How do you boot from a Windows CD (Ghost in this case) in Boot Camp ?

I installed Bootcamp about a year ago. I used Norton's Ghost to make a disk image of my C: drive in Bootcamp for a backup. My machine is now misbehaving and I want to reinstall my orginal image from Ghost. However, I cannot figure out how to boot from the Ghost CD to begin the process. If I tap f8 or f2 or delete key nothing happens to bring me to that BIOS screen where I can choose which device I want to boot from at start up. Any ideas? Thanks

Hello deacm,
Supposedly you can insert your CD in the drive and, upon restart, (immediately after the chime) hold down the "C" key until the screen shows "Press any key to boot from CD". For some reason, this does not work for me.
If the above step didn't work for you, you can try the following steps that works for me:
1) If you can boot into Windows, insert the CD (close any windows that pop up), go to the Control Panel>Boot Camp and select the CD as the startup drive, then restart. The screen will briefly display "Press any key to boot from CD" (for only a moment) so press any key immediately.
2) If you can't boot into Windows, in Apple's System Preference, select "Startup Disk" and then click on the Windows partition. Close System Preference, insert the CD and (after a couple of minutes when the CD is recognized) restart. Immediately after the chime, hold down the "Option/Alt" key. Select the CD and press "Return". Moments later, the screen should display "Press any key to boot from CD", then press any key.
Good luck,
Gary
Message was edited by: Gary Kawamura

Similar Messages

  • How can you use symbols in Windows 7 on a IMac 27

    How can you use symbols @$€%£¥ in Windows 7 on a IMac 27 mid 2011?  I tried what was normally done on Windows and got nothing.  Alt plus numbers and nothing happens, what am I missing?

    Frosted Flake,
    Are you referring to an equivalent to the Windows Character Map Application (charmap.exe) that allowed you to see the various characters available in each font, and then give you an ALT-nnn number you could key to use the character you wanted ?
    If so you can use the Special Characters from the Edit menu of most applications. Once you have located the character/symbol you want double click it and it will be entered wherever you cursor is located in your application.
    Further information can be found here :
    http://support.apple.com/kb/PH3871
    Hope this helps
    Cheers
    AF

  • How can you upgrade from OS 10.4

    How can you upgrade from MAC 10.4.4

    Backup your computer.
    Buy Snow Leopard.
    Boot from Snow Leopard DVD.
    Erase the hard drive.
    Install Snow Leopard.
    To get Snow Leopard:
    Upgrading to Snow Leopard
    You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s iCloud services; fees and
               terms apply.
    To upgrade further see:
    Upgrading from Snow Leopard to Lion or Mountain Lion to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8, Lion, or Mountain Lion installed. Purchase and download Mavericks (Free) from the App Store. Sign in using your Apple ID. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mavericks- System Requirements
           Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
                 Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
             7. Xserve (Early 2009) — Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
    Are my applications compatible?
             See App Compatibility Table — RoaringApps.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.

  • How to transfer pictures from computer ( Windows 7) to iPad with Retina display ?

    How to transfer pictures from computer ( Windows 7) to iPad with Retina display ?

    Note that, if you use iTunes to sync photos onto the iPad, you'll need to use iTunes to take them off.
    if you don't have a lot and want to keep deletability, you may want to consider mailing them to yourself, or uploading them to something like dropbox, then downloading them (via the dropbox app) to your iPad.
    there are also several photo syncing apps out there that may suit your needs. Afraid I don't have any to recommend. But syncing via iTunes isn't the only way to get photos onto your iPad..it's just the  built in way

  • How to transfer picture from pc (windows xp) to my ipad2

    hi every one,can you help me how to transfer picture from pc (windows xp) to my ipad2

    From your Old Computer... Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
    An Added Bonus is that you will then have a Backup of iTunes...
    Backup iTunes to an External Drive
    http://support.apple.com/kb/HT1751

  • How do you boot an iMac with an external hardrive?

    How do you boot an iMac using an external hard drive?

    hold the Option key at startup to invoke the Startup Manager and select you external hard drive to boot from.

  • How do you pint from pad 2?

    How do you print from ipad 2?

    You can also get applications like Printopia (Mac OS X only) or FingerPrint (Windows and OS X).
    Let me know if you need more help.

  • In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    In Pages 5.2.2: How do you go from 1 column to 2 and keep them on the same page?

    Sorry, I tried to say your answer solved my question, but I guess I told it that my response to you solved it. Now that I liked it, the solved option doesn't appear.

  • How do you switch from one iTunes account to another on your apple tv?

    How do you switch from one iTunes account to another on your apple tv?

    Welcome to the Apple community.
    I assume you do mean a different account and not simply a different iTunes library. Unfortunately, in order to switch accounts, you would need to log out and log in to the second account.

  • How do you upgrade from Mac OS x 10.6.8 to Lion?

    How do you upgrade from Mac OS x 10.6.8 to Lion?

    First check to be sure your hardware meets the hardware requirements for Lion.
    Backup your data. I suggest a bootable clone as the way to go.
    Then open App Store and purchase and download the Lion installer.
    Then install Lion.
    Allan

  • How do you stream from my mac to apple tv

    How do you stream from my MacBook Pro to my apple tv?  I want to watch a show that is on the internet.

    Welcome to Apple Support Communities
    See > http://support.apple.com/kb/HT5404 If your computer is compatible with AirPlay Mirroring, you can use it to mirror the computer screen to your Apple TV.
    If your Mac isn't compatible with AirPlay Mirroring, you can use a third-party app, like AirParrot > http://www.airparrot.com

  • HT4211 How do you switch from multitasking mode back to normal display mode?

    How do you switch from multitasking mode back to normal display mode?

    You mean switch from showing the recently used apps bar or dock back to regular home screen display mode?
    If so, select the Home button.

  • HT1551 How do you mirror from an iPod to 3rd generation apple tv

    How do you mirror from an ipod to 3rd generation apple tv

    Welcome to the Apple Support Communities
    You can only use AirPlay Mirroring if you have a 5th generation iPod touch > http://support.apple.com/kb/HT5209
    If you are referring to AirPlay > http://support.apple.com/kb/HT4437

  • How do you iMessage from the MacBook Pro

    How do you iMessage from the MacBook Pro?

    Lord Of The Weirdos wrote:
    And if you don't use that computer often be prepared for the mountains of new notifications the next time you run it.  Especially if your like me and use your iPhone and iPad a lot for texting people.  Wish iMessage in ML would know what you read somewhere else like iPad and iPhone does
    I don't quite understand what you are saying? If i recieve and read an iMessage on the iPhone and then switch on my Mac, I don't get a notification about a new message, but that iMessage appears on the conversation.

  • How do you create PopUp Layer Window?

    Hi!
    I have a question...
    How do you create PopUp Layer Window?
    PopUp Layer Window is a popup window that moves as an user
    scrolls up and down.
    And it cannot be blocked by popup bloacker.
    Please teach me!
    -p.b.p.

    Search the web for persistent layers.

Maybe you are looking for