How do we replicate product categories from SRM/ECC in to SUS system

How do we replicate product categories from SRM/ECC in to SUS system  in srm 7.0

Hi Gopal,
Are you confused between SUS & ROS? If you meant ROS, it is advised to create local product categories in ROS under COMM_HIERARCHY.
Let us know your exact requirements.
Regards,
Nikhil

Similar Messages

  • How ro remove unwanted Product Categories in SRM 5.0 Extended Classic

    Hello Everyone,
    I have an issue with unwanted Product Caterories in  production SRM. I have read seveal articles on using tow different code to delete the PC, but can't seem to get to a good solution.
    1. use t-code Com_Hierarchy and delete the PC, but my trash can is grayed out and I'm not sure how to get it clear.
    2. use com_product_delete_single and notes that i have to register and then fill in a table COMC_PR_TOOL_RE. when I try this in DEV the table is not define and the proces doen not seen to go anywhere.
    Can some help me is either case, I like number 1, but thatjust seem to easy.
    Thanks,

    Sammy,
    in the COMM_HIERARCHY transaction go inside the hierarhcy for the Product Groups, F6 to change the mode in "change mode" and then doble click on the Product Category you want to delete. Then you can see the trash can is active and you can delete a Category.
    NB: the system give you a warning message that the source system is not srm. Just jump it with another Enter.
    Hope this can help you.
    Best Regards,
    Maria

  • Product Categories: from replication to transport viaCOM_CATEGORY_TRANSPORT

    Dear experts,
    Weu2019ve implemented SRM 4.0 (SRM_SERVER 500) with multiple ECC 5.0 backends and after reading document u201CSetup, Transport and Copy of SAP EBP Systems (Version 1.4)u201D weu2019ve realized weu2019ve done some things wrong, such as: replicate product categories from backend to frontend in Quality and Productive environments instead of transporting them via report COM_CATEGORY_TRANSPORT.
    Weu2019d like to go back to the right direction and here we need your help and experience.
    Do you see any feasible way of doing this? Do you think this is still possible taking into account that as a consequence of replicating categories instead of transporting them weu2019ve done a lot of customizing manually?
    Many thanks for your help.
    Regards,

    HI Dean
    Thanks for the info.   I have been in touch and they have recommended the following reports for deletion but these are no good as cannot us in P if documents assigned to them.
    COM_HIERARCHY_DELETE_SINGLE,
    COM_HIERARCHY_DELETE_ALL,
    COM_PRODUCT_DELETE_SINGLE,
    COM_PRODUCT_DELETE_ALL
    I think we will go down the route you suggested which was option 2.  I assume we would create a error message so if a NSV was selected then a error would pop up and not allow SC creation. Then I would need to load the new UNSPCC codes to the same Product Hierarchy in SRM.
    Thanks for your help with this.
    Sharon

  • Transferring Product Data from SRM 7.0 to SRM-MDM 3.0

    Dear SRM-MDM experts,
    We are running the program BBP_CCM_TRANSFER_CATALOG to transfer product data from SRM 7 to SRM-MDM 3.0  The question we have is after running the program, where do we find the file the XML file which the program has generated so we can see the results?  SLG1 just shows how many products were processed.  We need to see the list of the products generated.
    Thanks and regards
    Pedzi

    Hi Pedzi,
    You can find the generated XML file in MDM server. Here is the path to get the Product Data XML file.
    C:/usr/sap/SRD\MDS00/mdm/distributions/MDD_ORCL/REPOSITORYNAME/Inbound/SRM/_MDMProductDataTransmission/Archive
    Thanks,
    Anshuk Saxena

  • Replicating Products/Catalog from SRM to MDM

    I am implimenting SRM and MDM on 7.1 and SRM-MDM Catalog 3.0
    I wanted to replicate catalog data from SRM. As we know each catalog record in MDM contains Product, Supplier, Info record data. I am not sure if we have to map all these in MDM or It will be mapped by SAP delivered content for replication.
    I am using BBP_CCM_TRANSFER transaction in SRM to transfer data to MDM. In the selection screen I am using 'Category Hierarchy', Category ID and Language fields. I did unchek/check Force Intial Transport and P_debug. There was not much difference.
    However I am getting following info messages, but unable to see any data in MDM
    16.06.2010 09:27:41: Initial transfer for catalog SRM_EXTRACTED_CTLG
    16.06.2010 09:27:42: Determine category TELEPHONE (5 products)
    16.06.2010 09:27:42: Start of catalog transfer for 1
    16.06.2010 09:27:42: catalog transfer ended
    I am now stuck here. Can any one share details of the replication process and steps involved.

