How do you automatically maximize the active video when it changes...

Hey guys,
I'm looking for a way to automatically maximize the next video in queue when viewing videos online. The specific example I am looking for is here: NHL.com
As you'll see, when the next video in line plays the screen minimizes to regular size. Note that I have an ad-remover so that ad doesn't come up... I'm looking for a way to automatically maximize the video screen when the next video plays (and thus minimizes).
Macros would work but it would be hard to time it and to make it work across a large spectrum of sites. I'm looking for something that more or less detects video applets (automatically or through inputted settings) and automatically full screens it when available...
Thanks!

So we can design robots that can guide weapons launched from thousands of miles away into a specific window of our choosing, but no one has designed a solution for this?
REALLY?!?!1
xD :P

Similar Messages

How do you upgarde to the ios 5 when you dont konw your adminitratror name and password

how do you upgrade to the iOS 5 when you don't know your administrator name and password

Ask the person who administers the computer/network.
Just what was the error message and when did yu get it?

How do I set up my apple laptop to automatically show the active screen when attaching a HDMI cable to my TV

When using HDMI cable to TV how do I set up to automatically display the active laptop screen so that I don't have to drag to TV

You have the display set in Extended Desktop mode with the MacBook as the main screen. The Menu Bar and Dock will be on the MacBook display and your background screen on the TV but you can move the cursor onto the TV screen.
In System Preferences>Display on the MacBook screen there should be an Arrangement tab when you have the MacBook hooked up to the TV and both screens working. When you click the Arrangement tab do you see two monitors side by side? One of them will have a Menu Bar at the top. Just click on the Menu Bar and drag it to the second monitor. That will make the second monitor your main screen.
The TV will now have the Dock and Menu Bar and windows will open on it. But you can move the cursor to the MacBook screen and move windows from the TV over to the MacBook screen.
You can now use your MacBook in Clamshell Mode with a wired or Bluetooth keyboard and mouse. http://support.apple.com/kb/HT3131 When you disconnect from the TV your Menu Bar will automatically change back to the MacBook.
Or if you want to work on the MacBook screen while showing it on a TV you can check the Mirror Display box on the lower left hand side of the Arrangement tab under the two monitors box. That will give you the same screen at the same resolution on both the MacBook and the external monitor.

How do you get to the firefox feature when you made page the entire screen

I was on a firefox page and mad the page full screen. Now I cannot get to the firefox setting in the upper left corner of the screen to print, page setup, etc. How do I restore the firefox on the screen

If you are in full screen mode then hover the mouse to the top to make the Navigation Toolbar and Tab bar appear.<br />
You can click the Maximize button at the top right to leave full screen mode or right click empty space on a toolbar and use "Exit Full Screen Mode" or press F11.
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily if the Menu Bar is hidden.

How can I make Reader the active window when opening documents?

I am having trouble with this because right now documents open in the background and Adobe Reader does not become the active window. This requires an extra click on Adobe to bring the opened document to the foreground.
Nowhere to be found in Preferences.
My system is Linux RedHat 2.16.0
Adobe Reader 9.3.1
Thanks a bunch.

Sir,
Inspect the following methods (all available to, say, a JFrame) - they might help you out:
setVisible
setState (to (de)iconify)
toFront (request to bring to front)
requestFocus

Folder navigation. How do you navigate up the file directory when you didnt navigate down?

If i search a file in finder and then i want to see what folder and go to that folder how do you do that? In windows you can click the drop down button that shows the entire directory path but there doesnt seem to be any similar function in the finder window. You can click the back button to go back up the tree if you got there by navigating down but if you went directly to the file form a search there doesnt seem to be any way to go up the path.

To add to CT...
or... using the path bar.

How do you return to the current menu when playing dvd?

Hello everyone,
I am authoring a dvd that has 3 submenus with several chapters in each. How do I set it up so that if I am watching a chapter in submenu 3, I will return to it if I end it or hit "menu". Right now it keeps defaulting back to the main menu, and I have to navigate to the 2nd or 3rd, depending on what I want to watch.
Is there a way to do this? I can't seem to find it in the manual.
Anyhelp is greatly appreciated.
Ymir

A few approaches, one way is to set a variable to keep trakc of which menu you are on, then set the menu command for the track to a script
Here is a thread where a detailed this process and there is also a link to a project you can download.
http://discussions.apple.com/message.jspa?messageID=6585885#6585885
You would set the menu command to the same as the end jump.
There are also other ways, but that will work. Another way is to set the menu command action for the chapter markers themselves. Also note that you may want to consider what you want the menu command to do If you play through the first ten markers (let's say) marker 11 may be on the 2nd selection menu, and you will probably want people to go there. In that case bypass the scripts and just set the menu jumps in the connection tab

HT1688 How do you add to the birthday calendar when info is not included in Contact info, i.e. child's birthday?

I'm trying add birthday info that I maintained on my former cell phone which had an option for addition of independent birthdays. From what I've read in the IPhone 4 Manual, this type of info is only added when part of a Contact's info (Address Book Info). So what about independent birthdays, like a child or children of a Contact? I don't want to add each child as a separate Contact as this would be a waste of space. Other than creating an event in the main calendar, is there a method to add these birthdays with the birthday icon & preferred Alert notifications?

