How do you bypass the proxy for local addresses? It keeps prompting me for user id and password to access an intranet page

When trying to launch an intranet web site, it won't connect. It prompts me for a user id and password. I can get to external sites, and I have already added the site into the "No proxy for" dialog box

It depends where you publish your pages.
At MobileMe you can password protect a Site in iWeb. A Site is a collection of pages. If you want to protect a single page for a single person, you have to create a Site with one page and protect it.
When publishing at a 3rd party webhost, you can password protect a page or directory in a administration panel. Check with your host. iWeb is not involved there.

Similar Messages

IPad 4 asks for User Name and Password to access home wi-fi network

I have the iPad 4, which occasionally fails to connect to my home network and will ask me for both an User Name and Password to access my home wireless network. I have no idea what would constitute an User Name and I have tried the name of the network and other options to no avail. When I close down the iPad and take it closer to my Wi-Fi Router (BT Home Hub 3) then switch back on it asks for the password only as normal and all is well. What concerns me is this only happens on the occasional basis, but I am trying to access the router from exactly the same place.
Is there a fault with the wireless function on the iPad? I have contacted Apple Support by telephone and they were very helpful to be fair, but they had not come across this issue before.
Has anyone experienced anything like this and could advise me? My other option would be to email Apple Support, but I cannot find an email address for Apple Technical Support UK.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can you use the same e-mail address for multiple ipads?

I have two iPads.. an iPad and an ipad 2. I registared my new ipad 2 and now my old ipad is will not let me log on and is telling me that my e-mail address is already in use. how can you use the same e-mail address for multiple ipads?

And by using the same Apple ID you can also share purchases. If you have a different Apple ID for each iPhone then you can't share purchases.

How do you set the duration for multiple stills in iMovie 2013?

How do you set the duration for multiple stills in iMovie 2013?
Before upgrading to the latest version of iMovie last month, I was able to set the duation of all of the stills included in an iMovie project at one time by clicking the apply to all still box in the adjustment pop up. That option is no longer apparent. If it is available I cannot find it, and I have tried several different ways to accomplish it. I have tried the iMovie help section and can find nothing to help.
Apple, do I really have to adjust close to 500 pictures to a 5 second duration individually???
REALLY??!!

...why wouldnt people want that level of accuracy when animating, especially when working to music at a specific duration?
Because often people are animating to words or beats in the music. Music is rarely performed with a computer-precise beat and tempo. Musicians aren't robots: they swing the beat sometimes. They use rubato. They change tempo. They change time signatures. As a result, you have to FIND those words and beats. It's not a situation where you can say, "There! I've found the duration of one beat! Now it's easy to find the rest of them!"
If you try it, you will be very disappointed.
Try finding the precise end of a piece of music that fades or ends on a big chord with a ring-out. You'll see that it's trial-and-error: what's the point where it becomes inaudible? It depends on how high your speakers are turned up. You might have them way up, you set an end point for the layer, and then you do a RAM Preview at a more reasonable volume. You might say, "Hey! The music ends before the layer ends!"... but you KNOW you set the layer's out point when the audio file goes silent.
AE has layer markers that can be used on an audio layer to mark beats, words, etc. They come in very handy.
I guess it comes down to this: because AE can do so much different stuff, there are very few automated procedures. Oh, Adobe tries with effects that convert audio levels to keyframes, but they're not 100% reliable... especially on something like a capella choral works. For true accuracy, you need find the timings yourself.
If you want something simpler, try a different application. But be prepared for lower level of accuracy.

How do you set the time for this forum??? Not in nerd pleas

how do you set the time for this forum?

There were problems with the correct time display for postings, and based on another recent post this doesn't seem to have been fixed. My advice... don't worry about it.

When you drag a link onto your desktop, how do you change the image for the shortcut?

When you drag a link onto your desktop, how do you change the image for the shortcut?

Select it, hit command-i (or choose File -> Get Info), select the icon in the info window and paste something else there.

How do you find the phone's mac address for Droid RAZR Maxx HD?

how do you find the phone's mac address for Droid RAZR Maxx HD?

Ann154 wrote:
WalrusM wrote:
how do you find the phone's mac address for Droid RAZR Maxx HD?
It is listed under the advanced options for the WiFi settings or About Phone > Status within the phone's settings
Motorolas list them under About Phone > Status.
Edit: Oh, snap! It is listed in both places. Nevermind! Please excuse!

