How do you allow an audio clip to keep playing after a video clip fades out at the end of an iMovie? I want the audio clip to fade out later... this used to be easy in an older version of iMovie.

I just updated to iMovie 11. I want the final music to play beyond the last video clip and fade out. How do I do this? Do I need to import a black screen?

Yes, I've done this, but I can't figure out how to get the audio to fade. I think I need to explain further. This is really a simple movie made from multiple photo stills from my son's school. There are cross fade transition betwee the stills, and some titiles that cross fade too. So there is not actual video. Thus everything shows only in the project library, where I dragged in the photo stills to import them. There is nothing in the event (or is in the clip) window in the bottom. I can't figure out how to get the volume lines to show for the audio clip in the project library as they did in the old version of iMovie so I could drag them up or down.

Similar Messages

Problems using projects created in older versions of iMovie

I have a few projects created in older versions of iMovie, as far back as version 2 as well as more recent versions. Most of those projects are finished and I want to burn them to DVD again, but a couple of them could bear a little touch up editing. These projects are precious movies of our kids and hard to replace. Although I could probably find the original video, I put many hours of work into creating these projects.
In any case, when I open up an old project, I get a warning that goes something like this: "The project was saved with an older version of iMovie. Opening it in this version will cause it to be upgraded, which will make it unreadable by older versions. Are you sure you want to open it?"
I clicked okay, thinking "sure, I don't need to play it in an older version. I have iMovie HD."
However, now when I play my old iMovie project, there are a few problems. For example, one original movie's title was over black. When I play the movie, I get a completely white screen and no title. Also, in another movie, when viewing the movie in full screen, the transitions were replaced by a black screen (although the transitions were there when I viewed the movie in the iMovie window). Basically, there are problems cropping up here and there.
I need to do some more experimenting with all this to more fully understand how many problems there are. I don't know if the projects I opened in iMovie HD are now "broken" since I "upgraded" them with iMovie HD (when prompted to save the project's changes when quitting, I said NO, don't save changes).
I don't know if I should use older versions of iMovie to view and burn to DVD these projects. (I still have iMovie 2 and 3, but not 4 or 5. I don't know if older versions would even work on my Quad G5 with OS 10.4.7.) I also don't know if the older versions of iMovie would work with the current version of iDVD. How can I tell which version of iMovie was originally used for a given project? How can I find iMovie 4 or 5 if I need it?
I also wonder if projects I make with iMovie HD can be opened by future versions of iMovie, or if I should export them as Quicktime or something to be safe.
As I start to look into this further, I would appreciate any comments, suggestions, and experiences that you may be able to offer. I need to get these movies back to their former selves, when they looked good!
Message was edited by: Anthony M Kassir MD

