How do yo suppress interference from background processes?

When you're recording, or even playing back, how do you suppress messages from the internet, upgrade notices and other processes that might interfere with Logic? Can you just unplug your modem? If you do that, will you get a lot of error messages?

Apple has trained it's users to update all the time when in fact, it's rarely (if ever)  that urgent. If you had been on this forum for a couple of years you would find that Automatic updates have cause a host or problems.
At this point in time the most efficient OS for audio recording is Snow Leopard, at least it's the one that's caused most users the least amount of problems and seems to be the most efficient.
If audio recording (and Logic) is important to you, leave auto-update on manual and check once a month, if there's important updates check on the forum to see if they've caused other users problems.
Think a little outside the box, Apple doesn't always know what's best for pro apps.
Definitely shut down any virus protection.

Similar Messages

  • How can I pass parameters from one process flow to another process flow?

    How can I pass parameters from one process flow to another process flow (sub process) in warehouse builder? let me know the steps I have to do in warehouse builder.
    Thanks in advance,
    Kishan

    Hi Kishan,
    Please post this question to the Warehouse Builder forum:
    Warehouse Builder
    Thanks, Mark

  • How get Compressor to "connect to background process"?

    Haven't use FCP 5.1.4 in a while. Just tried to export a program to Compressor for DVD Studio Pro. But after I loaded the program in Compressor and hit "Submit" I get a window saying, "Cannot submit batch. Unable to connect to background process."
    Please tell me how to move forward.
    Could this have anything to do with having just installed Leopard?
    With thanks, Duncan

    Jerry, THANK YOU! The link you sent me to the reinstall instructions for Compressor was exactly the right fix. I would still be poking around in frustration if you had not responded. The program I'm editing is for a non-profit group of developmentally disabled people who are really looking forward to seeing it, so they have you to thank. And thanks again from me. Duncan

  • How to Create Excel File in Background processing with different colors

    HI All
    I am trying to create Excel file in background & send it to user through e-mail, this i could acheive using fucntion module SO_DOCUMENT_SEND_API1, but here my requirement is i want to put different colors to columns of excel & this should happen in Background processing,
    Initially i completed above requirement by using HTML type of document with attachment type 'ALI'  & formatted output using write statement & used colors, after that i took this o/p using save_list function module & then table compress...etc.
    but i don't know how to achieve same if we need o/p in excel as size of object of excel file is less than that of HTML
    I am thankfull to everybody who will help me.
    Regards
    Lokesh

    Lokesh,
    Iam also trying to populate my text file with colors as an attachment . If you know this please let me know.

  • Exclude a server from background processing of a job

    I have a background job that runs slowly on only the Central Instance on the database server host.  The 6 other application servers run the same job in half the time.  How can I configure this job to run on all but one application server?  Is there some kind of background group that can be designated?  How can I change the background processing priorities?

    Hi,
    Set all btc jobs on CI to class A ? ( make sure you plan as B or C for this job)
    This should handle your both questions:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/ef/2c513897110872e10000009b38f889/frameset.htm
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a7f53505211d189550000e829fbbd/frameset.htm
    switch opmode temporary if needed:
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c4/3a5f1f505211d189550000e829fbbd/frameset.htm

  • How to stop an idoc from being processed further

    Hi Experts,
    I have a requirement where i have to stop the idoc from being processed in an user exit.
    I have to stop the idoc and give a suitable status message over there.
    It would be highly helpful if anybody tells me how to stop the idoc abruptly and giv the status messsage.
    Thanks in advance.
    Praveen.

