How do you bookmark to a folder with the keyboard?

Since getting in to the habit of better organizing my bookmarks, I have bookmark folders that are up to three levels deep.
How can I save a bookmark to a specific folder without having to use the mouse or click "Choose..."?
It would be nice if there were a way to just type it, with folder suggestions coming up.
I.e. I would be able to hit Ctrl+D, type the name, hit tab, and type Classes\303\HW to have it bookmark to that folder. Right now, I can only bookmark to recently used folders with the keyboard.
I know this can be done with the mouse, but I am looking for a fast way with the keyboard, possible with a plugin of some sort.

I will check out the add-ons, see if there is anything that would make it a little faster, but the '''ctrl+d, tab, tab, space combination''' should be good enough for now, I'm surprised I missed that. I knew about the five most recent, but that wasn't enough for me.
Thanks for the help!

Similar Messages

How do you select a single image with the keyboard?

I can use the "/" key to deselecting the current photo but how do I select the current photo with the keyboard? Usually the space bar is used for this but that displays the image. Is the only way to select the current photo by using the mouse?

OK, now that the question has been clarified....
Pressing and holding the Shift key as you move through the grid with the arrow keys will individually multi-select them, but that breaks down if you want non-contiguous selections, i.e. lifting off the shift key to skip a photo will cause all previous selections to be lost when you use the arrow key to advance. I think the only way for non-contiguous selection is ctrl-click.

How do you mark your 'in' point with the keyboard?

I know you can mark the first frame of your selection by hitting the mouse button but I find I press the spacebar to start previewing the source footage and stop the playhead at just the right point where my 'in' should be. Now as soon as I move the mouse the playhead jumps to a different part of the clip, this results in me losing my 'in' point.
What I want to do is hit the spacebar to stop at just the right point, hit a key to mark my selection, hit spacebar to resume playing and then finally hit shift-A to mark my out. Any ideas?
Thanks,
Dave

Could you describe your workflow in producing Quicknotes.
Basically I use a screen/system audio capture application to capture what I am doing in an application along with any audio being produced. There are many such applications available, but I tend to stick with Snapz Pro X which I have been using for years. My somewhat old PPC G5 limits me to captures of about 960x540 at 24 fps. This step, of course takes place in "real time." With iMovie '08, I would had to transcode the captured data to compatible compression formats, but with iMovie '09 it looks like I can go back to using the default Animation video codec which I prefer.
Once the screen captured data is stored to a file, I bring it into iMovie for a quick edit -- usually just a quick trimming of the length, adding a title, and adding simple opening/closing cross-fades. When done, I output the edited content via the "Export Using QuickTime" option -- normally as AIC/AIFF but will likely try Animation/AIFF on my next one. The editing process takes only a few minutes but exporting adds additional time.
At this point I import the edited file to GarageBand for a quick voiceover. I use this approach so I can keep a copy of the iMovie exported file for reuse at some later time. (My original intention was to eventually go back and correct my voiceover mistakes but I never seem to get around to doing this as some new project is always coming up.) For this step I generally use a Blu "Snowball" USB mic. In any case, the voiceover is also in real time. I normally export the finished file using the "Full Quality" mode so as to avoid a further transcoding of the video track. (It also saves time if no video re-compression has to be performed.)
At this point it is merely a matter of targeting my final output. For my web content, I usually use MPEG Streamclip to convert the GarageBand file to an H.264/AAC file with a targeted video data rate of 1.0 Mbps. If I decide to post the file in an MOV file container, I then open the file in QT Pro and set the "poster frame" for iWeb use. If for any reason I wish to preserve the MP4 container, I use iTunes to "poster frame" the file.
As previously implied, I use iWeb to actually post the file. In this case, the tutorials are posted to a separate "Podcast" page collection since the are easy to maintain; allow user comments, RSS notifications (which I've never tested), and searches (also untested). Primarily I liked the ease with which I can duplicate a previously posted video entry and simply drop in the new clip and modify the text changes. Posting the update is, of course, as simple as pressing an icon button and waiting got the upload to finish.
I have completed the work flow in as little as an hour but my average is closer to 90-120 minutes since my wife and/or pets usually want some sort of attention during the process. You may have noted Gracie (a Congo African Grey) or Mango (an Amazon Orange Wing) in the background of some of my voiceovers. And that, as they say, is all there is...
You should really consider posting these on YouTube.
Not really something I ever wanted to do. I have my own MobileMe account, most viewers I'd want to reach are Mac owners and users, so I am not really interested in reaching out to the "world at large."

