How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

Similar Messages

  • Solaris 11 IPS:  How do you post multiple versions of the same package?

    How do you post multiple versions of the same software package on a single IPS instance(port)? Oracle was able to do it here with versions 151 and 175 of S11:
    http://pkg.oracle.com/solaris/release/
    Unfortunately, based on my searches, no where in the documentation (http://www.oracle.com/technetwork/server-storage/solaris11/technologies/ips-323421.html) does it explain to the development community how this is done. The best I can do is create pkg repo instances on different ports to host each different software version.
    We are trying to deploy an IPS repository for our drivers and utilities that our customers can link to and pull updates from. We have been able to post a software package to the repository using the command:
    pkgsend publish -s http://localhost:1234 -d ./ Appv1.p5m
    This posts the package on the IPS repository instance at port 1234 on the server. However, we would like to post multiple versions of the package on the server at the same URL. Why the same URL? So that our customers and end-users need only point to a single URL to pull down our software rather than having to add a new URL to the publisher list each time we have an update. We want at least 5 of the previous software versions to be available on the server. Posting each version of the application or driver on a different IPS instance on a different port will require customers to add multiple URLs to their publisher list and they also will not be able to initiate remote scans for updates.
    Has anybody been able to do this? Is any documentation forthcoming?
    Edited by: user13489824 on Jun 25, 2012 10:17 AM

    dhduvall: Thanks for your response. Yes, one would think that as long as the version numbers are different, you should be able to accumulate multiple versions of a package in a repository. It looks like Oracle has done it in their S11 repository unfortunately, as far as I know, they have not shared the steps on how to do this. I would like to publish two versions of the same package. I.E. two different manifests with two different fmri.pkg version strings and two different binaries.
    If I publish one package after another like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m
    pkgsend publish -s http://localhost:1234 Appv2.p5m
    Then only the second package shows up in the repository, as if it over-wrote the first one.
    Running pkgsend with two manifest, like this:
    pkgsend publish -s http://localhost:1234 Appv1.p5m Appv2.p5m
    Will cause pkgsend to combine the packages and manifests as if they were a single package... not what I am trying to do.
    Both approaches are complete without errors but neither achieves what I am trying to do.
    alan.pae: Thank you. Unfortunately, the link didn't really help. I've read Oracle's white papers and IPS developer guide so I'm familiar with the topics covered.
    Lex: Yes, I know. I specified the versions in the pkg.fmri value string.

  • How do you rename multiple files at the same time

    how do you rename multiple photo files with a name at the same time?

    This would be an excellent use of Automator. Here is a link to some instructions on how to do this using Automator.
    http://www.youtube.com/watch?v=Ie6zGxo2D-o
    If you don't like that then Google "Renmame multiple files Automator" and you will find many tutorials available.

  • How do you add multiple cells to the LARGE function?

    I want to add several cells which are contained on different sheets and tables to the same LARGE function and select the first ranking cell value.
    How do I add these cells as a single argument for this function?

    "...and select the first ranking cell value."
    Hi eobet,
    If your actual goal is as stated, you could use MAX, which will accept a list, a range, or a list of ranges as arguments.
    LARGE accepts only a single argument to establish the set of values, plus a single argument to establish the rank of the desired value. That means you need to collect all of the vlues into a sngle contiguous group/range, then specify that range as the set. The avantage, ofcourse, is that with LARGE, you can specify that you want the 'third largest' value in the set.
    Here's an example.
    The data set is column B on tables Data 1 and Data 2.
    The set is collected into a single contiguous range on the table Aux (which may be hidden, or placed on a separate sheet).
    LARGE collects the nth value from the collected set in Aux, using this formula in the table Summary:
    A2, and filled down: =LARGE(Aux :: A:B,ROW()-1)
    MAX returns the largest value from the original data set on Data 1 and Data 2, using this formula on the table Summary-1:
    A2: =MAX(Data 1 :: B,Data 2 :: B)
    Regards,
    Barry

  • How do I add multiple destinations on the same map?

