How do you archive a disk with AirPort Utility version 6?

Has anyone figured how to Archive Disks with AirPort utility version 6? I can see both drives but it refuses to do an Archive in version 6? (I don't even see a button to do so in the UI?)

Please download and install AirPort Utility 5.6 for Mac OS X Lion
Keep both 6.0 and 5.6 on your Mac (6.0 cannot be deleted).

Similar Messages

How can you replace v.25 with an earlier version, say v.23 for my business purposes?

How can I install an earlier MAC Version of Firefox, e.g. 23 or earlier ? and then Uninstall the latest Version 25?
According to the Health Insurer I charge for services, Version 25 cannot work for them.

Best is to use the latest Firefox release for browsing on the internet and install an older version alongside that uses its own profile.
See this article about how to install multiple versions on Mac OS X:
* http://www.businessinsider.com/how-to-run-firefox-4-and-3-simultaneously-in-mac-os-x-with-multiple-firefox-profiles-2011-3
*https://support.mozilla.org/kb/Managing+profiles

Hi I am having problems with my old airport extreme base station. It is a 802.11g with airport utility version 5.5.3.

On a regular basis connection is lost by al of the apple products connected to it even though signal strength is still showing to be good and its green light is still on. The only way to resolve seems to disconnect it from the power and then reconnect. All the apple products connected to it are more up to date than the bsae stationis this the problem?

All the apple products connected to it are more up to date than the bsae stationis this the problem?
I think it may have more to do with the older AirPort Base Station failing than it has to do with the fact that you have newer Apple products.
One option is to perform a "factory default" reset on the Extreme, and then, reconfigure as required for your networking needs. If after this type of reset, the Extreme still acts up as you described, it may be faulty or about to fail.

How burn a boot-up disk with updated OSX 10.6.4?

Mac Book Pro was purchased with OSX 10.6 . The manufacturer’s disk that comes with Mac has OSX 10.6 too.
Later I did install some updates from Apple. Now it is version OSX 10.6.4.
The question :
How burn a boot-up disk with this updated OSX 10.6.4. which can be used for boot-ups instead of the manufacturer’s disk with the older 10.6 OSX.?

Thanks guys -I begin to get the picture...
Being a newbie I just need to ask you for some more info:
_Re “They kindly sent me an OEM 10.5.6 DVD (White DVD with Apple logo on it”_
My question: What is OEM dvd and can I make request for such a dvd over the internet?
Re “If you have a 16 GB flash drive you can install an emergency copy of OS X, _upgrade to your current version_, install some repair utilities, etc. and use it for an emergency boot disk.”
My question: I already have such an emergency copy on 16 Gb flash drive, so, how I upgrade it to my current version? Can it be done by getting on on internet and run software update as I did with OS installed on my Hard Drive?
Thanks in advance for your replies!

How to set up iHM79 speakers with airport express?

I've got the green light on the express.. i can see it fine in airport utility. I've told iTunes to play thru the express. But the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into teh express. I notice that in airport utility, it wants to know the name of the speakers. Well, near as i can tell, the speakers don't have a name, and there are very few directions that came with them, so i am lost.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?

William Boyd, Jr. wrote:
Jo Dorais wrote:
the express does not seem to realize it has speakers attached to it. All i did was plug the speakers into the express. I notice that in airport utility, it wants to know the name of the speakers.
You can use AirPort Utility (in the Music panel) to give the speakers a name. That can be useful if you have more than one set of speakers attached to separate AirPort Express units so that you can distinguish between them in iTunes.
I can't find a way to name the speakers.. it just asks me what the name of the speakers i want to use is.
How do i tell the express that it's got speakers attached so that i can play music thru them wirelessly?
Can you see the speakers in iTunes? One thing you may have forgotten to do is to check "Enable AirTunes" in that same Music panel of AirPort Utility.
I had that done, but it didn't matter. I could see the express in iTunes, but not the speakers specifically.
However, i have gotten it all to work by starting over. I ran across a tutorial here, telling me to plug the speakers into the express and THEN plugging the express into the wall, and then setting the express up with airport utility. So i restored it to default factory settings at that point and started from scratch. Voila! I still don't see names for the speakers, but they play music, so i'm not arguing.
Now I've left my daughter to figure out where to find the app for her iPod Touch to remotely control things.

How do you switch startup disks ?

How do you switch hard disks, one is full, the other is blank ?

If I understand your question correctly, there is really no need to switch startup disk.
You can just move the larger files, say music or photos from the system disk over to the disk drive that is blank now. OS X will then work with both disk drive at the same time. It will get the system and application data from the system disk drive and the music or photo data from the disk drive that is currently blank.
The only thing you will have to do is tell the application where you moved the data files to so that it can find them when it needs them.
Allan

How do you burn videos taken with myIphone and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I alos tried using Real Players file converter with no success!

