How do you assign an InDesign server instance to its own drive?

I am working on optimizing the performance of our InDesign server and read about the possibility of assigning drives to the individual instances in the performance guide. Is there a configuration file or command-line argument for configuring the working drive for each server instance?

I am not sure about that. Do you mean that all I have to do is provide the interface <cc:attribute name="value" type="lvl1.lvl2.someClass"/> and when I run the method, the returned result will be written into the expression provided in "value"?

Similar Messages

How do you upgrade OS X server 4.0 to another drive after installing on primary drive

I've upgraded OS X Server to version 4.0 after installing the Yosemite OS X. As usual, the server does not work properly after the upgrade. I've installed Yosemite on another boot drive to rebuild the system. I'm trying to upgrade the new install of Yosemite to the Server 4.0 version but when clicking the upgrade button, it just sits there with the wheel spinning. Has anyone seen this and how can I get the copy downloaded again to install version 4.0 of OS X Server?

I appreciate both of your prompt replies. According to the following support page (http://docs.info.apple.com/article.html?artnum=107037), I only needed OS X 10.1 or later (more specifically, it says that 10.0.X or earlier cannot be upgraded without erasing). This page was directly referenced by this page (http://docs.info.apple.com/article.html?artnum=301270) which is on the very post that Ferd referenced ("10.4 Tiger Upgrade: Decision tree+Checklist" at http://discussions.apple.com/thread.jspa?threadID=121773). I can find nothing on official Apple websites that says anything about needing OS X 10.2 to upgrade to 10.4. The bottom line is that most of my harddrive is consumed with my music (approx 15 MB) and there is no convenient way for me to back it up or move it without buying an external hard drive. It just seems absurd to me that in order to use my new $300 iPod that I need to both invest $120 in new software and then another $100-200+ in an external hard drive so that said new software can be installed over my existing data. It's really bad enough that Apple gives you no charger and no case for the iPod, charges you for new software versions, and then makes their new software so incompatible that you have to erase your hard drive just to install it. Exactly why do people love their Macs over their PCs? If I have to buy an external hard drive, why shouldn't I simply take all my data off of my iBook and be done with Macs forever?

How to get InDesign Server instance on IIS Webservice

    <WebMethod()> _
    Public Function testIDS() As String
        Dim idsAP As InDesignServer.Application = Nothing
        Try
            idsAP = GetObject("myid2")
        Catch ex As Exception
            Return ex.Message
        End Try
        idsAP.Consoleout(" Web Service call test success !(VB) ")
        Return Nothing
    End Function
I can run it correctly on ASP.NET development server, but it will occurred error on IIS6 .
Is the permission problem? How to solve it ?
I also try this
idsAP = System.Runtime.InteropServices.Marshal.BindToMoniker("myid2")
But, no use !

SQL Server instances define the container for all operations you perform within SQL Server. Each instance
contains its own set of database, security credentials, configuration settings, Windows services and other SQL Server objects.
SQL Server 2008 supports the installation of up to 50 instances on SQL Server on a single machine. When connecting to a named instance, you use the combination of the
machine name and instance name, such as <machinename>\<instancename>
Please refer to:
http://msmvps.com/blogs/paulomorgado/archive/2010/07/02/how-to-add-and-remove-sql-server-2008-2008r2-instances.aspx
http://www.sysads.co.uk/2012/02/add-additonal-sql-instance-to-existing-sql-server-2008-r2-cluster/
Please vote if it's helpful and mark it as an answer!

How do you assign a user or group FULL access to all Exchange 2013 DAG mailbox databases?

How do you assign a group or user FULL mailbox access rights to ALL mailboxes in the Organization or DAG mailbox databases?
Commands I've tried with no avail:
get-mailboxdatabase -server “exch01″ | add-adpermission -user “domain admins” -AccessRights GenericAll
get-mailboxdatabase -identity "DAG database" | add-adpermission -user "user" -accessrights FullAccess
Please let me know if you can help! Thanks.

Get-Mailbox | Add-MailboxPermission -Identity UserMailbox -User "Domain\Group" -AccessRights FullAccess - worked for me! Thanks again!

How get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?