    Hi,
    Check the below link
    https://forums.sdn.sap.com/click.jspa?searchID=11810720&messageID=3032674
    You need to find aproper EXIT.
    The avaliable options for you in the exit is
    IDOC_DATA
    Now if i pick the segment having shiped qty from the data record and check the same with the delivery qty your objective is half done.
    When the condition fails you need to update the IDOC with Error 51 saying that this is not possible .
    for that you need to bring your logic as
    LOOP AT IDOC_CONTROL.
    PERFORM LOGIC...
    ENDLOOP.
    FOR LOGIC .
    All the criteria and then update the status of the IDOC then error is generated and updated to the IDOc.
    PERFORM updatestatusidoc.
    endform logic.
    like this in
    form updatestatusidoc.
    IF subrc = 0 .
    t_idoc_status-docnum = f_idoc_contrl-docnum.
    t_idoc_status-status = c_idoc_status_ok.
    t_idoc_status-msgty = 'S'. -
    >denotes success
    t_idoc_status-msgid = 'ZXXX'.
    t_idoc_status-msgno = '000'. "
    t_idoc_status-msgv1 = itab-field.
    APPEND t_idoc_status.
    ELSEIF subrc = 1.
    t_idoc_status-docnum = f_idoc_contrl-docnum.
    t_idoc_status-status = c_idoc_status_error.
    t_idoc_status-msgty = 'E'. "denotes --->error
    t_idoc_status-msgid = 'ZXXX'.
    t_idoc_status-msgno = '001'. "
    t_idoc_status-msgv1 = itab-field.
    APPEND t_idoc_status.
    endif.
    endform.
    this has to be done to make the idoc to trigger error mode.
    Regards,
    Raj.

  • How do run any vi as background process

    Hi,
    Thanks for your replies to my earlier queries. I have completed the VI project for UPS. Now I want to make this VI to run in background process, means we have to give a one installable file to the user, when he/she installed this file, the VI has to run as background process and it has to start whenever PC boots up. And also VI icon for displaying front panel has to go to system tray (where time is displayed). Can you please let me know how to do this.
    Regards
    Shivakumar Singh

    I just did a quick search on the knowledge base and found a couple of examples for you wanted to do. I would suggest doing a quick search on there.
    Knowledge Base Example
    Knowledge Base
    Joe.
    "NOTHING IS EVER EASY"

  • How can i block purchasing from being processed

    just given 9 year old ipod but how do i stop her from buying loads of stuff from itunes tec. .

    The only thing you can do for now is change your message settings on your iPhone. I had to do the same thing. It disables all "iMessages" but not texts (you'd have to do that through your carrier). Go to settings, messages, then disable iMessage. Text message charges will apply with your carrier, but no big deal cause it's likely you already have a text message package on your plan. Just farewell to seeing when people are messaging you, but also farewell to creeper.

  • How to read the messages from the processed Batch session log

    Hi All,
    I am posting an accounting document through FB01 by submitting the report RFBIBL00 along with the file through which a Batch session gets generated in SM35.The Batch session is then processed by submitting the report RSBDCSUB. My code is as shown below:
    SUBMIT rfbibl00 WITH  ds_name = co_file_output
                      WITH callmode = co_batch AND RETURN.
    Process Batch session
      SUBMIT rsbdcsub
        WITH mappe = gv_name_jd
        WITH von   = sy-datlo
        WITH bis   = sy-datlo
         AND RETURN
    My requirement is to capture the document number from the log of the processed batch session. Can anyone suggest me how to go about this.
    Thanks in Advance,
    Vinay B

    Hi,
    check the routine read_bdc_log_plain in program rsbdc_protocol.
    get the data from table APQL and then use the logic.
            bapiret2-id = logtable-logmessage+74(16).
            bapiret2-number = logtable-logmessage+94(3).
            bapiret2-message_v1 = logtable-logmessage+100(20).
            CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
              EXPORTING
                id         = bapiret2-id
                number     = bapiret2-number
                textformat = 'ASC'
                message_v1 = bapiret2-message_v1
              IMPORTING
                message    = bapiret2-message.
            WRITE: (60) bapiret2-message.
    Edited by: Keshav.T on Apr 7, 2010 4:23 PM