How do you view lyrics on itouch with the new Jan. software update??

How do you view lyrics on itouch with the new Jan. software update??
Thanks!!

1) You need to have the paid upgrade installed.
2) You need to paste the lyrics into the lyrics tab of a song/album.
3) You need to re-sync the Touch.
4) When playing music, you click on the album cover (in portrait mode only) and the lyrics will superimpose on the screen.
Scott
Message was edited by: A A P L

How do you create a new folder in the library folder

How do you create a new folder in the library?

In the user Library? Open Finder and select Go then press the Option key. In the list you will see your user Library folder (underneath Home). Click it to open it. Now you can add a folder inside. You can left click/hold and drag the Library icon at the top of the Finder window to your Finder Sidebar so it's always avaliable.

HT1766 What if an ipad is the only device you have from Apple? How could you back your things up with the cloud ?

Hi my issue is that I dropped my ipad, and the screen is now blue. I have tried pressing the power button and the center button (I even pit it on the charger), but the screen is still blue. My questions are am i covered to get a replacement, and how do I back-up my stuff with the cloud if the ipad is my only apple device?

If you didn't have iCloud backup turned on before you broke it, you are out of luck.
Accidental damage is not covered by warranty.
You can get an out of warranty replacement from Apple for around $250.

How do I use Panorama / Tab Groups with the keyboard?

Yes I know that CTRL-SHIFT-E opens the panorama window, and then I can use the mouse to organize my tabs into groups.
But how do I do this with the keyboard?
I've [http://lifehacker.com/#!5719596/switch-between-tab-groups-in-firefox-with-a-keyboard-shortcut read] [http://ubuntuforums.org/showthread.php?t=1705714 that] Ctrl-`should move me through tab groups. That doesn't work for me on my Danish keyboard. (Where the ' and ` chars are weird. But is how they are on a valid standard Danish keyboard) I've tried changing the keyboard to USA and then moving through tab groups works fine.
In short: Pretend I don't have a mouse. How do I use Panorama / Tab Groups?

Sorry. These are both known bugs:
[https://bugzilla.mozilla.org/show_bug.cgi?id=587010 Bug 587010] - Add keyboard UI for manipulated groups and tabs in Tab Candy
and
[https://bugzilla.mozilla.org/show_bug.cgi?id=626594 Bug 626594] - shortcut for switching tab groups is badly accessible on many non-US keyboard layouts

How can I add a Mail folder with the "Inbox, Sent, and Trash" folders? I have Windows 8.1

After I installed the 7.0.6 update, my iPhone crashed & had to do a restart. I saved my Contacts. I've been syncing my iPhone to store data on my PC instead of iCloud. I'm assuming all of my pictures etc. are in the iPod Photo Cache, which I cannot open since they are THMB files. How can I view all of my "lost" data without having to pay for the "Converter" program, which according to many of the people in my boat, say doesn't work & is a rip off? I'm also trying to put an "Archive" folder back in my Mail folder. I've tried to follow instructions but my iPhone 7.1 does not have the same options. All of this is so frustrating.....load an upgrade & screws a lot of stuff up. Just like "Trust this computer?" on 7.0.6 update. Anyway, I hope someone can help with these minor problems.
Thank you.
Leo Nard

Not in Mail. If you referring to not having to use the menu, you can click the + sign at the bottom to create new mailboxes. But you still have to fill in the window with location and name. You can right click to create a new mailbox on an existing one, but not in the main account itself and you still have to fill in the info. It would create a sub folder.
You can also try it at the gmail website. There might be shortcuts there.

How Do You Make an Image Flow with the Text?