    I'm planning a long trip and want to consider different routes with different stops on the way.  It seems like it should be a simple thing to add destinations, but how?

    Use another account where?  Let's say phone A is being synced to Mac A, and now you want to add phones B and C to Mac A, then they will all be syncing using the same account, the one used on Mac A.  Phones B and C can share apps and songs currently on Mac A's iTunes, but they will lose any apps, etc. that were previously put on them from other macs that use different accounts.  That's the way it works. If you want to keep the apps on B and C, then keep syncing them to their original macs.

  • How do you plot multiple curves on the same graph when using a while loop?

    I am writing a program that will plot the IV Output chracterisitcs curves for a MOSFET transistor. I have two sweep variables Vg and Vd. For each Vg valve selected, Vd is swept from its start to stop voltage creating a graph for that Vg valve. Both of the sweeps are done using while loops. Ideally I would like to display all of the Vg plots on the same graph while having the ability to do real-time graphing. Can anyone help me figure this problem out? I have attached my program. Thanks!!
    Tammy
    Attachments:
    outputfin2.vi ‏165 KB

    Hi Tammy & Tica T,
    As far as I see it - this thread is a very bad version of already existing bad version......
    http://forums.ni.com/ni/board/message?board.id=170&message.id=127857
    I expected, that an Applications Engineer from NI knows something about  a Transistor and how an Output characteristic looks like !!  Take a look to a typical Transistor Datasheet ( e.g. n-channel MOSFET) - you will see, that there is no relation of ID vs Time like in your example ( values vs time )  but  IDrain vs VDrain at different VGate's ( no relation to Mr. Bill Gates ).
    Find attached a vi, that in general does what you need - drawing of  curves vs x-axis (XY-graph in use)  - in test_sweep.zip.  And that you geet an impression, how it might be done ...... dynamic Output characteristic of a Transistor with Standard Equipment of a Lab ( Scope + Generator + Power Supply ) find in addition a Frontpanel - picture. One of the interesting points here is - the self-heating effect; visible on ch3 of scope - 5µs Pulse is already a very long time...... This measurement was done in order to compare with our own Transistors......... 
    Hope this helps a little bit to understand, what we are talking about.
    Regards
    Werner
    Attachments:
    test_sweep.zip ‏358 KB
    dynamic Transistor char.png ‏65 KB

  • How do you stop multiple users executing the same calc script at the same time?

    We have an issue when  users uplaod a spreadsheet and then run a calc script. at one time we have multiple exectuions of the script running.
    This slows up the system and we have to go cancel all the executions and run it again.
    Can we stop this and put them on a queue, so only one execution of the calc happens at one time. Or stop multiple executions getting submitted at all.

    You could use EXCLUSIVECALC to stop more than one calc running at the same time, although this will apply to all applications on your server.  And it doesn't just stop the same calc being launched twice.  Easier than the alternatives I can think of though, if it works for you.

  • How do I add multiple tickets under the same confirmation number from the American Airlines app to Passbook?

    I have a confirmation number from American Airlines for a flight with my family all under my name and for some reason I cannot add all of our tickets to Passbook. To clarify, I went to the American Airlines app and put in the confirmation number along with my name which pulled up my boarding pass only. Although I was able to add this boarding pass to Passbook, I was not able to add any of the other boarding passes for my children to Passbook that should have also been under the flight reservation. In fact I couldn't even see them in the American Airlines app. I tried to use their names and the same confirmation number but nothing happened, and nothing else seems to be working. How can I add all of these boarding passes to my Passbook?

