How do you arm and mute tracks by keyboard?
Hi, I'm fairly new to audition as a recording tool (I'm used to Cubase instead) and I'm wondering if there's any way to arm or mute a selected track by keyboard in Audition CS6 in a multi-track project? I've looked at the manuals and custom shortcuts and can't find anything.
In CC or CS6? Are they using another term for it? I can't find it when I search for "arm" or "record" -- I'm using OSX (Mavericks), could that be it?
Similar Messages
-
Depending on whether track changes is on/paused, Pages thinks the pasted material is either all new and thus highlights it as a big track change or just copies the old material along with the edits as plain text so that I cannot see my track changes. I need to be able to copy and paste in the same document and still be able to see the older text along with the changes to certain sections thus far. Is this possible? I need a step-by-step "talk to me like I'm five" instructional if what I would like can be done.
Thanks for any help!
Message was edited by: C.M.W.What version of Pages?
What OS, iOS or OSX?
Are you sure you have the Table selected and not a cell or just contents?
Peter -
How can you copy and transfer tracks between songs in Garageband for iPad air 2?s
I have just started with GarageBand for iPad air 2 and want to know more about copying tracks between songs and also saving and using samples between songs too. Anybody have any good links or advice? Thanks
This has nothing to do with Classic, the operating system on Macs from 2001 and earlier. Please post in the forums most likely to have an answer if you want a quick one:
This guide should help:
http://discussions.apple.com/docs/DOC-2463 -
How do you add a stock tracker and weather to the notification center?
How do you add a stock tracker and weather to the notification center?
You can not. This is only a feature of iOS. It would only be supported via the dashboard on OS X
-
How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.
BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS -
How do you make one long track into multiple tracks?
How do you make one long track in itunes into multiple tracks? Is there a way to do that?
I found another solution too through Garageband. I don't know if it was easier, but I liked this way of creating seperate tracks.
First, You put the long track into Garageband.
-then you create a New Basic Track under Track Tab-create as many of those as tracks you want to make
-also make sure the headphones button is lit up under each New Basic Track-this allows it to be a 'solo' track.
-then you can start cutting music-with the long strip find where you want to split into a new track and drag that half down into each New Basic Track.
-Once you are done, press Option Z and a purple little triangle will appear up by the measures. drag the triangle to the end of the first track-this allows it when sharing to itunes to just record the particular track you want, it puts a stop/end to that track.
-then, make sure the track you want to share is highlighted the bright orange and go to share, 'send to itunes'
-it will send that to itunes and you can rename it in itunes.
-Go back to Garageband-delete the first track you successfully shared and move the next one up to where that one was. Slide it accross to the left so it is at the beginning, press option Z and move the purple triangle where you want it to be...and you are good to repeat until all your tracks are done!
I am a very visual person, and this helped to see where I was cutting each track, just another way! -
How do you select and move more than one bookmark at a time?
Shift+Click does not select multiple items that are next to one another in a list because the items open in firefox before this happens.Use the bookmarks library. You may use Shift +Click, and Ctrl + Click to create groupings of selected bookmarks to drag and drop.
* one method of opening the bookmarks library is keyboard shortcut <br /> Ctrl+Shift+B (Windows)
*see also [[How to use bookmarks to save and organize your favorite websites]]
*and [[Use bookmark folders to organize your bookmarks]] -
How do you add and remove links to websites in folders on Safari?
How do you add and remove links to websites in folders on Safari?
For clarification, works like a bookmark of website only it is listed in toolbar with "Most Visited", "Latest Headlines", "News", and "Popular". I have done it before but can't find it for the life of me.
Thanks! -
How do you Design and Develop?
How do you Design and Develop?
I know this varies based on alot of things such as knowledge, preference, purpose, resources, etc..but I am curious how different (level of expertise) designers actually prefer or implement their websites. I decided to do this post after two different forums discussions regarding 1.Templates and PHP and 2. Backend Development.
1. How do you generally approach a project?--Wireframe, Freehand (as it comes), PSD template, etc.--Do you have a specific 'methodology' or procedure?
2. What are 2-3 of your main resources / sites / applications etc that you use (and for what?)
Specifically: What do you use (and how) to get up a website? (I know again this depends on a variety of things, but in general..) *also if you would like to comment on your expertise or level maybe helpful.
Do you prefer (Pros/ Cons of:) What advice would you give regarding below?
Your own HTML/CSS/Script based site that you mostly (if not completley) built. (More control and original, but harder / tedious for beginner)
HTML Temlplate (tweak the HTML and CSS)--non framework type (Quick and easy, but usually poor quality, outdated?)--but some can servde as good starting point.