(when prompted to save the project's changes when
quitting, I said NO, don't save changes).
Excellent! That should leave you in pretty good shape. More below.
I don't know if I should use older versions of iMovie
to view and burn to DVD these projects. (I still have
iMovie 2 and 3, but not 4 or 5. I don't know if older
versions would even work on my Quad G5 with OS
10.4.7.)
The old versions of iMovie will run just fine in today's OSX. (But not iMovie 2 if it was the version that ran in Classic instead of Mac OSX.)
I run versions 2,3,4,5 and 6 today. Problems are minimal.
I also don't know if the older versions of
iMovie would work with the current version of iDVD.
That's not a problem unless your old iMovie projects contain chapters. If you tell iMovie 3 to create a new iDVD project, it might not work. You might not be able to transfer the chapter information to the newer version of iDVD.
(I just tested iMovie 3 to iDVD 6 and everything worked just fine.)
Except for iMovie 2, all old versions of iMovie stored a small QuickTime reference movie in the project folder. If you can't get an old version of iMovie to play nice with iDVD, drag that movie into the iDVD window.
How can I tell which version of iMovie was originally
used for a given project?
Drop the project file (discussed below) onto the TextEdit icon in the Dock. The version of iMovie that last saved the project is shown in the first few lines of the project file.
iMovie 5 used an entirely different project file format, the pList format. The top of the project file will look like this in TextEdit:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
How can I find iMovie 4 or
5 if I need it?
eBay?
I also wonder if projects I make with iMovie HD can
be opened by future versions of iMovie, or if I
should export them as Quicktime or something to be
safe.
We can never assume any new version of iMovie will be able to understand all features of a older project. It's always smart to make a backup.
There can be problems Apple can't anticipate. There may be third-party software used to create titles, transitions and special effects, plug-ins not installed with the new version or (more often, incompatible). The fonts installed on our Mac may have changed too. There's lots of features that can't be anticipated. I've never had a problem converting projects, but I never use third-party add-ons and special fonts.
As I start to look into this further, I would
appreciate any comments, suggestions, and experiences
that you may be able to offer. I need to get these
movies back to their former selves, when they looked
good!
My guess is it should be possible to restore the projects back to their original state.
Note that when imovie 5/6 converts an older project, it does NOT create a true iMovie HD project. Instead of creating an iMovie package, it retains the project FOLDER format. It places new iMovie HD elements inside the old project folder instead of converting it to a package.
When converting the project it changes the old project file name to "Sample Project Name.iMovie2Project", then creates a NEW project file with the plist format, having the name "Sample Project Name.iMovieProj". (There may NOT be the .iMovieProj extension.) When you save the new project, it adds a new project file "Sample Project Name.~iMovieProj". Note the tilde. The tilde file is a backup of the project file as it was when last saved in iMovie HD.
For our purposes, ignore the iMovie HD project files. We'll use the file ".iMovie2Project" to restore the project. (The extension is the same for all old versions of iMovie, not just iMovie 2.)
• In the Finder, Duplicate the entire project folder. Work on the copy.
• Open the project folder in the Finder.
• Discard the "Cache" folder, the "Shared Movies" folder, the "Audio Waveforms" folder and the two iMovie HD project files. (Some of those items may not yet exist yet because you didn't save the converted project.)
• Drop the "Sample Project Name.iMovie2Project" file onto the TextEdit icon in the Dock to get the version. Close it.
• Remove the ".iMovie2Project" extension, if you want.
• Launch that version of iMovie. Drop the "Sample Project Name.iMovie2Project" file icon on the iMovie icon in the Dock. With luck, the project should open normally. It's possible any third-party plug-ins used to create the project may not be available. If they aren't available, there might still be problems.
• Move your unconverted projects to folders that say which version of iMovie created them. To open them in the future, drop the project icon on the appropriate version of iMovie.
If all this fails, there is another way to do the editing you want. That is to import the project.mov file that's inside the converted project folder to a new iMovie HD project. That will deliver the video and audio of the original project as a single clip. Use that to re-edit the project. The name of the movie is "Sample Project Name.mov".
(The movie is a QuickTime reference movie, with no video and audio of its own, just pointers to the files in the Media folder. So long as the Media folder hasn't changed, it can play the original project as last saved.)
Importing the project.mov won't work with iMovie 2 projects, however, for iMovie 2 didn't store a project.mov file in the project folder.
Even if you end up importing the project.mov, you still may want to "unconvert" the project as described above.
Hope I haven't skipped a step. Let me know if you bump your head on something.
Karl

How do I open movies made with older versions of iMovie?

I have newer iMac with iMovie 10.0.02 and would like to open movies created with an older version of iMovie. I was informed by the people at the Apple Store this could be done. Does anyone know how? In the end I would like to create high def copies that can be viewed on a Mac laptop.

Hi
I was informed by the people at the Apple Store this could be done.
That depends up-on from what old iMovie version.
- iMovie 1 to HD6 - is one program and it's evolution - Will Not be possibly to open with any other program.
- iMovie'08 v.7 to iMovie'13 v.10.0.x - is a compleatly other product (wrongly named as iMovie in my opinion) - can open older files from this evolution. (Not from iM 1 - 6)
So it depends greatly from what version that You mean.
Please tell.
Yours Bengt W

I've just updated to iMovie '11....How do I add chapters like did in the older versions of iMovie?

I've just updated to iMovie '11....How do I add chapters like did in the older versions of iMovie?
And are there any other changes that may not be in iMovie '11?
thank you,
Paul Neathery

paulneathery wrote:
How do I add chapters like did in the older versions of iMovie?
Do you mean chapter markers?
http://support.apple.com/kb/PH2308?viewlocale=en_US&locale=en_US
Matt

I've created a movie but at the end there is an invisible audio clip that keeps playing. How can I select it and delete it?

