How do you adjust the width of the panel bin?

I just got Elements 9.  In the earlier versions you could drag the line that separates the panel bin from the rest of the workspace to adjust its width.  Also, you could double click the center of this same separator line to minimize the panel bin.  Once it was minimized you could bring the bin back by double clicking the line on the far right edge of the screen.  That does't seem to work anymore in Elements 9.  I see where you can minimize the panel bin by unchecking it under "Window" in the menu bar, but double clicking was a lot faster and I haven't been able to figure out how to adjust the width.  Any help would be appreciated.  Thanks.

Thanks for the response.  Too bad you can longer adjust the width.  I used that option a lot on my earlier versions.   Oh well, I am sure there are other improvments that more than make up for it.  Thanks again.

Similar Messages

  • How can you adjust vertical photos in the interactive image widget?

    It appears that adding a vertical image to the Interactive Widget automatically crops the top half of the image and won't let you adjust the default view.
    Anyone else having this? Solving this?

    Same problem. I cannot move the default position of the image. If you hide the Title, then at least the full image is visible, but it cannot moved and it is aligned to the top of the image area.

  • I can no longer adjust the width of the Bookmarks Sidebar, how do I fix this issue?

    In the past I could hover my mouse arrow over the slider vertical bar to the right of the sidebar and get a 2 headed arrow that I could use to adjust the width of the Bookmarks Sidebar but that stopped working. I need to fix this issue. What do I need to do?

    Maybe something you installed to Firefox messed up that feature.
    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • How do you adjust the lenght of a transition?

    How do you adjust the length of a transitions? I'm trying to adjust a video and audio fade in and fade out at different lengths.

    Video transition durations are controlled in the 'Project Properties.'

  • How do you adjust the font size for the tabs and icons around the screen?

    How do  you adjust the font size of tabs and and icons to ake them larger?

    sfcalling
    Click on the text in the menu so that you see the bounding box around it. Look to the right of the Movie Menu customization workspace, Adjustments Palette, Text and edit your text font style and size.
    In this screenshot, "Glass Flowers" text in the main menu is selected and its Adjustments Palette Text editing opportunities are shown. To do comparable editing in the scene menu, click on the scene menu in the bin to bring its image up to the screen.
    Please let us know if you are OK with the details.
    Please also review the following Adobe document on disc menus which applies to both version 11 and 12.
    Adobe Premiere Elements 11 * Creating disc menus
    By the way, what computer operating system is your Premiere Elements 12 running on?
    Thanks.
    ATR

  • How do you adjust the duration of audio loop?

    How do you adjust the duration of the audio loop that you can setup to play in the main menu?

    Your best bet is to bring your audio into DVDSP at the length you need it. You can adjust the menu loop time in the inspector but this also adjusted your video as well. DVDSP is not an editor - only an authoring tool All adjustments need to be made outside the tool.

  • How do you adjust the brightness on a Thunderbolt Display

    How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

    I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare  - thanks Andrew - got me there. It seems daft!
    The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
    At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
    So:-
    Apple menu >
    System Preferences>
    Displays>
    Click Arrangement [at the top]
    Click Mirror Displays [at the lower left]
    That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
    Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
    Hope this works for others.

  • How do you adjust the number of rings before the incoming call goes into voicemail?

    How do you adjust the number of rings on the iphone before the incoming call goes into voicemail?

    Set by your carrier, so contact them.

  • How do you adjust the timing in the animation pane to 2 minutes

    How do you adjust the timing in animation? I need 2 minutes for slide

    Since you did not mention which app you are using for animation, the only thing I can suggest is to check the apps Preferences.  That is usually the place to make changes. 

  • How do you adjust the bass in the iMac 27" (late 2012) ?

    How do you adjust the bass in the iMac 27" (late 2012)?
    I am watching Youtube and the bass is very distrubing. Isn't there a way to adjust this on an iMac OSX?

