table);
Object[] object={foodName, "1",price};
model.addRow(object);
sorter.fireTableDataChanged();
sorter.fireTableStructureChanged();

The right place to ask this one is "Swing Forum.
http://forum.java.sun.com/forum.jspa?forumID=57

How to change the valid from date of the bom header?

ECM is active in the system.
I want to change the valid from date of the BOM header with the help of a change number.
How can I change it?

Hello
Lets assume that, we are going to change Management for controlling Valid From date
Steps to be followed for creation of Change No
Tcode CC01 for Change No
Click on Change Master
Once you enter into Change master, maintain the description
In the Valid from Date, maintain the date from which you BOM should be current
Maintain the Status (01)
Click on Ojbect Type, maintain for which Object types is the Change no needs to be active i.e. for BOM, Rtg, etc
save the Change No
After the change no is created
Enter the Change No during the creation mode of BOM
THe system copies the Valid from date from Change No

How can I show the last amend date of the .rpt file on my report?

I want to show the last amendment date of the .rpt file on my report.
Modification date and time refer to the actual report rather than the .rpt file.
Does anyone have any suggestions? I am using version 11.2.
Thanks,
Anne-Marie

annemarier,
Have you tried the "Modification Date" or "Modification Time" fields located under the Special Fields section of the Field Explorer?
I've never used them, but they seem like good candidates.
Jason

How to copy the Planned GI date as the pricing date in Invoice

Hi!!,
For this requirement we want the price the product based on the Planned GI date and not the actual GI date...For some case when Planned GI date was early and we shipped late.It means we would be creating the Invoice later than the Planned GI date and hence the billing date would be my pricing date in the Invoice which will be the later date....
We want that the pricing should be as on Planned GI date.....is there a standard way we can accomplish this using configuration?
Helpful answers would be handsomely rewarded.
Thanks

Hi, I had a similiar reqmt but in that case we wanted the Pricing date from the Sales Order to be copied into the Billing Document Pricing Date (for the correct pricing) instead of the Actual GI Date from the Delivery to flow to the same.
We achieved this using ABAP by making a copy of the Data Transfter routine found in Data VBRK/VBRP field in the copy control and adding the required codes to it. Hope this gives you some lead.