Hello everyone,
This is Karie Garnier in British Columbia, Canada.
I'm new to FCPX.
I've created a 20 minute movie, but at the end of the movie, there is an invisible audio clip that keeps playing.
How can a video clip be playing and making sounds, when it doesn't appear in the timeline? and ...
How can I select this invisible audio clip and delete it?

I think you could be right, that it's an old render file that's got stuck.
By the time I finished this movie my 500 GB hard drive was 99.9% full and
FCP started acting wierd, so I suspect you are right.
I have since upgraded my hard drive to one 1000 GBs but when I play the movie the
glitch remains.
Can you please tell me:
a) How can I fix the old render file so that it is no longer stuck? ... and
b) How do I take a screen shot of the timeline?

HT4259 KB article is out of date--how do you "allow this network to be extended" on AirPort Utility 6.x?

The current KB article about extending wireless networks is out of date--how do you "allow this network to be extended" on AirPort Utility 6.x? These instructions describe v. 5.x.

In my case, the option was required, so the problem was that it wasn't available. When I used v6.2 to extend the network on the secondary AP Express, it gave an error saying the network couldn't be extended.
Once I booted Snow Leopard from an external drive, I was able to follow the instructions in HT4259 with v5. Once I checked the "allow this network to be extended" on the primary AP Express, the secondary AP Express started extending the network as it should.
While v5 of the AirPort Utility is available for download, it won't work on Mountain Lion, so this solution wouldn't work for most people, who don't keep old operating systems lying around.

How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs or whole CDs

How do I place tunes I have imported from CD into the appropriate playlists? I am running 10.9.5 on an iMac. I have 18,000 songs and 100+ playlists.It used to be easy on earlier iTunes versions. Now I can 't seem to be able to add songs ior whole CDs into existing playlists.

Hello there, susanmeehan.
The following Knowledge Base article offers up some great information on how to create a playlist with iTunes:
iTunes 11 for Windows: Create a playlist
http://support.apple.com/kb/PH12340
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Hi, I have an older version of imovie on my mac and I need to make a short movie right from the camera inside my mac because my flipshare camera doesn't have the correct software anymore. Do I definitely need the new version of imovie?

Hi, I have an older version of imovie and I need to record a short audition directly from my built in camera in imovie and edit it and then send it because my flipshare camera software isn't responding to mailing at all. Do I need the new imovie version download (update) available or can I simply use what is already on my computer to record edit and send?
Thanks!

AS an iLife 08 owner, you can get a free download of iMovie 6 here.
http://www.apple.com/support/imovie/
See bottom right of page for iMovie HD download.

IMovie HD saved project in older version of iMovie. Now can't open/find it

Working on an iMovie HD slideshow. Saved it although had a warning that older versions could not open it. Since I only have iMovie HD, I assumed no problem. Now I cannot open the file. Received WARNING
' The project “___” was saved with an older version of iMovie. Opening it in this version will cause it to be upgraded, which will make it unreadable by older versions. ' Seems like my project was moved to iMovie Trash.
Questions:
(1) Can I retreive my project? If yes, how?
(2) What happened to my IMovie HD and how do I get it back?
Appreciate your help.

Sorry I misunderstood about there being a conversion, Steve.
Let's back up a bit. There are some things here that sound very strange, including that the project contains no project file with a tilde in its name.
Were you ever able to save the project successfully? If so, iMovie should have created a tilde file as a backup to your project file "aaa.iMovieProj". If the tilde file doesn't exist, that suggests there's some underlying problem that's causing a failure to save the project to disk.
Let's set aside that project for a moment. Use iMovie to create a new project on the same disk. In the Finder, choose Show Package Contents. (There will be no tilde file in the package for the project hasn't yet been saved.)
Drag the file "aaa.iMovieProj" onto the TextEdit icon in the Dock. The first few lines should look like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
Is that what yours looks like?
Close the TextEdit window containing the project file. Back in iMovie, save the project. Now a tilde file should appear inside the package.
Did iMovie save okay? Did the tilde file appear?
Try adding images to this project, then save. Did it save okay?
Quit iMovie. Re-launch iMovie. Did the project open successfully?
The only possible cause that occurs to me is that the disk the project resides on isn't formatted correctly. iMovie requires the Mac OS Extended disk format. If you are storing the project on an external disk make sure the disk has the proper format. More about that here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
You might also try discarding the iMovie preference file "com.apple.iMovie.plist", located in the Username/Library/Preferences folder. Be sure to quit iMovie before trashing it.
Karl