Hello all,
I am using CS4 InDesign on Windows Vista. I am fairly new to Indesign but try to do my research and homework well before asking what I hope is not a really dumb question.
I am writing a book of approx. 350 pages that is an illustrated encyclopedia of 156 plants and their oils.
Each 2 page spread is a single entry for a plant. The graphics frames on each spread are identical in size, position and styles for a consistent look throughout the document.As you can see (hopefully) each page is a single column. See screenshot below
In order to overcome my first problem of positioning and sizing the graphics frames uniformly, I created the master pages with the graphics placeholders sized, positioned and formatted to my liking. This worked wonderfully and I placed all of my 300+ graphics by simply over riding each frame.
Then in my editing I decided to add another 2 page spread somewhere in the middle of this fairly large document.
What a NIGHTMARE. The text predictably shifted but now ALL of my graphics were no longer associated with the corresponding text! Arrrgghhh.I had not anticipated this behavior (used MS Word for 15 years) or I would have done something different.
3 hours later I finished re -"placing" the images associated with the correct text.
I researched the help file and found out about the neccessity of anchoring graphics to text. I have read through the threads in this forum, followed links to "indesignsecrets.com/make-an-image-flow-with-the-text" and " Working with anchored objects by Anne Marie Concepcion"
My concerns are this.
An inline graphic places the graphic back onto your text layer for some reason ( Previously my graphics each had their own layer)
Not wanting to start (again) from scratch with my graphics I converted them to inline/custom anchored objects.
But to select then cut then paste every pre existing graphic to anchor it inline seems to be cumbersome and counter intuitive although the top smaller graphic did position well and the text seemed to wrap ok.
When I placed the larger bottom graphic on the left facing page using custom positioning I was not able to get the text to wrap at all.( The in line anchoring did not seem to allow for positioning on anything but the 'Y' axis).
It seems that there would be a simpler way to place text and graphics where you want them and have them associate and flow together (or not) when you want them to and have text wrap easily around an anchored object without keyboard gymnastics. It would seem that the concept of a certain graphic being associated or linked with certain text would not be an unusual concept in desktop publishing.
Am I missing something?
Can you place an anchored graphics frame on the master page with your desired options?
How would this be done if possible?
Is there any other way (i.e grouping) to keep graphics associated with the desired text so that it flows together if extra pages are added?
Is the fact that my graphics frames are on my master pages responsible for my text wrap difficulty? (I have text wrap enabled on my master pages)
Are there any settings, redundant or otherwise, I need to be aware of?
Thank you in advance for any suggestions or directions
L.N.

Hello Again,
Thank You Bob but I am still a little fuzzy on this. I have already created object styles for the graphics frames. For instance the small graphic underneath the heading (Its a drop of oil) has an object style applied. Now I checked and it has the anchored object options checked in the style dialog box. When I reapply the style to the next similar graphics nothing happens. It is still not anchored. Do I need to create a new style based on "nothing" add my effects plus the anchoring options? Basically start over. If thats what I need to do thats OK. As to your instruction that object styles could accomodate this anchoring thing...thats what I thought too but somehow I can't get it to work. See object style dialog box screenshot below:
For the larger graphic on the bottom of the left facing page. I still cannot get any text to wrap. In the screenshot example the text describing this particular plant doesn't go to the bottom of the page so the wrapping issue on this page is moot. However I have some entries where the body of the description is more involved and does go to the bottom of the page and the text WOULD need to wrap around the plant (larger ) graphic.
Hi there Harb, Yes I found out early on that object styles can't apply size (that would be on my wish list for sure) That is why I found that creating my graphics frames on the master page with the correct size, effects and positioning tickled me so much. Can you believe I originally went through and MANUALLY resized and repositioned each and every 300+ graphics in this book but it still wasn't right. I'm nothing if not persistent. (Now if I could just get my grown sons to pick up their socks!)
Anyway the master page graphics frames idea would be perfect if I could get the images to anchor in their respective spots on the master page as well.
For your second suggestion. I am not clear about why I would need to break the threads of each spread so that each spread is a seperate article. Is the threading issue the thing that is causing my text to move on leaving their associated graphics behind? If so how do I go about doing this?
So to recap:
1. I need to know if I can modify my object style or recreate from scratch with the anchoring option (as I said it didn't work)
2. Can't get text to wrap around the Custom anchored graphic at bottom of page at all
3. Im not clear on the breaking the threading on the spreads
I am willing to go back through and start from scratch (new master pages, styles etc ) if neccesary. This book is the culmination of 7 years of research and artwork.Basically the project is DONE. Now if I can just format it correctly.
I can't thank you both enough for your time, suggestions, expertise and patience.
Thanks again
LN

How can you create a karaoke video with the music lyrics?

I'm working on a generic music video. I want to add written lyrics to the video so that people watching can follow along with the singing. What is the best way to create trailing lyric highlights to the way the song is sung?