Wordpress (And others like Drupal, Joomla) (Somewhat quick and easy access to tweak a quality WP Theme with ability for alot of features--forms, search, databases, etc (otherwise might have trouble with advanced features w/o good working knowledge og PHP and MYSQL, maybe others?)--but kind of a 'workaround' for real HTML design?
Frameworks types like Foundation, Bootstrap, Skeleton
A combination or hybrid of methods? -- or another method I have overlooked?
Thanks very much for any insight you can offer, hopeully this will lead to a vibrant discussion.-The websites I build are 95% PHP/MySQL. They are heavy on business logic. I sometimes work with designers, SEO "experts" and (rarely) other coders. I almost never work on the content of websites. The clients do that themselves through the CMS I build for them.
I write every line of code myself except for the use of jQuery and a few PHP code classes adapted from others. I can build a complex website in a matter of minutes by reusing the code libraries and patterns I have developed from previous projects.
I don't use a PHP framework because I have developed my own "pseudo-framework" for the particular kinds of sites I build, but I respect the frameworks that are out there. They can teach you excellent coding habits.
In starting the design and logic of a site, the most essential question is: What is the website (or website project) supposed to accomplish? My clients tell me what they want to accomplish, but I usually decide how to get there. This holds for both business logic and design, because design also must serve the business objectives.
My website projects generally take four months to two years to complete. The client usually dedicates one employee to work as a liaison between me and the rest of the company. Because the sites I build are heavy on the business logic, a great deal of time is spent on testing and debugging. I make testing the responsibility of the client so I can't be held liable if, for instance, a terrible accounting mistake is discovered in the code logic.
I like to use Adobe Illustrator for design development because I became an Adobe Illustrator ACE in 2000; however, I can see that Fireworks is probably the better tool. Photoshop is an important secondary tool.
For general site management and code writing I use both Dreamweaver and ZEND Studio; however, I use Dreamweaver less and less.
I now require all my clients to have their websites (and also domain name registrations, since my company is a domain name reseller) hosted on my VPS server. This prevents anyone from stealing code I have worked for years to develop and also establishes a commitment between myself and the client. When you are starting a web development business, you can't demand this kind of commitment from the client. Even a lot of great seasoned developers can't. It depends on your reputation within the specific industry(ies) you service. -
if you've changed your startup options on mac to start in windows, how do you fix and go back to mac. I can't get my mac to switch back to mac, it is like stuck in widows mode, I have tried holding down the options key upon start up and that did not fix it either.
Please help! Thank you so much!The Apple drivers you install in Windows also puts a Startup Drive icon in the Task Bar. Choose that to change the startup disk back OS X.
-
Re: How do you create and use "common" type classes?
Hi,
You have 2 potential solutions in your case :
1- Sub-class TextNullable class of Framework and add your methods in the
sub-class.
This is the way Domain class work. Only Nullable classes are sub-classable.
This is usefull for Data Dictionary.
The code will be located in any partition that uses or references the supplier
plan.
2- Put your add on code on a specific class and instanciate it in your user
classes (client or server).
You could also use interface for a better conception if needed. The code will
also be in any partition that uses or references the supplier plan where your
add on class is located.
If you don't want that code to be on each partition, you could use libraries :
configure as library the utility plan where is your add-on class.
You can find an example of the second case (using a QuickSort class,
GenericArray add-on) with the "QuickSort & List" sample on my personal site
http://perso.club-internet.fr/dnguyen/
Hope this helps,
Daniel Nguyen
Freelance Forte Consultant
http://perso.club-internet.fr/dnguyen/
Robinson, Richard a écrit:
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>-
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>Hi Richard,
Your question about "utility classes" brings up a number of issues, all of
which are important to long-term success with Forte.
There is no such thing as a static method (method that is associated with a
class but without an implicit object reference - this/self/me "pointer") in
TOOL, nor is there such thing as a global method (method not associated
with a class at all). This is in contrast to C++, which has both, and
Java, which has static methods, but not global classes. Frequently, Forte
developers will write code like this:
result, num : double;
// get initial value for num....
tmpDoubleData : DoubleData = new;
tmpDoubleData.DoubleValue = num;
result = tmpDoubleData.Sqrt().DoubleValue;
tmpDoubleData = NIL; // send a hint to the garbage collector
in places where a C++ programmer would write:
double result, num;
// get initial value for num....
result = Math::Sqrt(num);
or a Java programmer would write:
double result, num;
// get initial value for num....
result = Math.sqrt(num);
The result of this is that you end up allocating an extra object now and
then. In practice, this is not a big deal memory-wise. If you have a
server that is getting a lot of hits, or if you are doing some intense
processing, then you could pre-allocate and reuse the data object. Note
that optimization has its own issues, so you should start by allocating
only when you need the object.
