How do you calibrate the compass iphone with ios7 out by 35deg.

Cant find anyway to calibrate the compass, is there one? Its out by 30-40 degs. And when changing it to true north it changes nothing, it still out by 30-40degs.

I just got a new 5S and I can't seem to get the calibration to be accurate. I have redone the calibration several times and it is always off by a few degrees.
I also have a 5 which once calibrated is totally fine.
Both phones were calibrated in the same spot so I doubt interference is a factor. Is there an issue my new 5S? Like I said I used the same procedure to calibrate both. The 5s is 2 -3 degrees off and the 5 is perfect.

Similar Messages

  • How do you calibrate the iPad battery?

    How do you calibrate the iPad battery and is it necessary to discharge battery 100%. I have  the 3 rd generation iPad, it has been almost a year since I purchased it and the battery when fully charged reads 100%. Recently, I visited my local Jump Plus store and the staff said I should drain the batteries on my iPad & iPhone completely until they are dead and recharge once a month. Is this accurate?  It is my understanding that you should not drain the batteries completely? Also, is that the same as calibrating the battery?

    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    http://www.apple.com/batteries/ipad.html

  • How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    How can you keep the highest iphone 4s Video quality the same when exporting it from iMovie.

    InDesign's PDF export engine does not transcode your videos, they are embedded exactly as they were in the original file. The Flash Player runtime which displays video inside PDF files may not show a perfect match to Quicktime etc. because most video playback tools aren't designed for a color-calibrated workflow, but they should be close.
    The playback quality (blocking and aliasing) will be affected if the clip is not playing at 100% (screen pixels != video pixels) and in PDFs with the standard video player widget, that will only ever happen when you use 'floating window' mode. PDF pages have physical dimensions, so viewing them at "100%" does not make them match screen pixels.
    If you don't mind the video clip being smaller than the media annotation in which it's playing, then use my free upgrade to the Acrobat playback widget - VideoPlayerX - which maintains 1:1 pixel scale until the page is zoomed out too far for it to fit. You can install the widget into InDesign so it's used by default when exporting.

  • How do you change the font color in CALL-OUT text boxes in PRO XI?

    How do you change the font color in CALL-OUT text boxes in PRO XI?

    It's not so simple to find it if you don't know what you're looking for... But it can be found via View - Show/Hide - Toolbar Items - Properties Bar.

  • How do you sync the wireless keyboard with the Ipad?  It doesn't ever find

    How do you sync the wireless keyboard to the Ipad

    Have you read the iPad manual (Page 22)?
    http://manuals.info.apple.com/enUS/iPad_UserGuide.pdf
    and the Bluetooth Keyboard manual:
    http://manuals.info.apple.com/enUS/Apple_Wireless_Keyboard_2009UG.pdf
    If your keyboard is already paired with another device that is in range then you must unpair it first (see page of the keyboard manual).

  • How do you use the bluetooth VIs with a Microsoft Bluetooth Driver?

    How do you use the LabVIEW Bluetooth VIs with the Microsoft Bluetooth driver?  I have been trying with no such luck.
       I want to use 2 computers to talk to each other using the bluetooth VIs.  Eventually, I think we would like a PDA/phone to talk to a custom built electronics board with Bluetooth.  But for now, I would just like 2 computers to talk and then eventually talk to our own device. 
    One is a desktop w/ the Belkin F8T012 USB adapter.  It installs fine with the Belkin driver (but I know I need to use the Microsoft Driver in order to use the LabVIEW VIs, but I have tried to get Windows to install its own but it says it is a BCM92045DG-Flash.  It says it cannot install it because it cannot find the necessary hardware.  I thought this USB adapter was on the approved Bluetooth devices list?  What else should I try?  Another Bluetooth USB adapter? 
    The other computer is a Dell Latitude 820.  It has a built in Bluetooth module which I believe is the Dell 350 Bluetooth Module.  On this machine I have been able to setup a COM port with a bluetooth device (blood glucose meter).  It came with a serial port interface which we modifed to go through a bluetooth interface.  It comes up as COM40. We have been able to communicate to it using their program originally designed to talk through a serial port.  But we would like to use the Bluetooth VIs in LabVIEW.  I can't even use the Discover VI.  Perhaps it is not using the Microsoft Driver as well.  Do I just uninstall the driver and then try to have Windows install its own driver?  Do you have any other recommendations?
    Thanks,
       Javi

    Hi Javi,
    This sounds like an issue with Windows and your specific Bluetooth devices.  As you mentioned, the LV Bluetooth VI's do require that the devices use the Windows drivers.  Take a look at this link for specific requirements for using Bluetooth with LabVIEW.  Also, you can take a look at our Developer Zone tutorial on designing Bluetooth applications a found here.  Regarding your device drivers, sometimes it is as easy as uninstalling the driver and then letting Windows discover the device and fine its own driver.  You could check out the Microsoft Knowledgebase for more information.  Thanks and have a great day!    
    Stephen S.
    National Instruments
    1 Test is worth 1000 expert opinions

  • How do you setup the Mail app with iCloud on an eMac?

    I have recently made an iCloud account on my iPad- includng a free "@me.com" email address, which I've been longing for! I do, however, have the old Apple eMac and would like to set up my "@me.com" email address. When I go to set it up, there is (on the pull down menu) ".Mac", which did not work, "IMAP", and "POP". I know iCloud cannot use "POP", so is there any way to do "IMAP" and how? Please help!