I've run into this problem before when using a VI that's in the Advanced Analysis library. Building the DLL resulted in "lvanlys.dll" being copied into the "data" directory of the place where I created the DLL. When distributing the LabVIEW DLL I had created to the target platform I had to also distribute the "lvanlys" DLL. In my case there was no license issue since there was a license for the target machine but it only had the run-time engine installed. I don't know why the "lvanlys" DLL wasn't in the run-time engine install. All I know was that I had to include the "lvanlys" DLL to tag along when I distributed my LabVIEW DLL. I suspect a similar situation is occurring with you and you need to provide these "auxiliary" DLLs if they're not in the run-time install directory of the target machine. You will need to check about any licensing issues though!

I am new to mac. I have a Mac Book Air with an external CD drive. How do you safely disconnect the external drive when done without having to power off the laptop?

I know there is a way to safely "disconnect" the USB, I just can't remember what it is. Thanks

Hi kbstuckr,
Go to your Finder. You will see the drive listed with a little arrow with a bar below it next to the drive. Click on that to "eject" it.
Cheers,
GB

How can you automatically start the next Podcast?

When an audiobook finishes, the next audiobook automatically. How can I get podcasts to do the same? I listen on bike rides and it is difficult to have to switch to the next podcast.
Windows XP

Hi
Welcome to Apple discussions.
2 options (neither of which are particularly great)
First - drag the relevant podcasts into a playlist in iTunes, sync your iPod and then off you go!
Second - Create an on the go playlist of the relveant episodes on your iPod.
I think the thinking behind this is that Apple assume people only have one podcast at a time to listen to i.e. one a day/ week etc. You are right though, it would be nice just to have a preference to set to do what you want.
You should leave your feedback here:
http://www.apple.com/feedback/ipod.html

How do you automatically clear the clipboard in iOS?

Is this possible? I know how to do it manually.

After one enters the Date/Time in Pages '09, the Edit Date & Time item on the contextual menu provides a checkable Automatically update on open. Every version of Pages v5 lacks this capability, and the auto-update setting will be ignored in a Pages '09 document opened in Pages v5.

How do you make Firefox the default browser when the normal way doesnt work?

Im trying completely from chrome after a friend showed my how much firefox has got its act together. However i cant for the life of me set it as the default browser. I have tried the "make firefox the default browser" button in firefox, which simply opens the windows default programs panel. Whenever i try to use the panel it simply sets the http protocol to nightly which isnt even installed!( http://puu.sh/2vJHM ) I think a possible fix would be to manually change the registry, but i wouldnt know where to start.

Did you check the box on ''Options > Advanced > General >[X] "Always check to see if Firefox is the default browser on startup"?
Have you restarted Firefox and if so, or when you do so, what does that section on the advanced Firefox options show?
Have you tried restarting your system after setting the default browser using the second suggestion and, after restart, check the setting per the second suggestion to see if that setting is holding?
Updating your Plugins would have no affect on the default browser question. It was something that you needed to do to avoid security issues online by using an out of date version of Java. Java is not involved in the default browser issue. That is why I separated it from the first part of the reply with a line and began with the word "Other".

How do you findout if the values of varables have changed in a class

Hey Hey,
I have a number of classes which contain varables. I need a way of knowing if the values of the varables have changed. so i can do a job. is there a easy way of finding this out maybe by hash or size?
ive worked out i can get a array of all the fields in the class like this
         Field[] fields = cls.getDeclaredFields();

Well, usually you do build support for this kind of stuff into the class itself. I usually do it by using Java's PropertyChange stuff:
import java.beans.PropertyChangeListener;
import java.beans.PropertyChangeSupport;
public class ChangeReporter {
private final PropertyChangeSupport pcs;
private int field;
public ChangeReporter() {
    pcs = new PropertyChangeSupport(this);
public void setField( final int newValue ) {
    if (newValue != field) {
      pcs.firePropertyChange("field", field, field = newValue);
public void addPropertyChangeListener( final PropertyChangeListener pcl ) {
    if (pcl != null) {
      pcs.addPropertyChangeSupport(pcl);
}For additional information see the relevant API documentation.

How can you update to the same row when........

Ok so now I have Session variables working correctly and come
to find out that my host creates a new DB connection for each page
displayed. So the Last_Insert_ID() will not work because of the new
connection each time. What are my options for updating a row after
an insert. I am using MySQL 4.1 and CF 7.
Thanks
Shane

Hi Sankalan, thanks for your input. I am trying now to get
the following code to work on the Insert page and keep getting this
error "Element AD_ID is undefined in LASTINSERTID"
Not sure what is wrong but I have tried many different
changes and it still will not clear the error.
Any help would be great.
Shane
<cfparam name="SESSION.Last_Insert_id" default="1">
<cflock scope="Session" timeout="30" type="Exclusive">
<cfset SESSION.LAST_INSERT_ID=#LastInsertid.AD_ID#>
</cflock>
<cfquery name="LastInsertID" datasource="saa">
SELECT LAST_INSERT_ID() AS AD_ID;
</cfquery>
<cfoutput>#LastInsertid.AD_ID#</cfoutput>

How do you stop F11 and F12 beeping when I change volume?

I've looked in the systems preferences but I cannot find an option to turn this beep noise off, anyone know?

You're welcome, glad to have helped & thanks for the star
Steve

How do you automatically maximize the active video when it changes...

Similar Messages

Maybe you are looking for