How do you alphabetise a bulleted list

How do you alphabetise a bulletted list?

Donnie Ashworth wrote:
You have to first convert the list to a table (Format / Table / Convert List to Table)
Then select a cell in the table, open the table inspector, click on "Table", then go to the Edit Rows & Columns pop-up, and choose Sort Ascending or Descending, whichever you want.
If you want to then alter the table borders so it doesn't look like a table, you can do that also.
OR
You could then convert the Table to Text (Format > Table > Convert Table to Text)
Regards,
Barry

Similar Messages

How do you create a bulleted list in Illustrator CS6?

I want the bullet to remain with the text like it would in a MS Word bulleted list.
Thanks!

As mentioned Illustrator does not have a style of bulletted list. Thanks to some great typographical control you can create this using firs line indent (I set mine to -4.5 pt for this typeface & point size). This will give you hanging bullets, though if you change your type, that -4.5 would have to change.

HT201236 how do you make a bullet with keyboard shortcuts?

how do you make a bullet with keyboard shortcuts?

According to this https://discussions.apple.com/thread/1381905?start=0&tstart=0 Option 8 will insert a bullet.

How do you backup IPhone contact list to Computer (XP) PC Computer?

How do you backup IPhone Contact List to PC Computer(XP) ?

The easiest way that I have found is to open Outlook, go back to Itunes & select your phone.
Choose the 'Info' tab at the top of the screen & tick the box marked 'Sync contacts with' & choose Outlook from the drop down box.
Image attached may explain better.
Regards,

How do you clear the reading list in Safari

How do you clear the reading list in safari ?

Safari 6 / Mountain Lion
Section: Remove a page from the Reading List,
http://support.apple.com/kb/PH11942?viewlocale=en_US
Best.

How do you print the reminder list

How do you print the reminder list?

With Reminders open and your list you'd like to print select, press command "A". After that copy them (command "C"). After that, open your Text Edit app. Once that is open, paste your copy in there (command "V"). From here you can print like you normally do.

How to make an editable bulleted list with multiple lines and custom bullets?

How do I create an editable bulleted list in Acrobat Pro? I've figured out how to add text fields with multiple lines, and how to add a list box, but I don't see the check box for multiple lines in the list box or how to add bullet points. Can someone please give me step by step instructions? Also is it possible to use custom bullet points?

Is it a text field or a list box field? The two are not the same...
The bullets are something that the user will have to enter manually (into a text field, they can only select values in a list-box).
They can use any unicode character, or special characters if the font used for that field allows for it. You can't use images for the bullets, if that's what you mean.

How Do You Populate A Spark List Control With An Array?

Hello, all,
Sorry to come accross so frustrated, but how in the name of God do you populate a Spark list control with the data in an array? You used to be able to do this with the mx:List control, but the guys developing Flex just had to make things more difficult than they need to be! I am more of a code purist and prefer doing things the way they have been done for decades, but apparently nothing can ever stay simple!
I simply want to populate a list control with an array and this shouldn't be rocket science! I found out that I must use a "collection" element, so I decided that an arrayCollection would be best. However, after searching Adobe's documentation about arrayCollections, I am lost in a black hole of data binding, extra lines of code just to add a new element, the need to sort it, etc...!
Here is my code:
var pendingArray:ArrayCollection = new ArrayCollection();
for ( var i:int = 0 ; i < queue.length ; i++ )
     var item:UserQueueItem = queue[i] as UserQueueItem ;
     if ( item.status == UserQueueItem.STATUS_PENDING )
     pendingArray.addItem({label:item.descriptor.displayName,descriptor:item.descriptor});
Here is the relevant MXML:
<s:VGroup>
     <s:List id="knockingList" width="110" height="100"/>
</s:VGroup>
I'm not getting any errors, but the list is not populating.
I have seen several examples where the arrayCollection is declared and populated in MXML:
        <mx:ArrayCollection id="myAC">
            
            <fx:Array id="myArray">
                <fx:Object label="MI" data="Lansing"/>
                <fx:Object label="MO" data="Jefferson City"/>
                <fx:Object label="MA" data="Boston"/>
                etc...
           </fx:Array>
        </mx:ArrayCollection>
That may be fine for an example, but I think this is a rare situation. Most of the time I would image that the arrayCollection would be created and populated on the fly in ActionScript! How can I do this?
Thanks in advance for any help or advice anyone can give!
Matt

In your post it seemed like you were trying to take care of many considerations at once: optimization, design, architecture. I would suggest you get something up and running and then worry about everything else.
If I use data binding, then I will probably have to declare the arrayCollection as a global variable and then I'll have to write 100 or so extra lines of code to addItem(), removeItem(), sort(), etc... It just seems like too much overhead.
I believe you may have some misconceptions about databinding in general. You won't have to make it a global variable and you certainly won't need an extra 100 lines of code. If you did this forum would be a very , very quiet place.
I don't want to use data binding because the original array is refreshed often and there is one function called by an event that re-declares the arrayCollection each time, populates it with the array, and then sets it as the list's dataprovider.
That is the beauty of the ArrayCollection, it can handle the updates to its source Array. I don't know if you need to redeclare the ArrayCollection, resetting the source to the new Array allows everyone involved to keep their references so you don't have to worry about any "spooky" stuff going on.

How can I create a bulleted list where each line builds in independently?