ABAP Code for Backup the entire table data in the application server

Hello Friends,
I have to create the table data Backup and Store the entire table data in the application server and also be able to restore the data back if needed.
this should be dynamic program for any table based on the table name given on the application server.. I have developed a program for this but its having problems with the Quantity, amount. Its not writing it correctly at the application level.
ANy Suggestions on this.
Below is the program for this.
Thanks,
Ster.
* Report YWMM_TABLE_DUMP                                             *
REPORT ywmm_table_dump .
TABLES :
        dd03l.
* Type spool declaration
TYPE-POOLS:
        abap, slis.
DATA: i_table_data1 TYPE REF TO data.
DATA : it_dd03l LIKE dd03l OCCURS 0 WITH HEADER LINE.
*DATA : gt_fieldcat TYPE lvc_s_fcat.
DATA : i_fcat      TYPE STANDARD TABLE OF lvc_s_fcat,
       l_dr_line         TYPE   REF TO data,
       l_v_as4vers       TYPE as4vers.
FIELD-SYMBOLS: <f_table_data1>     TYPE STANDARD TABLE,
               <f_wa_table_data1> TYPE ANY.
SELECTION-SCREEN: BEGIN OF BLOCK bl1 WITH FRAME TITLE text-001.
PARAMETERS: rb_copy RADIOBUTTON GROUP map DEFAULT 'X',
            rb_rest RADIOBUTTON GROUP map.
SELECTION-SCREEN: END   OF BLOCK bl1.
SELECTION-SCREEN: BEGIN OF BLOCK bl2 WITH FRAME TITLE text-002.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
            p_plfld TYPE dd03l-fieldname.
SELECTION-SCREEN SKIP 1.
PARAMETERS: p_bkfile TYPE localfile OBLIGATORY.
SELECTION-SCREEN: END   OF BLOCK bl2.
PERFORM get_data.
IF rb_copy = 'X'.
PERFORM backup.
ELSEIF rb_rest = 'X'.
PERFORM database_update.
ENDIF.
*&      Form get_data
FORM get_data.
CLEAR   i_fcat.
REFRESH i_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
       EXPORTING
            i_structure_name = p_table " Table Name
       CHANGING
            ct_fieldcat      = i_fcat
       EXCEPTIONS
            OTHERS           = 1.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
    it_fieldcatalog = i_fcat
IMPORTING
    ep_table        = i_table_data1.
IF sy-subrc = 0.
    ASSIGN i_table_data1->* TO <f_table_data1>.
ELSE.
    WRITE: 'Error creating internal table'.
ENDIF.
IF rb_copy = 'X'.
    SELECT * FROM (p_table) INTO CORRESPONDING FIELDS OF
              TABLE <f_table_data1> UP TO 20 ROWS.
ELSEIF rb_rest = 'X'.
    CREATE DATA l_dr_line LIKE LINE OF <f_table_data1>.
    ASSIGN l_dr_line->* TO <f_wa_table_data1>.
*Get Data from Application Server
* Opening the dataset P_BKFILE given in the selection screen
    TRANSLATE p_bkfile TO LOWER CASE.
    OPEN DATASET p_bkfile FOR INPUT IN TEXT MODE." ENCODING DEFAULT.
    IF sy-subrc NE 0.
*    MESSAGE:
    ELSE.
      DO.
* Reading the file from application server
        READ DATASET p_bkfile INTO <f_wa_table_data1>.
        IF sy-subrc = 0.
          APPEND <f_wa_table_data1> TO <f_table_data1>.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
* Closing the dataset
      CLOSE DATASET p_bkfile.
    ENDIF.
ENDIF.
ENDFORM.                    " get_data
*&      Form backup
*       text
* --> p1        text
* <-- p2        text
FORM backup.
TRANSLATE p_bkfile TO LOWER CASE.
OPEN DATASET p_bkfile FOR OUTPUT IN TEXT MODE.
IF sy-subrc NE 0.
    WRITE: text-017.
    STOP.
ELSE.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
ENDIF.
CLOSE DATASET p_bkfile.
ENDFORM.                    " backup
*&      Form database_update
FORM database_update.
DATA : i_mara_u TYPE STANDARD TABLE OF mara WITH HEADER LINE,
         i_ekpo_u TYPE STANDARD TABLE OF ekpo WITH HEADER LINE,
         i_eban_u TYPE STANDARD TABLE OF eban WITH HEADER LINE,
         i_resb_u TYPE STANDARD TABLE OF resb WITH HEADER LINE,
         i_plpo_u TYPE STANDARD TABLE OF plpo WITH HEADER LINE,
         i_stpo_u TYPE STANDARD TABLE OF stpo WITH HEADER LINE,
         i_vbap_u TYPE STANDARD TABLE OF vbap WITH HEADER LINE,
         i_vbrp_u TYPE STANDARD TABLE OF vbrp WITH HEADER LINE,
         i_lips_u TYPE STANDARD TABLE OF lips WITH HEADER LINE,
         i_afvc_u TYPE STANDARD TABLE OF afvc WITH HEADER LINE,
         i_asmd_u TYPE STANDARD TABLE OF asmd WITH HEADER LINE,
*           i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_qmel_u TYPE STANDARD TABLE OF qmel WITH HEADER LINE,
         i_cooi_u TYPE STANDARD TABLE OF cooi WITH HEADER LINE,
         i_esll_u TYPE STANDARD TABLE OF esll WITH HEADER LINE,
         i_t165_u TYPE STANDARD TABLE OF t165 WITH HEADER LINE,
         i_t165e_u TYPE STANDARD TABLE OF t165e WITH HEADER LINE,
         i_twpko_u TYPE STANDARD TABLE OF twpko WITH HEADER LINE,
         i_tpext_u TYPE STANDARD TABLE OF tpext WITH HEADER LINE,
         i_ce4mxpa_u TYPE STANDARD TABLE OF ce4mxpa WITH HEADER LINE,
         i_ce4mxpa_acct_u TYPE STANDARD TABLE OF ce4mxpa_acct WITH
                                                         HEADER LINE,
         i_zaim_u TYPE STANDARD TABLE OF zaim WITH HEADER LINE,
         i_s012_d TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_s012_i TYPE STANDARD TABLE OF s012 WITH HEADER LINE,
         i_dummy TYPE STANDARD TABLE OF mara.
CASE p_table.
    WHEN 'MARA'.
*     Non-Key
      PERFORM move_to_table USING   <f_table_data1>
                            CHANGING i_mara_u[]
                                     i_mara_u.
      PERFORM update_table USING i_mara_u[].
ENDCASE.
ENDFORM.                    " database_update
*&      Form move_to_mara
FORM move_to_table USING    p_tab_from TYPE STANDARD TABLE
                   CHANGING p_tab_to   TYPE STANDARD TABLE
                            p_w_table.
DATA: l_wa_fcat TYPE lvc_s_fcat.
FIELD-SYMBOLS: <f_field_from> TYPE ANY,
                 <f_field_to>   TYPE ANY.
LOOP AT p_tab_from ASSIGNING <f_wa_table_data1>.
    LOOP AT i_fcat INTO l_wa_fcat.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE <f_wa_table_data1> TO <f_field_from>.
      ASSIGN COMPONENT l_wa_fcat-fieldname
     OF STRUCTURE p_w_table TO <f_field_to>.
      <f_field_to> = <f_field_from>.
    ENDLOOP.
    APPEND p_w_table TO p_tab_to.
ENDLOOP.
ENDFORM.                    " move_to_mara
*&      Form update_table
FORM update_table USING p_table_update TYPE STANDARD TABLE.
SELECT SINGLE *
    FROM dd03l
   WHERE fieldname = p_plfld
     AND tabname   = p_table
     AND keyflag   <> 'X'
     AND as4local = 'A'
     AND   as4vers = l_v_as4vers
     AND   ( comptype = 'E' OR comptype = space ).
IF sy-subrc = 0.
*   Do update
    IF NOT p_table_update IS INITIAL.
      UPDATE (p_table) FROM TABLE p_table_update.
      IF sy-subrc = 0.
        COMMIT WORK.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-003.
        STOP.
      ENDIF.
    ENDIF.
ELSE.
*delete and insert.
    IF NOT p_table_update IS INITIAL.
*      DELETE (p_table).
      IF sy-subrc = 0.
        INSERT (p_table) FROM TABLE p_table_update.
        IF sy-subrc = 0.
          COMMIT WORK.
        ELSE.
          ROLLBACK WORK.
          WRITE: text-018.
          STOP.
        ENDIF.
      ELSE.
        ROLLBACK WORK.
        WRITE: text-018.
        STOP.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.                    " update_table
Edited by: Julius Bussche on Jul 18, 2008 1:43 PM
Please use a meaningfull subject title!

