How do you animate a title placed over video clip

I have been trying to animate a still title that I have placed over a video clip in expert view. There is only one line. I have followed the following which I think I got from the Adobe site:
Create a title with animated text
You can easily apply a preset animation to any still title. Text animation presets quickly and easily
animate the characters in your title so that they fade or pop characters into view, or fly in from the
top or bottom of the screen. For example, using the Fade In By Characters preset instantly makes
each separate character in your title fade into view until the title is complete.To preview an
animation, position the pointer on the Animation tab in the Adjust panel.
1. Do one of the following:
In the Quick view timeline, select the superimposed clip. In the Monitor panel, click the clip,
and then double-click the title text.
In the Expert view timeline, double-click the title clip.
The Adjust panel changes to display the text options.
2. In the Adjust panel, select an animation preset under the Animation tab.
3. Do one of the following to apply the preset to the title:
Click Apply.
Drag the preset to the Monitor window and drop it on top of the title text
I have had no success no matter what I've tried. I have a mac. I would value any suggestions.
Thanks.
barb

SG
Thanks. But let me clarifiy what I suspect Barb's issue is
a. not selecting the Text in the Text section of the Titler before applying the animation in Animation section of the Titler.
or
b. what I did not yet write, not using Default text since Text Animation does not work with Default crawl or roll
or
c. trying to use more than one line of text without the use of special procedures.
(I sort of put this thought aside when I replied since Barb wrote
I have been trying to animate a still title that I have placed over a video clip in expert view. There is only one line.
I interpreted that as only one line of text was typed in the Titler, not that there were two lines of text types.
But, the answer should be one of the 3. More details from Barb should help us to pin point the problem.
I think it was JohnnyO who first pointed out (your forum at few years back) that you can indeed apply Text Animations to more than one line of text in Premiere Elements Titler, but with the use of special maneuvers. I wrote about this and did a detailed step by step and overview on the matter.
ATR

Similar Messages

How do I add a title to a video clip w/ LiveType 2 and Final Cut Express 4

I have Final Cut Express 4 & LiveType 2.1.4, I'm not sure how to add titles or test to a video clip, and the tutorials for Final Cut Express 4 don't say how to get started in LiveType. How do I simply add text? The tutorials say how to add effects to the text they just don't say how to add it to the clip or how to get the clip into LiveType.

Well, you don't actually _add text_ to a video clip, you _create a text clip_ and add that clip to your timeline, either adjacent to an existing clip or on the next higher track if you want to layer the text with an existing video clip.
The very simplest way to add text is to use one of the *text generators* built into FCE. Lower Third, Text, Scrolling Text, etc. allow you to create various text clips and give you basic controls over fonts, positioning, size, color, etc. You can find the text generators in the Effects tab in the FCE Browser.
LiveType is a separate and more sophisticated application that enables you to do all sorts of things with text (much more than can be done with the FCE text generators). The basic process is - create your title in a LiveType project. Save the LiveType project. Then in FCE, import the LiveType project; from there, you can treat it just the same as any other clip.

How do you increase the size of a video clip in slide show?

Using Elements 7. Video clips can be run in full screen when from the Organizer, but when playing the slide show, they only display about 1/3 the size of the screen with a large black border around them.

Thought I'd try this just in case they are stripping out attachments.
Gary Grow
6457 Audubon Sq Dr N
Mobile, AL 36695
Email: [email protected]
Cell: (251) 422-8817
The American Creed by William Tyler Paige
I believe in the United States of America as a government of the people, by the people, for the people; whose just powers are derived from the consent of the governed, a democracy in a republic, a sovereign Nation of many sovereign States; a perfect union, one and inseparable; established upon those principles of freedom, equality, justice and humanity for which American patriots sacrificed their lives and fortunes. I therefore believe it is my duty to my country to love it, to support its Constitution, to obey its laws, to respect its flag, and to defend it against all enemies.

How do you make a title just fade away

I would like to put a still frame title into a clip, and instead of having it just be on the screen one second and a few seconds later instantly be gone, I would like to make the title slowly disapear into nothingness? Anyone know how to do that?

