How do we see which macs have cc installed on them, we can only see licences

We are trying to see what macs have cc installed on them in admin console we only see the licences

Yeah, OK, I can see an arbitary number for CPU used since session startup (what does that refer to by the way? It can't be percent), and I can see that one user has consumed massive amounts of CPU compared to all other sessions, but he is currently not running anything, so how can I see which SQL he ran in the past day that cuased all that CPU consumption? Can I do this without AWR?
By the way, do you need a Diagnostic Pack license for simply viewing the Performance tab of dbconsole? I Can go into dbconsole and see history for 2 days back and see the massive espike that caused CPU consumption, but when dbconsole displays the list of top SQL and top sessions under the graph, is it the top listed SQL that consumed the most cpu or do you need to correlate the colours, i.e. find the SQL listed in top SQL that has the same colour as CPU usage on the graph (green) even if it is not listed as the top "consumer" (which I assume means top AAS consumer: overall consumption of all resources)?

Similar Messages

  • HT5517 I cannot see my Apple TV.  I have 2 of them and can only see one.  Ideas?

    I cannot see my Apple TV with airplay.  I have 2 of them and can only see one.  Ideas?

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.

  • Iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    iphone not work i can only see the APPLE NOT WORK, iphone not work i can only see the APPLE NOT WORK

    First, try to reset by holding the sleep and home button for about 10sec, until the Apple logo comes back again.
    If this does not help, connect in recovery mode and restore, explained in this article: iOS: Unable to update or restore

  • HT1595 Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

    Ive just updated my Apple TV software to V 5.0(4099) and now i cant see you tube etc on my home screen, i can only see settings and computers, what gives? thanks

    I just had this issue. Go into settings and reset the Apple TV after the firmware update. (note just "reset settings" and NOT back to factory settings)

  • HELP, please! My photos have disappeared from iPhoto library & I can only see them on the screensaver.

    Firstly, I should say we haven't updated/installed/deleted anything.  I just opened iPhoto yesterday and first it told me it couldn't open up without specifying a library, but then it seemed our library has just disappeared.  I then created a new library as, I have to admit, me & my DH are complete tecno dummies, but that didn't help much.  The only thing which we have done in the past couple of days is set up the screensaver to play our photos.  So now we can only see the photos on that - I'm presuming that means they haven't been completely lost (?) but am in a panic as we've got no back-up (three years worth of photos!).
    When I go on 'system preferences' (hope that's the correct translation, our computer's using Italian) and the screensaver, I can see 'picture folder' where all the photos are but I can't find that anywhere else on the computer.
    Also, I read other threads about similar probs & tried launching iPhoto pressing down 'option & control' but that didn't help me out either.
    We also spent half an hour on the phone to the Apple helpline here in Italy (yes, that's a charged call) to try and understand what's gone wrong and the advisor just kept telling us she didn't know how to help us out 'cause our Mac is an old model
    Apologies in advance for my complete ignorance about how to solve this problem but I'd be really grateful if someone out there could shed some light on what's happened. 

    when you say to go to my Pictures Folder, do you mean to go on Finder, then Pictures, then look at the iPhoto library?
    Yes. Is there more than one there?
    The material in your screensaver are cached images. They cannot be recovered and soon they will go way.
    If you have deleted your Library (and it sounds like you have done this, accidentally)  the you have deleted your Photos and you need to restore from your back up.
    Regards
    TD

  • I have an Apple TV and I can only see Home Sharing and Settings, NO YouTube

    I ran an update on my Apple TV last month, when it restarted I could not see anything apart from Home Sharing and Settings. I can see the option of YouTube and have racked my brain but can’t get to YouTube from my Apple TV.
    If I search for a video on my iPhone then I can play it Via the Apple TV but I can’t directly access YouTube. Please help me out if anyone has any clue how to fix this.

    Did it - didn't work.
    I can access the internet from every other apple device that is connecting to the same router as the Apple TV.
    Please don't tell me it's a "network" issue. The AppleTV is the only one that can't seem to "see" the internet.

  • I have two HP printers connect but can only see one in the "soution center"

    How do I get  solution Center to recognize both printers. I'm having trouble with print cartridges in my 2170, but when I try to use solution center it only show my 6500. Any suggestions would be appreciated.

    One of the reason why the printer is not showing on the solution are the software is not installed correctly and during the installation you encounter a fatal error whisch is common during installation. If its installed already you might need to uninstall and reinstall software. You can remove the printer from add/remove program. Reinstall the software and make sure that the the software is successfully installed.

  • A user can only see the public area in a collaboration room

    Hi all,
    We have experienced that a certain user can only see the public area of
    a collaboration room although the user has member rights to see more
    content.
    We have tried to remove the user from the room and add him again. It
    did not help.
    Other users have been added before and after this user without problems.
    What could be wrong with this user?
    Regards,
    Ashwin

    Hi Ashwin,
    Check the roles and the groups by this user..  Is the same of the others users?
    Regards
    Eduardo

  • How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

    How can i get more than 100 email in Mail? I can only see the latest 100. I have an hotmail account and it worked at my other mac.