Hi, how can i break the value for a row and column once i have converted the image to the array???????

Hi, I would like to know how can i break the value for a row and column once i have converted the image to the array. I wanted to make some modification on the element of the array at a certain position. how can i do that?
At the moment (as per attachhment), the value of the new row and column will be inserted by the user. But now, I want to do some coding that will automatically insert the new value of the row and the column ( I will use the formula node for the programming). But the question now, I don't know how to split the row and the column. Is it the value of i in the 'for loop'? I've tried to link the 'i' to the input of the 'replace subset array icon' , but i'm unable to do it as i got some error.
Please help me!
For your information, I'm using LABView 7.0.

Hi,
Thanks for your reply.Sorry for the confusion.
I manage to change the array element by changing the row and column value. But, what i want is to allow the program to change the array element at a specified row and column value, where the new value is generated automatically by the program.
Atatched is the diagram. I've detailed out the program . you may refer to the comments in the formula node. There are 2 arrays going into the loop. If a >3, then the program will switch to b, where if b =0, then the program will check on the value of the next element which is in the same row with b but in the next column. But if b =45, another set of checking will be done at a dufferent value of row and column.
I hope that I have made the problem clear. Sorry if it is still confusing.
Hope you can help me. Thank you!!!!
Attachments:
arrayrowncolumn2.JPG ‏64 KB

Firefox asks for user name and password even though the proxy auto detection

After upgrading Firefox to ver. 6.01 and next to 6.02 Firefox asks for user name and password of proxy server even though proxy settings are set to Automatic detect proxy settings.

Sorry can't do anything more than offer support. We have been having this problem for months and support is clueless. Do you also have the migrating homepage issue? We can have 3 or 4 different homepage set-ups throughout the day. Between Verizon and FIOS, there isn't an employee in the corporation who cares about customer service. Since the failed email migrations dating back to Spring of 2011, we have had this login situation constantly. Our normal login count for a day is 12. We figure they are regulating traffic by having customers constantly login.

I bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

i bought an iphone 5 put a passcode i forgot it done a restore with i tunes and it is still asking for user id and password during activate how do i get around that ??

You need to contact the previous owner and have them follow these instructions: http://support.apple.com/kb/HT5661

Does the SI_ID for 'User Folders' and 'Users' remains same in CMC?

Does the SI_ID for 'User Folders' and 'Users' remains same across the environments. For my CMS it is coming as 18 and 19 respectively.
String siName = "User Folders"; // Users
IInfoObjects rpts = iStore.query("SELECT SI_ID FROM CI_INFOOBJECTS, CI_SYSTEMOBJECTS WHERE SI_NAME='"+ siName +"'");
IInfoObject iObj = (IInfoObject)rpts.get(0);
System.out.println("iObj.getTitle() = " + iObj.getTitle());
System.out.println("iObj.getID() = " + iObj.getID());
Any reference text/link for better understanding on this will help a lot.
Thanks & Regards

Typically I believe anything that is created by BOE when you install the product stays consistent across multiple environments that were deployed the same.
You probably should ask in the other [BOE forum|Business Intelligence Solution Architecture; just to confirm.
Jason

CIC0 - asks for user name and password on CRM

Hi folks,
I am a BASIS gui am facing a peculiar problem with our production CRM system. It is a CRM 5.0 system and we have no java stack . The customer service users have reported on a daily basis when they are logged into CRM system and working with CIC0 transaction for several hours, suddenly a pop up comes up stating
"The server <CRM server server name> is requesting that a user name and password be sent in an insecure manner (basic authentication without a secure connection) "
This is happening when a user logged on the CRM system itself. There is no java stack on this system, pure ABAP system. When this popup comes up, the user then puts his/her user name and password and hits ok and is able to continue with work only to be interrupted the next day in the middle of work. So they are able to login , keep doing their for hours and suddenly are asked to revalidate their user name and password.
1. If the user is logged in for several hours and is working fine, what happens suddenly that the user name, password is forgotten and requires to be re-inputted?
2. Is this related to the browser? But the users only work on CIC0 abap system, they do not open a browser , and this is not via portal or a web-ic link...this is all pure abap login via a sapgui.
3. I have copied the same user and am testing to see if the pop up pops up on me...but so far this pop up is not comming up for me....can this be related to user's local desktop windows or browser settingis there any password cache setting ..if so does it mean every time user tries CIC0, a cached password is sent to the server ......I am confounded ...where is the issue, what settings is this related to...
Thanks for any help...
regards, Vikram

Hello Vikram,
Apparently CIC0 makes use of WAS which requires separate authentication. This can possibly explain this issue. Just check if you have maintained the local SSL certificate. Also ensure SSO is also in place. Check STRUSTSSO2 for this.
Regards.
Ruchit.

