How do you add multiple cells to the LARGE function?

I want to add several cells which are contained on different sheets and tables to the same LARGE function and select the first ranking cell value.
How do I add these cells as a single argument for this function?

"...and select the first ranking cell value."
Hi eobet,
If your actual goal is as stated, you could use MAX, which will accept a list, a range, or a list of ranges as arguments.
LARGE accepts only a single argument to establish the set of values, plus a single argument to establish the rank of the desired value. That means you need to collect all of the vlues into a sngle contiguous group/range, then specify that range as the set. The avantage, ofcourse, is that with LARGE, you can specify that you want the 'third largest' value in the set.
Here's an example.
The data set is column B on tables Data 1 and Data 2.
The set is collected into a single contiguous range on the table Aux (which may be hidden, or placed on a separate sheet).
LARGE collects the nth value from the collected set in Aux, using this formula in the table Summary:
A2, and filled down: =LARGE(Aux :: A:B,ROW()-1)
MAX returns the largest value from the original data set on Data 1 and Data 2, using this formula on the table Summary-1:
A2: =MAX(Data 1 :: B,Data 2 :: B)
Regards,
Barry

Similar Messages

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

How do you add multiple iTunes to Keynote

How do you add multiple songs from the iTunes to your Keynote presentation?

Jer&Renee,
welcome to Apple Discussions.
It depends where you want them in your presentation.
Open the Media inspector and choose a playlist. In the list of entries, mark those you want to add to Keynote (use command-click to mark multiple titles not in one block).
Then drag the marked titles either on a slide or on the small Audio field (looks like a frame) in Document inspector. When you then hover the cursor at the Audio "frame", you'll see the quick info "Multiple Files". You cannot change the order or remove one of the files, but only all of them.

Solaris 11 IPS: How do you post multiple versions of the same package?

How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
http://pkg.oracle.com/solaris/release/
Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
Has anybody been able to do this? Is any documentation forthcoming?
Edited by: user13489824 on Jun 25, 2012 10:17 AM

dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
If I publish one package after another like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m
pkgsend publish -s http://localhost:1234 Appv2.p5m
Then only the second package shows up in the repository, as if it over-wrote the first one.
Running pkgsend with two manifest, like this:
pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
Both approaches are complete without errors but neither achieves what I am trying to do.
alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

How do you add multiple users to an itunes account

how do you add multiple users to an itunes account

First :
Using an iPhone without a wireless service plan
Then restore the iPod to factory settings/new iPod on the computer your kids will use:
iTunes: Restoring iOS software
If you are using the same computer
How to use multiple iPods, iPads, or iPhones with one computer

How do you make multiple folders in the photo app-

the question speaks for itself.also, how do you sync multiple albums onto the phone?

The way I sync folders is this (I know it may not be what you are looking for).
But in iTunes you can pick a folder to sync to. For me I made a specific folder just for my iPhone.
Any pictures I want on my iPhone I put in that folder (copies).
And then in that folder you can create subfolders (to organize). Note though you can only go 1 subfolder deep. You cannot put a subfolder in a subfolder.
So for example:
C:\DATA\iPHONE This is the folder for my syncing.
I can create
C:\DATA\iPHONE\FAMILY
C:\DATA\iPHONE\FRIENDS
C:\DATA\iPHONE\ABSTRACT
C:\DATA\iPHONE\NEWYEARSPARTY
But I cannot create
C:\DATA\iPHONE\FAMILY\WIFE
Then you just put pictures you want sycned into them. Sort of better to work with copies and have a folder specific for the iPhone I think. At some point you will want pics removed from your phone and far easier to just delete them from the iPhone specific folder than if you went to route of syncing to the folder you actually store photos you want to keep forever on your computer. Having a specific folder with copies means you can delete and add at will and know your real memories are elsewhere.

How do you highlight several cells with the mouse in numbers

how do you highlight several cells with the mouse in numbers

Hi David,
Using only the mouse, you can select a contiguous range of cells using the method described by dwb.
For larger (but still contiguous) ranges you might prefer this method:
Click the first (top left) cell of the desired selection.
Scroll to the last (botom right) cell of the desired selection.
Shift-click the bottom right cell to select it, and all of the cells in the rectangular array defined by this and the top left cell selected in step 1.
To select two or more non-contiguous cells:
Click on the first to select it.
Command-click on another to add it to the selection.
Repeat as necessary.
Regards,
Barry

How do you get multiple screens on the iPad with iOS 5.1.1?