  • How to save work seperate from background

    Hi,
    I want to know how to save the image that I created separately from the background so I can use the image as an icon or something else. I am new in web design, when I tried so hard to make something in photoshop I ended up the bloody back ground is 10 times bigger than my work (image) and it distorts the web layout.
    Bottom line, I need to know how to save something as an icon or maybe object without the dam white background.
    Craig

    <a href="http://www.pixentral.com/show.php?picture=11dSoqXtoYz8noH9N3wcEqawLKHfs1" /></a>
    <img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/11dSoqXtoYz8noH9N3wcEqawLKHfs1_thumb.png" border="0" />
    <br />
    <br />couldnt post psd file. The site doesnt seem working properly.
    <br />
    <br />Now you can simulate my steps by create a new layer/background by clicking new and chose default photoshop size then pick up custom shape tool, chose a shape to draw with, envelop is the case. Keep along with your instruction.
    <br />
    <br />Tell me do you have any problem saving it as the way we want ?

  • How to get the Role from a process

    Hi,
    I have a process where I have different role panes with human intervention activities. Each human intervention invokes a screenflow.
    Is there any method by which I can get the role pane from which an intance is generated
    For e.g. in process P1, I have 3 different role panes i.e. R1, R2, R3. Suppose there is an human intervention activity A3 in R3. It invokes a screenflow in which there are different methods. I want to get the roleId here i.e. R3.
    Through creation data I can know the instance creator i.e. participant ID, but a participant can have more than one role. I want to get the role from which the Human Intervention activity is invoked.
    Please suggest / help.
    Thanks
    Jayant

    Hey Thanks a tonn
    It works fine by the following code
    role = Activity.role
    logMessage "message"
    logMessage "Role: " + role.name
    role.id returns an int, so I used role.name
    Thanks and Regards
    Jayant

  • How do I suppress zeroes from being displayed in numbers?

    Hello,
    I am generating a calculated dollar amount in one column that is based on values in another column. If I apply the formula to the entire column, most of the values are zero dollar in standard currency format because most of the rows have yet to be populated. I would like to suppress these values from appearing. I tried the if clause but I do not know what function to use for the false value if the condition is to be greater than zero.
    Thanks,
    Vince

    double click on the cell that has the formula, it will appear next to the cell.

  • How to import a value from HCM process and forms to workflow?

    Hi Experts,
        i am new to HRASR_DT T.Code , I had  designed a form in Form scenario and process in that T.code . I linked that process with workflow. i had the Employee Number field in Form , i want to IMPORT that employee number into my workflow container element.
    Thanks & Regards,
    Malli.

    You use TS17900110 to extract values from the form into the workflow container. For any HCM P&F workflow, you should always start by looking in task group TS17900001. All the HCM P&F-related workflow tasks, etc. are contained there.

  • How to Trigger an Alert from a Process Chain

    Hi BW-Experts,
    i have implementated a custom process type. Then i choose my alert and activate the process chain. After this i make a double click on my process type, there is always a standard alert deposited (RNIF_ALERTS), but not my alert. What is my error? Thanks!

    Hi,
    See if the discussion in the following threads help :
    Raising an alert at the end of process chain execution
    Emails from Process Chains :
    Email from process chain
    Cheers,
    Kedar

  • How to run weblogic server in background process on Windows XP 2002 ?

    Hi,
    I have installed weblogic server 9.2 in Windows XP 2002, I want to start my weblogic server and instances in background and keep running .
    Can anybody please provide information on the same ?
    Thanks in Advance,
    Kartheek.

    Hi Kartheek,
    If you're new to running WebLogic as a Windows service, you'll probably find it a bit tricky at first. I found troubleshooting problems, especially start-up and process-crashes, awkward at first. If you have time, you may want to check these out:
    [ http://connectionserver.blogspot.com/2009/06/weblogic-as-windows-service.html|http://connectionserver.blogspot.com/2009/06/weblogic-as-windows-service.html]
    [http://e-docs.bea.com/wls/docs81/adminguide/winservice.html|http://e-docs.bea.com/wls/docs81/adminguide/winservice.html]
    -Jones

Maybe you are looking for