IAC view and BSP iviews gives pop up for user id and password

Hello All,
I am facing a problem in quality portal.
we have SSO configuration between Portal and ECC system and the Jco connection using SSO with login tickets are working fine,test and ping both are succesfull.
The ESS and MSS webdynpro application are also working fine.
But the IAC iviews and BSP iviews says "session managment will not work ! Please check the DMS log files for details" and then ask for user id and password of the ECC system,But the system alias that i am using,is configured for SSO with logon tickets.
same iviews are working fine in devlopment system with system alias with SSO Login tickets but in qa it is asking for id and password ...
I have checked all the system properties also FQDN of ECC system is also maintained.
Please suggest what could be the issue ??
Thank you,
Regards,
Gunja

Hi,
When messages about Session management popup then it is 99% an FQDN issue, but you say you already checked it.
Did you also checked the parameters:
- ITS Host Name
- Web AS Host Name
... in your system object?
Cheers,
B.

ADF security - prompt for user id and password again on page forward

Hi,
I am working with ADF using JDeveloper 10.1.3 with Business Components and ADF Faces.
I have a Search page and a List page.
Both pages are based on the same view within the same application module.
The Search page is using the default Find and Execute Operations.
The Execute button has an action that navigate to the List screen.
faces-config.xml
<navigation-rule>
<from-view-id>/jspx/search.jspx</from-view-id>
<navigation-case>
<from-outcome>search</from-outcome>
<to-view-id>/jspx/list.jspx</to-view-id>
<redirect/>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/jspx/list.jspx</from-view-id>
<navigation-case>
<from-outcome>find</from-outcome>
<to-view-id>/jspx/search.jspx</to-view-id>
<redirect/>
</navigation-case>
</navigation-rule>
Security (Roles and Users) is based on the jazn-data.xml and web.xml
URL Patterns for the pages have assigned to the role.
Login Configuration is HTTP Digest Authentication
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>faces/jspx/search.jspx</url-pattern>
<url-pattern>faces/jspx/list.jspx</url-pattern>
</web-resource-collection>
<auth-constraint>
<role-name>APP_SUPPORT</role-name>
</auth-constraint>
<login-config>
<auth-method>DIGEST</auth-method>
</login-config>
Everything is fine when running the application from JDeveloper,
but when the application is deployed to the server (OC4J),
After logging into the system, the Search page prompt for user id and password again
on click of the Execute button.
Have anyone experience this problem before?
Thanks for any help.
Jim

Hi,
does the same thing happen if you change your protected resource from:
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>faces/jspx/search.jspx</url-pattern>
<url-pattern>faces/jspx/list.jspx</url-pattern>
</web-resource-collection>to:
<web-resource-collection>
<web-resource-name>APP_SUPPORT</web-resource-name>
<url-pattern>/faces/jspx/*</url-pattern>
</web-resource-collection>Brenden

AS/400 db2 database asks signon to AS/400 prompt for USER ID and PASSWORD when BO report is refreshed by client users

Post Author: LalitJoshi
CA Forum: Publishing
I have created a report which is using AS/400 db2 database.Connection is setup in a universe and through Client Access ODBC driver.
Users are trying to connect AS/400 db2 system through ODBC(Client Access ODBC driver) and full client BO 6.5.
It asks for signon to AS/400 prompt for USER ID and PASSWORD when BO report is refreshed by users.
Is there any way i can avoid the USER ID and PASSWORD as it is not feasible to give database USER ID and PASSWORD to each users.

> SAPClassNotFoundException:
> com.ddtek.jdbc.db2.DB2Driver
It looks like your JDBC driver is not found. Have you deployed the driver to XI?
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10</a>

How do you bypass the proxy for local addresses? It keeps prompting me for user id and password to access an intranet page

Similar Messages

Maybe you are looking for