How do you burn videos taken with my Iphone 4S and stored on my computer to a DVD disc. I purchased and tried using RealPlayer Plus 16 but got error message saying "unsopported media type"? I also tried using Real Players file converter with no success! Thanks in advance for any help you can give!

Probably the OP is no longer paying attention to this unless the OP is subscribed to this discussion. While not really an iPhone question I guess using an iPhone to produce the movie which then needs taking to the next step makes this as good a starting place as any unless you happen to know enough about what to do to determine in which forum to post. A suggestion in that direction would help.
Anyway, Apple is backing off from supporting optical media. It also depends upon what you mean by "DVD". A DVD is just an optical disc which can support different file formats, but many people think it means a movie disc you can put in your TV. Producing a movie disc requires special iDVD authoring software Apple used to sell but stopped several years ago. I don't know if the old versions work under newer systems. There's also the free Burn application which authors DVDs but takes a bit of learning and has nowhere near the features of iDVD.
If the OP means simply burning the transferred movie files to a DVD for archiving in computer format you don't need special software for that; its built into the operating system File > New Burn folder etc.

How do you manually manage podcasts with the new iTunes?

Like the subject line says: How do you manually manage podcasts with the new iTunes?
With the previous version of iTunes, when I plugged in my iPod, I could select the iPod, select podcasts, and manually delete episodes. With the new iTunes, I can't select individual episodes when looking at my iPod through iTunes. Is my only option to Sync? If so, why is that my only option?
This question probably has a simple answer, and I'm just not seeing it.

Rock,
I think I figured out a way to do what you want to do - which is the same way that I use Itunes with my Ipod. (My Itunes libary was destroyed last year so I can no longer auto synch my Ipod as I would lose thousands of songs).
Funnily enough, I discovered this new way of manually moving podcasts while trying to figure out what cpragman was trying to say (I never could - he must be smarter than me, as I couldn't get his method to work).
1. Open up your Itunes in your regular Library view. Choose Pocasts from the left hand side (either in the sidebar if you have that enabled, or from the little "radio" icon if you don't.)
2. Mouse to the podcast you want to place on your Ipod.
3. Right-click it. A long menu will pop up.
4. Move to the "Add to Playlist" option. As you hover, all your playlists will be visible. But at the very top will be the name of your Ipod itself (whatever you named it originally). Choose THAT name, and voila! That podcast will now copy to your Ipod and be easily available when you disconnect.
A nice feature of this method is that you can shift-click several podcasts at once and do the same thing, and all your selected podcasts will copy over (if you're like me and update your Ipod only every few weeks).
Hope this helps - let me know if it works for you!

How do you get a line with MULTIPLE fields to WRAP ?

How do you get a line with MULTIPLE fields to WRAP ?
Good afternoon everyone...
THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
A……………………… B
XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
But what if A is too long? I would want to see B wrap onto the next line like this:
A……………………………………………………B
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
YYYYYYYYYYYYY
And similarly….if B is extra long, can the line print as:
A………………………. B
XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
I don’t want the case where B is long and I get:
A………………… …B…
XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
………………………..YYYYYYYYYYYYYYYYYYYYY
I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
My SPECIFIC CASE
I have a report that I have stripped down to a simple structure for the purposes of this explanation.
My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
The LAYOUT MODEL has a group frame (the main , base one)
On top of this is a repeating frame based on the 1st group (family data).
On top of this is another repeating frame for the 2nd group (species data).
On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
All fields on the report line have variable horizontal elasticity.
The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
Can the line be made to WRAP????..
In my current report, 1 of 2 things is happening:
1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
But I would like a LONG line to continue printing onto the following line of the same page.
I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
I have been focussing my attention with this problem on the frames .
We are using REPORT BUILDER V 6.0.8.26.0
Thankyou to anyone who may offer assistance.
Tony Calabrese.

Steve,
you gain 1 thing, but you lose something else!
This thing is SO frustrating!
Hey Steve! Good afternoon.
I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
So it looks like:
&col1 &col2 &col3 &col4 &col5 etc etc etc
And the line expands nicely to each field's requirements.
And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
So I wanted something like (ignore the dots):
...................................ppppp
AAAA BBBB CCCCC DDDD EEEE FFFFFF
So the field of 'ppppp' appeared slightly higher on the line than the other fields...
I can't see how I can do this with a single TEXT field containing all the &COL values.
Have you ever come across anything like this?
Thankyou again,
Tony Calabrese 12/4/2007

How do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?

jen19 wrote:
how do you pay for apps with credit on your account from an itunes gift card that has already been redreemed and the credit id on the account?
Just buy something.

