How do you add notes to an iCal item

New user here.
I can create a calendar entry with start/end time, but when I try to Edit the entry, the "note" field is grayed out. So is the url field. And both have a grayed out "none".
So how do I add some text into a calendar entry?
Thanks!

If you click where it says "none", a text box will pop up for you to write in.

Similar Messages

How do you add new even to iCal? (and my spell check)

ok i am ********
in my last post i spelled mail as male....
Here is my question .. each time i try to add a new event to iCal i get a pop up window that says "You can not add events to MAIL calendar. "
I searched the helps menu and i did exactly what it says but each time i try to add an even i get the same pop up. And also on the pull down the add even is shaded out.

Dean,
Here is what iCal Help says about being unable to change an event or calendar.
If you can’t change an event or calendar, check the following:
If it’s a calendar to which you’ve subscribed, you can change the calendar name but you can’t change its events or to-do items.
If you were invited to an event, you can change only your status for the event, the calendar where the event appears, and the event alarm.
You can’t change or delete events on the Birthdays calendar. (To show the Birthdays calendar, select “Show Birthdays calendar” in iCal preferences.) To change the birthdays that appear, open Address Book (in your Applications folder) and make your changes there. For more information, in Address Book choose Help > Address Book Help.
If you can’t change a single event’s time zone or the iCal time zone, time zone support may be turned off. Choose iCal > Preferences, click Advanced, and then make sure the “Turn on time zone support” checkbox is selected.
If you want to change events on a calendar that you published on the Internet, but you’ve deleted the calendar from your Calendars list, you need to re-create the calendar with all its events, give it the same name as the published calendar, and then publish the new calendar. The new calendar will replace the previously published one.
If you can’t change an event for which you are the organizer, or you can’t change the attendee settings for an event you’ve been invited to, make sure all your email addresses are listed on your Address Book card (the card marked “me”).
1. Do any of those recommendations help you further define your problem.
2. Is there any reason you have not yet upgraded to OS X 10.5.3?
;~)

How to you add a checkbox as database item please?

I am trying to add a checkbox item as database item , and when I check it e.g , that value should be saved in the database .
It's not working . I check it but in the database , the value remains unchanged . Any help please ? Thanks.

To save the value of a CheckBox to a database table, your CheckBox item should be a Base Table Item. Your CheckBox Item type should match your table's column data type. For example, if your CheckBox's Check value is 'Y' and Unchecked value is 'N' then your table's column data type should CHAR(1) or VARCHAR2(1). Also, set the Check Box Mapping of Other Values to Not Allowed if your CheckBox will only be Y or N. Now, when you save your Form, the value of the CheckBox will automatically be saved to your table.
Can you please clarify what you mean by this please ?You have updated the On-insert and/or On-update triggers with the insert and/or update statements accordingly?>
My guess is that 987583 is referring to if your CheckBox is NOT a base table item, then you would need to use the On-Insert and On-Update triggers to update your database table correctly.
It is always best to base your Block objects on Table objects. Then Forms will do most of the work for you so you don't have to write code to perform DML.
Hope this helps.
Craig...

How do you add multiple emails to iCal group?

By using Edit Distribution List, I can specify which of several email addresses for one contact should be mailed as part of a Group. But what if I want to include more than one of the email addresses that is included in a contact (for example, both the husband and wife)? How do I do that?
Thanks.

I did figure this out, sort of, by adding a tab character to the beginning of each email address in my text file. Contact then let me import it, and I could select the field for the email address. So I've imported my list as a group of 700+ emails.
BUT now when I try and add that Group in the To: or Cc: or Bcc: fields in mail, it just disappears when I type it.
Any idea what's up with that?
thanks
Scott

How do you add other calanders to ical without having to view separately?

i know you view outside calanders of friends through ical by selecting window and then say shane's gmail but is there a way to view those calanders integrated into one?

For an application to appear in the Open With list that application must claim to be able to open the file type. If it doesn't, then the best you can do is assign it to open that particular file, or all of that file type, in your personal Open With preference. I suppose you could try hacking the Adobe product to make it claim to open the file type in question. The file you would need to hack is
/Applications/Adobe Photoshop Whatever/Adobe Photoshop Whatever.app/Contents/Info.plist
And you would need something appropriate to edit the file. I wouldn't recommend it unless you quite expert at this sort of thing.
Francine
Francine
Schwieder

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Thanks

Just uploaded iso7 , . . .hate it! Can you change background colours? How do you add a new item/activity to the schedule? In notes the font has changed, can I change it back and the link colour is now yellow instead of blue, can I change it? Yellow on white is harder to read. Thanks

Another question. How do you bookmark something. It was so easy before, why did they change it? Can I uninstall it?