  • How can I see which pictures have been backed up

    How can I see which pictures have been backed up

    All the pictures in your camera roll will be backed up in iTunes or iCloud (depending on whether you have iCloud backup enabled on your iPhone) every time a backup is performed. The other photos stored on your iPhone (i.e. the ones you didn't shoot using the iPhone itself) will NOT be backed up.
    Nevertheless, it can't hurt to import them into iPhoto or Aperture (or whatever you're using) as roaminggnome suggested.

  • My ipad mail is synced to my iMac mail account. On iPad, I can only see my inbox and sent messages. I can't see any of the folders I have created on my iMac. How do I do that? Probably a dumb question, but I know there's a lot of smart people out there!

    My iPad mail is synced to my private email account, which I organise on my iMac. On iPad, I can only see inbox and sent messages folders, not any of the other folders in my email account I have created on my iMac. How do I get iPad to show my other folders? Probably a dumb question, but I know there's a lot of smart people out there.

    If you select a mailbox, you should get an Edit button (easier to see in landscape mode). Clicking the button will provide you with check circles for the messages. You also get Delete and Move buttons at the bottom. Check the messages you want to move and then navigate to the mailbox you want to drop them into. I think as long as you can navigate to a mailbox you can move the messages to it.
    In the Mac Mail application and probably Outlook on the Windows side, you also setup rules to move messages to specific mailboxes. If the mailboxes are stored on the server, then you can have the sorting done on the server and they should appear that way on the iPad. If your later messages do not show up, you may need to have the iPad app pulled down more messages until they are all showing.

  • I am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    i am trying to connect my mac and PC through my network. the pc can seen and connect with the mac, but my mac can only see the pc it can't connect. how do i fix this?

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • I want to renew my window and how to save backups which i hav on my itunes ??

    i want to renew my window and how to save backups which i hav on my itunes ??

    See Backup your iTunes for Windows library with SyncToy. As long as you copy your entire library over to the new/rebuilt computer your devices should sync with the library and will be backed up on the first sync. If you really want to backup the device backups see this support document iTunes: About iOS backups and backup the device backup folders, then restore them into your new profile.
    tt2

  • How do I know which commands have been pushed to switch by PI CLI template

    We have PI version 1.3. I tried to deploy the built-in CLI template "vlan" just to create a vlan. I run the template and input vlan ID and name. The job is shown as successful in PI but the vlan is not created on the switch. In the transcript part of the job history, it only shows "configlet:response: config t". Please see the attachment for the screen shot. How do I know which commands have been pushed to the switch by the CLI template? How does PI push the CLI template to the switch? via snmp or telnet? I tried to run "debug tacacs authentication" and "debug tacacs accounting" on the switch because the switch is configured for command authentication and command accounting but I don't see any commands in the debug. It looks PI did not push any commands to the switch. Please help me to troubleshoot this.
    Thanks.

    The MPEG 2 Playback Component required by Streamclip is an optional purchase.
    http://store.apple.com/us/product/D2187Z/A
    There are other converters that can handle MPEG-2 files; try Handbrake.
    Regards.

  • I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    I am trying to delete pages I have crated in numbers, but can only see them in print preview. Without print preview I do not see them. How can I delete these pages, but keep others before and after?

    Hi Crushed,
    Numbers doesn't have pages. It has a canvas that holds objects such as tables and charts.
    Drag the objects from the bottom of the canvas onto the white space above. That will reduce the number of "pages" (sheets of paper) that will print.
    Regards,
    Ian.

Maybe you are looking for

  • Exception caught and not thrown (CF9 Server)

    Hello, everyone. I've recently started seeing a JavaScript error with EVERY click of any link on the site. (I know this isn't the JavaScript forum - please give this a glance.. it's CF related, I promise.) I've tracked it down to "cfajax.js", which i

  • Private strand flush not complete how to find optimal size of redo log file

    hi, i am using oracle 10.2.0 on unix system and getting Private strand flush not complete in the alert log file. i know this is due to check point is not completed. I need to increase the size of redo log files or add new group to the database. i hav

  • Problem with nVidia GT 630

    Hi, i have a problem with my Desktop HP Pavilion Model: p6-2427ez, i buy it from Switzerland, ok so... i have GT 620 1gb 64bits DDR3 everythings works great... but when i change with other one GT 630 2gb 128bits DDR3 my desktop starts also video card

  • Getting focus

    hi all! who knows how force the focus to a JInternalFrame when is created? i tried these methods but niet the focus is always for the framework : * requestFocus() * requestFocusInWindow() thank u for ur interesting ciao

  • Photoshop CC Smudge/Blur Tool Makes Photoshop Unresponsive

    Photoshop will lock up the second I utilize the smudge tool and become unresponsive. I have tried turning all other programs off, loading the most current driver, tweeking my performance settings...basically everything I can think of. It is so frustr