How do we Prevent Creation of Production Orders for Phantom materials.

Dear Experts;
We have some materials which are Phantoms.
We have set "special procurement type" as 50 in MRP2 and "Strategy Group" as 59 in MRP3
These are non stchable items, but have BOMS.
We dont create orders for them, however at the mement the system allows order creation. How do we prevent creation of production orders for these items in the system.
Thanks in Advance
Richard.

Dear Richard,
Check using this BADI - WORKORDER_UPDATE using method IN_UPDATE or Release by including a check if MATNR and for
WERKS combination if SOBSL = 50 from table MARC,then do not allow to save.
Check whether this works or else you have to set a plant specific status using OMS4  for not allowing production order
creation and assign this value in the material master of the phantom assemblies.
Check and revert
Regards
Mangalraj.S

Similar Messages

  • Single production order for many materials

    Dear Experts,
    We can create a single purchase order for many materials. Like wise can we create a single production order  for many materials which is produced from single raw material in same operation?
    Thnaks,
    Chetan

    Chetan,
    You can not create a single production order for multiple materials.
    However, the workaround would be create one material as BOM header and and assign the remaining materials (for which you want to have production order) as BOM components with by-product or co-product. With this you can receive all the materials against one single production order.
    This will have implication in many areas like planning and costing.
    Evaluate the option with your FICO consultant also, before going ahead.
    Regards,
    Himanshu

  • How to get a list of production orders for a work center?

    Hello SDN Community, 
    I have an requirement to display in a pop-up window a list of production orders for a work center.
    Does anyone know which screens/transactions would show this relationship?
    Or better yet, does anyone know how to demonstrate this from the tables themselves?
    Thank you,
    Dean Atteberry.

    Hello Mangalraj.S
    >>Goto COOIS-->For the field List select PPIOO000 - operations and layout -->standard layout
    >>and execute,by this you will be able to see the operations for each order and to which
    >>work center they are assigned.
    The system I am working on is ECC 6.0.
    For this system the values in the dropdown for the "List" field are "Capacities, Items, Order Headers, Sequences, Trigger Points, etc".  But nothing that says PPIOO000 - operations and layout.
    >>Or else in the in input screen of COOIS,enter the work center for which you want to see which
    >>are the production order's assigned and execute.
    For system I am working in, I do get a grid display when entering a work center.  It has columns like "Order, Material, Icon, Order Type, MRP cntrlr, etc."   But no column with Work Center.
    Any further insight into how to use this transaction to display a list of production orders for a work center would be greatly appreciated.
    Thank you,
    Dean Atteberry.

  • Creation of Production order for FInished Product through Project

    Hi,
    Pls clear me on how we can create a Production Order for finished product.  
    If we confirm the production orders in PP, cant the same be confirmed in PS.. Should we consider the same activity types in both PS and PP
    Pls clarify

    hi srikanth,
    your answer has been very helpful... but could u clarify  why MRP is run in MD51 for WBS element and in MD02 for network..
    Pls clarify...  My scenario is like this ...                                                                               
    A
                            B                                                                                C
                    D  E F G H I                                                                                J K L M N O
    I have  a Assemblies B and C which are always delivered in sets.. under assemblies B and C,  we have 6 sub assemblies which has its own components.  I am assigning sub assemblies to differenet WBS elements 01 and 02. so, initially these sub-assemblies are produced to stock. this should happen in PP i.e., through production orders generated in MRP run ( MD51 ). In the next phase i will assign Assemblies B and C to another WBS element.  Again system should generate two Production orders thru MRP for this. Here the 6 sub-assemblies produced earlier will be consumed in confirmation of the production order...
    What i am doing is this correct...
    and the procurement for the components is happening thru the purchase requisition generated via MRP. the components themselves are not directly assigned to the project..
    Pls advise and clarify?

  • Prevent creation of production order in case of missing parts

    Hi,
    Even in OPJH I have maintained no creation of order in case of missing parts, when i create a production order from planned order and I know the Bom components are not avialable in stock then also system allows to create. Pls guide on how to pevent creation of order.
    Regards.