Older versions of imovie

Hi,
would appreciate advice. I am currently running Leopard Mac OS X, 10.5.8, with imovie '08, 7.1.4.
Can anyone advise if it is possible to run an older version of imovie on my current set up? If so, where can I download a copy?
with best wishes
JF

Hi
Sorry that I didn't see this in time.
Installing iMovie HD 6 - will create problems with iLife'08 or 09
Way to do it is as Bev written here and in iM'09 forum several times.
a. Delete/Discard everything that has to do with iLife 08 or 09
b. Install iLife 6 and update iMovie to 6.0.3 (or 6.0.4 if You got this)
c. Now install iLife 08 or 09 and iMovie HD 6 will be left OK in folder "iMovie Previous version"
Please use the search function - and You wouldn't run into this mine.
Yours Bengt W

Will iPhoto 6 work with an older version of iMovie and iDVD?

Some time ago, I upgraded from iLife 4 to iLife 6 and iPhoto 6 works great, but when I try to use iMovie 6 or iDVD 6 they will not work, either because the processor speed is too slow or the OSX (10.3.9) is too old. Is it possible to use iPhoto 6 (I like the editing features) with the older versions of iMovie and iDVD from iLife04.
Thanks, Rick

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

Can I download an older version of imovie?

I have a early 2008 imac OSX yosemite 10.10.2. I want to use imovie but don't currently have it. Don't have the disk anymore either. I tried downloading the app but it's the 10. version of imovie which has been crashing. Is there a way to download the older version of imovie?

You can purchase iMovie HD 06 or iMovie 09 on Amazon as part of iLife.
IMovie HD 06 is by far my favorite version of iMovie. However, be prepared to pay about twice the price for this version, yes it's that good !
http://www.amazon.com/Apple-iLife-Mac-DVD-VERSION/dp/B0007LW22G/ref=sr_1_1?ie=UT F8&qid=1427568661&sr=8-1&keywords=ilife+06
The version of iDVD that comes with iLife 06 is perfectly fine. However iDVD 09 is the best. I know this is not an economical way to go but by purchasing iLife 06 and iLife 09, but you have a great movie creating system.

I created a spreadsheet on my mac with numbers, and now it tells me I have to buy a newer version of numbers to access the spreadsheet I created with the old program. if I wanted problems like that I would go back to using windows

I created a spreadsheet on my mac with numbers, and now it tells me I have to buy a newer version of numbers to access the spreadsheet I created with the old program. if I wanted problems like that I would go back to using windows

Hi sar23,
You may have inadvertently created or edited the document in the new Numbers 3.0 (which is free; you don't have to buy it) and are now trying to open it with the old Numbers 2.3.
Both versions can be on your Mac at the same time, and can run at the same time. The icons are similar so it's easy to confuse them (old on top here, new on bottom).
The new Numbers 3.0 is in your Applications folder. The old Numbers 2.3 should be in a subfolder in the Applications folder named iWork '09 or similar.
If you accidently edited an old document in the new version and want to take to take it back to the old version, you can export it:
SG

I need to download a older version of imovie

H there can anyone help me
i accidentally deleted my older version of imovie as was having problems with it
my macbook doesnt support the newest version so i need to download an older version

I have about a 3 year old MacBook
It's running Mac OS X on version 10.6.8
I am not overly concerned about which version of iMovie just one that I can load and use. I think it was version 9.0 but not 100%
Sorry I'm a little light on detail

I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

I recently installed older version of Imovie and final cut pro free trial now imovie 11 wont open what do I do?

Do you mean that the old version of iMovie (which version?) worked until you installed the FCP trial?
Note that you can only transfer projects from the latest version of iMovie (10) to FCP 10.1
Geoff.

How do you allow an audio clip to keep playing after a video clip fades out at the end of an iMovie? I want the audio clip to fade out later... this used to be easy in an older version of iMovie.

Similar Messages

Maybe you are looking for