How do you add multiple links to a rollover image?

Hi guys,
I'm pretty much a novice when it come to DW, but i understand some things and can get by with a simple website(i only use design mode).
Anyways, i understand how to use rollovers if its a basic image over image swap. My issue is, I have a link that says "T-shirts" and what i want is when you roll the mouse over that text, it swaps to another text -"1 or 2". Now on the "1 or 2" image, i want to have 2 seperate links on them. I tried using hotspots but to no avail. Everytime, the "1 or2" text comes out as a single link. Is doing this possible? I'm using CS4 if that helps btw.
Thanks!!

I think you're trying to make something that is more complicated than it needs to be... First, as far as I know there is no easy way to accomplish what you're trying to do with a single image...
The first option would be to split your initial image in half, and create a rollover effect on the left half on rollover with the specified link 1, and add a second rollover effect on the right side image so that it also changes. Do the same with the right half image - create the rollover effect along with the link for that image only, then add a rollover script that affects the left side image (I've attached a very basic sample to demonstrate in the zip folder - note that there are two rollover images - each with a separate web link, and each has a rollover effect that affects both buttons...)
Second option is perhaps using a "Dropdown" menu that (on rollover) shows two more links... there are many ways this can be accomplished - the easiest (in my opinion) is by using the "spry menu bar". Once created, you can adjust the colors, fonts etc., and an image could be replaced on the initial link within the css... (my website is still under construction, but hopefully will show what I mean: http://www.jgigandet.com/) If you google "drop-down menu html, you'll find several other alternatives to spry as well...
Hope that helps...
Jesse

Similar Messages

How do you add multiple iTunes to Keynote

How do you add multiple songs from the iTunes to your Keynote presentation?

Jer&Renee,
welcome to Apple Discussions.
It depends where you want them in your presentation.
Open the Media inspector and choose a playlist. In the list of entries, mark those you want to add to Keynote (use command-click to mark multiple titles not in one block).
Then drag the marked titles either on a slide or on the small Audio field (looks like a frame) in Document inspector. When you then hover the cursor at the Audio "frame", you'll see the quick info "Multiple Files". You cannot change the order or remove one of the files, but only all of them.

How do you add multiple users to an itunes account

how do you add multiple users to an itunes account

First :
Using an iPhone without a wireless service plan
Then restore the iPod to factory settings/new iPod on the computer your kids will use:
iTunes: Restoring iOS software
If you are using the same computer
How to use multiple iPods, iPads, or iPhones with one computer

How do you add a Christmas frame to an image in Elements 10?

How do you add a Christmas frame to an image in Elements 10?

In PSE 10, go to Full Edit mode.
Open your image.
Open the Content panel.
In the first dropdown choose "By Event".
In the second dropdown choose Christmas.

How Do You Add Multiple CSS Rules to Text?

Hi everyone, I have these css rules in my css styles window they are all assigned to some text in a cell on my page.
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover <a>
.def14grey4 a:active <a>
.def14grey4 a:focus <a>
How do you add (all of) these styles to the text in the first place, I know how to add the first one (.Def14grey4), you select the text in the cell and choose the rule from the drop-down menu in the css panel, but how do you add the other ones to some text as well, so that it can have the same link properties.
Basically I have some more text elsewhere on the page and want to assign these rules to that as well.
thanks Gareth

You would want to change your order as shown here -
.Def14grey4 <body>
.def14grey4 a:link <a>
.def14grey4 a:visited <a>
.def14grey4 a:hover, .def14grey4 a:focus <a>
.def14grey4 a:active <a>
That way, the hover and the focus states are equivalent.
How do you add (all of) these styles to the text in the first place, I know how to add the first one
You don't really. The 4 bottom selectors say -
"find an element with a class of 'def14grey4', and style any link inside that element this way"
So, <span class="def14grey4"><a href="whatever.html">Whatever</a></span> would get the pseudo-class styles, as would any of the following -
<span class="def14grey4"><a href="whatever.html">Whatever</a></span>
<td class="def14grey4"><a href="whatever.html">Whatever</a></td>
<p class="def14grey4"><a href="whatever.html">Whatever</a></p>
<body class="def14grey4"><a href="whatever.html">Whatever</a></body>
<div class="def14grey4"><a href="whatever.html">Whatever</a></div>
<strong class="def14grey4"><a href="whatever.html">Whatever</a></strong>
and so on. These examples assume that there isn't some other more specific rule that would apply to the same links. You need to study up on the CSS cascade and specificity....

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

How do you add a link to another website in you PDF using LiveCycle?

Can you add a link in your PDF in livecycle that opens a new window that that takes you to a predetermined website?

There may be simpler ways, but this is how I made my button.
Add the button.On the Object palette>Field page change appearnce of button to have no outline and no fill. Highlight the text and on the Font and paragraph palettes choose the correct look for your text (blue and underlined plus anything else you want) and change the text to what you want the link to say.
Then to add the URL, open your script editor (Window>Script editor) & choose "Langauge:Javascript" and "Run at:Client".
With the button chosen, choose the CLICK event (from drop down list, beside "Show") add the script:
app.launchURL("http://AND THIS IS WHERE YOU ADD YOUR OWN URL")
Hope that is helpful

How do you add multiple addresses from Mail to Address Book at once?