QuickTime Player Pro ($30) and lots of patience.
QuickTime Player supports "text" tracks and, with some special manipulation, can display the text "karaoke" style.
QuickTime Player 7.6.6 (not the X version) can play ".kar" files. Millions of them found on the Web and easy to download. They include MIDI audio (computer generated sound) and are very tiny in file size.
http://homepage.mac.com/kkirkster/64/
I downloaded a .kar file using QuickTime Player Pro and the Movie Properties window, extracted the text track and then changed the text using TextEdit. I then added my new text track and deleted the original.

How do you get mod_perl to work with the bundled apache2?

I have read a few reports on how to get DBD perl working and some people talk about compiling apache 2 and mod_perl, but I want the standard apache2 which is running smoothly with my php install to handle perl too.
Can someon give me a list of commands and steps to do and run to get this working? I know php, a bit of C have compiled before but allways forget how it is done. I have no problems editing httpd.confs or php.inis so probably perl's configs and configure files won't be a problem. Thanks in advance.

Thanks for the thought etresoft. I did not find it in the httpd.conf as an so module to be enabled, so I presumed it was nowhere to be found. But it seems it is in the /usr/libexec/apache2 folder just like all the other modules, find found it .
I just added this to my httpd.conf and now it is working:
LoadModule perl_module libexec/apache2/mod_perl.so
Alias /perl/ /Library/WebServer/Documents/perl/
<Location /perl/>
 SetHandler perl-script
 PerlResponseHandler ModPerl::Registry
 PerlOptions +ParseHeaders
 Options +ExecCGI
 Order allow,deny
 Allow from all
</Location>
I was stuck mentally it seems. Thanks for the bump.

Giving "focus" to a folder in Mail: only with the keyboard?

Hello everybody,
I've found that in Mail, you can choose a folder with the mouse, but that you cannot activate it, you cannot give it the focus.
When you click on a folder, it becomes pale blue and the arrow keys do not allow to go from one folder to the other. The focus is in the mails pane.
The only way to give the focus to a folder is through the keyboard, using Shift-Tab (or Tab several times): the folder then becomes dark blue, it "has the focus", and the arrow keys allow to go from one folder to the other, or to open and close folders.
This is an interface issue, and is highly unusual. Am I the only one to observe this?
If I am the only one, then I have a bug somewhere. If not, Mail has an interface problem that I will report to Apple, hoping for the best.
Thanks for your input, and Cheers!
Roger the Photographer
G5 1.8Dual, 2GB RAM Mac OS X (10.4.8) 20" App Dsplay, ext. Lacie, iPod, Bach on Al-Lansing, Canon 5D, Canon L glass

Hello Roger.
What you’ve described is exactly how it works.
Although I agree that this is non-standard behavior,
I have the feeling that it’s intentional, not a bug.
There are other situations in Mail where the view
that handles the keystrokes is what the user is most
likely to want rather than what has focus.
If you have the preview pane visible, for example,
and the view that has focus is the message list, the
arrow keys let you select another message, but the
Page Up/Down keys are handled by the preview instead,
regardless of whether it has focus or not. Only if
the preview pane is hidden does the message list
respond to Page Up/Down keystrokes.
Hi David,
I've just discussed the thing rather extensively with an ex-senior scientist at Apple. I think that he is right - as you are -, this is intended behaviour.
Whether it is a good idea or not is a different matter however. Apple's keyboard commands have never been as complete, or precise, as Microsoft's. Remark that this is not a compliment to Microsoft whose interface is at times simply terrible! But here, it's not the keyboard command policy that is not systematic, it's the response of the mouse. And this I find very surprising. I have 51 mailboxes in Mail and the more control I have, the happier I am, that's for sure!
On the other hand, what surprised me is the fact that the mouse does not respond in the same way in, say, Mail and iTunes. In iTunes, if you click on a "folder" (they call them playlists, which is fine, but this is about the same as a folder is it not?), not only you select it, but you activate it: you give it the focus plain and simple.
Look at Font Book: here also, you have what a power user is waiting for: clicking on a "folder", or a list or group, you give it the focus plain and simple. Idem in Address Book. iPhoto also, but then it's the tab key behaviour that's strange.
I can see from here programming teams clashing over points like this one. I would greatly prefer that Apple's applications adopt a predictable behaviour from one app to the other.
"Behaviour by design", all right. I will nonetheless send to Apple what we could call an "enhancement request".
Cheers!
Roger the Photographer
G5 1.8Dual, 2GB RAM Mac OS X (10.4.8) 20" App Dsplay, ext. Lacie, iPod, Bach on Al-Lansing, Canon 5D, Canon L glass

A phantom folder with the name of a folder that held photos has appeared in my finders places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

a phantom folder with the name of a folder that held photos has appeared in my finders>places list. I can't choose it to delete it. it won't move. It can't be found in a search. How can I choose it and delete it?

