How do you add the wireless keyboard

I bought the new iPad and a wireless keyboard bought the keyboard doesn't work with it. How can I make it work.

is it a blue tooth keyboard?
That's the kind that works with the iPad.
You may need to go into settings and turn bluetooth on. THen follow the pairing instructions on your keyboard (usually you turn the bluetooth on, your ipad will 'see' the keyboard, it'll tell you to type a series of characters on the keyboard adn then the devices will be paired.)
once they are paired, the ipad will default to the bluetooth keyboard anytime it senses it, which means the on screen keyboard will not pop up as long as the blue tooth is sensed and active.

Similar Messages

How do you sync the wireless keyboard with the Ipad? It doesn't ever find

How do you sync the wireless keyboard to the Ipad

Have you read the iPad manual (Page 22)?
http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
and the Bluetooth Keyboard manual:
http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual).

HT201178 How do I use the wireless keyboard to edit my iPhone contacts?

How do I use the wireless keyboard to edit my iPhone contacts?

Type in the field for first name, last name etc. When you're ready to go to the next field, hit enter/return.

How do you add a wireless printer to iPhone 4?

How do you add a wireless printer to your iPhone4?

You can't print from your iPhone to just any wireless printer.
See here:
AirPrint Basics
Also, some printer manufactures make apps that will allow you to print to their printers.
Check the app store.

How do you recharge your wireless keyboard

how do you recharge your wireless keyboard?

You don't, you replace the batteries. http://support.apple.com/kb/HT3903

How do you add the ipad device to your itunes account? Please!!

How do you add the ipad 2 device to your itunes account

There is no need to add the iPad, just sign into your iTunes account when you need to.

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

How do you add the name of a song to a downloaded track not reccognized in the iTunes library. I copy songs from my own CDs and want to properly identify them instead of the current "Track 02". Thanks

Right-click the track in your library, Get Info, go to the Info tab, and type in the correct information. When you are done, click "OK."

How do you add the Adobe Add-In into Visio 2013?

I have used Adobe with Visio and created PDFs from older versions of Visio 2010 that have the layers in the PDF. I am unable to do this with Visio 2013. Can Adobe Acrobat XI Pro support layers for Visio 2013? how do you add the Adobe Add-In into Visio 2013?

Sabian,
My version of Visio 2013 is 64bit, that because my PC and most of the software is 64bit. When I try to install the add-in for Visio it had error message of not being compatible. I try your "Compatible web browers and PDFMaker applicatios" and notice that Visio 2013 64bit in not listed.
When I try Adobe Acrobat support they told me they don't support Visio 2013 64bit. They didn't say if or when they were going to support Visio 2013 64bit. They suggested I use the Acrobat community forum on "Acrobat Feature Requests" and request the add-in for Visio 2013 64bit. I am not happy with this.
Do you know of any third party PDF that supports layers for Visio 2013 64bit?

How do you add the language of the dictionary in pages for the whole document?

How do you add the language of the dictionary in pages for the whole document. When I add the british language it does not stay ON for the whole document. It goes back to "none"???? I am using pages 09 version 4.1 (923).

This is a feature of Numbers. If you repost on the iWork forum you may get more information.

How do you add the contact who sent out a group text?

How do you add the contact who sent out a group text? Also, how do you reply to the sender without having to reply to everyone in the group text?
Thanks

bmm243 wrote:
Is this feature equip for apple phones?
No.

How do you add the motion path of a tracking point to a separate clone stamp?

How do you add the motion path of a tracking point to a clone stamp without the clone stamp assuming the same initial/continuous positions of the tracking point?
Is there a way to keep the clone stamp's initial position and then add the path onto it?
I am using the clone stamp to remove unwanted duct tape that was used to keep lights on a wall.

I have spent two days trying to find a solution to this exact same problem. I have seen some overly complex solutions that probably work but trying to figure out the explanations is like trying to understand someone describe drag coefficients of rotary wing aircraft. While I am sure they work, they are way above my comprehension. I wanted an intuitive and straight forward solution for something that shouldn't require some arcane technique to fix.
What I did:
1) I used the Clone Stamp tool to paint over the spot on the wall I wanted to remove.
2) picked a more easily discernible point of reference for Tracking. In my case, I used a poster on the wall.
3) As per the instructions here, https://www.video2brain.com/en/lessons/removing-an-object-with-clone-stamp, I pasted the Attach Point data from the Tracker into Clone -> Transform - > Position
However, that didn't work for me as the object I was painting was not the object I was tracking. The solution from the video was simply moving my cloned spot to the tracked object instead of leaving it where I wanted it. So...
4) I then manually adjusted the Anchor Point of the Clone back to the original spot I wanted to cover.
I played footage and the cloned region successfully moved with the spot I was covering.
This is what I was able to figure out. I'm not an advanced user. I only use After Effects every couple of months when I need to fix minor things in footage, so I've only learned to use what techniques I need for the job at hand. No doubt, experienced users may shake their heads at my simplistic fix. I'm sure my technique would be wholly inadequate for situations far more complex than fixing spots on a gray wall, which is why my eyeballs cross when reading suggestions that seem way more involved than one would expect for something as seemingly minor as this. It's just a spot! It should be super easy to remove, right? Well, that's what I was looking for and that's what I came up with. I hope it helps.