Hi,
I have a RVS4000 router with DHCP enabled and in router mode.
The LAN is 192.168.2.x. The RVS4000 static IP address is 192.168.2.8
The router is not the RVS4000 and is at 192.168.2.1
The RVS4000 dhcp is assigning it's clients a default gateway of 192.168.2.8 instead of what I want 192.168.2.1.
How can I get the RVS4000's DHCP server to assign another IP address other than its own as the default gateway to its DHCP clients?
Thanks

Hi Gail, you cannot do this. The router, as the DHCP server will only assign a default gateway of what IP interface the DHCP server runs on. If you have the default IP, the gateway is 192.168.1.1. If you create a second vlan, by default it would be 192.168.2.1.
There are not configuration options for the built-in DHCP server. If you'd like to expand this functionality, you would need an external dhcp server.
-Tom
Please mark answered for helpful posts

HT2486 How do you assign a new contact to an account other than default account?

I have multiple mail accounts (iCloud, exchange server, gmail) each with their own contacts. When adding a contact how do you assign it to the right account? I know you can assign a default account under settings but how can you assign it to an account other than the default?

Apple allows you a deauthorize all option once every 12 months.
iTunes Store: Authorize or deauthorize your Mac or PC
Deauthorize all computers
After you authorize two computers, you'll have the option to deauthorize all computers for your Apple ID. You can deauthorize all computers once a year.
Just like deauthorizing a single computer, you won’t delete anything if you choose to deauthorize all computers. You just won’t be able to play content that you bought from iTunes on those computers. After you deauthorize all, you can easily authorize computers again one by one. Just follow the steps to authorize a Mac or PC.
Here's when you should deauthorize all your computers:
If a computer doesn't work anymore
If you don't have one of your computers
If you used 5 authorizations and want to authorize a new computer
To deauthorize all your computers, follow these steps using one of your authorized computers:
1.Click to open your account in iTunes (you may need to sign in with your Apple ID), or follow these steps:
     a. Open iTunes and click iTunes Store.
     b. Click Sign In and enter your Apple ID.
     b. Click your Apple ID and select Account.
2. Click Deauthorize All.
The Deauthorize All button appears only if you have more than two authorized computers.

How do you assign program changes to external controllers in mainstage 1

i would like to use 6 specific buttons on my controller to toggle between patches
i know how to scroll through patches using my controller by assinging the next and previous patch functions to 2 buttons on my controller
however what i want is to just be able to push button 1 and go to my gladiator AU synth, then push button 3 to go to my sylenth AU synth. basically i want to be able to change in real time on the spot, spontaniously without premeditation or having scroll between multiple patches to get to the one i want to use.
in the previous posts it says
on the patch list select the instument
in the patch inspector go to attributes
select program change, then assign it a number
then assign a midi controller button to trigger that program change number
i can do everything except the last part
how do you assign a program change to a controller button? i cant see anywhere how to do this,
i am using mainstage 1.0.2 thank you so much for any support you can give me

I am not sure about that. Do you mean that all I have to do is provide the interface <cc:attribute name="value" type="lvl1.lvl2.someClass"/> and when I run the method, the returned result will be written into the expression provided in "value"?

How do you save an InDesign CC doc down to InDesign 6 so that you can open it in 6?

How do you save an InDesign CC doc down to InDesign 6 so that you can open it in 6?

Export/Save As .idml, and don't expect a perfect translation.

How do you completely erase Apple Server as if it never existed?

How do you completely erase Apple Server as if it never existed? I keep having issues with my Apple server so I want to erase it as if it never existed. I have tried doing "sudo rm /var/db/.ServerSetupDone" but it still saves settings from before. I just want it to install as if it never has been set up before on my iMac.
Thank You

Move the Server application to the Trash. Delete the following items (some may not exist):
/.ServerBackups
/var/db/.ServerSetupDone
/Library/Preferences/com.apple.serverd.plist
/Library/Preferences/com.apple.servermgr_accounts.plist
/Library/Preferences/com.apple.servermgr_certs.plist
/Library/Preferences/com.apple.servermgr_info.plist
/Library/Preferences/com.apple.servermgrd.plist
/Library/PrivilegedHelperTools/com.apple.serverd
/Library/Server

How do you assign charStyles with proper fillCollor settings

How do you assign charStyles with proper fillCollor settings

Have a look at these Links...
http://cnettv.cnet.com/free-custom-ringtones-text-tones-ios-5/9742-1_53-50113469 .html
http://cnettv.cnet.com/create-free-ringtones-itunes-10/9742-1_53-50093086.html