    Hi Sudha,
    Please explain your business scenario. What data you want to replicate from SRM to MDM. We can replicate Suppliers, Contracts and Product Master from SRM to MDM through XI. Make sure you hae configured XI settings for that. You have to download the pre-delivered XI content from SAP Markeplace. Please check Note # 1177779 & 1177780 regarding that.
    We can use following reports in SRM to replicate following data in MDM
    BBP_CCM_Transfer_Catalog-----Product master
    ROS_SUPPLIER_SEND_TO_CATALOG-----Supplier data
    SRMMDM_CTR_Transfer----Contract data from SRM
    In your case, you are running BBP_CCM_TRANSFER. Please check the SXMB_MONI t-code to monitor the XML messages whether XML files are processing correctly or getting stuck.
    Thanks,
    Anshuk Saxena

  • How can we transfer product attributes from an already existing site?  We have thousands of items and it would be tedious to do them one at a time.  Is this possible through a CSV?

    How can we transfer product attributes from an already existing site?  We have thousands of items and it would be tedious to do them one at a time.  Is this possible through a CSV?

    There are two parts to this:
    1) It may be that you should have an Apple Education Support person helping you with this. If you have enough computers for this to be a problem, you may benefit from a Server, a site license, and an occasional visit from an Education Support Specialist.
    2) The brief answer, if you want Individual Apple_IDs to control each computer, is to buy new copies of Mac OS X under those new Apple_IDs and re-download and re-Install. Mac OS X is customized to the Apple_ID before it is downloaded.

  • I downloaded firefox update had nothing but troubles since comp crashing how do i send my bookmarks from firefox to ie on this system

    i downloaded firefox update, had nothing but troubles since, computer crashing when i try to open, or cursor lag for a long time ie. i try to move to do something it has to think about for 30 seconds to having to pushing reset to get anthing hapening
    but still freezes up i put my comp into a very good repair store cost me $119 to only to find no problem with computer, they had it running ,burning , doing everything properly, but they were using ie, as soon as i stoped that and went to firefox, back to lag etc. com bluescreen then crashing when i got home twice so far tried using previous version in system same problem, how do i send my bookmarks from firefox to ie on this system, so i can completely uninstall then reistall a fresh earlier version

    I have to agree, fixing something that was working fine and replacing it with the new crap has led me to switch browsers.BIG FAIL MOZILLA
    Why do people do this shit.
    Turn off updating to keep your good working version or you will be forced to use the new version that is missing some well used features.

  • How delet and replicate a vendor in SRM.

    Hi,
    Can any one help me whether a vendors BP number can be deleted using FM: BBP_BUPA_EVENT_DELE2
    Actually I have updated the currency of my Vendor master record in the back end I want that to be replicated in SRM. only for a single vendor.
    Is there any funtional module for replicating a single vendor in SRM.Also how to delete the existing BP number for the same vendor. ( I mean I want to delete the BP number from SRM and replicate it again)
    Please suggest
    Best Regards,
    Sairam.

    Hi,
    You can  use FM BBP_BUPA_EVENT_DELE2 with the PARTNER_NO (example 0000000012)
    Then you can check in table VENMAP that  the deletion was done
    BR,
    Disha.
    Pls reward points for useful answers.

  • Product Categories in SRM Browser.

    Dear SRMers,
    System Information: SRM 5.0 and ECC 6.0
    My categories are not getting loaded in to the Drop down list box, during the select Goods/Service step when creating a shopping cart line item in SRM Browser.
    I checked in the COMM_HIERARCHY tcode in SRM server and there I see all the Product categories listed with their properties etc.
    Please let me know what may be the missing link.
    Points will be rewarded.
    Thanks in advance,
    Bob

    Hi,
    Please check the following points :
    - Your PRCAT hierarchy is attached to purchasing application in transaction comm_prapplcat
    - Your are connected to SRM in a language where there is a description for your PRCAT. In other words, if you PRCAT description are in german, and if you are connected in english, nothing will appear !
    Kind regards,
    Yann

  • How to retrive Exchange product key from the Installed Exchange Servers

    How do I retrieve the Product key from an existing installed exchange servers.

    Right. Think of the security implications if you could just grab the key from the software itself.
    Do any software products allow that?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • How to Import Contacts and Categories from outlook 2007 to outlook 2010

    Hi,
    I cannot import my contacts/categories from Outlook 2007 to OUtlook 2010.  I have tried using a.csv file but it forces Outlook to stop responding every time it starts to import.  Not sure how I do it using a .pst data file.  Please help!