If you are looking for a StringUtil class, then you will want to use an
instance of TextData or TextNullable. If you are looking to add methods,
you could subclass from TextNullable, and add methods. Note that you will
still have to instantiate an object and call methods on that object.
The next issue you raise is where the object resides. As long as you do
not have an anchored object, you will always have a copy of an object on a
partition. If you do not pass the object in a call to another partition,
the object never leaves. If you pass the object to another partition, then
the other partition will have its own copy of the object. This means that
the client and the server will have their own copies, which is the effect
you are looking for.
Some developers new to Forte will try to get around the lack of global
methods in TOOL by creating a user-visible service object and then calling
methods on it. If you have a general utility, like string handling, this
is a bad idea, since a service object can reside only on a single
partition.
Summary:
* You may find everything you want in TextData.
* Unless you anchor the object, the instance will reside where you
intuitively expect it.
* To patch over the lack of static methods in TOOL, simply allocate an
instance when required.
Feel free to email me if you have more questions on this.
At the bottom of each message that goes through the mailing list server,
the address for the list archive is printed:
http://pinehurst.sageit.com/listarchive/.
Good Luck,
CSB
-----Original Message-----
From: Robinson, Richard
Sent: Tuesday, March 02, 1999 5:44 PM
To: '[email protected]'
Subject: How do you create and use "common" type classes?
I'm relatively new to forte and I'd like to know how can you handle utility
type classes that you want to use through out your application? Ideally
what I want is a static class with static methods.
Let's say that I have a StringUtil class that has a bunch of methods for
manipulating strings.
My problem is that we have code that runs on the client and code that runs
on the server. Both areas could use the StringUtil class, but from what I
understand, I have to create StringUtil in a plan and then create a server
object of type StringUtil. The server object will eventually get assigned
to a partition. That's not good since I really want the server object to
physically reside at the server end and at the client end. (Actually, I
don't want a server object, I just want to invoke a static method of a
static class).
Any clues on how to solve this problem would be appreciated.
Also, what is the url at Sage-it that has a summary of all emails that have
been posted to [email protected]? Perhaps this question has been
answered previously.
Thanks in advance -
How do you drag and drop using mac laptop?
how do you drag and drop using mac laptop?
As said above, you can click down, ons use the other finger to drag the object. I had turned on the setting to use three-finger drag, so you can drag objects with three fingers. To change gesture settings, go to the system preferences>trackpad. Here you can also see all of the gestures of Mac OS X.
-
How do you copy and paste text from a website to a Pages document please. I could do this from my old ipad but not from ipad air. Thank you
Welcome to the Apple Community.
Why what happens when you try. -
How Do You Copy and Paste in iPhoto
How do you copy and paste in iphoto.
When I highlight a picture and duplicated it I click on the duplicate picture and drag it into my other event however it takes the original and the duplicate pictures into the new event and I lose the pictures from the original event. All I want is the same picture in separate events. This is really frustrating me can somebody please help me with this.At this time, to the best of my knowledge you can't. Use QuickTime 7 Player which should be in your Utilities folder (if not, it can be installed using the Optional Installs on your Snow Leopard install disk).
-
How do you pan and/zoom an image--the "Ken Burns" effect?
How do you pan and/zoom an image--the "Ken Burns" effect?
Frequently answered question
Cheers
Eddie
Forum FAQ
Premiere Pro Wiki
- Over 250 frequently answered questions
- Over 100 free tutorials
- Maintained by editors like
you
Maybe you are looking for
-
This question was posted in response to the following article: http://help.adobe.com/en_US/lightroom/using/WS2bacbdf8d487e582-4e663b4513220e78a1e-8000.ht ml
-
It was a dark and stormy night... For the past eight years, I had been happy with Verizon wireless service. Great coverage and rarely a dropped call. However, all of that changed when I moved into a lovely mid-century modern condominium. The solid co
-
"itunes has encountered a problem and needs to close" message appears
Every time I try to open itunes a Windows message comes up saying "itunes has encountered a problem and needs to close." I tried uninstalling and downloading it again, but nothing is working. What do I do?? Windows XP
-
Windows 7: Unable to print pdf documents with Reader 9.3.0
I have the following problem. Right now we are on the way to deploy Windows 7 in our environment. Now i have come over a problem with Adobe Reader 9.3.0, Windows 7 and our older printer modells from HP (4000er and 4050er). With them I can't print out
-
Which all folders tend to increase in thier size under USR/SAP ?
Hi, We have installed EP 7.0 on HP UX in our landscape. We have deployed the XSS components and ESS/MSS/SRM/CRM business packages on to our portal. After which we have identified an increase of 3 GB in our usr/sap folder. Pls. let me know i