How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver? I have been trying with no such luck.
   I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth. But for now, I would just like 2 computers to talk and then eventually talk to our own device.
One is a desktop w/ the Belkin F8T012 USB adapter. It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash. It says it cannot install it because it cannot find the necessary hardware. I thought this USB adapter was on the approved Bluetooth devices list? What else should I try? Another Bluetooth USB adapter?
The other computer is a Dell Latitude 820. It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module. On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter). It came with a serial port interface which we modifed to go through a bluetooth interface. It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port. But we would like to use the Bluetooth VIs in LabVIEW. I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well. Do I just uninstall the driver and then try to have Windows install its own driver? Do you have any other recommendations?
Thanks,
Javi

Hi Javi,
This sounds like an issue with Windows and your specific Bluetooth devices. As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers. Take a look at this link for specific requirements for using Bluetooth with LabVIEW. Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here. Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver. You could check out the Microsoft Knowledgebase for more information. Thanks and have a great day!
Stephen S.
National Instruments
1 Test is worth 1000 expert opinions

How do you import photos from a library on an external drive to the current library running in iPhoto?

How do you import photos from a library on an external drive to the current library running in iPhoto? I have a few different pictures in each library and would like to have all my pictures in both libraries. The library on the external drive is my backup. I would appreciate any help.

Depends on exactly what you want to do.
Just move some of the Photos? FIle -> Export from one and export the shots to the Finder. Then import them to the other.
This User Tip
https://discussions.apple.com/docs/DOC-4921
has details of the options in the Export dialogue.
Move the photos and all versions and metadata: use iPhoto Library Manager it's the only way to do this while preserving everything. Merge two Libraries into one?
If you have Aperture 3.3 or later and iPhoto 9.3 or later you can merge libraries with Aperture.
Otherwise the only way to merge Libraries is with the paid ($20) version of iPhoto Library Manager

How do you know what version Mac OSX is on ANOTHER drive?

How do you know what version Mac OSX is on ANOTHER drive without starting that drive
and seeing the system profiler? In fact, because the drive wont start up, Now I am wondering if it is pre-intel. ? CMD-I doesn't do it. Thanks

Why mess with this? Well, I got the HDDs and the enclosure from my previous PPC, so I'd like to make use of it all without $pending again.
I don't see any problems with using the card and drives on your new Mac. Hardware is too pricey to just leave behind if you can't help it. With the new drivers I suspect you'll be able to use your drives, I just don't think you'll be able to boot from them if the interface card requires drivers. They should still be very fast storage devices, and probably reliable due to the ongoing support the vendor has provided.
I went through the same type of issue when I bought my Dual G4 1.42 Tower (upgraded from a Quadra 840AV ). Several of my devices were SCSI (I was into SCSI Wide/Fast drive arrays at the time for video capture), and I was able to use an Adaptec card for scanning for several years with Jaguar and Panther. I'd spent quite a bit of cash to ensure high quality and performance and didn't want to loose all of the investment. Eventually the SATA hard drives and other USB and Firewire replacements became so cheap and performance improved enough that loosing SCSI with Tiger was not a big deal. I do think I should get about 5 years of hardware compatibility with most products and I keep older Mac's around for dedicated services as long as they aren't a costly maintenance issue.

How do you display the capacity/free space for the hard drive......

How do you display the capacity/free space for the hard drive on the desktop, under the hard drive icon.... I have seen this done, but I am not seeing any options to do so.... thanks.

View, Show View Options…, Show item info checkbox.

How can you back up files that are on an external drive?

How can you back up files that are on an external drive?

hw999 wrote:
How can you back up files that are on an external drive?
Easy way, CLONE IT to another HD
HD cloning software options:
1. SuperDuper HD cloning software APP (free)
2. Carbon Copy Cloner APP (will copy the recovery partition as well)
3. Disk utility HD bootable clone.
Methodology to protect your data. Backups vs. Archives. Long-term data protection
https://discussions.apple.com/docs/DOC-6031
hw999 wrote:But all I want to do is include the data that I store on an (second) external drive (internal drive getting too full) part of the auto back up process using timemachine.
BAD IDEA
You want one backup (ie Time machine) and one (or more) data archive of just all your raw files (drag and drop, or cloned etc.)

How do you assign an InDesign server instance to its own drive?

Similar Messages

Maybe you are looking for