ARS,
I am struggling a bit to get this.
there is a syntax error,
Field "FIELDS_INT-TYPE" is unknown. It is neither in one of thespecified tables nor defined by a "DATA" statement.
Again you have asked to move to a diffrent table. What is that table and how to build it.
    LOOP AT <f_table_data1> ASSIGNING <f_wa_table_data1>.
      LOOP AT i_fcat INTO l_fcat.
        IF l_fcat-inttype EQ 'P'.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type
              DECIMALS fields_int-decimals.
        ELSE.
          ASSIGN COMPONENT l_fcat-fieldname
              OF STRUCTURE <f_wa_table_data1> TO <f_field>
              TYPE     fields_int-type.
        ENDIF.
        " Move <f_field> to a new table and use this table for download
      ENDLOOP.
      TRANSFER <f_wa_table_data1> TO p_bkfile.
    ENDLOOP.
Ster

Get the custom fields data at the time of save

Hi,
We have added few fields in the ICWC for the complaint screen.
At the time of save i am trigering a BADI.
I would like to check the data that is entered in those fields of complaint screen.
Is there any FM which can be used to get the data from the buffer ?
I have the header GUID available to me .
Thanks.
R

Hi,
Let me elaborate a bit.
Users would create the complaints in the ICWC.We have addeded few custom fields in the complaint screen.
CRMT_CUSTOMER_H_WRKT is extended with the custom fields.
At the save i am trigerring the Partner Determination BAdi.
Here i have the complaint guid at run time.
I would like to check the data entered in the custom field in the complaint screen. Based on this i would like to determine one more partner.
My question is how can i get the custom field data in the complaint screen in this BAdi.
The FM: CRM_ORDER_READ is not returning this data.Is there any FM to get this ?
Thanks.
R.

How do we pass the Business Event Data in the EBS business Events subscription Testing?

Similar Messages

Maybe you are looking for