So let's say I receive an email to myself and 50 other recipients and I want to add those other recipients to my address book. Do I seriously have to go through and select "Add to Address Book" on each of the fifty contacts?! Tried doing a shift click which will highlight all contacts, but then when you right-click to get the "add to address book option" it only displays one single contact at the top of the menu. I know there is a way to add select and add multiple contacts to address book at once because I figured out how to do it once a long time ago and I still have the 67 card group to prove it. I just can't remember how I did it!!! Didn't think it'd be such a hard feature to re-discover. Would love some help on this! Thanks.
David

there is no built-in way to do this. the only way i know is by using Mail Scripts
http://homepage.mac.com/aamann/Mail_Scripts.html
it has a script "Add addresses" that does just what you want.

How do I add multiple links?

I know how to add a link to a button with the code snippets, but what I need to do now is add multiple choices, for example like a spry menu in html. I want something like:
Beans - green
           - lima
           - pink
           - fava
with each option going to its own page....How do I go about this in flash?
thanks for any help!!

How about a list or combo box component?

How Do You Add Multiple Pieces of Art to Albums?

I know that you can add multiple pieces of art to individual songs. However, when I click "Info" on an album (or when I select multiple songs), I can only add one piece of art. I want to add art from the front and back of a CD, but I do not want to have to do this by going song by song. Any ideas on how to do this quickly? Thanks.

there is no built-in way to do this. the only way i know is by using Mail Scripts
http://homepage.mac.com/aamann/Mail_Scripts.html
it has a script "Add addresses" that does just what you want.

How do you add multiple birthdays to one contact

I keep searching but it seems all the tips are old form previous versions or I am missing something. I am currently using Mac OS X 10.7.3
I am trying to add multiple birthdays in my Address Book under one person, thier family members and I want it to sync with iCal. I also did not see the Anniversary option in Address Book
Please help,
Thank you,

This has two parts. The second one, having the extra dates sync with iCal/Calendar, I don't (yet) know how.
The first one, though, isn't so hard. Go to Addressbook/Contacts preferences. Under templates, click on "Add field" and select "dates."
Now you can customize the template to default with "Anniversary" or whatever other nametag you'd like to give the date field or fields.
I'd really like to hear how, if it's at all possible, even, to have those sync in iCal/Calendar.

How do you Add a Link in Nav. Bar to a different site?

I would like to add a link to the Nav Bar that goes to a location of my choice. Is that possible in iWeb? If So, how?
Thanks
Neil

Here's a way to do it:
1 - create a blank page with the name you want to appear in the navbar.
2 - publish the site.
3 - edit the html file of the page and put the following in the head section of the file:
<meta http-equiv="REFRESH" content="0;url=http://www.the-domain-you-want-to-redirect-to.com">.
Replace the “0” with the number of seconds you would like to pass before the redirection takes place. Put in the URL of your destination site.
As long as you never make any more changes to that page or use the Publish All to MobileMe option you won't have to reedit the html file and add the code all over again. This is a demo of that feature with an 8 second lag.
Now the external page will be in your navbar.
OT

How do you add multiple cells to the LARGE function?

I want to add several cells which are contained on different sheets and tables to the same LARGE function and select the first ranking cell value.
How do I add these cells as a single argument for this function?

"...and select the first ranking cell value."
Hi eobet,
If your actual goal is as stated, you could use MAX, which will accept a list, a range, or a list of ranges as arguments.
LARGE accepts only a single argument to establish the set of values, plus a single argument to establish the rank of the desired value. That means you need to collect all of the vlues into a sngle contiguous group/range, then specify that range as the set. The avantage, ofcourse, is that with LARGE, you can specify that you want the 'third largest' value in the set.
Here's an example.
The data set is column B on tables Data 1 and Data 2.
The set is collected into a single contiguous range on the table Aux (which may be hidden, or placed on a separate sheet).
LARGE collects the nth value from the collected set in Aux, using this formula in the table Summary:
A2, and filled down: =LARGE(Aux :: A:B,ROW()-1)
MAX returns the largest value from the original data set on Data 1 and Data 2, using this formula on the table Summary-1:
A2: =MAX(Data 1 :: B,Data 2 :: B)
Regards,
Barry

How do you add multiple facebook accounts to iPhoto

I'm trying to add more then one account and I don't see how you can.

Is this to iPhoto on your Mac? If so maybe this topic will help :how do you sync more than one facebook account to iphoto?, how do you sync more than one facebook account to iphoto?
OT

How do you add a link to an image item

I have added an Image Item to a page and want to be able to add a link to that image but dont see any where you can put the link in the Image Item properties

One easy way to do this would be to add an image page, upload your image to the page, then create an html portlet with the appropriate tags to refer to the image and your link.

How do you add multiple links to a rollover image?

Similar Messages

Maybe you are looking for