    Dear,
    If my understanding is correct then the settings in OPJK for business function 1 - availability check during order creation even if
    the value is set as 3 for collective conversion,this works during partial conversion of planned order into production/process
    order or during collective conversion of planned orders into production orders.
    But however the setting in OPJK for business functionality 2 - during order release checks and if
    there are any missing parts means the order cant be released for the value 3 set for release material.
    Just check this link also,
    Re: Avalability Check
    Regards
    Mangalraj.S

  • Creation of Production Order for Deleted Material

    How can I prevent a production order from being created for a material that has been marked for deletion?  Currently, our system generates a warning but allows the order to be created.

    Thanks for the suggestion of the material status but I am trying to stay away from assigning a code to a delete flagged material.
    The message I am getting is CO732.  I went into transaction OPJB to change the message from warning to error but that message is not listed in that transaction.  I tried adding it and still received a warning message.
    Is there another transaction to check so I can switch it?
    Edited by: Joe Reckelberg on Apr 28, 2009 4:49 AM

  • How to hide Summary Tab of Production Order for a Particular User

    Hello Experts,
    My customer doesn't want that all users are able to see the Summary Tab information in Production Order, as it contains Cost information, which is very confidential in their case.
    Does anybody has idea how to achieve it ?
    Best Regards,
    Samir Gandhi

    Hi Samir...
    This you have to do through SDK as there is no provision to hide it through any authorisation or any additional authorization.....
    Regards,
    Rahul

  • How to find the status of production order for fully delivered orders

    Hi,
    My question is :
    when an order is confirmed for the end of month(jan) and no Gr is generated in jan then the order will not be included in jan month.
    For this solution given by functional :
    Get fully delivered orders for that period.
    My query's are :
    how to find fully delivered orders, is there any status in Co02 tran?
    Any suggestions for the given query are welcome..with elobration..
    thanks in advance.

    hi,
       The table name for Order status is VBUP and the field name is GBSTA.
    regards,
    Meiy

  • Prevent creation of PM orders for some equipments

    Good Day PM experts,
    I have a requirement in which users should be prevented from creating a PM work order against specific equipments.
    What best method can be used?
    Best Regards and thanks

    hi
    I am not sure, but consult with you abaper to check whether it is possible to achieve using authorization group for the equipment
    regards
    thyagarajan

  • Purchase Requisition on creation of Production Order

    Dear Experts,
    Please clarify the following points
    1 In our Business Scenario on creation of Production Order for a Material, Purchase Requisition is being created on creation of Production Order itself for all Dependent Materials where the items are declared as Non Stock items in BOM  and for the stock items only on MRP run the Purchase Requisitions are created. Is this the standard procedure, or can we customize to create the PRs for all the items on creation of Production Orders??
    2 What exactly the processing indicator in MRP list indicate?
    Thank you,
    Regards,
    Ramakrishna

    For Non Stock items it is understandable, that a PR has to be created with production order creation , as they are not in the stock.
    For Stock items, the creation of PR cannot be linked with Production order creation but can be done with MRP run.
    We can make the system create planned orders or Purchase requisitions or PR in opening period during MRP.
    Processing indicator gives you the scope of PLanning.
    PLanning all the materials within the Planning horizon  --NETPL
    Plaqnning all the materials beyond also--NETCH
    Deleting the current plan and recreating the plan.-regenarative PLannng
    regards
    Ratan

  • BOM Selection Mandatory while creation of Production Order

    Hello Friends,
    I would like to know that is there any option other than production version which makes it mandatory to have valid BOM must for creation of Production order / coversion of planned order to Production order.
    I have tried with Production version option but it doesnt throw any error in case BOM with inactive status has been selected in it & also Production order gets created & released.
    Before going for user exit / enhancement option, I just wanted to ensure that it is not possible with standard SAP.
    Kindly share your views on the same.
    Your urgent replies will be highly appreciated.
    Regards,
    Tejas

    Hello Tejas,
    I think this is standard SAP Behaviour.
    Try with following exits:
    PPCO0018
    PPCO0012
    Also check out the following link:
    [How To Make BOM Mandatory while creating Production Order;
    Regards,
    Vinod