    For some reason, it won't connect to SMTP. I can get emails, but I can't write any. You said to do each port, but there is nothing asking for each port. I need help with the Mail application for Mac OS X v. 10.4.11 (Tiger). Can you help? The attached pics are the steps I've done...
    (Above) I filled in all it asks....
    (Above) Then I filled this in- I am trying to do it without typing "imap.mail.me.com" becuase if you see, it says "Example: mail.example.com"... (Below) It has failed...
    -NOW I WILL DO "imap.mail.me.com"- (Below)
    (Above) Then it gives me a pull-down list to choose from for the Outgoing Mail Server, so I just type: "smtp.mail.me.com" (below)....THEN YOU GET THE ERROR!

  • HT201441 How do you contact the previous owner with a partial email?

    How do you send an email to an unknown previous owner with only a partial email visible on an iCloud locked device? Is there a way to get the entire email address so the old owner can be contacted? There has to be a way to contact the previous owner.
    -bsides

    No, there is no way to get the complete email address. Turn the device in to the police.

  • How do you calibrate the touch display on an HP B210a?

    Well, I screwed up. I was messing around in the service menu (stupid me). I hit calibrate touch screen thinking it would be beneficial, but it ended up with me not knowing what I was doing, and now I cannot get the printer to respond to touch. So, how do I calibrate it so it works if I can't get it calibration? Please DONT say send it to HP, I really need to know how to do this on my own.

    I still need help

  • How do you increase the video size with a button?

    I'm trying to set up a demo for a meeting. I want to show how
    you can increase the size of the video.
    Example:
    http://video.google.com/videoplay?docid=-1532523169750528353
    There are two buttons in the bottom right corner of the
    player that will increase the video size.

    I havn't tried this but I would thinkg that this could work:
    If you have a video object on your stage (the object that the video
    actually plays in) you could probably make a button that simply
    changes the dimensions of it such as:
    setProperty("theVideoPlayer",_height, 240);
    setProperty("theVideoPlayer",_width, 320);
    The movie should adjust to fit the screen, however if you
    make the movie larger than or a different aspect ratio than the
    original, it will be blurred or distorted respectively. Make your
    original movie, therefore, at the largest size you want it to be
    seen. Keep the aspect ration the same always.

  • How do you get the compass to work with the maps app?

    When I am in my maps app it does not face me in the direction I am going? Its just the little blue indicator showing where I am? please advise!

    http://www.apple.com/iphone/how-to/#compass.compass-and-maps

  • HT1820 how do you restore the hard drive with install cd after zeroing out all files? when i try to boot install disk or from usb a kernel panic screen appears telling me to restart my computer.

    everytime i try to boot installation a message appears saying 'you need to restart your computer. holddown the power button until power is off then press down power button again'. i read that it was a kernel panic. cant boot into any modes but recovery mode with disk utilities but my wireless internet says no wifi hardware installed and sometimes startup manager. this just started after i erased the hard drive and had it overwritten with zeros. its a macbook pro 7,1. bought it in 2011, i think it was made in 2009. it has 320 gb of empty space right now and nothing ive tried seems to work. please help!!!! there is also no os x installed right now due to me zeroing out the hard drive how do i repair it so it will boot to installation?? i can also enter single user mode but do not have root access?

    You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    For Mac App Store: Apple - Support - Mac App Store.
    For iTunes: Apple - Support - iTunes.

  • How do you calibrate the monitor??

    for graphic design, the monitor's calibration is way off. but i can't figure out how to calibrate it!@#$%
    PLEASE HELP
    I can't be the only guy out there with this issue...
    Thanks
    This question was solved.
    View Solution.

    Hi,
    Please try:
       http://windows.microsoft.com/en-au/windows7/calibrate-your-display
    As a graphic designer, I would not use the screen of an AIO machine to do my work, I need a proper screen which may cost hundreds dollars more.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do you change the application associated with a subscription

    I have a license without a current user.  The license is a single application license associated with Photoshop.  I would like to change the associated application of this license to Acrobat and then assign a user.  How would I do this?
    Thank you

    Is that a TEAM account?
    Team license links that may help
    -http://www.adobe.com/creativecloud/buy/business.html
    -team plans https://creative.adobe.com/plans?plan=team
    -manage your team account http://forums.adobe.com/thread/1460939?tstart=0

  • How do you use the P1102W Printer with an Apple iPad?

    How can I print docs. from my iPad to the P1102W? Other printer manufacturers have a printer server app that would use WiFi or is there a way to have the printer as part of the cloud?

    Hi,
    Firstly please check to see if your printer in the list:
    http://support.apple.com/kb/ht4356
    If YES, you can use this to fix/setup:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If NO you have to print using other apps (if applicable) such as
       http://itunes.apple.com/au/app/hp-eprint-home-biz/id299531647?mt=8
    More info from this:
       http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Cloud-Services-Supported-Printers-ePrint-Airpr...
      http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Important-Information-for-ePrint-Home-amp-Biz-...
    Regards.
    ps. You also need your printer supports Network connection - Like any vendor, HP even has many more products. You have to buy the right want.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for