How do you get multiple screens on the iPad with iOS 5.1.1? We just upgraded to iOS 5.1.1, and we see no way to be able to open multiple screens at once. Before, there was a small button in the upper portion of any window. That button would take you from a particular window to the place where multiple windows are open at once. Does it do it differently? Is there a special setting button that we have missed? Thanks!
One more thing: We are only talking about Safari.

Guitaristica-
I don't think I've seen a way to have separate Safari screens visible at the same time. The small thumbnails were deleted in one of the iOS updates, and replaced with a multiple "Tab" system.
You can open an additional screen in a new "tab" by pressing and holding on a link until a new menu comes up.
Fred

How do you add an image in the signature

Hi,
How do you add an image to the signature area.
The Insert/edit image is not available when in My Settings | Personnel Info | Signature
Regards
Ray Farmer

You need to link the image. See the example for the Canada flag below.
<img src="http://forums.ni.com/ni/attachments/ni/130/6908/1/Canada-small.PNG" border=0>
Replace with the image you like. This goes into the signature box within the profile tab of the personal settings.
RayR

How do you add a format to the "Date Picker Format Mask" available formats?

Hi,
When I select the Date Picker Format Mask or "Number / Date Format" they doen't have YYYYMMDD or others that may be desired...
How do you add a format to the available formats?
Thank you, Bill

Bill - From the popup help text:
If you need to create a Date Picker item, but the format you need does not appear in the Display As list, select Date Picker (use application format mask). When an application uses this type of date picker, the Application Express engine derives the date format from an item named PICK_DATE_FORMAT_MASK. You can populate this item in two ways:
- By defining an application substitution string named PICK_DATE_FORMAT_MASK
- By creating an application-level item named PICK_DATE_FORMAT_MASK
See the doc for more details.
Scott

How do you add an entry in the monitor log from the update rules?

How do you add an entry in the monitor log from the update rules?

Check this link for relevant SAP recommended implementation.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0c22e690-0201-0010-9581-832abdb5d50d
Sample Code (Routine) available on the last page of the document.
award points if useful

How do you add safari favourites with the new iOS?

How do you add safari favourites with the new iOS?

Do you mean you want to sync your desktop Safari bookmarks to iOS? This is done in iTunes when you sync the iOS device. There is a box to check to make this happen.

How do you add a mailbox to the iphone4s?

How do you add a mailbox on the iphone4s?

If you have an IMAP account, then add it on your server and it will appear on the iphone.
If you have a POP account then you cannot.

How do you add a grid on the viewer?

How do you add a grid on the viewer so you can lign up text and whatnot? Thanks!

I do just as you outline. It's covered in my article on Alignment Grids: http://forums.adobe.com/message/4319250#4319250
I also agree that the Snap Tto Grid would be nice, like in Photoshop. I have sent in several Feature Requests for Grids, with full functions, like Snap To, though not recently.
Hunt

How Do You Add Multiple CSS Rules to Text?

Hi everyone, I have these css rules in my css styles window they are all assigned to some text in a cell on my page.
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover <a>
.def14grey4 a:active <a>
.def14grey4 a:focus <a>
How do you add (all of) these styles to the text in the first place, I know how to add the first one (.Def14grey4), you select the text in the cell and choose the rule from the drop-down menu in the css panel, but how do you add the other ones to some text as well, so that it can have the same link properties.
Basically I have some more text elsewhere on the page and want to assign these rules to that as well.
thanks Gareth

You would want to change your order as shown here -
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover, .def14grey4 a:focus <a>
.def14grey4 a:active <a>
That way, the hover and the focus states are equivalent.
How do you add (all of) these styles to the text in the first place, I know how to add the first one
You don't really. The 4 bottom selectors say -
"find an element with a class of 'def14grey4', and style any link inside that element this way"
So, <span class="def14grey4"><a href="whatever.html">Whatever</a></span> would get the pseudo-class styles, as would any of the following -
<span class="def14grey4"><a href="whatever.html">Whatever</a></span>
<td class="def14grey4"><a href="whatever.html">Whatever</a></td>
<p class="def14grey4"><a href="whatever.html">Whatever</a></p>
<body class="def14grey4"><a href="whatever.html">Whatever</a></body>
<div class="def14grey4"><a href="whatever.html">Whatever</a></div>
<strong class="def14grey4"><a href="whatever.html">Whatever</a></strong>
and so on. These examples assume that there isn't some other more specific rule that would apply to the same links. You need to study up on the CSS cascade and specificity....

How do you add multiple cells to the LARGE function?

Similar Messages

Maybe you are looking for