Yes, I'm very sorry. I keep forgetting that Encore and PPCS4 are separate programs. Yes, you do indeed create fading titles in PPCS4. I finally figured it out today. All that is necessary is to Put the new title on the timeline. Then place the timeline indicator bar, or whatever that thing is called, at the front of the title box on your timeline. Open up the effects control box, and expand the opacity box. Click the little diamond on the right side, and this will add a keyframe to the beginning of your title. Go to the end of the title box and click the diamond again to add a key frame to that end. Then just grab the keyframe on the right and pull it down. The title will disappear over the length of the time that it is on your screen.
Thank you Hunt. Also thank you for the advice about the book. I do appreciate it.
Terry Lee Martin
Date: Mon, 10 Aug 2009 20:36:49 -0600
From: [email protected]
To: [email protected]
Subject: How do you make a title just fade away
Terry,
I could be wrong, but isn't this something that one would do in PrPro?
Now, if one wanted a Menu (in Encore) to "fade away," they could create (in PrPro) a Button Transition to do that.
Good luck,
Hunt
>

How can you use one NetStream to publish video and audio from another NetStream in AS3?

Let's say one of your client programs in AS3 is able to receive live video and audio from a NetStream and play it on the screen. How could you make it also take that video/audio stream that it's receiving, copy it over into another NetStream, and publish it elsewhere? I need to know how to do with this regardless of whether RTMP, RTMFP, or some mixture is involved. The reason why the stream needs to be relayed this way is a real long story, but it's necessary in this particular case. Thanks!

RTMP is TCP, which has higher overhead and latency because it guarantees packets are delivered (handshaking, causing latency and overhead). It also doesn't allow you to share connections directly between clients forcing the server to do all the work.
RTMFP uses UDP, which is a choice protocol for streaming video because it's the opposite. It's lossy which decreases latency and overhead from no retransmissions and most importantly (in some applications) allows you to connect directly from one Flash Player to another Flash Player (p2p) so the server overhead is dramatically reduced. The server is only required to negotiate the initial connection and then it's up to the clients to continue to facilitate that.
How you code your one to many or many to many relationship broadcast network will be based entirely on which of those you choose.
URLStream is very common to use in p2p. Here's an older Adobe article on p2p and an alternate quick old video tutorial (FP10) as a quick simple example of p2p over RTMFP you can view the source of.

How do you make a slideshow with pictures & videos?

ok, i'm new to mac & video editing. i want to make a slideshow with pictures & @ the end of it, i want to put in a clip from a home video. if i put the home video on a DVD, will i be able to edit it? i know i have to edit the video in imovie but where do i go from there? can i import it into iphoto & make the slideshow there? if so, how do i save the imovie project as the right file type so i can import it into iphoto? if i can't make it in iphoto, what program do i use? i want the slideshow to be able to be viewed on a PC also.

Welcome to the Apple Discussions. As already mentioned you'll need to use a 3rd party slideshow application or iMovie.
However, you can create a slideshow in iDVD with stills and a video clip as iDVD 7 (08) now permits both stills and movie clips to be placed in a slideshow. This screenshot shows multiple video clips in an iDVD slideshow but you can also have stills and video clips.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

How do you add subtitles/text to a video?

How do you add subtitles/text to a video? Is it even possible? I'm working on a video with interviews and I want to write what they are saying underneath.

Take a look at the Ticker Tape title.
Also, you can use any Lower Third title. For subtitles, use the second line of the Title, or set the first line so that the Font size is the same as the second.

How do you add multiple effects to the same clip

How do you had multiple effects to the same clip. I have tried for hours
I would like to add sepia and aged movie to the same clip. I heard it can be done, but have not figured out how to do it.
anyone please.

Normally you can apply only one video effect at a time. But for Sepia, black and white, and others that can be done through the video Adjustments tab, you are in luck.
Aged Movie should already have a bit of a sepia tone.
If you want more of a sepia tone or you want to fine tune the sepia effect you can do it with the Clip Inspector/Video Adjustments tab.
Note: Thanks to Jeff Carlson of MacWorld for this tip.
If you're looking for a washed-out sepia appearance, first open iMovie's preferences and turn on the Show Advanced Tools option, which adds more controls to the Video Adjustments HUD and other areas of the program. Select the clip you want to alter and press the V key. Set Saturation to 0 percent, and then drag the Red Gain slider to 143 percent, the Green Gain slider to 90 percent, and the Blue Gain slider to 53 percent (feel free to tweak these settings to customize the results). Click on Done when you're finished. Note that the clip thumbnail still appears in color, as the video was shot, but the preview reflects your changes.--JC
If you need to apply the same settings to all clips, first select the clip you have adjusted. Then Edit/Copy. Then Edit/Select All. Then Edit/Paste Adjustments.