    Fair enough.
    I started doing this before unlimited data and emails on phones was a common commodity, on my Samsung Blackjack.
    I then continued it due to its convenience. My only counter argument is this:
    Even when emails are set to immediately push, I am always notified earlier by this forwarding message (sometimes by several minutes/hours due to the fact that it is not dependent on my being connected to 4G or wifi to receive it.
    Also, to contradict snozdop's point that both methods use data and battery, I say this - when I use the forwarding method, the information comes in a pure text format and therefore uses considerably less information than an HTML and CSS rich email, with embedded images and such -also, unlimited text messages aids curve costs.
    I will, however, give this method a go. In any case, a solution to my original question would still be greatly appreciated.
    Thanks guys.

  • How can you delete multiple copies of the same songs without deleting one at a time?

    I have multiple copies of most of the songes in Itunes. How can I delete multiple copies without doing it one at a time?

    Select/highlight more than one at a time followed by selecting Delete.

  • How do you have multiple iPhones, on the same computer, and on the same iTunes log in?

    My wife has the iPhone 4 and rarely syncs (1 time in the last 6 months) to our PC, so I updated her phone when she synced.  I have the iPhone 4S and sync everyday to the same PC and same iTunes account.  She synced her phone to our PC yesterday and all of my info is now showing on her phone (apps, pictures, etc) ... I have researched and do not see a solution on how to fix this?

    First thing to do is make sure each device has a unique name. You can change the name displayed in iTunes by connecting the iPhone to iTunes and double clicking on the name of the device.. Then type a new name. Wife's iPhone and dads iPhone for example.
    Then when you sync a device be sure to carefully select those items you want on that device and deselect those items you don't want. After you have made the selections you want click on Sync or Apply.

  • How do you add another account onto the same computer that  has itunes?

    I want to add another account to my already existing account so that my dad can have his own music on the same computer with mine. can i do that? or should i just move all of my stuff to an another computer and just let him have the old one? i know this prolly sounds confusing but someone please tell me if i can do this!

    See if this helps: Using Windows XP User Accounts
    Creating a separate Windows User account for each person on your PC will give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one.

  • HOW do you display multiple componants with the same id e.g. same generated image

    Hi,
    I would like to display two of these with the same id (canvas) which is an image generated through AS
        <canvas:DrawingCanvas id="canvas" >
            </canvas:DrawingCanvas>
    This is an annotation program im working on, and i would 2 of the same view of image, the reason being that the user can view a large and small scale version of the image he/she is working with
    I--------------------I    i----i   - small version
    I                        I    i----i
    I large version   I
    I                        I
    I____________I
    thanks
    art

    You don't need the object to have the same id to achieve your desired results, and you can't have the same object with the same id anyway.
    Just ensure whatever the user does is carried out on the larger and smaller image.
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.stardustsystems.com
    Adobe Flex Development and Support Services

  • How do you check multiple apps at the same time in itunes?

    for syncing to the iphone...how can I check more than one app at a time...but not all of them.
    I can highlight them, but it doesn't check them.

    You have to go to each app that you want to select and select the app. There is no option to highlight/select multiple apps at once to check the highlighted/selected apps to be checked for transfer to your iPhone. By the time you go though and select each app followed by making another selection to check each app, you would already have each app checked.

  • How do you add multiple iTunes to Keynote

    How do you add multiple songs from the iTunes to your Keynote presentation?

    Jer&Renee,
    welcome to Apple Discussions.
    It depends where you want them in your presentation.
    Open the Media inspector and choose a playlist. In the list of entries, mark those you want to add to Keynote (use command-click to mark multiple titles not in one block).
    Then drag the marked titles either on a slide or on the small Audio field (looks like a frame) in Document inspector. When you then hover the cursor at the Audio "frame", you'll see the quick info "Multiple Files". You cannot change the order or remove one of the files, but only all of them.

  • How do you add multiple users to an itunes account

    how do you add multiple users to an itunes account

    First :
    Using an iPhone without a wireless service plan
    Then restore the iPod to factory settings/new iPod on the computer your kids will use:
    iTunes: Restoring iOS software
    If you are using the same computer
    How to use multiple iPods, iPads, or iPhones with one computer

Maybe you are looking for