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information. When you are done, click "OK."

TS3999 How do you get info entered into iCal and Contacts on an equipped iPhone to push back to an equipped MacPro? so far it's only a one way street Macpro to phone, and that's not what I was told it would be.

Hi, all.
How do you get information entered into iCal and Contacts on an equipped iPhone to push to an equipped MacPro? So far it's been a one way street Macpro to phone, and that's not what I was told it would be. I've been through all settings on both devices and see no way to do this. Help! If I synch the old fashioned way, what's going to happen?

First check that all your settings are correct, that contact syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the contacts you are adding are added to your 'iCloud' group and not an 'On My Mac', 'On My Phone' or other non iCloud group (you can do this by checking in groups), non iCloud contacts will not sync.
If you are sure that everything is set up correctly and your contacts are in the iCloud group, you might try unchecking contact syncing in the iCloud settings, restarting your device and then re-enabling contact syncing.
First check that all your settings are correct, that calendar syncing is checked on all devices (system preferences > iCloud on a mac and settings > iCloud on a iPhone, iPad or iPod).
Make sure the calendars you are using are in your 'iCloud' account and not an 'On My Mac', 'On My Phone' or other non iCloud account (you can do this by clicking/tapping the calendar button in the top left corner of the application ), non iCloud calendars will not sync.
If you are sure that everything is set up correctly and your calendars are in the iCloud account, you might try unchecking calendar syncing in the iCloud settings, restarting your device and then re-enabling calendar syncing settings.

How do you add full folders and not just individual files in the new itunes?

How do you add full folders and not just individual files in new itunes? i just reformatted my HD and went to add all my music and it's only letting me add files not folders!?!?

"Add Folder to Library" is still in the file menu, but you might need to bring up the menu bar to see the file menu.
If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:

How do you add non-Garage band instruments into a Logic project so that you can hear them on playback?

How do you add non-Garage band instruments (orchestral instruments) into a Logic Pro (8) project so that you can hear those insrtruments' sounds on playback? I've tried to understand and follow the Logic Pro 8 User Manual, but the process comes off as so complex and the writing so technical that it does not help but only confuses.
To be precise - I want to add instruments (orchestral) that are not offered in the current Garage band menu which is offered in the Mixer's channel strip menus for Logic Pro 8. To be clear, the instruments that are offered are Bass / Drum Kits / Guitars / Mallets / Organs / Pianos and Keyboards / Synth Basics / Synth Leads / Synth Pads. Most of these that I've tried seem to work and give their characteristic sound when placed in a particular channel and playback is clicked.
However - there is one orchestra instrument offered in the standard Logic Pro 8 Mixer channel menu and it's the item labelled "Performance - 000 flute 1 or 001 flute 1." And it is this instrument that presents a problem. When I click on it and choose it from the menu and enter it as the instrument of choice for a specfic channel / track in my Logic Pro project arrangement, when playing back the music for the overall piece this particular track, the flute, does not playback and produce the notes (Midi events) in the track in the sound of the flute. Instead, nothing comes out at all. I can't imagine why this does not work. Any ideas, anyone? Again, when choosing this instrument for a track and clicking the playback no flute sound is forthcoming. Why not? I have not tried them all, but when most of the other various types of keyboards, such as an electric piano or an organ, are chosen for a track the playback successfully renders the sound of these instruments. Why then does playback not produce the sound of the flute when it has clearly been chosen to play and sound the Midi events given it?
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max. Can someone please help me and, in simple English, describe the step by step process whereby presumably external sampled orchestral instruments can be successfully employed, in any given Logic Pro arrangement project, to render their characteristic sounds upon playback?
On my two Macs, one a laptop and one a much larger Mac, I have any number of the GSO (Garritan Symphony Orceshtra) and Vienna Symphony Orchestra instrument library samples - and yet - I've yet to figure out how to actually get them INTO a Logic Pro project of any kind! To put this as a question, even as a humble request, how can I make good use of these orchestral sample libraries in a Logic Pro project? Can someone steer my to a clear resolution of this issue. I'd sincerely appreciate it! Thanks all!
DavidBacon