    AFAIK, you can't with the internal speakers. Contact Apple's Support, formerly Apple Express Lane, and see what they say.

  • HT4515 How do you adjust how long the iphone rings for before going to voicemail?

    How do you adjust how long the iphone rings for before going to voicemail? Mine diverts after only a couple of rings.

    I believe you do that through your phone service provider.  I wonder if you have unheard messages in your voice mailbox.  I think some carriers use that mechanism - diversion to voicemail faster if the recipient has unheard messages.
    I do not believe you can change this directly on your iPhone.

  • How do you adjust resolution on the iPad for viewing You Tube?

    How do you adjust resolution on the iPad for viewing You Tube?

    fire up youtube app>click video>on the video theres three dots … but vertically>click on it and click the first option its a settings symbol>choose resolution

  • How do you adjust the earpiece volume on my 5s, the   button has no effect? Is it as I suspect, the phone is faulty or am I missing a trick somewhere?

    How do you adjust the earpiece volume on my 5s, the   button has no effect? Is it as I suspect, the phone is faulty or am I missing a trick somewhere?

    Thank you for the reply.
    ctrl B makes the top bar (File. Edit. View. Controls. Store. Help.) appear and disappear.
    ctrl S makes a side bar appear on the left side of iTunes. It shows the library which has Music. Movies. TV Shows. Apps. Playlists. Ect.
    When I did the steps you suggested, my iPhone did not show up in that list.
    I checked my firewall settings again, and they seem to be okay. My firewall is the only thing that I am not 100% sure of. If I go to Control Pannel>System and Security>Windows Firewall>Allow an app through Windows Firewall. It shows that iTunes is allowed. I'm not sure if something else might need to be allowed as well though. I have a few Remote options that are not allowed such as, Remote Event Log Management, Remote Scheduled Tasks Management, Remote Shutdown, Remote Volume Management, and Routing and Remote Access. I'm not sure if any of these need to be allowed or not, or if they are even affiliated with iTunes.

  • How to adjust the width of the accordion widget

    I'm builting my 2nd wesbite with Muse and cannot find a way to decrease the width size of the accoidion widget to fit my grid. When I try to decrease it it just "jumps" back to its original spot. 
    I may be going crazy but I can't seem to find any information on this in the forums. I'm sure it's a simple fix I just cannot find it. Any help would be appreciated!

    Reduce the width of the inner most container which is the usually the Text frame for each of the panels. Then you would be able to resize the width of the overall Accordion. Its just that the width of the Content Area cannot be less than that of the Text Frame inside.
    Thanks,
    Vinayak

  • How do you print an image keeping the height/width proportion in PSE9?

    was easy to do in older versions....
    looks like you now have to specify them  separately and they are not linked/proportions locked

    It does keep the image proportions.  In the "More Options" dialog box, I entered a value for the Height and hit "Enter".  Although the value for the Width and the blue rectangle show a proportion different from the original image, the image itself is scaled correctly:
    Ken

  • How do I change the width of the x-scrollbar for a waveform graph?

    I have a LV7.1 application that contains a waveform graph and must be usable on several PC with widely varying screen resolutions.  I have decided to position and scale the front panel objects programatically, including the graph itself.  The appearance of the graph is satisfactory on all screens, except for the x-scrollbar.  The width of the x-scrollbar does not change when I change the size of the graph.  I cannot figure out how to change the width of the scrollbar programatically to match the adjusted size of the graph.  Any suggestions?
    Regards,
    Chris

    Chris,
    I don't think that you can change the width of the x axis scroll bar programatically.  One thing you could do though is create your own scrollbar and change it's properties as your program runs.  I wrote a quick example of how you could do this and I've attached it to this thread.
    I hope this helps,
    Justin D.
    Applications Engineer
    National Instruments
    Attachments:
    ChangeXScrollbar.vi ‏116 KB

Maybe you are looking for