  • Creation of production order report as per format

    Hi!!!!
    Gurus!!!!!
    I want production order report in some required format.
    How to see the format on production order
    How to see the report in the following format.
    Company name:-
    Material requirement Number:-
    date :-
    Time:-
    Due Date:-
    Plan Date:-
    Production Details:-
    Item Code:-
    Item Description:-
    WH:-
    Planned Quantity:-
    Completed Quantity:-
    Completed date:-
    Rejected Quantity:
    Waste and Scrap:-
    Evaporation Quantity:-
    Components:-
    Sr.No.      Item No.   Desription             BOM Quantity  Planned Quantity  Issue Quantity
    1     1000     RED                 20                     200                      200
    2     1001     BLUE                 30                     300                      300
    3     1002     Waste and Scrap -0.45987     -0.9845           -0.984567
              Total Quantity      50.45987     500.9845                     501.98888
    Order Remark.
    I want to see the report in this format.
    Thanks with Regards,
    Nitin

    Nitin,
    Your requirement certainly qualifies for creation of a new Production order Print form and custom print program if you are looking at printing at individual order. If you are looking at report, then certainly a custom report.
    Regards,
    Prasobh

  • Creation of production order with reference to sales order

    dear all guru's,
                       i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
    regards
    ujwal

    Hi,
    For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
    This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
    So if your strategy group is already 40 then you need not change it.
    However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
    Hope this helps.
    Revert if you have any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Sep 27, 2008 8:50 AM

  • Avoiding creation of reservation during creation of production order

    Dear gurus,
                     when we create a production order for a semifinshed material there are reservations created for the raw material used to produce the semifinished material ,what if I what to avoid the creation of material reservation .
    I have tried out with setting in opl8 wherein we specify the creation of reservation on release of production order or on creation or never but it is not working otu please if u can help me out.
    I what to create manual reservation for production orders......Is it possible?
    Thanks in advance.

    Dear ,
    .As long as , you have BOM components are in stock  , system will generate reservation for them when you create Production order  where as if any of the component is not available in the stock then it will generate PR based on the material master set up because when you are creating production order or creating planned order through MRP , system performs material availablity check in the back ground and generate either reservation or PR automatically .
    Secondly, you can not create Manual Reservation  , See the Std SAP message .Message no. M7 126
    You entered an order whose category only permits automatic reservations. The following order categories do not allow manual reservations:
    10 PP production order
    20 network
    30 maintenance order
    40 batch order (process manufacturing)
    50 inspection lot.
    So conclusion is you can't stop creation of reseravtion .Curious to know why you do not want reservation for PO ?
    Hope this is clear
    Regards
    JH

  • Reg:Bapi for mass creation of production order/confirmation

    Dear Experts,
    I wanted to know with the following BAPI is it possible to create Multiple production orders for different semifinshed Materials along with material availability check and other functions similar to CO01 transaction.
    I knew there are standard transactions for mass confirmation for production orders. But i need a confirmation on this BAPI . As i am planning to go-ahed with ,mass creation of production order creation / Order confirmation in single custom transaction.Need back flush activity even supported.
    BAPI_PRODORD_CREATE to create the orders.
    BAPI_PRODORD_RELEASE to release the orders.
    BAPI_PRODORDCONF_GET_TT_PROP to get the default data for the confirmation.
    BAPI_PRODORDCONF_CREATE_TT to ost the confirmation of production order.
    Along with this BAPI do i need to commit any other BAPI to carry out back flush for components.
    Need your suggestions to take it further.
    Regards,
    Daya.

    Dear SAP Daya
    If the issue has been solved, please close this thread.
    You have already mentioned that the issue has been resolved, thefore, you should not ask for help on another thread before closing this one, as it looks like you are trying to force people to answer your threads.
    Users are always trying to answer as many threads as possible on good will we don't need this kind of "incentive".
    Please read carefully the The SCN Rules of Engagement, especially point 8:
    Be responsive. If an SCN member has answered your question, please mark the answer as "helpful” or “correct”. Mark the discussion as “answered,” so that other members can find the answers more easily
    Also, I checked your old threads and I could observe that there is only one closed. Please review your old threads and close those already solved.
    BR
    Caetano

Maybe you are looking for