DavidBacon wrote:
Anyway, the overall, larger issue for me is the inability I have to choose and get non-Garageband instruments (largely orchestral) to play the Midi events given on various tracks. If my guess is correct then technically, orchestral instruments not offered in the standard Logic Pro 8 Garageband Mixer channel menu are referred to as external Midi sampled instruments - still, IMHO the process is not clearly spelled out in the User Manual. The simple step by step process whereby a non-Garage band instrument, say an orchestral instrument, is placed in a channel replete with Midi event (notes) waiting to be played should be easy, logical and given in a simple to follow format, but is not.
What with all the talk of routes, busses, auxillary channels, GM devices, GM mixers, audio bins, libraries and audio files this Logic Pro User is confused to the max.
David, you understand that this is professional software and is not necessarily meant to be easy but is in fact designed to give the professional user as many choices as possible, that's why it's in the Pro Apps section. You WILL need to learn about buses, GM Devices, Audio Bins, Libraries...etc..etc if you intend to use Logic.
That said, you are looking in the wrong place in the channel strip.
May I offer you advice?
Go here:
http://documentation.apple.com/en/logicpro/
Open "Exploring Logic Pro" (a short PDF Document). Pay special attention to chapter 3. Also pay special attention to the included graphics of the channel strips.
I encourage you to read the whole document as it will clear up many things... even though it's a Logic 9 document.
Post back

How do you add multiple iTunes to Keynote

How do you add multiple songs from the iTunes to your Keynote presentation?

Jer&Renee,
welcome to Apple Discussions.
It depends where you want them in your presentation.
Open the Media inspector and choose a playlist. In the list of entries, mark those you want to add to Keynote (use command-click to mark multiple titles not in one block).
Then drag the marked titles either on a slide or on the small Audio field (looks like a frame) in Document inspector. When you then hover the cursor at the Audio "frame", you'll see the quick info "Multiple Files". You cannot change the order or remove one of the files, but only all of them.

How do you add an application event to the Applications Panel

How do you add an application event to the Applications Panel.
My previous post referred to .ashx files, and the problem seems that Firefox, by default, does not recognize a .ashx format being read by Adobe Acrobat.
Therefore there needs to be a way to add Applications and Events into the Applications Panel under Preferences

domdp wrote:
...I have Theme L selected and I get 10 icons along the left side and bottom....
...I am thinking I may be limited to 10 icons....
Gotcha... But actually its limited to 9 icons in the L theme as the Profiles icon is always present. From that screen hit the Menu key to display the bigger list of icons. Arange them so the first 9 icons are the ones you want to see on the L theme.

How do you add a Vertical scrollbar to a JTextArea?

How do you add a Vertical scrollbar to a JTextArea? This is what I've tried so far but it hasn't worked. I got that off of someone asking a similiar question here.
aTextArea = new JTextArea(10, 40);
JScrollPane scrollPane = new JScrollPane(aTextArea);
aTextArea.setText( " " );

JScrollPane(component)
this constructor will only show the scrollbar (vertical and/or horizontal) as needed..so, if the scrollpane viewport is larger than the component, then it will not show the scrollbar.
you can force the scrollbar to alway show
setHorizontalScrollBarPolicy(int policy)
setVerticalScrollBarPolicy(int policy)

How do you add a new scene to beginning without disturbing movie with music and beat markers?

How do you add a new portion to the beginning of your project without disturbing the rest of the project that already has perfectly place clips attached to beat markers with the music ?
I forgot to add a tittle intro before the music starts with the attached pictures. When I try to add the whole project goes out of sync.
I want to just add an intro without disturbing the entire project.
Thanks

Well, if you re-attach your background music under the first clip, the starting point will be at the start of that clip so I think it will still be in sync. If not it's simply a matter of nudging the music track a bit along the timeline. Comparing the audio waveforms of the two tracks should help with this. When its right you can delete the track in the background music position. Now you can add what you like before the first clip without affecting sync.
Geoff.

How do you add a MAC address to air port so it will recognize a Nest thermostat

How do you add a MAC address to anAir Port

In a v5 utility it looks different to a v6 utility.. and you should not be using MAC restrictions anyway, unless you have time controls. MAC filtering is not adequate security.
There are only two options Timed Access or Radius.. you cannot use Radius without a Radius authentication server.
Clcik the + symbol and add the MAC address.
Make sure the time limits are not restricted if you want permanent access.
BUT this is just the wrong way to do things. Use proper security WPA or WPA2 with a password. not MAC filters which are next to useless.
If you have issues getting your NEST to connect to the Airport, set the wireless name to correct SMB standard. That means short, no spaces and pure alphanumeric. The current name is probably not compliant to SMB network standards hence the NEST cannot connect.

How do you add notes to an iCal item

Similar Messages

Maybe you are looking for