HT4111 how do you make the hippih keyboard pair with an ipad

how do you make the hippih keyboard pair with an ipad

I know this question is old but I just found out the real answer. After you turn on the little switch on the left side of the HIPPIH AppsKey Keyboard and the blue light blinks, I want you to look just above it. Do you see that hole right above the word PAIRING? Go grab a paper clip and press down in to the hole for about 2 seconds. This sends a signal to the ipad and in the BLUETOOTH menu you should see "Keyboard" under DEVICES. Click on it and dialogue box will pop up asking you to put in a passcode for the keyboard.
It took me way too long to figure this out.
Stupid recessed button.

How do you ADD a Wireless Client PC to your Airport wLan?

If no security is enabled on the airport extreme 802.11n
PCs and Macs can get online easily
As soon as I enable WPA or WPA2
my macs can get online using the password
my PCs want a network Key of a specific length and hex format
and my airport utility app offers a phenomenally long 'equivalent' network password which does not make any of my PCs happy...
There is also an option of adding a wireless Client (a menu item in the airport utility app) but it closes the page as soon as I click on the menu item - I have NO ACCESS to this feature... something of a bug in airport utility version 5.2.2
the option is supposed to be add a Client using a PIN or simply add the first client to connect... NEITHER of these features work - the airport util software simply refuses to load that config page!
what gives?
how can we solve this?

Here's a wonderful piece of info that could help all of us...
Many wLan cards on the PC side don't seem to like WPA2
so you can resolve that issue by selecting WPA in the Airport utility
If you are using WPA / WPA2 on the airport extreme
then... go grab a PC
yes, I said a PC... ARE YOU LISTENING APPLE?
on the PC, you need to install the software that came with your Airport Extreme 802.11n... it looks the same as the SW on your trust Mac
but the thing is, it actually works when you want to ADD a new Wireless Client to your network.
now... when the PC has the software up and running and you can see your Airport extreme - ADD A WIRELESS CLIENT but don't use the PIN method - that method failed 5 out of 5 times I tried... Use the First Attempt method..
You will likely get an error but ignore it and go to the wLan connection app in your windows taskbar (bottom right side) you will want to VIEW Wireless Networks available to you.
If you see your airport, great, click the CONNECT button and the app will ask for your NETWORK KEY
Just enter your Wireless Password (the same one you used to configure your Airport Wireless Security on the WIRELESS page of the Airport Utility)
then click connect and voila... all 6 of my PCs were able to access via WPA
I am stunned that I wasted so much time with this
and concerned that Apple's software acts differently on the PC allowing me to ADD users whereas the Mac application simply would not load the page
in case you are wondering I used the following versions for this time wasting exercise
Mac: Airport Utility v5.2.2
PC: Apple Airport Utility for Windows v5.0
gosh what fun this has been
on the Mac ADDING a wireless Client failed (see my post earlier)

How do you reset the special keyboard function keys?

I used to use an older external keyboard that had Dashboard as F4. Now I got a newer keyboard that has Launchpad as F4. I was used to the old way, so I went into the keyboard shortcut for Dashboard and set it as F4. To my disappointment, however, it only works when I hold 'fn'. (I didn't expect this, as when the key was set to F13 holding fn wasn't required.) So anyway, that is even worse, and I wanted to change it back. However, it wouldn't let me. (In Launchpad & Dock > Keyboard Shortcuts, there used to be a checkmark next to Show Launchpad with a blank area on the right, but now when I try to click Restore Defaults, it forces me to choose a key... and pressing F4 without holding fn doesn't register.) And I know I can make it use all function keys as standard function keys, but not just for F4. And if I do it for all of them, I lose the other keyboard controls and I don't want that. I don't want to have to be stuck with the FunctionFlip 3rd party tool forever... How can I actually reset they key (or ideally, make it bring up dashboard without holding down fn)? You'd think that if it's so simple to change a setting one way it would be simple to change back. I'd even delete some prefs file if i had to.

I figured out that if you remove the ~/Library/Preferences/com.apple.symbolichotkeys.plist file and restart, that restores the keyboard.
Second question: Is there any way to make F4 (without holding fn) bring up Dashboard on Lion that doesn't require FunctionFlip? If it matters, I have a Time Machine backup of the symbolichotkeys.plist file from when I had the older keyboard.

How can I make the wireless keyboard work

MMy wireless keyboard was working when I purchased it it at the end of dec. now it's not working.

Please post more details.
Is your keyboard an Apple keyboard. Did you buy it new. Was it in its original packing. Where did you buy it from?
Have you recently put in new batteries. What brand are they?

How do you add the wireless keyboard

Similar Messages

Maybe you are looking for