How do you structure a .book with an EDD?

Hi all,
I am learning how to convert legacy, unstructured FM documents into structured FM documents and need some help. So, I created a conversion table from my unstructured documents, created the EDD, applied the EDD to the unstructured document to create a structured document and now need to tweak the EDD.
My question is, what is the correct way to layout the EDD rules for a book using multiple document styles? For example: My book contains a title page, TOC, one or more chapters, a glossary of terms, and one or more appendixes (or is that a appendicies?.)
I am thinking the element rule would look something like this:
Element (Container): BOOK
Valid as the highest-level element.
General rule: TitlePage, TOC, Chapter+, Index, Appendix+
Followed of course by other elements required for the structure. However, I did see an EDD that I am sure was outlined like this (though I can't recall where:)
Element: TitlePage
Valid as the highest-level element.
General rule: Blah blah blah
Element: TOC
Valid as the highest-level element.
General rule: Blah blah blah
Element: Chapter
Valid as the highest-level element.
General rule: Blah blah blah
Element: Index
Valid as the highest-level element.
General rule: Blah blah blah
Element: Appendix
Valid as the highest-level element.
General rule: Blah blah blah
If the second structure is correct, how do you define the Book element? On the Adobe forum, I was told one EDD should be created for all book elements, which makes sense to me.
Okay people, fire away. Remember I am a neophyte in structured FM.
Thanks,
Adam

Thanks Van, that does clear it up for me... a little. My confusion now is, if I set all the book sections as valid at the highest level, then how does the book get structured as the starting point for the sections contained within it? I have tried to find a sample EDD detailing exactly this, but to no avail - my search brought up courses where this is covered, but not the actual EDD structure.
When I try to structure the book with the EDD, the book comes up red with its children elements looking just fine. Ahh! You have to love that learning curve.
Regards,
Date: Thu, 24 Sep 2009 06:43:41 -0600
From: [email protected]
To: [email protected]
Subject: How do you structure a .book with an EDD?
Adam,
Following up on some of Russ's sage advice, you asked:
If the second structure is correct, how
do you define the Book element? On the Adobe forum, I was told one EDD
should be created for all book elements, which makes sense to me.
As Russ said, your BOOK element looks fine. Not sure how far you have gotten, but when you open a document file that is in the book, its root element will be Chapter, TitlePage, Appendix, etc. That is why you have to declare each of these as being valid at the highest level. When you click in the book file window and look at the structure view, you will see that the BOOK element is the root element, and its content will be TitlePage, TOC, Chapter, Chapter,...etc. The book and all of its component files have the same EDD. The definitions for the BOOK element, as well as the TitlePage, TOC, Chapter, etc elements are all contained in the same EDD. I hope this helps to answer your question.
Van
>

HT204382 How do you read AVI sequences with Quick Time Player ?

How do you read AVI sequences with Quick Time Player ? H2OT

Hope somebody will help, I downloaded Flip4MacWMV 2.4.4.2dmg as recommended but it did not work. can I get HELP? Thanks

Please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in.

please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Connected to tv.how do you fill the screen with the ipad

Have connected to tv all ok but how do you fill the screen with the mirror image from the ipad

Yes I have the iPad cable bought from apple

How do you start a loop with an event and end the loop when u release ....

How do you start a loop with lets say an event of some sort, whether it be holding down a key or pressing the mouse click and then stopping the loop when you release that key or mouse button.?
double c = 1.8, i = 1, max = 90, exp = 0;
final double inc = 0.002; //speed at while it increases
boolean f = false, g = false;
while (true)
    while (f == false && stopMeter == false) //increasing speed going up to 90
        exp = Math.pow (c, i);
        i += inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp > max)
            f = true;
            g = false;
        } //end if
    } //end while
    while (g == false && stopMeter == false) //decreasing speed going down from 90
        exp = Math.pow (c, i);
        i -= inc;
        pAngle.setText (Math.round (exp) + "");
        if (exp < 1)
            g = true;
            f = false;
        } //end if
    } //end while
} //end whilethis is a snippet of my increasing increments. Its for an angle meter. I can't get it to stop, when the user clicks or does something... the program just gets stuck in an infinite loop. I am still new to java and i do not know how to fix this.

You are in the wrong forum. Try this one instead: http://forum.java.sun.com/forum.jspa?forumID=31
/M

How do you archive a disk with AirPort Utility version 6?

Similar Messages

Maybe you are looking for