How do you adjust speed of clip? (Slo-mo)

Thanks for any help!
P.S. if anybody knows anything about masking I could use some help. Basically I have an actor and I want to key an explosion behind him. I mask him and key in the explosion but how to I keep adjusting the mask frame by frame. When I move the cursor to change the next frame mask it changes the last one. Anyway thanks for any advice. Just got AECS4 trail a few days ago.

You've got a few options. including time-stretching, time-remapping, and the Timewarp effect. See the
"Time-stretching and time-remapping" section of After Effects Help on the Web for details.
Here's an
After Effects Community Help search for slow motion.

Similar Messages

How do you adjust CPU ratio?

System Specs:
Intel Core 2 Q6600 (G0)
MSI X48 Platinum
BIOS: v2.3 (07/07/2008)
How do you adjust the CPU ratio in the Cell Menu? It is not greyed out, but I can't seem to change it to anything. It talks about Speed stepping technology needing to be disabled, but from what I can tell that is under the DOT Control stuff which I have disabled. Any ideas?

Quote from: snits on 07-August-08, 05:48:43
I just read in another thread that you need an extreme chip or an engineering sample to do this. Is this true?
That is only if you want to apply higher MP than default one.
Quote from: snits on 07-August-08, 05:53:23
I will give it a shot again when I get back home. Thanks

How do you add a video clip to a slide show?

How do you add a video clip to a slide show using elements 12?

You can import some very short video clips into Photoshop and make gifs. I can import short (10 second or so) .mvi video clips I've taken with my point and shoot camera.
Use File ->Import->Video Frames to Layers
CS3 doesn't recognize .mvi files until you enter *.* in the box, hit load, then find the file you want.
After the file has been loaded, go to Windows, and check Animation.
After the Animation bar loads, go to the right side arrow, check Make Frames from Layers.
Then Save for Web and Devices, and you've got your gif.
I find it much easier to use the separate software.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

In iMovie 11, how can you cut/paste a clip that has subtitles and actually have the subtitles get cut/pasted. When I try, the subtitles disappear into the void and I have to do the subtitling all over again.

If you think this is a bug, you can report it here:
Apple - Mac OS X - Feedback

How do you adjust the lenght of a transition?

How do you adjust the length of a transitions? I'm trying to adjust a video and audio fade in and fade out at different lengths.

Video transition durations are controlled in the 'Project Properties.'

How do you move a sound clip in the timeline?

I have not had this problem before. I have put many songs into the timeline, and repositioned them. Today I pulled up a project and attempted to reposition a song to fit in better with the clip, and I'm unable to do so. I can't select the song, or anything else. Obviously I have set or locked up this track, and I can't figure out how to unlock if that is what I have done. I have 6 songs on that track, Audio track 2, and I can't reposition any of them. I can't even remove them from that track. What am I doing wrong?

