How do you adjust the duration of audio loop?

How do you adjust the duration of the audio loop that you can setup to play in the main menu?

Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

Similar Messages

How do you adjust the lenght of a transition?

How do you adjust the length of a transitions? I'm trying to adjust a video and audio fade in and fade out at different lengths.

Video transition durations are controlled in the 'Project Properties.'

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

In iMovie, how do you modify the duration of all the clips at once?

In iMovie, using Mavericks O/S, how do you modify the duration of all the clips at once?

To set the duration of any clips to be added in the future select the project then "Settings" above the viewer. Adjust the slider to the right of "Clips" to the desired duration.
To change clips already in the timeline, select all of the ones you want to change (so they have a yellow border), click on "Adjust" then click the info button (i in a circle). You will see "Duration:" Set the time in seconds and press return.
Geoff.

How do you adjust the font size for the tabs and icons around the screen?

How do you adjust the font size of tabs and and icons to ake them larger?

sfcalling
Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
Please let us know if you are OK with the details.
Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
Adobe Premiere Elements 11 * Creating disc menus
By the way, what computer operating system is your Premiere Elements 12 running on?
Thanks.
ATR

In the latest version of iMovie how do you change the duration of the clips

In the latest version of iMovie how do you change the duration of each clip?

Try 'window' (in the menu bar)>movie properties>settings
http://help.apple.com/imovie/mac/10.0/#mov4e66c1a8b

How do you adjust the brightness on a Thunderbolt Display

How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare - thanks Andrew - got me there. It seems daft!
The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
So:-
Apple menu >
System Preferences>
Displays>
Click Arrangement [at the top]
Click Mirror Displays [at the lower left]
That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
Hope this works for others.

How do you adjust the number of rings before the incoming call goes into voicemail?

How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

Set by your carrier, so contact them.

How do you adjust the timing in the animation pane to 2 minutes

How do you adjust the timing in animation? I need 2 minutes for slide

Since you did not mention which app you are using for animation, the only thing I can suggest is to check the apps Preferences. That is usually the place to make changes.

How do you adjust the bass in the iMac 27" (late 2012) ?

How do you adjust the bass in the iMac 27" (late 2012)?
I am watching Youtube and the bass is very distrubing. Isn't there a way to adjust this on an iMac OSX?

AFAIK, you can't with the internal speakers. Contact Apple's Support, formerly Apple Express Lane, and see what they say.

How do you adjust the earpiece volume on my 5s, the button has no effect? Is it as I suspect, the phone is faulty or am I missing a trick somewhere?

How do you adjust the earpiece volume on my 5s, the button has no effect? Is it as I suspect, the phone is faulty or am I missing a trick somewhere?

Thank you for the reply.
ctrl B makes the top bar (File. Edit. View. Controls. Store. Help.) appear and disappear.
ctrl S makes a side bar appear on the left side of iTunes. It shows the library which has Music. Movies. TV Shows. Apps. Playlists. Ect.
When I did the steps you suggested, my iPhone did not show up in that list.
I checked my firewall settings again, and they seem to be okay. My firewall is the only thing that I am not 100% sure of. If I go to Control Pannel>System and Security>Windows Firewall>Allow an app through Windows Firewall. It shows that iTunes is allowed. I'm not sure if something else might need to be allowed as well though. I have a few Remote options that are not allowed such as, Remote Event Log Management, Remote Scheduled Tasks Management, Remote Shutdown, Remote Volume Management, and Routing and Remote Access. I'm not sure if any of these need to be allowed or not, or if they are even affiliated with iTunes.

How do you edit the duration of multiple still images?

FCP X has a default duration for still images when you import them. After importing, how can I edit the duration of multiple clips?
I've tried selecting them all, control-click and change duration, but nothing changes.
BTW I want to make them 5 frames each...
thanks for any help
Craig

Thanks Tom, I've tried that. and nothing happens.
I presume that I type the 5 in the number sequence thing above the timeline?

How do you adjust the timings of a video placed in a drop zone?

Hi,
I brought a template online and have dropped a video into one of the drop zones. It plays fine, although I would like it to start in a different place and fade the sound in and out.
How do I go about doing this?
Thanks

Trim the Out point of your video so that the entire clip is not in your project (this is so you can slip the video and audio). This step may or may not be necessary if the drop zone is not the same length as your video clip.
Open the timing pane (F6). Hold down OPT while dragging the layer to slip the clip in the project. This will also slip the audio. Once you have it in the right spot, click the audio display button at the bottom of your timing pane (it looks like a little speaker). This will show you your audio track.
Select the audio layer and go to add behavior/audio/audio fade in out. In the inspector, adjust the behavior to taste.
Andy

How do you determine the duration of the project?

I want to know the duration of each project that I've
created. When I open the project, there is an information section
that tells me the size of the project, the time, the resolution,
number of slides, etc. It is telling me that this project is 5
minutes and 30 seconds. When I click on advanced audio, it lists
the time length of each slide. When I add those numbers up, the
presentation is over 11 minutes. Which one is correct. What is the
best way to find out the length of a project?

Hi Brock22
I think I'd lean toward using what you see in the information
section.
Consider this:
What you see in the advanced audio part is showing all audio
used in the .CP file. this means background audio (which normally
plays at the same time as other audio) as well as object level
audio (if you decide to show object level audio by clicking the
proper check box). And object level audio plays at the same time as
slide and background audio.
Hopefully this helps... Rick

TS3276 how do you adjust the line spacing in incoming mail messages?

Some of my mail messages are so compressed they are unreadable. Does anyone know if this can be adjusted? If so, how????????
Thanks!

Leading is the spacing between lines. In the Print module, when you scroll to the Type feature, make sure you have the extended the Type arrow (shown below), as well as the character menu (also shown below).
When you have that extended, you will see the leading slider, as well as auto leading button. please adjust those as you wish.
I hope this helps,
thank you
Janelle

How do you adjust the duration of audio loop?

Similar Messages

Maybe you are looking for