    You can try to export/import categories using OutlookFreeware.com's
    free
    Export Master Category List and
    Import Master Category List tools. There are also free utilities for
    exporting contacts and
    importing contacts, give it a try!Alexey Kuznetsov,
    Relief Software

  • How to execute BW-Bex reports from SRM

    Hi
    Anyone know if there is an easy way of execute BW Bex reports directly from the SRM interface? Or is the easiest way to have the users start the Analyzer seperatly.
    We are running:
    SRM 4.0 (webb interface)
    BW 3.5
    Thanks and regards
    Pontus

    Hi
    Thanks for your reply.
    I can run that TC from the BW but not from SRM. It just says that TC does not exist in SRM.
    Best Regards
    Pontus

  • Multiple Local Product Categories for One ECC Material Group

    Hello experts,
    I have a question regarding Product Categories. I am using an Extended Classic Scenario and so, I retrieve Material Groups from the backend. Nevertheless, in order to have a more accurate split than ECC Material Groups in SRM, I would like to create local Product Categories which point on the same ECC Material Group. Eg. : 
    ECC Material Group
      - SRM Product Category 1
      - SRM Product Category 2
    I saw that I can create this kind of structure in COMM_HIERARCHY and I updated it in the PPOMA_BBP (I set * for backend and for SRM).
    Nevertheless, when I create a SC, I can not find the local Product Categories I created?
    Do you know how I could process?
    Thanks for your help
    Patrick

    Hi Patrick,
    Looks like you got confused in understanding the concept.
    You can not create a Local product category (material group) from a back end product category.
    You can have both backend R/3 material groups and local product categoris (material groups) parallelly.
    That means in COMM_HIERARCHY for R3MATCLASS hierarchy you have two nodes created under that, one for backend material groups and the other for local material groups.
    In stand alone scenario or de-coupled scenario you can use local product categories and not in Extended classic and Classic scenarios.
    For accessing a local product category you should have a local P.Org, local P.Group and the users should be assigned to these local P.Orgs or P.groups.
    If you have such a setting in your org. structure then you can create S.Cs for local Product categories and local materials.
    Hope this makes you more clear in understanding the issue.
    Clarifications are welcome.
    Award points for helpful answers.
    Rgds,
    Teja

  • How to generate Pay-in slip from SAP ECC 6.0

    Hi SAP Guru,
    Can u please tell me how to generate pay - in slip for depositing of checks into the bank from SAP ECC 6.0
    Thanks
    Rajeev

    Dushyant,
    Check whether the program is in TRDIR table or not,if it is there then it will be available else you need to talk to basis guys.
    If the program is there and you want to revert to previous version then go to version management and select the version number and then click on the button RETRIEVE.
    Smartforms don't haver the concept of version management and hence it is always advisable to download the smartform and then go ahead with the changes.If in case you want to revert to pervious version then you can upload the downloaded smartform and get  back the previous version.
    K.Kiran.

  • How-to extract data in chunks from one R3 to another R3 system

    Does anybody know how to extract data in chunks from one system to another? Imagine you would like to extract 1M records in chunks of 10K records, how would you do it between 2 different R3 systems? A cursor (even with hold) doesn't work
    Any suggestion appreciated
    Thanks
    Ioan

    Hi Ioan,
    I'd do it with fm : TABLE_ENTRIES_GET_VIA_RFC (with where clause-tab)
    or fm GET_TABLE_RFC (get all items)
    regards Andreas

Maybe you are looking for

  • EJBs in Oracle 8.1.5 with SDK 1.2.2

    I am trying to get our Java Application - formerly a 1.1.7 - which accesses EJBs in the database (8i - 8.1.5) running with the new JDeveloper 3.0 with SDK 1.2.2. After some Exceptions that remind me of missing classes I get to the point where I do th

  • WHT Vendor onaccount payment

    Hi friends, We want to pay a vendor on account payment but not advance payment(through f-48) and not against bills (f-53 or f-58).  We are trying to post through f-02.  Then tds is not proposing. Finally we want to pay onaccount payment but not throu

  • How to make search between two dates accept null not obligatory search proplem

    Hi guys when i search record between two dates it works ok success but you must enter date from and dateto first to  to make search i will show what i need from this example I need to search dynamic by 4 textbox 1-datefrom 2-dateto 3-EmployeeNo 4-Emp

  • Disable hyperlink trigger of Mac Mail

    I think I may wish to disable Mac Mail. The problem is that when I click on a hyperlink in a document cell in a pread sheet that contains a hyperlink (e-mail address) my Mac automatically starts Mac Mail and presents a new mail message that is alread

  • SCCM 2012 - SUP - updates not showing as downloaded when they actualy are

    Hello. I have a strange problem. I have collected my updates by year to have an overview of what is still updates..  In the console I have 4 updates showing as not downloaded. If I highlight these and choose to download I get this So appearantly it w