In iMovie, how do you modify the duration of all the clips at once?

In iMovie, using Mavericks O/S, how do you modify the duration of all the clips at once?

To set the duration of any clips to be added in the future select the project then "Settings" above the viewer. Adjust the slider to the right of "Clips" to the desired duration.
To change clips already in the timeline, select all of the ones you want to change (so they have a yellow border), click on "Adjust" then click the info button (i in a circle). You will see "Duration:" Set the time in seconds and press return.
Geoff.

How do you show only one caller's video display wi...

How do you show only one caller's video output with four people sharing a video call? i.e. the call originator wants to show a DVD video on a TV screen and the other callers want to view the video on full screen not just one fourth of their screen.

Thought I'd try this just in case they are stripping out attachments.
Gary Grow
6457 Audubon Sq Dr N
Mobile, AL 36695
Email: [email protected]
Cell: (251) 422-8817
The American Creed by William Tyler Paige
I believe in the United States of America as a government of the people, by the people, for the people; whose just powers are derived from the consent of the governed, a democracy in a republic, a sovereign Nation of many sovereign States; a perfect union, one and inseparable; established upon those principles of freedom, equality, justice and humanity for which American patriots sacrificed their lives and fortunes. I therefore believe it is my duty to my country to love it, to support its Constitution, to obey its laws, to respect its flag, and to defend it against all enemies.

Help how do you save a still frame of video as a photo?

Help how do you save a still frame of video as a photo? Thanks

A still frame from an Event:
Put cursor at the frame you want, then right click (or command click) and select "Add Still Frame to Project".
The still frame will be added at the end of the Project.
A still frame from a Project:
Put cursor at the frame you want then right-click (or control-click) and select "Add Freeze Frame". The Freeze frame will be added after the clip.
In both cases:
Select the still frame (so the yellow band is around it).
Right-click (or control-click) and select "Reveal in Finder".
You will see a JPG file highlighted in the finder.
Drag this file and drop it on your iPhoto icon in the Dock.

When i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

when i opn the you tube or any kind of video clip in the mozilla firefox the video clip is shaking completely how to solve a problem

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

How will you know if someone is using video chat?

How will you know if someone is using video chat? Does the green camera indicator turns red?

Hi,
You Buddy List will show two types of AV icons.
"Single" type which indicates the person can only do 1-1 Chats.
"Stacked" icons indicating they can do Multi-way chats.
Example pic
If they appear feint or "greyed out", so to speak, then they are Busy to someone else.
(if they are chatting with you they will appear dark again once connected)
9:01 PM Tuesday; November 15, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

How do I extend the end of a video clip?

Hi,
I have placed my video clip in my composition and at the end of it, I want to extend the last frame of that video all the way to the end. Just freeze the last frame. How do I do this?
I searched this forum using search terms like "extend" and "freeze video" but found no results.
Thanks,
JayGatz

By dragging the last keyframe, you are stretching the length of the entire clip (slowing it all down), which you probably don't want.
To just hold the last frame of a clip:
1) select clip
2) enable time remap (ctrl-alt-t)
3) goto outpoint (o)
4) set time remap keyframe
5) delete end keyframe (the one to the right)
6) drag layer endpoint to desired spot (you can also goto time where you want clip to end and hit alt ])
The reason you need to create a keyframe at the last frame is Time Remap places a keyframe after the last frame, on a blank frame. If you were to leave it like that, extend out the layer length, it'd be blank. By placing a keyframe on the last full frame, it holds that frame.
Hope it makes sense.
PS Not sure if you were aware, but you can use whatever keyframes you want with time remap. easy ease, hold, etc.

How do you animate a title placed over video clip

Similar Messages

Maybe you are looking for