Hunt, most of my music files, over 9000 songs, are mostly mp3 files and a few are wma, and because of copyright laws I wouldn't use them in a commercial project I'm working on anyway. When I am working on a project for a client I will generally use higher quality WAV files. This project was being done just to learn some new techniques, gain some more experience with PPCS4, and expand my knowledge with the program. I have this huge number of music files and styles to work with, so I can do a great deal of experimentation to see what different songs can do to the mood of the video.
As a test, I did put the exact same songs into the timeline on a different audio track. The problem track is audio 2, and I duplicated those songs on audio 3. I did the exact same editing. I faded them in and out the same as before. Split one song into 3 sections had parts of it come in and out over a video section of 9 minutes duration. They are working perfectly. I was just working on one section of that project a half hour ago, and I was still able to select and move each of the four songs on that track any way that I wanted to. However, the track just above it in that same timeline, Track 2, is still frozen.
Hunt, just a moment ago I solved my problem. Still not being that familiar with the program, two days ago I know that I was playing with all of the controls, and I obviously hit one of them without knowing one of its side effects. I hit the show "show track keyframes". I'm sure that you know it, but I didn't realize that when that function is selected, you can't do much else with the track but play with those keyframe. Even though I didn't have the track locked, in the traditional way, it was still, for all practicall reasons, locked. I unchecked that function and now everything is back to normal again on that track.
Something very simple, as many things turn out to be when you understand it. However, maybe someone else will make the same mistake, and my posting here will help them.
I will use your suggestions for using .WAV files. Thank you again.
Terry Lee Martin
Date: Mon, 7 Sep 2009 14:29:37 -0600
From: [email protected]
To: [email protected]
Subject: How do you move a sound clip in the timeline?
Terry,
What is the purpose of using the .WMA files? I'm sure that you have a good reason, but they can be problematic, at best. I only use them as a trasfer medium, when I need to get a DD 5.1 SS soundtrack into Audition for editing. There, I break them out into 6 discrete .WAV files, edit in Multi-track Mode and then usually Export as the 6 discrete WAV's to be encoded to DTS, or similar.
If you do not have a compelling reason for using the .WMA, try PCM/WAV @ 48KHz 16-bit and see if the issues go away.
Good luck, and let us know how it goes please,
Hunt
>

How do you adjust the font size for the tabs and icons around the screen?

How do you adjust the font size of tabs and and icons to ake them larger?

sfcalling
Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
Please let us know if you are OK with the details.
Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
Adobe Premiere Elements 11 * Creating disc menus
By the way, what computer operating system is your Premiere Elements 12 running on?
Thanks.
ATR

How do you adjust the duration of audio loop?

How do you adjust the duration of the audio loop that you can setup to play in the main menu?

Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

How do you adjust the brightness on a Thunderbolt Display

How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare - thanks Andrew - got me there. It seems daft!
The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
So:-
Apple menu >
System Preferences>
Displays>
Click Arrangement [at the top]
Click Mirror Displays [at the lower left]
That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
Hope this works for others.

How do you adjust the number of rings before the incoming call goes into voicemail?

How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

Set by your carrier, so contact them.

How do you adjust the timing in the animation pane to 2 minutes

How do you adjust the timing in animation? I need 2 minutes for slide

Since you did not mention which app you are using for animation, the only thing I can suggest is to check the apps Preferences. That is usually the place to make changes.

How do you adjust the bass in the iMac 27" (late 2012) ?

How do you adjust the bass in the iMac 27" (late 2012)?
I am watching Youtube and the bass is very distrubing. Isn't there a way to adjust this on an iMac OSX?

AFAIK, you can't with the internal speakers. Contact Apple's Support, formerly Apple Express Lane, and see what they say.

How do you adjust settings or is this not even possible with this new program?

I just loaded 4.1. How can you adjust settings with this new thing or is it not even possible? Like how can you adjust bitrate or do you have to use the templates as is?

I'm not sure what the weird button you mention is. You mean the gear button?
In any event, and as you've found out, the answer is yes. Create a custom setting – either by duplicating a preset, or using the plus button in the settings pane. Depending on the format, the available adjustments will be different they're accessible from the Inspector.
Russ

How do you adjust space between rows?

Hi guys. How do you adjust the space between rows. My table have no boarder between rows and no matter how I adjust the row height and cell margin. The generated report will still have the same amount of space between rows. Please help, thanks!

I had the same problem - I was trying to insert a row solely for spacing purposes, and tried adjusting the size using table properties->row->and setting the row hieght is to "exactly". This didn't work for me. The row still rendered larger than I set the row size. So I tried I changing the font size of the row just using the toolbar, and when I did that and ran the report, the row actually rendered the size I wanted.

HT4515 How do you adjust how long the iphone rings for before going to voicemail?

How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

I believe you do that through your phone service provider. I wonder if you have unheard messages in your voice mailbox. I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
I do not believe you can change this directly on your iPhone.

How do you adjust speed of clip? (Slo-mo)

Similar Messages

Maybe you are looking for