How do we pass the user id and password in report URL

We have one report. The URL of report is as below
https://secure-ausomxapa.crmondemand.com/OnDemand/user/analytics/saw.dll?Go&Path=%2fshared%2fCompany_30145_Shared_Folder%2fDinesh%2fuser+prompt+test&Options=rfd&Action=Prompt
I want to configure this in my custom application. Every time when the page executes it ask for username and password. Is there any way to pass the user id and password information through URL parameter?
I have come across the fact, we can pass this in URL by appending the below parameter at end of URL
&NQUser=user1&NQPassword=rock.
But some how this is not working for me, and I am getting the error message –
You are not authorized to view this page
Any thought on this?

Kdinesh,
I know to add a username when you bookmark you favourites is it ?userid={loginID}, perhaps try this instead. I've never done it for password though.
cheers
alex

Similar Messages

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

How can I hide the user name and password from the url address?

Good afternoon every body,
I have a form running with Oracle9i Developer Suite Release 2 and when I run the form on the web it shows the user name and password of my data base. Can anyone of you please help me to hide the user name and password, if there's any way of course?.
Thanks a lot!!.

Luis,
Then, as inolau's notice, create logon screen (or use the default one) and force the users to logon at runtime. Do not pass username/password as parameters.
inolau,
True that if the connection is specified in the config it will be the same for everyone. However, every case is different. For example one of our apps gets S3 credentials (from non-Oracle S3) as session parameters. It uses this common db connection to validate some stuff with the database, read security definitions and then it re-connects the forms using the credentials.

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?

Help here > Mac OS X: Changing or resetting an account password

Registry Error: The user ID and password pair passed in a get_authToken mes

Hello
I am trying to publish web service thruth the UDDI CLINET
I got into
http://sap-xiqas:50000/uddiclient/process/
chose Publish Service Definition
SAP Registry
and tried login with my user which has sap_all
and also with j2ee_admin
and get the following msg
Registry Error: The user ID and password pair passed in a get_authToken message is not known to the Operator Site or is not valid
have some1 managed to solve it ?
thx Shai

Hi,
Use should use:
call function 'SUSR_CHECK_LOGON_DATA'
          exporting AUTH_METHOD = 'P'
                    USERID      = k_user
                    PASSWORD    = k_senha
          exceptions
               others = 1.
if sy-subrc = 0.
   write 'Ok'.
else.
   write 'Not Ok'.
endif.
Best regards,
Leandro Mengue

HT4906 I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto?

I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
I'd also like to make address labels and don't know where to find that either

You would make address lables with the Contacts app.
If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself.

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

A login webpage gives the message "This script requires that jquery.js be loaded first." then will not show the user ID and password login boxes. How can this be corrected?

That message is listed in two scripts on the bank's site. One function that can display the message is named PhotoRotator and the other is named PromoRotator. However, I can't seem to trigger the error myself.
If you have any add-ons that alter the page, such as ad blockers, try creating an exception for these sites and see whether that helps:
www.northrim.com<br>
www.northrimbankonline.com
You also could try this logon page: https://www.northrimbankonline.com/onlineserv/HB/Signon.cgi
(''Obviously you should be cautious about links offered on public forums to ensure you are not being phished! Check them out carefully before entering your username and password.'')

How do I change my user name and password if I can't logon to the computer?

how do I change my user name and password if I can't logon to the computer?

What Mac is this with what version of OS X?

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

How do i change the administrator name and password when i forgot both of them

how do i change the administrator name and password when i forgot both of them?

Find the user name and then reset the password.
Start the computer,then press and hold down command and R keys to start into recovery partition.
When you see the Apple logo, release the keys.
Wait until OS X Utilities window shows up.
Move the mouse to the menubar at the top and click "Utilities", then select "Terminal"
from the drop down.
Terminal window will appear.
Type in resetpassword and press enter on the keyboard.
Leave the Terminal window open.
Reset Password Utility window will open with Macintosh HD selected.
Select the user account from the popup menu box under “Select user account”.
Note down the user account name.
Enter a new password.
Reenter the new password for the user.
Note it down.
Enter a hint.
Click the "Save" button.
Click  in the menubar and select Restart.
Log in.
If Keychain dialog box appears, select “Create New Keychain”.

How can I changed the system username and password

How can I changed the system username and password
Need help urgent

Paolo,
If I understand his requirement good (to have system user but must be called xxxx) then that's the option.
Well, that's obvious...Sure, but sometimes we see complicated thing but not something what is obvious...
Also your demonstration to OP how to change user password indicate that OP-level of knowing Oracle user management is such that OP maybe need help for something what is for you or me obvious...
Cheers!
Message was edited by:
Faust

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

For some reason Firefox is not asking if I wish to save the user name and password anymore. Please help as to why.

For some reason Firefox is not asking if I wish to save the user name and password anymore. Please help as to why.

Your plugins list shows outdated plugin(s) with known security and stability risks.
*Shockwave Flash 10.0 r32
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
* Make sure that you not run Firefox in [[Private Browsing]] mode
* In Private Browsing mode some menu items are disabled (grayed) and features like visited links are disabled and not showing
* You are in Private Browsing mode if you see "Tools > Stop Private Browsing", possibly grayed
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"

HT203261 When i open my email it comes up with The user name or password is incorrect. This has only come up in the last day. As far as I am aware the user name and password is correct. Can you please advise.

My email has been working fin. however In the last day or so when i open my email or send an email it comes up with,
The user name or password is incorrect. As far as I am aware the user name and password is correct. Can you please advise.
Declan Jackson

Try going into Settings > Mail, Contacts, Calendars and select that email account and try re-typing in the account's username and password

I know the user name and password but forgot the secret question

I know the user name and password but forgot the secret question

Check the AppleCare number for your country here:
http://support.apple.com/kb/HE57
Call them up, and let them know you would like to be transferred to the Account Security Team.@

How do we pass the user id and password in report URL

Similar Messages

Maybe you are looking for