I would like to make a bulleted list in my video where each bullet fades in as the person says them in the video (it is not at a constant rate). So far the only way I've accomplished this is to stack 6 or 7 of the 'Fade' title generators on top of eachother and adjust the length of them to match the audio. It seems like there must be a better way to do this as this solution is quite combersum when trying to align all the bullets (wish there was a bullet format in the text formatting box) and it uses a lot of computing power to make adjustments on so many generators. Thanks.

I am sure there is a way to do this in FCP or Motion. However, what I do is to build my bulleted list in Keynote against a green background. Set up the Keynote presentation as 1920x1080.
I then use it in FCP or iMovie as a greenscreen effect.
After creating the bullets in Keynote, I export them as a QuickTIme Movie with a timed advance. I then import the QuickTime movie and edit it as I need it.
Keynote has dozens of text effects and builds, including the fade that you need.
Here is a quick and dirty sample.

How do you disable the automatic list detection in Pages 5?

How can you disable or deselect the automatic list detection in Pages 5? I want to stop the auto numbering.

Menu > Pages > Preferences > General > Editing: uncheck Automatically detect lists
Peter

How do you determine StringBuffer and List capacity?

hi all,
I'm curious and would like to post this query that how to determine the StringBuffer and List capacity after read some of the Java Platform performance book. Some of this performance books simply tells number of capacity brieftly without telling what and how does the capacity stand for.
First, the book mentioned StringBuffer(50). Note, my question is that what is this 50 stand for? 50 Characters? or any. Can someone help me to rectify this?
Second, List. ArrayList(0.75). And what is this 0.75(by default) stand for? A heap space? Then how many of them? How many objects that can be stored for not to "exceed 0.75"?
Please help. :)
regards,
Elvis
scjp

I think the capacity is the CURRENT size of a container. But it is not equal to the number of elements that container currently hold. Just like, a house can have 10 people within, but problably only 3 people at some time. Also, the capacity is not equal to the maximum size, because container can grows automatically.
For example, a container whose capacity is 50, currently has 30 elements in it. If you add 10 elements more. That is only an addition operation. But if you add 30 elements to it. Then the container first enlarge its capacity according to some arithmetic(a enlarging rate), secondly carry out the addition operation.
Now that the capacity is the size, it should be a number standing for HOW MANY elements.... In the case of StringBuffer, it should be how many chars; in the case of ArrayList, it should be how many Objects. I do not think 0.75 can stand for a capacity. Prabaly, it was used to describe the enlarging rate when containers need to contain more elements than its current capacity. ( From JDK API, you can see the type of capacity is int ).
For containers and alike, the questions "how many I can hold" and "how many I am holding", "Do I can enlarge"? are helpful for understanding how it works.

How do you get the bookmarks list permanently displayed on the left side of the screen?

I somehow managed to get the bookmarks permanently open and displayed in a vertical column on the left side of the screen. I accidentally closed it and cannot get it to display again. How do you manage to get the bookmark list permanently open and displayed again? Thank you.

Hello exoticdoc2, see if the next [https://addons.mozilla.org/en-us/firefox/addon/all-in-one-sidebar/ All-in-One Sidebar add-on] it is useful for you, it is more than a sidebar bookmarks toolbar.
thank you

How do you make a patch list display the actual patches?

The Large Patch Display and the Selector controls show the current patch and a list of available patches respectively.
However, if I drop a "Compact Patch List" or a "Full Height Patch List" on the screen, it only displays "Set Name" and "Patch Name" values. How do you make it show the available patches?

Is it that you want to only see patches without sets, or that you more patches than are displaying in the list?
Either way, you can change both of these things in Layout. Select the patch selector object then in the Inspector on the left you have some display options.
Hope that helps!

SPD 2013 - Copy Document action - how do you update the copied list item's metadata?

SharePoint 2013 Designer no longer has the Copy List Item Action, it only has a Copy Document action. It seems that this action provides no way of saving the copied documents list item ID. How do you update the list item after it has been copied??
Any help is appreciated.
Greg Pierson

Hi,
According to your post, my understanding is that you wanted to copy the list item in SharePoint 2013.
The Copy List Item is
available only on the SharePoint 2010 Workflow platform, you can create a SharePoint 2010 workflow using the SharePoint 2010 workflow platform to achieve it.
You can also use the Content and Structure to copy the list items: Site Settings->Site Administration->Content and Structure.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How do you dynamically populate a list?

Hello! Can anybody tell me how to fill a drop down list or combo box dynamically? For example, I want to grab the unique values of a database (error_source), and populate a drop down list with those unique values. This way I won't have to constantly be updating the static entry list every time one changes.
Thanks for the help!

Hi Sara,
have you tried the dynamic entry list? If not open the properties of your drop-down-list select the entry list tab. Then choose dynamic another popup appears. In this popup you have to select your system (your database or another data source), then you can select table. Now choose output under the output port. Then you can assign for the output port a value (this is the key) and a text (the text is displayed in the drop down).
If you have any problems with the entry list then this following wiki entry can help:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/DynamicEntryListdoesnotwork">https://wiki.sdn.sap.com/wiki/display/VC/DynamicEntryListdoesnotwork</a>
Best Regards,
Marcel

How do you alphabetise a bulleted list

Similar Messages

Maybe you are looking for