Can you drag it off holding down the CMD key?
Do a search for it with EasyFind (try different settings in "Operator")
http://www.devontechnologies.com/products/freeware/

When saving files under options the file name is duplicated how to remove extra folder with the same name

Under Firefox Options I clicked Saving Files under Downloads but the file name appears twice and an extra folder with the same name is created within the folder i.e.:
G:\Akbar's Songs\HAMARA FORUMS DOWNLOADS\HAMARA FORUMS DOWNLOADS
As you can see the folder is repeated, how can I correct this?
Also the music files I download from a site downloads as WinRar file and I need to open it. Is there an option where the files open automatically in the folder I have selected?
Many thanks for your help.

The "beta" version is for testing and may be more prone to problems, so I suggest trying the regular version (9.20) even though it hasn't been updated since 2010.

How do you compile Flex-dependent classes with ASC?

Hi,
I've been trying unsuccessfully for most of the evening to compile a .as file that relies on mx.collections.ListCollectionView using asc. I figured I could just import the Flex framework SWCs from the command line with asc, but asc doesn't seem to respect SWCs - it only seems to respect .abc files.
So, I've spent most of my time trying to compile the Flex framework into a single .abc file that I can import whenever I want to compile a class that relies on Flex. I figured I could make a base .as file with include statements for all of the Flex .as files (copying the approach I saw for files like builtin.as) and compile that, but all I seem to get are compiler errors - mostly "[Compiler] Error #1181: Forward reference to base class (base class name)."
I have a feeling I'm doing this completely the wrong way. I'd very much appreciate any assistance that anybody can offer me.
Thanks,
- max

<div class=Section1> color:#1F497D'>I use MXMLC to compile my .as file projects.<o:p></o:p> color:#1F497D'><o:p> </o:p> color:#1F497D'>Alex Harui<o:p></o:p> color:#1F497D'>Flex SDK Developer<o:p></o:p> color:#1F497D'><a href="http://www.adobe.com/">Adobe Systems Inc.</a><o:p></o:p> color:#1F497D'>Blog: <a href="http://blogs.adobe.com/aharui"><span style='color:blue'>http://blogs.adobe.com/aharui</a><o:p></o:p> color:#1F497D'><o:p> </o:p> <div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0in 0in 0in'> From:<span style='font-size:10.0pt;font-family:"Tahoma","sans-serif"'> Maxim Porges [mailto:[email protected]] Sent: Monday, February 09, 2009 9:22 PM To: [email protected] Subject: How do you compile Flex-dependent classes with ASC?<o:p></o:p> </div> <o:p> </o:p> A new discussion was started by Maxim Porges in Developers -- How do you compile Flex-dependent classes with ASC? Hi, I've been trying unsuccessfully for most of the evening to compile a .as file that relies on mx.collections.ListCollectionView using asc. I figured I could just import the Flex framework SWCs from the command line with asc, but asc doesn't seem to respect SWCs - it only seems to respect .abc files. So, I've spent most of my time trying to compile the Flex framework into a single .abc file that I can import whenever I want to compile a class that relies on Flex. I figured I could make a base .as file with include statements for all of the Flex .as files (copying the approach I saw for files like builtin.as) and compile that, but all I seem to get are compiler errors - mostly "[Compiler] Error #1181: Forward reference to base class (base class name)." I have a feeling I'm doing this completely the wrong way. I'd very much appreciate any assistance that anybody can offer me. Thanks, - max <o:p></o:p> <div class=MsoNormal> <hr size=2 width=200 style='width:150.0pt' align=left> </div> View/reply at <a href="http://www.adobeforums.com/webx?13@@.59b7d5d2">How do you compile Flex-dependent classes with ASC?</a> Replies by email are OK. Use the <a href="http://www.adobeforums.com/webx?280@@.59b7d5d2!folder=.3c060fa3">unsubscribe</a> form to cancel your email subscription.<o:p></o:p> </div>

How do you bookmark to a folder with the keyboard?

Similar Messages

Maybe you are looking for